76) S. Mukherjee, A. Sarkar, Md J. Akhtar, I. Sk, N. Pakhira, Shibayan Roy, 'Experimental and theoretical investigations on the suitability of CuAlO2 delafossite for transparent electronics and dielectric applications', Submitted to Journal of Materials Chemistry C (2026).
75) J Renukaprasad, P V Rajeswari, Samarendra Roy, P Shyamala, K V Nagalakshmi, K Mery Zemira, Shibayan Roy, 'Ti-MAX/TiO2 layered Adsorbent-Photocatalyst: From Green Synthesis to Water Pollutant Removal', Submitted to Inorganic Chemistry Communications (2026)
74) S. Gupta, P. Gupta, A. Mahato, R. Halder, D. Chakraborty, A. D. Rollett, Shibayan Roy, 'Development of a data-driven statistical model for β-transus determination of titanium alloys and comparison with existing methods', Submitted to Metallurgical & Materials Transactions A (2026).
73) Md. F. Ussama J, M. Garai, Shibayan Roy, 'Understanding the synergistic role of microwa ve heating and nucleating agent on the crystallization, microstructure, mechanical property and machinability of SiO2–MgO-Al2O3–K2O–B2O3–F machinable glass-ceramics', International Journal of Applied Glass Science, Provisionally Accepted (2026).
72) Md. J. Akhtar, M. Garai, Shibayan Roy, 'Effect of internal crystallization on microstructure, phase evolution, bonding and mechanical property of leucite-based K2O-Na2O-Al2O3-SiO2-CaO-B2O3-MgO-Li2O-TiO2 glass-ceramics', Submitted to Advanced Engineering Materials (2026).
71) S. Sahoo, L. Germain, Shibayan Roy, 'The interrelation between micro- and bulk texture formation during β→α phase transformation in Ti-6Al-4V alloy', Journal of Alloys & Compounds (2026), Provisionally Accepted.
70) S. Sahoo, Shibayan Roy, 'An overview on the β→α phase transformation and associated micro-texture formation in (α+β) Titanium alloys', Journal of Materials Science & Technology, Under Review (2026).
69) A. Sarkar, S. Mukherjee, Md. J. Akhtar, N. Pakhira, Shibayan Roy, 'Mechanochemical synthesis of CuAlO2 ceramics: Structural, optical, dielectric and mechanical property evaluation', Journal of Materials Science, Under Review (2026).
68) A. Chakraborty, Shibayan Roy, 'A review on the experimental setups and measurement conditions related to the testing for shear localization and shear banding in materials', Advanced Engineering Materials, Provisionally Accepted (2026).
67) R. Halder, A.Mahato, S. Sahoo, J. T. Benzing, Shibayan Roy, A. D. Rollett, 'Site-specific texture and its influence on mechanical properties in direct energy deposited Ti-6Al-4V walls', Materials Science & Engineering A, 950 (2025) 149476.
66) S. Sahoo, Shibayan Roy, 'Fine-scale microstructure, dislocation substructure and elemental distribution in additive manufacturing of Ti-6Al-4V alloy', Journal of Materials Engineering and Performances, 35 (2025) 7411 - 7429.
65) S. Sahoo, Shibayan Roy, 'Origin morphology and orientation of microstructural features in uniaxially deformed Ti-6Al-4V alloys above the β-transus temperature', Journal of Alloys and Metallurgical Systems, 12 (2025) 100208.
64) A. Sarkar, S. Mukherjee, Md. J. Akhtar, N. Pakhira, Shibayan Roy, 'Mechano-chemical activation to synthesize CuAlO2: Phase analysis, structural and optical properties', Engineered Sciences, 9 (2025) 1-8.
63) A. Mahato, S. Mandal, M. Thangarasu, S. K. Sahoo, Shibayan Roy, 'Effect of multi-directional fiber architecture on the microstructure, mechanical and tribological properties of Cf-SiCm composites', Advanced Engineering Materials, 27 (2025) 1-24.
62) S. Sahoo, Shibayan Roy, 'Novel insights on the micro-texture formation in additive manufacturing of Ti-6Al-4V alloy', Materials Characterization, 226 (2025) 115159.
61) S. Gupta, A. Chakraborty, T. Reddy, Shibayan Roy, 'Heterogeneity in site-specific microstructure, porosity, micro-texture and mechanical properties in additive manufacturing of WSU 100 Ni superalloy', Materials Characterization, 225 (2025) 115156.
60) S. Roy, P. Sardar, A. Roy, Shibayan Roy, 'Effect of micro-alloying solute addition on the stacking fault energy of Al-Cu alloys: A computational and experimental approach', Journal of Applied Physics, 137 (2025) 105103.
59) A. Acharya, A. Mahato, Shibayan Roy, A. Das Gupta, A. Jain, 'Insights into The Mechanics of Fused Deposition Modelling Printed Novel Nested Auxetic Lattices', Smart Materials and Structures, 34 (2025) 035032.
58) S. Sahoo, Shibayan Roy, 'Micro-texture formation and the interrelation with bulk texture evolution in β deformation of Ti-6Al-4V alloy', Materials Characterization, 220 (2025) 114620.
57) A. Chakraborty, Shibayan Roy, 'Shear localization and shear banding: A review about the complex interplay between material, microstructural and process variables', Materials Characterization, 118 (2024) 114501.
56) S. Roy, A. Bhowmik, A. Tripathi, V. A. Baheti, Shibayan Roy, 'A diffusion-based understanding on the effect of trace Mn and Zr addition in the precipitate coarsening kinetics of Al-Cu alloy', Materials Letters, 377 (2024) 137390.
55) M. Garai, A. A. Reka, Shibayan Roy, 'Mechanical properties in spinel (MgCr2O4) phase containing Alumino-Silicate glass-ceramic', Characterization and Application of Nanomaterials, 7(2) (2024) 6042-6051.
54) S. Mandal, A. Mahato, Z. Alam, Shibayan Roy, Fabrication, characterization and suitability of 3D non-woven needle-punched preform Cf-SiCm composites for ultra-high temperature applications, Metallurgical & Materials Transaction A, 55 (2024) 4122 - 4145.
53) K. Shrivastava, K. Vijayan, S. Gupta, A. Mahato, Shibayan Roy, V. Arora, 'Welded joints stiffness and damping characterization based on model updating and texture analysis', Mechanical Systems and Signal Processing, 220 (2024) 111684.
52) S. Basu, A.C. Arohi, A. Mahato, D. Chakravarty, I. Sen, Shibayan Roy, 'Understanding the correlation between composition, microstructure and mechanical properties for spark plasma sintered (SPS) Alumina–Zirconia composites', Metallurgical and Materials Transactions A, 55 (2024) 2661-2690.
51) M. Chinnasamy, R. Rathanasamy, S.K. Palaniappan, S.K. Pal, P. Muthuswamy, R.R. Korrayi, Shibayan Roy, 'Implications of cryogenic treatment on microstructure, phase formation, mechanical and tribological properties of tungsten carbide cutting bits with varying cobalt content for mining applications', Journal of Refractory Metals and Hard Materials, 107 (2023) 106421.
50) M. Chinnasamy, R. Rathanasamy, S.K. Palaniappan, S.K. Pal, P. Muthuswamy, R.R. Korrayi, Shibayan Roy, 'Microstructure evolution, phase formation, mechanical and tribological response of deep cryogenically treated hard WC-6%Co cutting bits for mining applications', Journal of Materials Research and Technology, 27 (2023) 1293-1306.
49) S. Sahoo, Shibayan Roy, 'Novel insights on the grain boundary α phase microstructure formation and orientation development in Ti-6Al-4V alloy', Journal of Alloys and Compounds, 968 (2023) 172265.
48) G.K. Jana, S. Bera, R. Maity, T. Maity, A. Mahato, Shibayan Roy, H. Mohapatra, B.C. Samanta, 'Effect of an amine-aldehyde condensate modifier on the thermal and mechanical properties of fiber reinforced epoxy composites', Pigment & Resin Technology', 54(1) (2023) 29-38.
47) P. Nath, F. Scholz, J. Pfetzing, J. Frenzel, G. Eggeler, Shibayan Roy, I. Sen, 'Influence of microstructural homogenization on the localized deformation behavior of single crystal Ni-based superalloy, CMSX-4', Metallurgical and Materials Transactions A, 54 (2023) 4498 - 4514.
46) V. S. Seesala, R. Rajasekharan, A.K. Ojha, A. Mahato, R.R. Korrayi, B. Das, Shibayan Roy, S. Dhara, 'A novel functionally gradient hydroxyapatite coating for Zirconia-based implants', Surface & Coatings Technology, 469 (2023) 129817.
45) M. Garai, Shibayan Roy, ‘Performance evaluation for Ag & Au nanoparticle containing K2O-MgO-B2O3-Al2O3-SiO2-F glass sealants for SOFC application’, International Journal of Ceramic Engineering and Science, 5(2) (2023) 1-11.
44) Shibayan Roy, A. Sharma, A Chaudhuri, Y. Huang, T. G. Langdon, S. Suwas, ‘Microstructure evolution and mechanical response of a boron-modified Ti-6Al-4V alloy during high-pressure torsion processing’, Materials Science and Engineering A (2022) 144124.
43) S. Sahoo, O. Licata, B. Mazumder, Shibayan Roy, ‘Novel insights on the atomic scale spatial distributions of substitutional alloying and interstitial impurity elements in Ti-6Al-4V alloy’, Journal of Alloys and Compound, 907 (2022) 164511.
42) S Sahoo, A. Joshi, V. K. Balla, M. Das, Shibayan Roy, ‘Site-dependent microstructure, porosity and mechanical properties of LENSTM processed Ti-6Al-4V alloy’, Materials Science and Engineering A, 820 (2021) 141494.
41) E. Hoar, S. Sahoo, M. Mahdavi, S. Liang, Shibayan Roy, H. Garmestani, ‘Statistical modeling of microstructure evolution in a Ti-6Al-4V alloy during isothermal compression’, Acta Materialia, 210 (2021) 116827.
40) M. Garai, B Karmakar, Shibayan Roy, 'Cr+6 controlled nucleation in SiO2-MgO-Al2O3-K2O-B2O3-F glass sealant (SOFC)’, Frontiers in Materials, 7 (2020) 1-15.
39) B. K. Milligan, Shibayan Roy, C. S. Hawkins, L.F. Allard, A. Shyam, ‘Impact of microstructural stability on the creep behavior of cast Al–Cu alloys’, Materials Science and Engineering A, 772 (2020) 138697
38) A. Shyam, Shibayan Roy , D. Shin, L.F. Allard, Y. Yamamoto, J. R. Morris, B. Mazumder, J. D. Poplawsky, J. C. Idrobo, A. Rodriguez, T. R. Watkins, J. A. Haynes, 'Extreme microstructural stability at elevated temperature in cast aluminum-copper alloys', Materials Science and Engineering A, 765 (2019) 138279.
37) M. Garai, A. K. Maurya, Shibayan Roy, 'Zn2+-controlled crystallization and microstructure in K-Li-Mg-B-Si-Al-F glass', MRS Advances (2018) 1-9.
36) Shibayan Roy, S. Suwas, 'Unique texture transition during sub β-transus annealing of warm-rolled Ti-6Al-4V alloy: Role of orientation dependent spheroidization', Scripta Materialia, 154 (2018) 1-7.
35) I. Sen, Shibayan Roy, M. F.-X. Wagner, 'Indentation response and structure-property correlations in a bimodal Ti-6Al-4V alloy', Advanced Engineering Materials, 19 (2017) 1-12.
34) D. Shin, Shibayan Roy, T. R. Watkins, A. Shyam, 'Lattice mismatch modeling of Aluminum alloys', Computational Material Science, 138 (2017) 149-159.
33) P. Shower, Shibayan Roy, C. S. Hawkins, A. Shyam, 'The effects of microstructural stability on the compressive response of two cast Aluminum alloys up to 300oC', Material Science and Engineering A, 700 (2017) 519-529.
32) Shibayan Roy, S. Suwas, ‘Orientation dependent spheroidization response and macro-zone formation during sub β-transus processing of Ti-6Al-4V alloy’, Acta Materialia, 134 (2017) 283-301.
31) Shibayan Roy, L. F. Allard, A. Rodriguez, T. R. Watkins, A. Shyam, 'Comparative evaluation of cast Aluminum alloys for automotive cylinder heads: Part I – Microstructure evolution', Metallurgical and Materials Transaction A, 48 (2017) 2529-2542.
30) Shibayan Roy, L. F. Allard, A. Rodriguez, W.D. Porter, A. Shyam, 'Comparative evaluation of cast Aluminum alloys for automotive cylinder heads: Part II – Mechanical and thermal properties', Metallurgical and Materials Transaction A, 48 (2017) 2543-2562.
29) Aashranth B, Shibayan Roy, S. Suwas, ‘Effect of hypoeutectic boron modification on the dynamic properties of Ti-6Al-4V alloy’, Journal of Materials Research, 31(18) (2016) 2804-2816.
28) Shibayan Roy, G. Kannan, S. Suwas, M. K. Surappa, ‘Effect of extrusion ratio on the microstructure, texture and mechanical properties of (Mg/AZ91)m-SiCp composite’, Material Science and Engineering A, 624 (2015) 279-290.
27) S.T. Aruna, Shibayan Roy, A. Sharma. G. Savitha, V.K. William-Grips, 'Cost-effective wear and oxidation resistant electrodeposited Ni-pumice coating', Surface and Coatings Technology, 251 (2014) 201-209.
26) Shibayan Roy, S. Suwas, ‘Enhanced ductility of Ti-6Al-4V-0.1B alloy under superplastic deformation conditions by means of dynamic globularization’, Materials & Design, 58 (2014) 52-64.
25) Shibayan Roy, S. Suwas, ‘On the absence of shear cracking and grain boundary cavitation in secondary tensile regions of Ti-6Al-4V-0.1B alloy during hot (α+β)-compression', Philosophical Magazine, 94(5) (2014) 447-463.
24) Shibayan Roy, S. Suwas, ‘Crystallographic texture and microstructure evolution during hot compression of Ti-6Al-4V-0.1B alloy in the (α+β) regime’, Philosophical Magazine, 94(4) (2014) 358-380.
23) Shibayan Roy, S. Suwas, ‘Microstructure and texture evolution during sub-transus thermo- mechanical processing of Ti-6Al-4V-0.1B alloy: Part I. Hot rolling in (α+β) phase field’, Metallurgical & Materials Transaction A, 44 (2013) 3303-3321.
22) Shibayan Roy, S. Karanth, S. Suwas, ‘Microstructure and texture evolution during sub-transus thermo-mechanical processing of Ti-6Al-4V-0.1B alloy: Part II. Static annealing in (α+β) regime’, Metallurgical & Materials Transaction A, 44 (2013) 3322-3336.
21) Shibayan Roy, S. Suwas, ‘Deformation mechanisms during superplastic testing of Ti-6Al-4V-0.1B alloy’, Materials Science and Engineering A, 574 (2013) 205-217.
20) Shibayan Roy, S. Suwas, ‘The influence of temperature and strain rate on the deformation response and microstructural evolution during (α+β) hot compression of Ti-6Al-4V-0.1B alloy’, Journal of Alloys and Compounds, 548 (2013) 110–125.
19) P. Venkatachalam, Shibayan Roy, B. Ravisankar, V. Thamos Paul, M. Vijayalakshmi, S. Suwas, ‘Effect of processing routes on the evolution of texture heterogeneity in 2014 Aluminium alloy deformed by equal channel angular pressing (ECAP)’, Materials Science & Technology, 28 (2012) 1445-1458.
18) Shibayan Roy, Nataraj B. R., S. Suwas, S. Kumar, K. Chattopadhyay, ‘Microstructure and texture evolution during accumulative roll bonding of aluminium alloys AA2219/AA5086 laminates’, Journal of Materials Science, 47 (2012) 6402-6419.
17) Shibayan Roy, S. Suwas, S. Tamirisakandala, R. Srinivasan, D.B. Miracle, ‘Microstructure and texture evolution during β extrusion of hypoeutectic boron modified Ti-6Al-4V alloy’, Materials Science & Engineering A, 540 (2012) 152-163.
16) P. Venkatachalam, Shibayan Roy, V. Thomas Paul, M. Vijayalakshmi, B. Ravisankar, S. Suwas, ‘The role of processing routes on the evolution of microstructure and texture heterogeneity during ECAP of Al-Cu alloy’, Materials Science Forum, 702-703 (2012) 113-118.
15) Shibayan Roy, Nataraj B. R., S. Suwas, S. Kumar, K. Chattopadhyay, ‘Accumulative roll bonding of aluminium alloys 2219/5086 laminates: Microstructural evolution and tensile properties’, Materials & Design, 36 (2012) 529-539.
14) Shibayan Roy, S. Singh D., S. Suwas, S. Kumar, K. Chattopadhyay, ‘Microstructure and texture evolution during accumulative roll bonding of aluminium alloy AA5086’, Materials Science & Engineering A, 528 (2011) 8469-8478.
13) Shibayan Roy, V. Tungla, S. Suwas, ‘Effect of Hypoeutectic Boron Addition on the β-transus of Ti-6Al-4V Alloy’, Metallurgical & Materials Transaction A, 42 (2011) 2535-2541.
12) Shibayan Roy, S. Suwas, S. Tamirisakandala, D.B. Miracle, R. Srinivasan, ‘Development of solidification microstructure in boron modified alloy Ti-6Al-4V’, Acta Materialia, 59 (2011) 5494-5510.
11) P. Venkatachalam, Shibayan Roy, B. Ravisankar, V. Thomas Paul, M. Vijayalakshmi, S. Suwas, ‘Texture evolution in an Al–Cu alloy during equal channel angular pressing: the effect of starting microstructure’, Journal of Materials Science, 46 (2011) 6518-6527.
10) A. Sarkar, Shibayan Roy, S. Suwas, ‘X-ray diffraction line profile analysis of deformation microstructure in boron modified Ti–6Al–4V alloy’, Materials Characterization, 62 (2011) 35-42.
9) Shibayan Roy, A. Sarkar, S. Suwas, ‘On characterization of deformation microstructure in Boron modified Ti–6Al–4V alloy’, Materials Science & Engineering A, 528 (2010) 449-458.
8) S.R. Dey, Shibayan Roy, S. Suwas, J.J. Fundenberger, R.K. Ray, ‘Annealing response of the intermetallic alloy Ti–22Al–25Nb’, Intermetallics, 18 (2010) 1122-1131.
7) Shibayan Roy, B. Basu, ‘Hardness properties and microscopic investigation of crack–crystal interaction in SiO2–MgO–Al2O3–K2O–B2O3–F glass ceramic system’, Journal of Materials Science: Materials in Medicine, 21 (2010) 109-122.
6) Shibayan Roy, B. Basu, ‘On the development of two characteristically different crystal morphology in SiO2–MgO–Al2O3–K2O–B2O3–F glass-ceramic system’, Journal of Materials Science: Materials in Medicine, 20 (2009) 51-66.
5) Shibayan Roy, N. Gurao, S. Suwas, S. Tamirisakandala, R. Srinivasan, D.B. Miracle, ‘Texture evolution in boron modified Ti-6Al-4V alloy’, Ceramic Transactions, 200 (2008) 585-592.
4) Shibayan Roy, B. Basu, ‘Mechanical and tribological characterization of human tooth’, Materials Characterization, 59 (2008) 747-756.
3) Shibayan Roy, B. Basu, ‘In vitro dissolution behavior of SiO2–MgO–Al2O3–K2O–B2O3–F glass–ceramic system’, Journal of Materials Science: Materials in Medicine, 19 (2008) 3123-3133.
2) Shibayan Roy, B. Basu, ‘Microstructure development in machinable mica based dental glass-ceramics’, Trends in Biomaterials & Artificial Organs, 20 (2006) 90-100.
1) S. Maitra, Shibayan Roy, A.K. Bandhyapadhyay, ‘Synthesis of mullite from calcined alumina, silica and Al powder’, Industrial Ceramics 24 (2004) 39-41.
7) A. Mahato, S. Gupta, S. Sahoo, Shibayan Roy, 'Micro-textured regions (MTRs) in (α+β) Titanium alloys' in Advances in Microtexture: Measurements, Analyses, and Application, Ed. Satyam Suwas, David P. Field, Springer Nature Publications, 2025.
6) S. Senthil Kumar, M. Thangarasu, Shibayan Roy, S. T. Reddy Aruna, ‘Plasma Sprayed Ceramic Coatings for Solid Oxide Fuel Cells’, in Chapter 10: Advanced Ceramic Coatings for Energy Applications, Elsevier Publications, 2023.
5) S. Roy, Shibayan Roy, 'New-Age Al-Cu-Mn-Zr (ACMZ) Alloy for High Temperature-High Strength Applications: A Review', in Aluminium Alloys - Design and Development of Innovative Alloys, Manufacturing Processes and Applications, InTech Open Publications (2022).
4) S. Sahoo, Shibayan Roy, 'Additive manufacturing of Titanium alloys: Microstructure and texture Evolution, defect formation and mechanical response', Chapter 8: Additive manufacturing: A tool for industrial revolution 4.0, Elsevier Publications (2021).
3) Shibayan Roy, 'Boron Addition to Titanium Alloys: Microstructure & Texture Evolution', LAP Lambert Academic Publishing, Germany, 2016
2) S. Suwas, D. B. Miracle, S. Tamirisakandala, R. Srinivasan, Shibayan Roy, ‘Study of crystallographic texture during thermo-mechanical processing of Boron modified Ti-alloys’, Ft. Belvoir: Defense Technical Information Center, USA, 2009.
1) S. de-Waziers, Shibayan Roy, S. Suwas, S. Tamirisakandala, R. Srinivasan, D.B. Miracle, ‘Solidification microstructure and texture in grain-refined titanium alloys’, in Microstructure and Texture in Steels, Chapter 33 (2008) 475-483, Springer Publication.
1) P.V. Rajeswari, Shibayan Roy, S. Roy, P. Shyamala, K. V. Nagalakshmi, Prakash H. R., A Method for Synthesizing Layered Titanium Carbide Nanostructures for Use in Visible-Light Photocatalytic Water Treatment, Indian Patent Application No.202541013618 A, Filed on February 18, 2025.
2) A. Shyam, Y. Yamamoto, D. Shin, Shibayan Roy, J. A. Haynes, P. Maziasz, A. Sabau, A. Rodriguez, J. A. Gonzalez, J. Talamantes, L. Zhang, S. Mirmiran and C. Glaspie, “Aluminum alloy compositions and methods of making and using the same”, US Patent Application Number 20170335437, Filed on May 20, 2016.
7) A. Shyam, S. Hawkins, Shibayan Roy, S. Dryepondt, D. Erdman, B. Pint, P. Maziasz, 'The effect of steam on the elevated temperature high cycle fatigue life of HAYNES 282® superalloy', Proceedings of 10th Liège Conference on Materials for Advanced Power Engineering, 2014.
6) A. Sabau, W. D. Porter, A. Shyam, Shibayan Roy, ‘Process simulation role in the development of new alloys based on integratedcomputational material science and engineering’, Proceedings of ASME 2014 International Mechanical Engineering Congress & Exposition.
5) Shibayan Roy, S. Suwas, S. Tamirisakandala, R. Srinivasan, D.B. Miracle, ‘Microstructure and texture evolution during β processing of hypoeutectic boron modified Ti-6Al-4V Alloy’, Proceedings of The 12th World conference on Titanium 2011, vol. 1, 689-693.
4) Shibayan Roy, S. Suwas, S. Tamirisakandala, R. Srinivasan, D.B. Miracle, ‘Processing response of boron modified Ti-6Al-4V alloy in (α+β) working regime’, Supplemental Proceedings TMS 2009, vol. 3, 63-70.
3) Shibayan Roy, N. Gurao, S. Suwas, S. Tamirisakandala, R. Srinivasan, D.B. Miracle, ‘Texture evolution in boron modified Ti-6Al-4V alloy’, Proceedings of the 15th International Conference on Textures of Materials (ICOTOM 15), 2008.
2) Shibayan Roy, ‘Grain refined boron modified Ti-6Al-4V alloy: Role of Ti-B compound in texture evolution’, Proceedings of International Symposium for Research Scholars (ISRS) 2008, 203-207.
1) Shibayan Roy, ‘Microstructure evaluation of machinable mica based glass ceramics for dental applications’, Proceedings of International Symposium for Research Scholars (ISRS) 2004.