MFJ 948 DELUXE VERSA TUNER
The MFJ-948 Versa Tuner II is a versatile antenna tuner designed for amateur radio enthusiasts. It can handle up to 300 watts of RF output power and operates across a wide frequency range from 1.8 to 30 MHz. This tuner is equipped with a "T" matching network, allowing it to match various antennas, including dipoles, verticals, inverted-vees, and random wires. It also features a built-in 4:1 balun for balanced feedlines and an illuminated cross-needle meter to measure SWR, forward, and reflected power
MFJ 264
The MFJ-264 is a dry dummy load designed for amateur radio enthusiasts. It is highly versatile, capable of handling up to 1.5 kW of power for short durations (10 seconds) and 100 watts for extended periods (10 minutes). It operates across a frequency range of 1 to 650 MHz, with a low SWR of less than 1.3:1 up to 650 MHz, making it suitable for a wide variety of radios and applications.
MFJ 841
The MFJ-841 is an HT SWR/Wattmeter designed for 144MHz operation. It connects directly in line between your HT and antenna, allowing you to read SWR up to 6:1 and measure power output up to 5 watts. It features a three-position switch to select SWR, SWR set, or forward power
RIG EXPERT SD SOUNDCARD
The RigExpert SD is a ham radio sound card interface designed for digital mode operation, voice recording, and playback. It replaces the need for a separate sound card and works with popular ham radio software for logging, contesting, and digital modes. DB 25 connector and cable available, this is the original REX soundcard with CW paddle connector.
ICOM IC 707
The ICOM IC-707 is a basic HF transceiver designed for amateur radio operators. It offers 5-100W output and covers all ham bands. While it lacks advanced features found in newer models, it is praised for its simplicity and reliability. Some users appreciate its strong performance in portable operations, such as Parks on the Air (POTA)
YAESU FT 7100
The Yaesu FT-7100 is a dual-band VHF/UHF FM transceiver with 50W output on 144 MHz and 35W on 430 MHz. It features dual receive capability, 262 memory channels, and built-in CTCSS/DCS encoding/decoding
MFJ DELUXE VERSA TUNER II
The MFJ-949E Deluxe Versa Tuner II is a manual antenna tuner designed for 160-10 meters with a 300-watt power rating. It features a built-in 4:1 balun, allowing for coaxial, single-wire, or balanced feedlines. The cross-needle meter provides peak or average forward and reflected power readings, and it includes an internal dummy load
AEA ECONO TUNER
The AEA ET-1 Econo-Tuner is an affordable antenna tuner designed for economy-minded operators. It helps optimize antenna performance by providing adjustable impedance matching and SWR measurements.
ANTENNA SWITCHES
DAIWA VHF SWR METER
The Daiwa CN-465M is a cross-needle SWR and power meter designed for VHF operation. It covers a frequency range of 140 MHz to 450 MHz and offers two power ranges: 15 watts and 75 watts. The meter features a 12V DC illuminated display, making it easy to read in various lighting conditions
ASCOM VHF TEST METER
The Ascom VHF Test Meter is primarily used for measuring VSWR (Voltage Standing Wave Ratio) and power output in VHF radio setups. It features multiple settings, including Power 25W, Power 50W, VSWR Calibrate, VSWR Operate, and VSWR Field Strength, along with an adjustment knob
TEN TEC TITAN 425 AMPLIFIER
The Ten-Tec Titan 425 is a high-performance HF amplifier known for its full QSK operation, pair of 3CX800A7 tubes, and 1500W output. It’s a solid choice for contesting and DXing, offering smooth operation with minimal relay noise.
Some key features:
Full QSK for seamless CW operation.
Quiet blower for cooling efficiency.
Remote power supply for better desk space management.
Easy tuning with 35W input yielding 1kW output
PALOMAR ELITE 500 POWER SUPPLY
The Palomar Elite 500 is a base station amplifier with a built-in regulated power supply, allowing it to power both the amplifier and a connected radio. It typically provides 35 amps and operates on AM and SSB.
Some key features:
Built-in power supply (no need for an external unit).
Selectable power levels (Hi, Med, Low).
Preamp functionality for signal boosting.
Quiet cooling fan (often replaced in older units).
Reset button required after powering on.