Embedded Files
Installation Instruction
Installation Instruction
For bed rail, king size or queen size.
Check out the product https://www.amazon.com/dp/B07VDWY4XW
Having questions? Click “Ask a question” to contact seller.
Here is a pdf version of this instruction
Check the size of the bed rails you receive. The length of the rail is labeled outside the box and the rail cover as: 1.5 m, 1.8 m, 2 m, or 2.1 m.
Queen size bed: 80’’(2 m) X 2 and 60’’(1.5m) X 1.
King size bed: 80’’(2 m) X 2 and 76’’(1.9m) X 1.
California King size bed: 84’’(2 m) X 2 and 72’’(1.8m) X 1.
2. Assemble the three rails. Here are the steps for the 2 m rail:
a. Align the tubes. The tubes with foam cover are on the top.
b: Connect the tubes.
c: Insert the tubes into the rail cover.
d: Connect the tubes to the rail side bar.
e: Zip the rail cover to the rail side bar.
f: Install the rail base. Choose the suitable height based on the thickness of mattress.
3. Install the rails to bed. Here are the steps for a queen bed. Following similar steps for other bed types.
a. Put the 1.5 m rail on the short side of bed.
b. Screw the base into the wood using at least three screws
c. Install the other two rails. Secure the rail bases into the bed.
d. Connect the rail corner using the plastic cover or the metal L. The metal L is strongly recommended.
Having questions? Click “Ask a question” to contact seller.
Warning:
1. The product should be used with adult supervision.
2. Only for children who no longer use a crib. Do not use this bed rail instead of a crib.
3. Do not use on baby cots, bunk beds, water beds and beds with air mattresses.
4. Stop using the product if there are missing parts or in wrong length.
5. When the accessory is damaged or missing, stop using this product.
6. After installation, there should be no gap between rail and the side of mattress. Mind the gap as children may get stuck.
Page updated
Google Sites
Report abuse