Publications

Henein, H., Advanced micro alloyed steels for sustainable pipelines, CIM Distinguished Lecture, CIM Ft. McMurray Chapter, May 25, 2017.

Henein, H., Quantification of solidification path in rapid solidification using 3D measurements, CIM Distinguished Lecture: McMaster, January 16, 2017; UBC, January 20, 2017; McGill, March 24, 2017; UofT, May 11, 2017.

Henein, H., Advanced Microalloyed Steels for Sustainable Pipelines, Advances in Materials and Manufacturing Symposium, COM 2017, Vancouver, Aug. 27-30, 2017, Keynote.

Henein, H., Mechanism of a Rapidly Solidified Structure in Spray Forming, M. Jolly, Defects and Properties of Cast Metals, 2017 TMS Annual Meeting & Exhibition, February 27 – March 2, 2017.

Henein, H., Developing Sustainable Pipelines, 3rd Pan American Materials Congress, 2017 TMS Annual Meeting, Feb 2017.

Henein, H., Modelling and validation of rapidly solidified alloy structures, 8th International Conference on the Multiscale Materials Modelling, Dijon, France, 9-14 October, 2016.

Henein, H., An assessment of some experimental techniques for the study of rapid solidification of alloys, COM 2016, Quebec City, Sept. 12, 2016.

Henein, H., An assessment of some experimental techniques for the study of rapid solidification of alloys, Cranfield University, UK, July 11, 2016.

Bogno, A.-A., Riveros, C., Dahlborg, U., Calvo-Dahlborg, M., Ciftci, N., Henein, H., Rapid solidification characteristics of bulk metallic glasses, COM 2015, Toronto, ON, Aug. 23-26, 2015, Keynote.

H. Henein, Characterizing melt and solidified structure to diagnose additive manufacturing processes, Lawrence Livermore Laboratories, Livermore, CA, Feb. 12, 2015.

As per the Tri-Agency Open Access Policy on Publications, Open Access versions of the papers listed below can be found in the Education and Research Archive of the University of Alberta. The published versions can be accessed using the DOI listed for each paper.

Valloton, J., Bogno, A.-A., Rappaz, M., Henein, H.

Numerical Model of Rapidly Solidified Droplets of Al–33 Wt Pct Cu Eutectic Growth

(2022) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 53 (2), pp. 460-469.

DOI: 10.1007/s11661-021-06504-1

Yin, S., Bogno, A.-A., Henein, H., Gallerneault, M.

On the Role of Sc in Powders and Spray Deposits of Hypoeutectic Al–Mg Alloys

(2022) Journal of Phase Equilibria and Diffusion.

DOI: 10.1007/s11669-021-00934-5

Flood, R.S.P., Henein, H.

On the role of orifice wetting for Al and Al22.5 wt%Cu with Al2O3 in the discharge crucible method

(2022) Journal of Molecular Liquids, 345, art. no. 117843.

DOI: 10.1016/j.molliq.2021.117843

Ghasri-Khouzani, M., Li, X., Bogno, A.A., Chen, Z., Liu, J., Henein, H., Qureshi, A.J.

Fabrication of aluminum/stainless steel bimetallic composites through a combination of additive manufacturing and vacuum-assisted melt infiltration casting

(2021) Journal of Manufacturing Processes, 69, pp. 320-330.

DOI: 10.1016/j.jmapro.2021.07.047

Gancarz, T., Dobosz, A., Bogno, A.-A., Cempura, G., Schell, N., Chulist, R., Henein, H.

Characterization of rapidly solidified Al-Mg-Sc alloys with Li addition

(2021) Materials Characterization, 178, art. no. 111290.

DOI: 10.1016/j.matchar.2021.111290

Li, X., Ghasri-Khouzani, M., Bogno, A.-A., Liu, J., Henein, H., Chen, Z., Qureshi, A.J.

Investigation of compressive and tensile behavior of stainless steel/dissolvable aluminum bimetallic composites by finite element modeling and digital image correlation

(2021) Materials, 14 (13), art. no. 3654.

DOI: 10.3390/ma14133654

Rojas, J.G.M., Ghasri-Khouzani, M., Wolfe, T., Fleck, B., Henein, H., Qureshi, A.J.

Preliminary geometrical and microstructural characterization of WC-reinforced NiCrBSi matrix composites fabricated by plasma transferred arc additive manufacturing through Taguchi-based experimentation

(2021) International Journal of Advanced Manufacturing Technology, 113 (5-6), pp. 1451-1468.

DOI: 10.1007/s00170-020-06388-2

Lehmann, T., Rose, D., Ranjbar, E., Ghasri-Khouzani, M., Tavakoli, M., Henein, H., Wolfe, T., Jawad Qureshi, A.

Large-scale metal additive manufacturing: a holistic review of the state of the art and challenges

(2021) International Materials Reviews.

DOI: 10.1080/09506608.2021.1971427

Junior, C.E.S., Reyes, R.V., Gomes, L.F., Spinelli, J.E., Bogno, A.-A., Henein, H.

Evaluation of Microstructures and Hardness of Al-10Si-0.45Mg-0.4Sc Alloy Powders

(2021) Minerals, Metals and Materials Series, 6, pp. 270-276.

DOI: 10.1007/978-3-030-65396-5_40

Henein, H., Bogno, A.-A., Hearn, W., Valloton, J.

Metastable Dendrite Morphologies in Aluminum Alloys

(2020) Journal of Phase Equilibria and Diffusion, 41 (6), pp. 784-792.

DOI: 10.1007/s11669-020-00833-1

Lehmann, T., Jain, A., Jain, Y., Stainer, H., Wolfe, T., Henein, H., Qureshi, A.J.

Concurrent geometry- and material-based process identification and optimization for robotic CMT-based wire arc additive manufacturing

(2020) Materials and Design, 194, art. no. 108841.

DOI: 10.1016/j.matdes.2020.108841

El Moghazi, S.N., Wolfe, T., Ivey, D.G., Henein, H.

Plasma transfer arc additive manufacturing of 17-4 PH: assessment of defects

(2020) International Journal of Advanced Manufacturing Technology, 108 (7-8), pp. 2301-2313.

DOI: 10.1007/s00170-020-05540-2

Bogno, A.-A., Henein, H., Ivey, D.G., Valloton, J., Reinhart, G., Sediako, D., Gallerneault, M.

Effects of scandium on rapid solidified hypo-eutectic aluminium copper

(2020) Canadian Metallurgical Quarterly, 59 (1), pp. 101-115.

DOI: 10.1080/00084433.2019.1696606

Gawor, S., Wiskel, J.B., Ivey, D.G., Liu, J., Henein, H.

Time dependence of hydrogen induced cracking of X70 pipeline steel under severe and mild sour service conditions using ultrasonic analysis

(2020) Proceedings of the Biennial International Pipeline Conference, IPC, 3, art. no. V003t05a024.

DOI: 10.1115/IPC2020-9787

Dias, M., Oliveira, R., Kakitani, R., Cheung, N., Henein, H., Spinelli, J.E., Garcia, A.

Effects of solidification thermal parameters and Bi doping on silicon size, morphology and mechanical properties of Al-15wt%Si-3.2wt%Bi and Al-18wt%Si-3.2wt%Bi alloys

(2020) Journal of Materials Research and Technology, 9 (3), pp. 3460-3470.

DOI: 10.1016/j.jmrt.2020.01.083

Valloton, J., Bogno, A.-A., Henein, H., Herlach, D.M., Sediako, D.

Scandium Effect on Undercooling and Dendrite Morphology of Al-4.5 Wt Pct Cu Droplets

(2019) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50 (12), pp. 5700-5706.

DOI: 10.1007/s11661-019-05463-y

Kennedy, J.R., Wiskel, J.B., Ivey, D.G., Henein, H.

L80 pipe steel microstructure assessment using ultrasonic testing

(2019) Materials Science and Technology (United Kingdom), 35 (16), pp. 1942-1949.

DOI: 10.1080/02670836.2019.1656370

Huang, W., Luo, J.-L., Henein, H., Jordan, J.

Sulfide stress cracking assessment of low-alloy L80 casing steel in H2S environment

(2019) Anti-Corrosion Methods and Materials, 66 (4), pp. 379-387.

DOI: 10.1108/ACMM-08-2018-1984

Herlach, D.M., Burggraf, S., Reinartz, M., Galenko, P.K., Rettenmayr, M., Gandin, C.-A., Henein, H., Mullis, A., Ilbagi, A., Valloton, J.

Dendrite growth in undercooled Al-rich Al-Ni melts measured on Earth and in Space

(2019) Physical Review Materials, 3 (7), art. no. 073402.

DOI: 10.1103/PhysRevMaterials.3.073402

Bogno, A.-A., Valloton, J., Jimenez, D.D., Rappaz, M., Henein, H.

Rapid solidification of Al-Cu droplets of near eutectic composition

(2019) IOP Conference Series: Materials Science and Engineering, 529 (1), art. no. 012021.

DOI: 10.1088/1757-899X/529/1/012021

Bogno, A.-A., Hearn, W., Spinelli, J.E., Valloton, J., Henein, H.

Quantification of microstructure to reveal the solidification path of an alloy

(2019) IOP Conference Series: Materials Science and Engineering, 529 (1), art. no. 012056.

DOI: 10.1088/1757-899X/529/1/012056

Gomes, L.F., Spinelli, J.E., Bogno, A.-A., Gallerneault, M., Henein, H.

Influence of annealing treatment on Si morphology and strength of rapid solidified Al-12 wt% Si powders

(2019) Journal of Alloys and Compounds, 785, pp. 1077-1085.

DOI: 10.1016/j.jallcom.2019.01.257

Hearn, W., Bogno, A.-A., Spinelli, J., Valloton, J., Henein, H.

Microstructure Solidification Maps for Al-10 Wt Pct Si Alloys

(2019) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50 (3), pp. 1333-1345.

DOI: 10.1007/s11661-018-5093-2

Valloton, J., Bogno, A.-A., Henein, H.

Metastable dendrite morphologies in impulse atomized droplets of Al-alloys

(2019) MS and T 2019 - Materials Science and Technology 2019, pp. 1225-1227.

DOI: 10.7449/2019/MST_2019_1225_1227

Mohammadijoo, M., Collins, L., Henein, H., Ivey, D.G.

Canadian HSLA steel pipelines: History and technology developments

(2019) Materials Science and Technology 2018, MS and T 2018, pp. 1174-1181.

DOI: 10.7449/2018/MST-2018-1174-1181

Mohammadijoo, M., Valloton, J., Collins, L., Henein, H., Ivey, D.G.

Characterization of martensite-austenite constituents and micro-hardness in intercritical reheated and coarse-grained heat affected zones of API X70 HSLA steel

(2018) Materials Characterization, 142, pp. 321-331.

DOI: 10.1016/j.matchar.2018.05.057

Wiskel, J.B., Li, X., Ivey, D.G., Henein, H.

Characterization of X80 and X100 Microalloyed Pipeline Steel Using Quantitative X-ray Diffraction

(2018) Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 49 (4), pp. 1597-1611.

DOI: 10.1007/s11663-018-1298-4

Chatelier, C., Wiskel, J.B., Ivey, D.G., Henein, H.

The effect of skelp thickness on precipitate size and morphology for X70 microalloyed steel using rietveld refinement (Quantitative X-ray diffraction)

(2018) Crystals, 8 (7), art. no. 287.

DOI: 10.3390/cryst8070287

Bogno, A.-A., Valloton, J., Henein, H., Ivey, D.G., Locock, A.J., Gallerneault, M.

Effects of scandium on hypoeutectic aluminium copper microstructures under low solidification rate conditions

(2018) Canadian Metallurgical Quarterly, 57 (2), pp. 148-159.

DOI: 10.1080/00084433.2017.1403106

Valloton, J., Gawor, S., Henein, H.

Modelling of nucleation in Impulse atomized undercooled droplets

(2018) Computational Materials Science, 144, pp. 176-180.

DOI: 10.1016/j.commatsci.2017.12.004

Spinelli, J.E., Bogno, A.-A., Henein, H.

Two-Zone Microstructures in Al-18Si Alloy Powders

(2018) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49 (2), pp. 550-562.

DOI: 10.1007/s11661-017-4432-z

Mohammadijoo, M., Collins, L., Lazor, R., Henein, H., Ivey, D.G.

Influence of cold-wire submerged arc welding on the toughness of microalloyed steel

(2018) Welding Journal, 97 (12), pp. 338S-352S.

DOI: 10.29391/2018.97.029

Wiskel, J.B., Ma, J., Ivey, D.G., Henein, H.

Transverse strain aging behaviour of uncoated thick walled X70 UOE microalloyed steel pipes

(2018) Proceedings of the Biennial International Pipeline Conference, IPC, 3, .

DOI: 10.1115/IPC2018-78102

Spinelli, J.E., Hearn, W., Bogno, A.-A., Henein, H.

A general formulation of eutectic silicon morphology and processing history

(2018) Minerals, Metals and Materials Series, Part F4, pp. 381-387.

DOI: 10.1007/978-3-319-72284-9_51

Bogno, A.-A., Henein, H., Gallerneault, M.

Design and processing conditions of hypoeutectic Al–Cu–Sc alloys for maximum benefit of scandium

(2018) Minerals, Metals and Materials Series, Part F4, pp. 1609-1616.

DOI: 10.1007/978-3-319-72284-9_210

Gancarz, T., Jourdan, J., Gasior, W., Henein, H.

Physicochemical properties of Al, Al-Mg and Al-Mg-Zn alloys

(2018) Journal of Molecular Liquids, 249, pp. 470-476.

DOI: 10.1016/j.molliq.2017.11.061

Khodaie, N., Ivey, D.G., Henein, H.

Unit cell dilation technique for analyzing dilatometry data in microalloyed steels

(2018) Materials Characterization, 135, pp. 84-95.

DOI: 10.1016/j.matchar.2017.11.020

Valloton, J., Herlach, D.M., Henein, H., Sediako, D.

Microstructural Quantification of Rapidly Solidified Undercooled D2 Tool Steel

(2017) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 48 (10), pp. 4735-4743.

DOI: 10.1007/s11661-017-4249-9

Mohammadijoo, M., Collins, L., Henein, H., Ivey, D.G.

Evaluation of cold wire addition effect on heat input and productivity of tandem submerged arc welding for low-carbon microalloyed steels

(2017) International Journal of Advanced Manufacturing Technology, 92 (1-4), pp. 817-829.

DOI: 10.1007/s00170-017-0150-3

Herlach, D.M., Burggraf, S., Galenko, P., Gandin, C.-A., Garcia-Escorial, A., Henein, H., Karrasch, C., Mullis, A., Rettenmayr, M., Valloton, J.

Solidification of Undercooled Melts of Al-Based Alloys on Earth and in Space

(2017) JOM, 69 (8), pp. 1303-1310.

DOI: 10.1007/s11837-017-2402-y

Wiskel, J.B., Ma, J., Valloton, J., Ivey, D.G., Henein, H.

Strain aging on the yield strength to tensile strength ratio of UOE pipe

(2017) Materials Science and Technology (United Kingdom), 33 (11), pp. 1319-1332.

DOI: 10.1080/02670836.2017.1288776

Mohammadijoo, M., Kenny, S., Collins, L., Henein, H., Ivey, D.G.

Characterization of HAZ of API X70 Microalloyed Steel Welded by Cold-Wire Tandem Submerged Arc Welding

(2017) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 48 (5), pp. 2247-2259.

DOI: 10.1007/s11661-017-4041-x

Mohammadijoo, M., Kenny, S., Collins, L., Henein, H., Ivey, D.G.

Influence of cold-wire tandem submerged arc welding parameters on weld geometry and microhardness of microalloyed pipeline steels

(2017) International Journal of Advanced Manufacturing Technology, 88 (5-8), pp. 2249-2263.

DOI: 10.1007/s00170-016-8910-z

Delshad Khatibi, P., Henein, H.

Estimation of droplet solidification temperature in rapid solidification using in-situ measurements

(2017) Canadian Metallurgical Quarterly, 56 (1), pp. 76-84.

DOI: 10.1080/00084433.2016.1259711

Bogno, A.-A., Valloton, J., Henein, H., Gallerneault, M., Herlach, D.

Effect of hypoeutectic Sc additions to Al-4.5 wt% Cu under different cooling rates

(2017) Minerals, Metals and Materials Series, (9783319521312), pp. 355-363.

DOI: 10.1007/978-3-319-52132-9_36

Sander, S., Tischler, C., Achelis, L., Henein, H., Fritsching, U.

Production of polymer microparticles by electrospray atomization

(2017) Atomization and Sprays, 27 (5), pp. 457-464.

DOI: 10.1615/AtomizSpr.2017019439

Champdoizeau, Q., Henein, H.

The measurement of density, surface tension, and viscosity of metallic liquids by the Discharge Crucible method,

(2022) Metallurgy in Space: Recent results from ISS, Fecht, H.J. and Mohr, M., Editors, Springer-Nature, in press.

DOI:

Apelian, D., Henein, H., Fritsching, U.

Introduction

(2017) Metal Sprays and Spray Deposition, Henein, H., Uhlenwinkel, V., Fritsching, U., Editors, Springer-Nature, pp. 1-7.

DOI: 10.1007/978-3-319-52689-8_1

Bogno, A.-A., Henein, H., Uhlenwinkel, V., Gartner, E.

Chapter 2: Single fluid atomization fundamentals

(2017) Metal Sprays and Spray Deposition, Henein, H., Uhlenwinkel, V., Fritsching, U., Editors, Springer-Nature, pp. 9-48.

DOI: 10.1007/978-3-319-52689-8_2

Khatibi, P.D., Henein, H., Fritsching, U.

Chapter 6: In-situ, real time diagnostics in the spray forming process

(2017) Metal Sprays and Spray Deposition, Henein, H., Uhlenwinkel, V., Fritsching, U., Editors, Springer-Nature, pp. 221-263.

DOI: 10.1007/978-3-319-52689-8_6

Zepon, G., Ellendt, N., Uhlenwinkel, V., Henein, H.

Chapter 8: Processing aspects in spray forming

(2017) Metal Sprays and Spray Deposition, Henein, H., Uhlenwinkel, V., Fritsching, U., Editors, Springer-Nature, pp. 297-348.

DOI: 10.1007/978-3-319-52689-8_8