ACADEMIC DETAILS

WORKING EXPERIENCES

AREA OF INTEREST

PROJECT HANDLED

· Innovation of “Automatic Temperature detection and attendance monitoring device with sanitization” for COVID 19 which was published in newspapers like “Times of India” and “Telegraph” etc. on 17h June 2020.

· Innovation of “Viroreeper” for COVID 19 which was published in newspapers like “Times of India”, “Telegraph” and “Asamiya Pratidin” etc. on 13th May 2020.

· 3D printed face shield for doctors of Excelcare Hospital to combat COVID 19 on 13th April 2020.

· R.P.S. Project entitled- “Investigation of wind Shear during downburst” – under Dr. Kalyan Kumar Das

· Optimization of aerodynamic section of airscrew considering Prandilt’s tip loss- under Dr. Kalyan Kumar Das

· Blade Design of propeller and wind turbine.

· Analysis of foil using linear zed velocity potential also performance analysis of air foil considering within subsonic range.

· 3D modeling, Assembling, Analyzing of Rock Crusher Machine in Torsa Pvt. Ltd., Amingaon, Assam for Unique Consultancy, Guwahati

· 3D Modeling of machine parts, CNC Machining in Indo German Tool Room, Aurangabad

TRAINING AND CONFERENCE ORGANIZED

· One week Short Term Course on “" 3D Printing and its Biomedical Engineering Applications" jointly organized by organized by IIC – RGU, (MHRD), National Cheng Kung University Hospital (NCKUH), Taiwan, Taiwan, North Eastern Hill University (NEHU), Shillong, Meghalaya, India, 12-16 October 2020. (Funded by National Cheng Kung University Hospital , Taiwan)

· Organized webinar on "Basics of Metrology and Understanding Importance of Measurement and Calibration Concepts: Fluke Corporation" on 29th September 2020 in association with Fluke Corporation.

· Organized webinar on "Edge Computing for business-critical industrial applications: Stratus Technologies" on 28th September 2020 in association with Stratus Technologies.

· Conducted two days' online workshop om MATLAB on the topics "Designing for Reliability & Robustness with MATLAB Base Engine" and "Artificial Intelligence & Machine Learning Using MATLAB" on 18-19th Augast 2020.

· Organized webinar on "Future of EV and Robotics: HIOKI Japan" on 31st July 2020 in association with HIOKI Japan.

· IoT based Robotic Training for RGU students 24-25 January 2019.

· 3D printing workshop for the students of RGU in collaboration with KNOWHOW 3D on 16 May 2018 at RGU.

· Vikram Sarabhai Space Exhibition (VSSE) in association with Indian Space Research Organization (ISRO), Ahmedabad at RGU dated 7th and 8th (Thursday and Friday) of September 2017.

· Workshop on “Ethical Hacking & Cyber Security” on 12 Nov 2016 in collaboration with GRATIA TECHNOLOGY PVT LTD.

· Awareness program on “Support for Entrepreneurship and Managerial Development of SMEs: through Incubators” in collaboration with MSME Guwahati on 21 March 2017.

· National Conference on Emerging Trends in Engineering: Opportunities in North-East (ETIE-2016), 28-29 April 2016 at Royal School of Engineering and Technology, Guwahati-35.

· National Conference on Wind disasters Problems ahead in North-East 12-13 February 2012 at Royal School of Engineering and Technology, Guwahati-35 (Funded by AICTE).

· Short Term Training Program on AutoCAD form February to May 2016 at Royal School of Engineering and Technology, Guwahati-35.

· Short Term Training Program on CATIA form February to May 2016 at Royal School of Engineering and Technology, Guwahati-35.

PUBLICATIONS

JOURNALS

1. Das H.R., Bhatia D, Das K.K, & Mishra A “Development of Viroreaper sanitization chamber for COVID 19” International Journal of Sensors International 28 October 2020, ISSN 2666-3511.

2. Das H.R., Das K.K, Patowary A.,"A Study on C, H and L Type Prismatic Buildings for Synoptic Wind Flow", International Journal of Construction Engineering and Planning, Vol. 6, pp. 6-14, 2020, ISSN: 2456-2335

3. Das, H. R., & Patowary, A. “Uses of 3d printing for production of PPE for COVID 19 like situations: Scope and future.” American Journal of Preventive Medicine and Public Health. Vol. 6: pp 76-79, 202, E-ISSN 2576-3741.

4. Das H.R., Das K.K, "Optimization of Roof Angle for Sloping Roof Buildings under Extreme Wind Conditions", Journal of Construction Engineering, Technology and Management, Vol. 9, pp. 1-5, 2019, ISSN: 2249-4723.

5. Das, H. R., & Das, K. K. “Numerical Investigation of the Effect of Downburst Wind on Buildings with Various Geometrical Shapes.” Journal of Aerospace Engineering & Technology. Vol.7, pp 1-5, 2017, ISSN: 2231-038X.

6. Das K.K, Das H.R., Ghosh A.K., Sinhamahapatra K.P., "Damage Potential of Extreme Wind Events– Downburst and Tornado", Journal of Aerospace Engineering & Technology, Vol. 24-46, pp. 1-5, 2016, ISSN: 2231-038X.

7. Das K.K, Das H.R., Ghosh A.K., “Numerical Investigation of the Interference Effect of Prismatic Buildings Placed in Tandem Arrangement due to Synoptic wind profile”, International Journal of Applied Mathematics and Mechanics, Vol. 10, pp: 41-59, 2015, ISSN: 0973-0184.

CONFERENCES/BOOK CHAPTERS

1. Das H.R., Das K.K and S. Jain "Effect of Downburst Wind on Buildings with various Geometrical Shapes", International Conference on engineering Analysis, Modeling, Simulation and 3D-Printing (NAFEMS-3D), Jaipur, 28th – 31st Aug 2016.

2. Das H.R., Das K.K, S. Jain "A numerical study of wind induced internal and external fields on a low rise buildings with wall openings for downburst wind", National Conference on Emerging Trends in Engineering: Opportunities in North-East, Guwahati, 28th and 29th April 2016. ISBN 978-93-83588-12-1.

3. Das H.R., Das K.K, and S. Jain “An experimental and numerical validation of pressure distribution of high rise prismatic building using wind tunnel", National Conference on Emerging Trends in Engineering: Opportunities in North-East, Guwahati, 28th and 29th April 2016, ISBN 978-93-83588-12-1.

4. Das H.R., Das K.K, S. Jain "Numerical Simulation of Rectangular Fins using Carbon Foam", National Conference on Emerging Trends in Engineering: Opportunities in North-East, Guwahati, 28th and 29th April 2016, ISBN 978-93-83588-12-1.

5. Das H.R., Das K.K, S. Jain "Numerical investigation of Compressible flow for Different Shapes C-N nozzle", National Conference on Emerging Trends in Engineering: Opportunities in North-East, Guwahati, 28th and 29th April 2016, ISBN 978-93-83588-12-1.

6. Das H.R., Das K.K and S. Jain "A numerical Study of Wind Induced External and Internal flow fields on a Prismatic building with wall openings", National Seminar on “Green Energy-Prospects and Challenges”, Guwahati, 26th and 27th April 2016, ISBN 978-93-83588-11-4.

7. Das H.R., Das K.K, S. Jain "Effect of Downburst Wind on Building and Interference effects ", National Seminar on “Green Energy-Prospects and Challenges”, Guwahati, 26th and 27th April 2016, ISBN 978-93-83588-11-4.

8. Das H.R., Das K.K, S. Jain "Comparison Downburst and Synoptic Wind Effects on Prismatic Buildings", National Seminar on “Green Energy-Prospects and Challenges”, Guwahati, 26th and 27th April 2016, ISBN 978-93-83588-11-4..

9. Das H.R., Das K.K, A. Ghosh “Optimization of slope for sloped roofed buildings under downburst wind flow using ANSYS", International conference on recent trends in engineering and material sciences, Jaipur, 17-19 March 2016, ISBN 978-93-5254-230-7.

10. Das H.R., Das K.K, J. Pathak and A. Ghosh “Investigation and comparison of flow dynamics around a prismatic building due to downburst and synoptic wind", National Conference on New Frontiers in Civil Engineering: Challenges and Opportunities in North-East India, Guwahati, 5th and 6th Nov 2015.

11. Das H.R., Das K.K and A. Ghosh “Numerical simulation of wind flow around multiple buildings", 16th AeSI Annual Symposium, Aeronautical Society of India, Bangalore, 11-12 August, 2014.

12. Das H.R., Das K.K and A. Ghosh “A Numerical Study of Wind Induced External and Internal Flow Fields on a Prismatic Building with Wall Openings Buildings", 16th AeSI Annual Symposium, Aeronautical Society of India, Bangalore, 11-12 August, 2014.

13. Das H.R., Das K.K and A. Ghosh “Wind Effects on Prismatic Structure for different Orientation", National Conference on Innovations in Design & Construction of Industrial Structures (IDCIS-2014), Durgapur, 3-5 April, 2014.

14. Das H.R., Das K.K and A. Ghosh “A study of interference effect on prismatic building due to synoptic wind flow. “, International Conference on Green Energy & Smart Materials Through Science, Technology and Management (GESM 2014), Guwahati, 21-13 Jan-2014.

15. Das H.R., Das K.K and A. Ghosh “Numerical simulation of sloped roofed building for synoptic wind flow.", International Conference on Green Energy & Smart Materials Through Science, Technology and Management (GESM 2014), Guwahati, 21-13 Jan-2014.

16. Das H.R., Das K.K and A. Ghosh “Numerical investigation of the interference effect on prismatic buildings due to synoptic wind flow", 15th AeSI Annual Symposium, Aeronautical Society of India, Bangalore, 9-10 August, 2013.

17. Das H.R., Das K.K and A. Ghosh “Numerical Investigation of Dry Microburst Wind near Prismatic Building using ANSYS ", 13th AeSI Annual Symposium, Aeronautical Society of India, Bangalore, 10-11 August, 2011.

18. Das K.K., Das H.R and A. Ghosh “Simulation of dry microburst wind using ANSYS", FIFTH ICTACEM, 2010, IIT Kharakpur, 27-29 Dec-2010.

19. Das K.K., Das H.R and A. Ghosh “Simulation of impinging jet model ", Australian Wind Engineering Association (CWE2010), Australia, 23-27, May-2010.

PROJECT ACCOMPLISHED

Particulars

Preparation of Detail Project Report (DPR) including Urban Road Survey and Soil Testing for Improvement of Urban Road Network in Dhemaji Master Plan area.

Preparation of Detail Project Report (DPR) including Plot Survey and Soil Testing for “Vendors Rehabilitation Centre” NLP.

4 lane N.H.‐32 Road Survey, Earth work calculations. Plot Survey and Volume Calculation for Diphu Govt. Bus workshop .

Plot Survey and Volume Calculation for Diphu Bus Terminus

Preparation of Detail Project Report (DPR) including Plot Survey and Soil Testing for Howly Tourist Lodge.

Preparation of Detail Project Report (DPR) including Plot Survey and Soil Testing for Commercial Building of NLMB.

Preparation of Detail Project Report (DPR) including Plot Survey and Soil Testing for a Commercial Complex.

Preparation of Project for MICRO WATER SHED DRAINAGE Report including Survey for KHAULAPUR, UDALGURI.

Preparation of Project for MICRO WATER SHED DRAINAGE Report including Survey for SIMALGURI, UDALGURI.

Road Survey and Designing of IPROVEMENT/CONSTRUCTION OF ROAD BALIPARA –MISSAMARI.

Road Survey and Designing of IPROVEMENT/CONSTRUCTION OF Twang Road.

CERTIFICATIONS