How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-01 · 8 min read · Independent comparison
• Hilitand Gaming Headphone Cable — biggest strength: a 6.5 ft oxygen-free copper braided cable with a 3.5mm gold-plated plug on one end and a 2.5mm stereo plug on the other, built for wired head-mounted gaming headsets.
• Hilitand Gaming Headphone Cable — biggest trade-off: it is a cable only. It does nothing for storage or desk clutter, and it is aimed at specific headset families rather than every headphone on the market.
• HomeMount Headphone Hook — biggest strength: a two-pack of adhesive hooks that stick to the side of a desk or PC case and hold a headset, controller, purse or cable, with a soft non-slip pad to protect the finish of what you hang.
• HomeMount Headphone Hook — biggest trade-off: it holds things, it does not connect or power anything, and the adhesive mount is permanent enough that placement deserves a moment of thought before you press it down.
• Who each pick is for: the Hilitand cable is for someone whose wired headset needs a working connection to a Windows PC; the HomeMount hooks are for someone whose gear works fine but lives in a mess on the desk.
The Hilitand cable is a straightforward piece of kit: a wired AUX cable with a male-to-male connector layout and three pins, roughly 1.9 m (about 6.5 ft) long, made from oxygen-free copper with a multi-strand core and wrapped in a braided synthetic fiber jacket. One end is a 3.5mm gold-plated plug, the end you plug into your computer. The other is a 2.5mm stereo plug, the end that seats into the headset itself. That two-plug design is the whole point of the product, and it is why the compatibility list matters so much.
The manufacturer lists it as suitable for G4ME ONE, ZERO, PC 373D, PC37X, and GSP 350, 500 and 600 headsets, plus other head-mounted gaming earphones. If you own one of those, the value proposition is easy to understand: headsets in that family use a detachable cable, those cables get lost, chewed by a chair wheel, or frayed at the strain relief, and replacing the whole headset over a bad cable is a waste. This cable is the cheaper, more sensible fix. It is also small and light — 31.5 g, small enough to sit in the palm of your hand — so it travels fine in a bag, drawer or desk tray.
As for who should skip it: anyone with a Bluetooth headset, anyone using a headset with a fixed (non-detachable) cable, and anyone whose headset terminates in a plain 3.5mm jack rather than the 2.5mm headset-side connection. This is a specific replacement part, not a universal adapter. If you are not sure which plug your headset uses, check the jack on the ear cup before buying. Also worth knowing: the listing notes that new and old versions ship randomly, so what arrives is the same design and length, but the exact batch can differ. In my opinion, this is the kind of purchase you make because you already know your headset model number — not because you are browsing.
The HomeMount hook is a storage accessory, and it is honest about that. You get two hooks in the box, in black, made from ABS and TPU. The ABS gives the body its rigidity; the TPU is the soft part that contacts your gear, and that matters because the whole job of this thing is to hold a headset without scuffing the headband or scratching a controller shell. The design is described as simple and modern, and it is meant to be stuck to the side of your desk or your computer case rather than sitting on top of the desk.
Installation is adhesive-based, and the manufacturer's own instructions are worth following: peel the backing, press the hook where you want it, then leave it for 24 hours before hanging anything. The listing mentions support for items under roughly 5 lbs in one place and a maximum weight capacity of 2 pounds in the specifications, so the sensible reading is that this is for headphones, controllers, purses, cables, jewelry and schoolbags — normal desk objects — not for anything heavy or expensive that would be a disaster if it let go.
That leads to the real trade-off. Adhesive mounting is fast, requires no drilling, and works on smooth surfaces. It is also, by nature, semi-permanent. If you stick it to a painted desk edge and later want it somewhere else, you may be dealing with residue. Think about placement before you commit. The other thing to understand is that this product solves organization, not function. It will not fix a headset that will not connect to your PC. It will not charge a controller. What it does is get the headset off the desk and within reach, and for a lot of people that alone is worth it — a headset sitting loose on a desk gets rolled over by a keyboard, tangled in a mouse cable, or knocked to the floor. Two hooks means you can hang the headset on one and the controller on the other, which is a genuinely tidy little setup for a gaming desk, home office or recording corner.
• Best for fixing a headset connection to a Windows PC → Hilitand Gaming Headphone Cable. The 3.5mm plug goes to the computer, the 2.5mm plug goes to the headset.
• Best for desk organization → HomeMount Headphone Hook. It frees up desk space and keeps the headset within reach instead of in a heap.
• Best for specific headset models → Hilitand. It is listed for G4ME ONE, ZERO, PC 373D, PC37X and GSP 350/500/600, so ownership of one of those is the deciding factor.
• Best for mixed gear → HomeMount. The hooks are described as fitting not just computer headphones but also XBOX, PS4 and PS5 controllers, desktop headsets, purses and bags.
• Best for cable length and reach → Hilitand. At roughly 6.5 ft, there is enough slack to sit back from the desk without tugging the headset off your head.
• Best for protecting your gear's finish → HomeMount. The soft TPU contact surface is designed to prevent scratches on whatever you hang.
• Best for travel and portability → Hilitand. At 31.5 g it is pocket-sized; the hooks are meant to stay put once installed.
• Best for a gift → HomeMount. Two hooks in a small package is an easy, low-risk present for someone with a cluttered desk.
The honest answer is that these are not competitors. If your headset does not work with your PC, buy the cable. If it works fine and your desk is a disaster, buy the hooks. Plenty of people would benefit from both, and there is no conflict in owning them at the same time.
If I had to pick one, I would buy the Hilitand Gaming Headphone Cable — but only because of the specific situation it solves. A broken or missing cable turns a perfectly good headset into a paperweight, and this is the direct fix for a defined list of headset models, with a braided oxygen-free copper build that should stand up to daily plugging and unplugging. It restores function. The HomeMount hooks only improve tidiness, and tidiness can wait. That said, if your headset already works and you are tired of it living on your keyboard, I would take the two-pack of hooks without hesitation. Check the current price on Amazon for whichever one matches your problem, and confirm your headset model before ordering the cable.
how to connect headphones to windows pc
Plug the 3.5mm end of the cable into your computer's audio jack and the 2.5mm stereo plug into the headset. Windows should detect the headset automatically; if audio still plays through your speakers, open your sound settings and select the headset as the output device. For Bluetooth or USB headsets the steps differ — this cable is for wired, detachable-cable gaming headsets.
how to connect headphones to pc windows 10
The process is the same as any recent Windows version: connect the cable, then go to Settings, then System, then Sound, and choose the headset as your output. If your PC has separate mic and headphone jacks, make sure the 3.5mm plug is in the right one. A headset with a detachable cable, like the models this Hilitand cable is listed for, needs the 2.5mm end seated firmly in the ear cup first.
how can i connect my headphones to my pc
First check what your headset actually uses. If it has a detachable cable with a small 2.5mm socket on the ear cup, a replacement cable like the Hilitand one is what you need. If it has a fixed 3.5mm plug, plug it straight into the PC and select it in your sound settings. If it is wireless, pair it over Bluetooth or use its USB receiver instead.
how to use headphones on pc
Once connected, set the headset as both your playback and recording device in Windows sound settings so the mic and speakers both route through it. Keep the cable slack rather than taut, and if you are not using the headset, hang it rather than leaving it on the desk — which is exactly where a pair of adhesive hooks like the HomeMount ones earns its place.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: HopePow 2 vs Ugreen Magnetic USB C, Aptkdoe Earbuds 75H vs Yworlln NE76, Tuitager 9S vs AOC Gaming Headset: Wireless Headphones, Black Shark Gaming Headset vs HEGMUXCO Computer Speakers