Maintain Adequate Tyre Inflation Pressure:

Appropriate inflation pressure is required for optimal tyre efficiency, safety, and fuel economy. Remember to check your tyres (while they are cold) with a reliable tyre pressure gauge on a regular basis (a minimum of once a month). For best results, you can Buy Tyres in Solihull. 

Maintain The Correct Level Of Inflation Pressure:

The most important thing you can do to help your tyres last longer and stay strong is to maintain proper inflation pressure.

The most prevalent cause of irreversible tyre degradation is underinflation, which causes significant cracking and subsequent air loss. 

Overinflation produces stiffness, which can make driving unpleasant and cause unwanted vehicle vibration. It also increases the risk of impact injury.

Avoid excessive tyre spinning:

To liberate your vehicle, use a gently forward and backwards rocking motion. Never stand close or behind a tyre spinning at extremely fast speeds, such as when trying to accelerate a stalled vehicle or using an on-car spin balance machine.

Examine your tyres for wear:

Always withdraw tyres from service when the tread depth reaches 1.6mm. When they wear to 1.6mm, all new wheels have tread wear indicators which appear as smooth banks within the tread grooves. Skidding on bare or very bald tyres might cause a wet weather mishap. Overly worn tyres are additionally more susceptible to punctures.

Examine your tyres for damage:

Monitoring your vehicle's tyres for indicators of damage and overall condition on a regular basis (minimum of once a month) is critical for safety. If you're experiencing any concerns, have your tyres inspected by a tyre dealer. 

Tyre maintenance:

Please keep in mind that companies do not guarantee the examination or repair process. The repair is completely the repairer's duty and should be carried out in compliance with approved Rubber Manufacturers Association (RMA) procedures.

Alert From The Tyre Pressure Monitoring System:

More advice on what should be done if the tyre pressure warning system triggers can be found in your vehicle's Owner's Manual.

Don't Try Mounting Your Own Tyres:

An explosion of the tyre/rim assembly caused by faulty mounting practices might cause serious injury. Tyres should only be mounted by professionally skilled individuals.

On The Same Axle, Do Not Mix Tyres Of Different Sizes And Types:

Goodyear suggests fitting four tyres of the same kind and size as recommended by the vehicle maker for the optimum handling and control.

Warning:

Always reference the owner's handbook and the vehicle manufacturer's replacement tyre guidelines before replacing your tyres. A modification in tyre size or kind can have a substantial impact on vehicle handling. When replacing tyres that are not the original equipment size, consult with a professional installer to ensure correct clearance, load-carrying ability, and inflation pressure are chosen. Never surpass the highest load capacity and pressure listed on the tyre's sidewall. 

When replacing tyres, keep the external diameter and load-carrying capabilities of the original equipment tyre in mind. To avoid overloading the tyre, the level of inflation might have to be adjusted. 

Never install tyres that have a lower load-carrying capacity than the vehicle's original equipment manufacturer requires.

You must ensure that the load-carrying capacity of the new tyres is equivalent to or greater than that specified by the original equipment manufacturer.

CAUTION: Never use "Standard Load" (SL) tyres in place of "Extra Load" (XL) tyres. If the vehicle came with "Extra Load" (XL) tyres, replace them with the same size XL tyres.

Do not overburden your vehicle:

Consult your vehicle's owner's manual to learn about load restrictions. Overloading your vehicle puts unnecessary strain on its tyres and other key components. This can also lead to poor handling, increased fuel consumption, and tyre damage. Never install new tyres with less load capacity than indicated on the vehicle tyre label, and remember that optimum rim width is vital for proper tyre load distribution and function.

Maintain the suspension and wheel alignment of your car, as well as the balance and rotation of your tyres.

Vibration or uneven tyre wear can be caused by a lack of rotation, worn suspension elements, under-inflation, over-inflation, wheel asymmetry, and misalignment. Rotate your Bridgestone Tyres in Shirley at least every 6,000 miles/10,000 kilometres or as recommended by the manufacturer of your vehicle.