論文發表
(A) Journal papers
2023
Lin, Y. T., Tung, Y. T., Wong, J. Y., and Wang, G. J.*, Fabrication of perfusable microvessel networks by mimicking in vivo vasculogenesis using a novel scaffold-wrapping method, Materials and Design, 227, 111707, 2023. (IF=9.417)
Chung, P. M., Lin, Y. T., and Wang, G. J.*, Au/Ni coaxial nanopillar microarray electrodes for red blood cell concentration detection, IEEE Sensors Journal, 23(5), 4694-4699, 2023. (IF=4.325)
2022
Thao, D. H. V., Weng, W. T., Hieu, N. V., Chang, C. C.**, and Wang, G. J.*, A flexible and stretchable photonic crystal film with sensitive structural color-changing properties for spoiled milk detection, Food Chemistry-x, 16, 100526, 2022. (IF=6.443)
Sahoo, R.S., Hsu, S. H. J., Chou, D. A., Wang, G. J.*, Chang, C. C.*, Surface plasmon-enhanced fluorescence and surface-enhanced Raman scattering dual-readout chip constructed with silver nanowires: Label-free clinical detection of direct-bilirubin, Biosensors and Bioelectronics, 213, 114440, 2022. (IF=12.545)
Wang, W. J., Chou, M. C., Lee, Y. J., Hsu, W. L.**, and Wang, G. J.*, A simple electrochemical immunosensor based on a gold nanoparticle monolayer electrode for neutrophil gelatinase-associated lipocalin detection, Talanta, 246, 123530, 2022. (IF=6.556)
Chou, C. C., Lin, Y. T., Kuznetsova, I., and Wang, G. J.*, Genetically modified soybean detection using a biosensor electrode with a self-assembled monolayer of gold nanoparticles, Biosensors, 12, 207, 2022. (IF=5.743)
Wang, B. Y., Gu, B. C., Wang, G. J., Yang, Y. H., and Wu, C. C*., Detection of amyloid-β(1-42) aggregation with a nanostructured electrochemical sandwich immunoassay biosensor, Frontiers in bioengineering and biotechnology, 10, 853947, 2022. (IF=6.064)
Lin, W. P., Wang, W. J., Lee, C. H., Jan, F. J. **, and Wang, G. J.*, A two-in-one immunoassay biosensor for the simultaneous detection of Odontoglossum ringspot virus and Cymbidium mosaic virus, Sensors and Actuators B: Chemical, 350, 130875, 2022. (IF=9.221)
2021
Lin, F. Y., Lee, P. Y., Chu, T. F., Peng, C. Y., and Wang, G. J.*, Neutral nonenzymatic glucose biosensors based on electrochemically deposited Pt/Au nanoalloy electrodes, International Journal of Nanomedicine, 16, 5551-5563, 2021. (IF=7.033)
Li, C. Y., Hsu, S. H. J., Chang, C. C.**, and Wang, G. J.*, Direct bilirubin detection using surface-enhanced raman spectroscopy, IEEE Sensors Journal, 21, 21458-21464, 2021. (IF=4.325)
Chen, L. D., Wang, W. J., and Wang, G. J.*, Electrochemical detection of electrolytes using a solid-state ion-selective electrode of single-piece type membrane, Biosensors, 11, 109, 2021. (IF=5.743)
Chu, T. F., Lin, F. Y, Kuznetsova, I., and Wang, G. J.*, A novel neutral non-enzymatic glucose biofuel cell based on a Pt/Au nano-alloy anode, Journal of Power Sources, 486, 229374, 2021. (IF=9.794) 台-俄國際合作
2020
Liu, Z. J., Lin, S. C., Lee, P. Y., Lin, Y. T., Lai, Z. L., Chang, C. C.**, and Wang, G. J.*, Dual-acting antibacterial porous chitosan film embedded with a photosensitizer, Science and Technology of Advanced Materials, 21(1), 562-572, 2020. (IF=7.821)
Chu, T. F., Rajendran, R., Kuznetsova, I., and Wang, G. J.*, High-power, non-enzymatic glucose biofuel cell based on a nano/micro hybrid-structured Au anode, Journal of Power Sources, 453, 227844, 2020. (IF=9.794) 台-俄國際合作
Alvarez-Elizondo, M. B., Li, C. W., Marom, A., Tung, Y. T., Drillich, G., Horesh, Y., Lin, S. C., Wang, G. J.*, Weihs, D.*, Micropatterned topographies reveal measurable differences between cancer and benign cells, Medical Engineering & Physics, 75, 5-12, 2020. (IF=2.356) 台-以國際合作
Wang, W. J., Lee, C. H., Li, C. W., Liao, S., Jan, F. J.**, and Wang, G. J.*, Orchid virus detection from orchid leaves using micro/nano hybrid-structured immuno-electrochemical biosensor, J. Electrochemical Society, 167, 027530, 2020, (IF=4.386) 產學合作
Kuznetsova, I. E., Smirnov, A. V., Plekhanov, Yu. V., Reshetilov, A. N. and Wang, G. J., Effect of the aperture of an interdigital transducer on the characteristics of its output signal in a piezoelectric plate, Bulletin of the Russian Academy of Sciences: Physics, 84 (6), 644–647, 2020. (IF=0.463)台-俄國際合作
2019
Lin, Y. T., Chen, S. T., Chang, J. C., Toeh, R. J., Liu, C. S.**, Wang, G. J.*, Green extraction of healthy and chemical free mitochondria with a conventional centrifuge, Lab on a Chip, 19, 3862-3869, 2019. (IF=7.519)
Su, C. H., Chen, J. W., Chen, L. D., Chang, J. C., Liu, C. S., Chang, C. C.*, and Wang, G. J.*, Organic Small Molecule for Detection and Photodegradation of Mitochondrial DNA Mutations, Journal of Materials Chemistry B, 39 (7), 5947-5955, 2019. (IF=7.571)
Tung, Y. T., Liang, J. J., Feng, H. T., Jhang, R. N., Hsieh, S. L., Lin, Y. L.*, Wang, G. J.*, Investigation of the extremely weak interaction between the Japanese Encephalitis virus and CLEC5A using a multivalent-interaction-enhancement sensing electrode, Biosensors and Bioelectronics: x, 2, 100024, 2019. (IF=12.545)
Plekhanova, V., Tikhonenko, S. A., Dubrovsky, A., Kim, A., Musin, E., Wang, G. J., Kuznetsova, I., Kolesov, V., Reshetilov, A., Comparative study of the electrochemical sensors based on enzyme immobilized into polyelectrolyte microcapsules and into chitozan gel, Analytical Science, 35 (9), 1037-1043, 2019. (IF=1.967) 台-俄國際合作
Lin, Y. C., Liao, S., Huang, T., and Wang, G. J.*, A novel biosensor electrode with self-assembled monolayer of gold nanoparticle on a micro hemisphere array, J. Electrochemical Society, 166 (6) B349-B354, 2019, (IF=4.386)
Reshetilov, A., Plekhanova, Y., Tarasov, S., Tikhonenko, S., Dubrovsky, A., Kim, A., Kashin, V., Machulin, A., Wang, G. J., Kolesov, V., Kuznetsova, I., Bioelectrochemical properties of enzyme-containing multilayered polyelectrolyte microcapsules modified with multiwalled carbon nanotubes, Membranes, 9 (4), 53, 2019. (IF=4.562) 台-俄國際合作
2018
Hsiao, Y. H., Li, C. H., Chang, J. C, Liu, C. S.*, Wang, G. J.*, Chemical-free extraction of functional mitochondria using a microfluidic device, Inventions, 3, 68 (11 pages), 2018.
Jian, Y. S., Lee, C. H., Jan, F. J**, and Wang, G. J.*, Detection of odontoglossum ringspot virus infected phalaenopsis using a nano-structured biosensor, J. Electrochemical Society, 165 (9) H449-H454, 2018, (IF=4.386)
Wu, C. T. and Wang, G. J., Design and manufacture of high-filling-efficiency microfluidic devices, International Journal of Advanced Manufacturing Technology, 97, 5–8, pp 1711–1717, 2018. (IF=3.563)
Peng, C. Y., Hsu, C. W., Li, C. W., Wang, P. L., Jeng, C. C., Chang, C. C.**, Wang, G. J.*, A flexible photonic crystal material for multiple anti-counterfeiting applications, ACS Applied Materials & Interfaces, 10 (11), 9858–9864, 2018. (IF=10.383)
Tseng, Y. T., Li, C. W., and Wang, G. J.*, Template-assisted fabrication of tunable aspect ratio, biocompatible iron oxide pillar arrays, Advanced Materials Letter, 9(4), 249-257, 2018.
2017
Cai, S. J., Li, C. W., Weihs, D., and Wang, G. J.*, Control of cell proliferation by a porous chitosan scaffold with multiple releasing capabilities, Science and Technology of Advanced Materials, 18(1), 987-996, 2017. (IF=7.821)
Yeh, B. Y., Jian, B. S., Wang, G. J., and Tseng, W. J., CuO/V2O5 hybrid nanowires for highly sensitive and selective H2S gas sensor, RSC Adv., 7, 49605, 2017. (IF=3.361)
Peng, C. Y., Hsu, C. W., Li, C. W., Wang, G. J.*, Using anodic aluminum oxide film and nanoimprint to produce polymer anti-counterfeit labels, Smart Science, 5(3), 117-122, 2017.
Shen, M. C., Lai, J. C., Hong, C. Y., and Wang, G. J.*, Electrochemical aptasensor for detecting Der p2 allergen using polycarbonate-based double-generation gold nanoparticle chip, Sensing and Bio-Sensing Research, 13, 75-80, 2017.
Tung, Y. T., Chang, C. C., Ju, J. C.*, and Wang, G. J.*, Fabrication of a reticular poly(lactide-co-glycolide) cylindrical scaffold for the in vitro development of microvascular networks, Science and Technology of Advanced Materials, 18(1), 163-171, 2017. (IF=7.821)
Peng, S. W., Li, C. W., Chiu, I. M., and Wang, G. J.*, Nerve guidance conduit with a hybrid structure of a PLGA microfibrous bundle wrapped in a micro/nanostructured membrane, Inter. J. Nanomedicine, 12, 421-432, 2017. (IF=7.033)
2016
Li, C. W., Pan, W. T., Ju, J. C., Wang, G. J.*, An endothelial cell conditioned medium embedded in porous PLGA scaffold for the enhancement of mouse embryonic stem cell differentiation, Biomedical Materials, 11, 025015, 2016. (IF=4.103)
Ciudad, P, Dower, R , Nicoli, F , Orfaniotis, G, Maruccia, M , Constantinescu, T , Lin, S. P., Wang, G. J.*, Chen, H. C., Pelvic-perineal reconstruction with the combined transverse upper gracilis and profunda artery perforator (TUG-PAP) flap, Journal of Plastic Reconstructive and Aesthetic Surgery, 69(4), 573-575, 2016. (IF=3.022)
Hsu, C. W., Su, F. C., Peng, P. Y., Young, H. T., Liao, S., and Wang, G. J.*, Highly sensitive non-enzymatic electrochemical glucose biosensor using a photolithography fabricated micro/nano hybrid structured electrode, Sensors and Actuators B, 230, 559-565, 2016. (IF=9.221)
Lin, Y. T., Li, C. W., and Wang, G. J.*, The nano/micro hybrid structures enhancing B35 cell guidance on chitosan, ASME Journal of Nanotechnology in Engineering and Medicine, 6, 030702, 2016.
Chang, C. Y., Sasaki, M., Kumagai, S., and Wang, G. J.*, Design of microplasma electrodes for plasma-on-chip devices, Journal of Physics D, Applied Physics, 49, 155203, 2016. (IF=3.409)
Chen, C. C., Lai, Z. L., Wang, G. J.*,, and Wu, C. Y.**, Polymerase chain reaction-free detection of hepatitis B virus DNA using a nanostructured impedance biosensor, Biosensors & Bioelectronics, 77, 603-608, 2016. (IF=12.545)
Tung, Y. T., Chang, C. C.*, Y. L. Lin, Hsieh, S. L., and Wang, G. J.*, Development of double-generation gold nanoparticle chip-based dengue virus detection system combining fluorescence turn-on probes, Biosensors & Bioelectronics, 77, 90-98, 2016. (IF=12.545)
Before 2016
Lee, B. Y., Li, C. W. and Wang, G. J.*, Nanoporous anodic aluminum oxide tube encapsulating a microporous chitosan/collagen composite for long-acting drug release, Biomedical Physics & Engineering Express, 1, 045004, 2015.
Hsu, C. W., Feng, W. C., Su, F. C., and Wang, G. J.*, A novel electrochemical glucose biosensor with a silicon nanowire array electrode, J. Electrochemical Society, 162(10), B1-B5, 2015.
Hsieh, Y. D., Lee, M. Y., and Wang, G. J.*, Sb2S3 quantum-dot sensitized solar cells with silicon nanowire photoelectrode, Inter. J. of Photoenergy, Vol. 2015, Article ID 213858, 2015.
Liao, E. C, Chang, C. Y., Wu, C. C., Wang, G. J., Tsai, J. W., Association of single nucleotide polymorphisms in the MD-2 gene promoter region with Der p 2 allergy, Allergy Asthma Immunol Res. 7(3), 249-255, 2015.
Liu, H. C. and Wang, G. J.*, Superior antireflection coating for a silicon cell with a micro-nano hybrid structure, Inter. J. of Photoenergy, Vol. 2014, 807812, 2014.
Tung, Y. T., Wu, M. F., Wang, G. J.*, and Hsieh, S. L**, Nanostructured electrochemical biosensor for the detection of the weak binding between the Dengue Virus and the CLEC5A receptor, Nanomedicine: NBM, 10, 1335-1341, 2014.
Hsu, C. W., Li, C. W. and Wang, G. J.*, Fabrication of biocompatible high aspect ratio Au-Ni coaxial nanorod arrays using the electroless Galvanic displacement reaction method, RSC advances, 4, 12127-12132, 2014.
Hsu, C. W. and Wang, G. J.*, Highly sensitive glucose biosensor based on Au-Ni coaxial nanorod array having high aspect ratio, Biosensors & Bioelectronics, 56, 204-209, 2014.
Wu, J. Y., Li,C. W., Tsai, C. H., Chou, C. W., Chen, D. R., and Wang, G. J.*, Synthesis of antibacterial TiO2/PLGA composite biofilms, Nanomedicine: NBM, 10, 1097-1107, 2014.
Chin, Y. T., Liao, E. C., Wu, C. C., Wang, G. J.*, and Tsai, J. J.*, Detection of the haplotype mutations of the MD-2 gene promoter associated with Der p2-induced allergy using a nanostructured biosensor, Inter. J. Nanomedicine, 9, 403-412, 2014.
Wu, C. C.*, Ku, B. C., Ko, C. H., Chiu, C. C., Wang, G. J., Yang, Y. H., Wu, S. J., Electrochemical impedance spectroscopy analysis of A-beta (1-42) peptide using a nanostructured biochip, Electrochimica Acta, 134, 249-257, 2014.
Liu, H. C. and Wang, G. J.*, Fabrication of high anti-reflection nanowires on silicon using two-stage metal-assisted etching, Journal of Renewable and Sustainable Energy, 5, 053115. (2013).
Li, C. W. and Wang, G. J.*, A material-independent cell–environment niche based on micro-reciprocating motion for cell growth enhancement, Biofabrication, 5, 045001. (2013).
Chung, I. C., Li, C. W., and Wang, G. J.*, The influence of different nanostructured scaffolds on fibroblast growth, Science and Technology of Advanced Materials, 14, 044401. (2013).
Chin, Y. T., Liao, E. C., Wu, C. C., Wang, G. J.*, and Tsai, J. J.*, Label-free detection of single-nucleotide polymorphisms associated with myeloid differentiation-2 using a nanostructured biosensor, Biosensors & Bioelectronics, 49, 506-511. (2013).
Wang, H. W., Cheng, C. W., Li, C. W., Wu, P. H., and Wang, G. J.*, Hollow three-dimensional endothelialized microvessel networks based on femtosecond laser ablation, Biomedical Microdevices, 15, 879-885. (2013).
Liu, H. C., Tsai, C. C. and Wang, G. J.*, Glucose biosensors based on a gold nanodendrite modified screen-printed electrode, Nanotechnology, 24, 215101. (2013).
Tsai, J. J., Liu, Y. F., Liao, E. C., Chen, J. L, and Wang, G. J.*, Reduction of incubation time and enhancement of analyte adhesion uniformity of impedance biosensors using microvibration method, Sensors & Actuators B: Chemical, 178, 404-411. (2013)
Chou, C. W.*, Hsieh, H. H., Chen, K. S., Hong-Ru Lin, H. R., Wang, G. J., Chang, H. C., Pan, Y. L., Wei, Y. S., Chang, K. S., and Harn, Y. W., Biopolymer coated gold nanocrystals prepared using the green chemistry approach and their shape-dependent catalytic and surface-enhanced Raman scattering properties, Physical Chemistry Chemical Physics, 15, 11275-11286. (2013).
Lin, Y. W. and Wang, G. J.*, Dielectrophoresis measurement of bovine endothelial cells adhesion on different materials, Microsystem Technologies, 19, 945-955. (2013)
Tsai, Y. T., Chang, K. J., and Wang, G. J.*, Measurement and control of the ion diffusion coefficient in a nanochannel, Microsystem Technologies, 19, 937-944. (2013)
Tsai, C. C. and Wang, G. J.*, A glucose biosensor based on a 3D nanostructured gold electrode, J. Electrochemical Society, 160(1), B1-B5. (2013)
Liu, Y. F., Tsai, J. J., Chin, Y. T., Liao, E. C., Wu, C. C., Wang, G. J.*, Detection of allergies using a silver nanoparticle modified nanostructured biosensor, Sensors & Actuators B: Chemical, 171-172, 1095-1100. (2012) (SCI, IF=5.667, 2/61)
Wang, H. W., Cheng, C. W., Li, C. W., Chang, H. W., Wu, P. H., Wang, G. J.*, Fabrication of pillared PLGA microvessel scaffold using femtosecond laser ablation, Inter. J. Nanomedicine, 7, 1865-1873. (2012)
Chen, Y. S., Wu, C. C., Tsai, J. J., and Wang, G. J.*, An electrochemical impedimetric biosensor based on a nanostructured polycarbonate (PC) substrate, Inter. J. Nanomedicine, 7, 133-140 (2012)
Ho, J. Y. and Wang, G. J.*, Fabrication of high aspect ratio nanoporous array on silicon, Microsystem Technologies, 18, 1849-1856. (2012)
Tsai, J. J., Bau, I. J., Chen, H. T., Lin, Y. T., and Wang, G. J.*, A novel nanostructured biosensor for the detection of the dust mite antigen Der p2, Inter. J. Nanomedicine, 6, 1201-1208. (2011)
Chang, C. Y. and Wang, G. J.*, Anodic Aluminum Oxide Diodes, Japanese Journal of Applied Physics, 50(7), 075201 (4 pages) (2011)
Tubtimtae, A., Lee, M. W.*, and Wang, G. J., Ag2Se quantum-dot sensitized solar cells for full solar spectrum light harvesting, Journal of Power Sources, 196, 6603-6608. (2011)
Lin, Y. H., Chang, K. J., and Wang, G. J.*, A Novel Chip-on-Glass method for Slim LCD Packaging, Microsystem Technologies, 17, 685-691. (2011)
Wang, G. J.*, Lee, M. W., Chen, W. Z., Chen, Y. H., Chien, M. C., Yu, M. C., A Metal-Solution Field-Effect-Transistor Enhanced Proton-Motive-Force Driving Photovoltaic, IEEE Trans. on Nanotechnology, 10, 191-196. Cover page (2011)
Wang, C. G. and Wang, G. J.*, A MOSFET-like infrared sensor for the enhancement of photoconductivity and photoresponsivity, Current Nanoscience, 6(6), 648-653. (2010)
Wang, G. J.*, Lin, Y. C., and Hsu, S. h., The Fabrication of PLGA Microvessel Scaffolds with Nano-Patterned Inner Walls, Biomedical Microdevices, 12, 841-848. (2010). Wang, G. J.* and Chou, S. W., Electrophoretic deposition of uniformly distributed TiO2 nanoparticles using an anodic aluminum oxide template for efficient photolysis, Nanotechnology, 21, 115206, (2010)
Hsu, C. W., Chou, Z. D., and Wang, G. J.*, Fabrication of High Aspect Ratio Alumina-Nickel Coaxial Nanorod Array by Electrodeposition, ASME/IEEE J. of Microelectromechnaical System, 19(4), 849-853 (2010)..
Chen, Y. C., Chen, G. Y., Lin, Y. C., and Wang, G. J.*, A Lab-on-a-Chip Capillary Network for Red Blood Cell Hydrodynamics, Microfluidics and Nnaofluidics, 9, 585-591. (2010).
Chen, G. Y., Lee, M. W., and Wang, G. J.*, Fabrication of Dye- Sensitized Solar Cells with A 3D Nanostructured Electrode, Inter. J. of Photoenergy, 2010, Article ID 585621, 7 pages, DOI:10.1155/2010/585621, (2010)
Lai, M. H., Tubtimtae, A., Lee, M. W.*, Wang, G. J., ZnO-Nanorod Dye-Sensitized Solar Cells: New Structure without a Transparent Conducting Oxide Layer, Inter. J. of Photoenergy, 2010, Article ID 497095, 5 pages, , (2010)
Tubtimtae, A., Wu, K. L., Tung, H. Y., Lee, M. W.*, Wang, G. J., Ag2S quantum dot-sensitized solar cells, Electrochemistry Communications, 12, 1158-1160 (2010)
Wang, G. J.*, Lin, Y. C., Lee, J. W,, Hsueh, C. C., Hsu, S. h, Hung, H. S., Fabrication of Orderly Nanostructured PLGA Scaffolds Using Anodic Aluminum Oxide Templates, Biomedical Microdevices, 11, 843-850. (2009)
Chen, H. T. and Wang, G. J.*, Fabrication of 3D Nano-structured ITO Films by RF Magnetron Sputtering, Current Nanoscience, 5(3), 297-301. (2009)
Wang, G. J.*, Lee, M. W., Chen, Y. H., A TiO2/CNT coaxial structure and standing CNT array laminated photocatalyst to enhance the photolysis efficiency of TiO2, Photochemistry and Photobiology, 84, 1493-1499. (2008)
Chien, M. C., Wang, G. J.*, Yu. M. C., Nanopore Size Estimation Using Electrochemical Impedance Spectroscopy Analysis, Japanese Journal of Applied Physics, 47(9), 7459-7463. (2008)
Wang, G. J.*, Chen, H. T., Yang, H., Fabrication of crystalline indium tin oxide nanobaskets electrode using AAO template, Japanese Journal of Applied Physics, 47(7), 5727-5729. (2008)
Wang, G. J.*, Ho, K. H., Hsueh, C. C., Biodegradable polylactic acid (PLA) microstructures for scaffold applications, Microsystem Technologies, 14, 989-993. (2008)
Wang, G. J.*, Chen, W. Z., Chang, K., A two-step etching method to fabricate nanopores in silicon, Microsystem Technologies, 14, 925-927. (2008)
Wang, G. J.*, Hsueh, C. C., Hsu, S. H., Hung, H. S., “Fabrication of PLGA Microvessel Scaffolds with Circular Microchannels Using Soft Lithography,” Journal of Micromechanics and Microengineering, Vol. 17, pp. 2000-2005. (2007)
Chien, M. C., Wang, G. J.*, Yu. W. C., “Modeling Ion Diffusion Current in a Nanochannel Using Infinitesimal Distribution RC Circuits,” Japanese Journal of Applied Physics, Vol. 46, No. 11, pp. 7436-7440. (2007)
Wang, G. J.*, Ho, K. H., Hsu, S. H., Wang, K. P., “Microvessel Scaffold with Circular Microchannels by Photoresist Melting,” Biomedical Microdevices, Vol. 9, pp. 657-663. (2007)
Wang, G. J.*, Lin, Y. C., Lin, G. S., “Ultra Fine Pitch Flat Panel Display Packaging Using 3mm Conductive Particles,” Microsystem Technologies, Vol. 13, No. 11-12. pp. 1471-1476. (2007)
Fan, J. Y., Chien, M. C, Wang, G. J.*, “Experimental Investigation on the Bi-directional Growing Mechanism of the Foils Laminate Approach in AAO Fabrication,” Nanoscale Research Letters, Vol. 2, No. 1, pp. 49-53. (2007)
Wang, G. J.*, Lin, Y. C., Lin, G. S., “A Novel Contact Resistance Model of Anisotropic Conductive Film for FPD Packaging,” Microsystem Technologies, Vol. 13, No. 11-12. pp. 1477-1482. (2007)
Wang, G. J.*, Lin, B. S. and Chang, K., “In-Situ Neural Network Process Controller for Copper Chemical Mechanical Polishing,” International Journal of Advanced Manufacturing Technology, Vol. 32, pp. 42-54. (2007)
Wang, G. J.*, Chang, J. H., and Yang H., “Triplex-Pumping CD-Like Microfluidic Platform with Parabolic Microchannels,” Microsystem Technologies, Vol. 12, No. 10-11. pp. 899-905. (2006)
Yu, W. C. and Wang, G. J.*, “Discrete Sliding Mode Controller Design Based on the LQR Suboptimal Approach with Application on AC Servo Motor,” Journal of Chinese Institute of Engineers, Vol. 29, No 5, pp. 873-882. (2006)
Wang, G. J.* and Hsu, W. H., “PET Laminated Thin-Film Capillary Electrophoresis Chips by Sandwiching Method,” International Journal of Advanced Manufacturing Technology, Vol. 30, No 1-2, pp. 87-91. (2006)
Chen, S. N., Wang, G. J.* and M. C. Chien, “Analytical modeling of piezoelectric vibration-induced micro power generator, “Mechatronics, Vol. 16, pp 379-387. (2006)
Wang, G. J.*, Yu, W. C., Lin, Y. H., Yang, H., “Modeling and Fabrication of a Piezoelectric Vibration-Induced Micro Power Generator,” Journal of Chinese Institute of Engineers, Vol. 29, No. 4. pp. 697-706. (2006)
Wang, G. J.* and Liu, H. R., “Piezoelectric Actuated Multiple Channels Optical Switch,” Analog integrated circuits and signal processing, Vol. 48, No. 1, pp15-20. (2006)
Wang, G. J.* and Peng, C. S., “Control Porous Pattern of Anodic Aluminum Oxide by Foils Laminate Approach,” Journal of Nanoscience and Nanotechnology, Vol. 6, No. 4, pp 1004-1008. (2006)
Wang, G. J.* and Yu, C. H., “Developing a Neural Network Based Run-To-Run Process Controller For Chemical Mechanical Planarization,” International Journal of Advanced Manufacturing Technology, Vol. 28, No. 9, pp 899-908. (2006)
Wang, G. J.* and Hsu, Y. F., “Structure Optimization of Microvascular Scaffolds” Biomedical Microdevices, Vol. 8, No. 1, pp 51-58. (2006)
Wang, G. J.*, Hsu, Y. F., Hsu, S. H., Horng, R. H. “JSR Photolithography Based Microvascular Fabrication and Cell Seeding” Biomedical Microdevices, Vol. 8, No. 1, pp 17-23. (2006)
Chang, Y. Z., Yang, M. W., Wang, G. J.*, “A New Mass Spectrometry Electro-Spray Tip Based on Precise Mechanical Micro Machining,” Analytical and Bioanalytical Chemistry, Vol. 383, No. 1, pp. 76-82. (2005)
Wang, G. J.*, Chen, C. L., Hsu, S. H., and Chiang, Y. L., “Bio-MEMS Fabricated Artificial Vascular Network for Tissue Engineering,” Microsystem Technologies, Vol. 12, No. 1-2, pp. 120-127. (2005)
Wang, G. J.* and Chou, M. H., “A Neural-Taguchi Based Quasi Time-Optimal Control Strategy For Chemical Mechanical Polishing Processes,” International Journal of Advanced Manufacturing Technology, Vol. 26, No. 7-8, pp. 759-765. (2005)
Wang, G. J.*, Lee, C. K., Hsu, C. C.,” Toward a Comprehensively Interdisciplinary Nanoscience and Nanotechnology Personnel Training Program In Taiwan,” INNOVATIONS 2005-World Innovations in Engineering Education and Research, Chapter IV. (2005)
Wang, G. J.*, Cheng, Y. D, Chang, K.,” A New Neural Fuzzy Control System with Heuristic Learning,” International Journal of Fuzzy Systems, Vol. 7, No. 4, pp. 158-168. (2005)
Wang, G. J.*, Yang, M. W., Chang, Y. Z. “Dead Volume Free Micro-machined Electro-spray Chip for Mass Spectrometry,” Biomedical Microdevices, Vol. 6, No. 2. pp. 159-164 (2004)
Yu, W. C. and Wang, G. J.*, “Discrete Sliding Mode Control with Forgetting Dynamic Sliding Surface,“ Mechatronics, Vol. 14, pp. 737-755. (2004)
Wang, G. J.*, Hsu, W. H., Chang, Y. Z., Yang, H. H. “Centrifugal and Electric Field Forces Dual-Pumping CD-Like Microfluidic Platform for Biomedical Separation,” Biomedical Microdevices, Vol. 6, No. 1, pp. 47-53. (2004)
Wang, G. J.*, and Song, S. W., Yu, W. C., “A New Discrete Dynamic Sliding Mode Controller for Singular Perturbed Servo Systems,” Journal of Chinese Society of Mechanical Engineers, Vol. 25, No. 1, pp 41-50. (2004)
Wang, G. J.* and Chou, M. H., Chang K., “New Orthogonalization And Conjugate Descendent Based Parameter Setting-Free Methods For The Backpropagation Algorithm,” Journal of Chinese Society of Mechanical Engineers, Vol. 24, No 5, pp. 499-505. (2003)
Wang, G. J.*, Wang, S. Y., and Chin, C. H., “Fabrication and Modeling of the Gray-scale Mask Based Aspheric Refraction Microlens Array,” JSME International Journal, Series C, Vol. 46, No. 4, pp. 1958-1603 (2003)
Yu, W. C. and Wang, G. J.*, “Discrete-Type Heuristic Self-Tuning PID Controller,“ Journal of Chinese Society of Mechanical Engineers, Vol. 24, No 2, pp. 181-186. (2003)
Wang, G. J.*, Wu, J. G., Chang K., “A New Neural Network Based Parameter Optimization Method,” Journal of Chinese Society of Mechanical Engineers, Vol. 24, No 2, pp. 99-109. (2003)
Wang, G. J.*, Fong, T. T., and K. J. Chang, “Neural Network-Based Self-Tuning PI Controller for Precise Motion Control of PMAC Motors,” IEEE Transaction on Industrial Electronics, Vol. 48, No. 2, pp 408-416. (2001)
Wang, G. J.*, Chen, J. L., and Hwang, J. Y., “New Optimization Strategy for Chemical Mechanical Polishing Process,” JSME International Journal, Series C, Vol. 44, No. 2, pp. 534-543. (2001)
Wang, G. J.*, and Chen, J. J., “Cascade Steepest Descendant Learning Algorithm for Multilayer Feedforward Neural Network,” JSME International Journal, Series C, Vol.43, No. 2, pp 350-358. (2000)
Wang, G. J.*, and Cheng, T. C., “A Robust Self-Tuning Learning Algorithm for Multilayer Feedforward Neural Network,” Neurocomputing, Vol. 25, pp167-189. (1999)
Wang, G. J.*, and Wang, C. C., "Reverse Engineering of Sculptured Surface by Four-Axis Non-Contacting Scanning," International Journal of Advanced Manufacturing Technology, Vol. 15, No. 5. (1999)
Wang, G. J.*, Luh, C. F., and Wang, C. C., "Intelligent 3D CAD Data Extracting System," JSME International Journal, Series C, Vol.41, No. 4, pp. 912-921. (1998)
Wang, G. J.*, and Yang, Y. Z., Chang, K., "A MDRS Network Based Intelligent Vision System," the International Journal of Knowledge-Based Intelligent Engineering Systems, Vol. 2, NO 1, pp. 17-31. (1998)
Wang, G. J.*, Tsai, J. C., Tzeng, P. C., and Cheng, T. C., "Neural-Taguchi Method for Robust Design Analysis," Journal of the Chinese Society of Mechanical Engineers Vol. 19, NO 2. pp. 223-230. (1998)
Wang, G. J.*, and Cheng, C. C., "A Fast Multilayer Neural Network Training Algorithm Based on the Layer-By-Layer Optimizing Procedures," IEEE Tran. on Neural Network, Vol. 7, No. 3, pp. 768-775 (1996)
王國禎*, 陳琮祺, 1996, " 類神經網路適應學習演算法," 興大工程學報, Vol. 7, No. 2, pp. 1-7. (1996)
王國禎*,黃仲麒, " 渦輪噴射引擎之類神經網路全域控制," 中國航空太空學刊, Vol. 28, No. 2, pp. 137-145. (1996)
王國禎*,黃仲麒, " 雙軸渦輪扇引擎之類神經網路控制器," 中國航空太空學刊, Vol. 28, No. 3, pp. 231-239. (1996)
(B)Conference proceedings
Lin, Y. T., Huang, C. F., and Wang, G. J., Fabrication of a perfusable artificial microvascular chip, ASME IDETC/CIE 2022, St. Louis, MO, USA
Wang, G. J. and Chang, C. C., The application of SERS platform in molecular detections, 2021 RIKEN-NCHU Symposium, 16 September, 2021.
Chan, Y. C., Wang, G. J., Chang, C. C., Three-dimensional plasmon-generating nanostructure for surface- enhanced Raman scattering and plasmon-enhanced fluorescence detection, AAAFM-UCLA 2021, Virtual, 22-24 August, 2021.
Sahoo, S. J., Chang, C. C., Wang, G. J., Composite 3D nanoplatform surface- enhanced Raman scattering and plasmon-enhanced fluorescence detection of serum bilirubin from jaundice, AAAFM-UCLA 2021, Virtual, 22-24 August, 2021.
Chen, L. D. and Wang, G. J., Detection of electrolytes based on solid-state ion-selective electrode, ASME IDETC/CIE 2021, Virtual, 17-19 August, 2021.
Li, C. Y., Peng, C. I., Hsu, H. J., Chang, C. C., Wang, G. J.*, Non-enzymatic and electrodeless detection of direct bilirubin using metal enhanced fluorescence effect, The ASME 14th International Conference on Micro- and Nanosystems, Virtual, (2020).
Chu, T. F. and Wang, G. J.*, A high-power non-enzymatic glucose biofuel cell based on a nano/micro hybrid-structured gold anode, 236th ECS, Atlanta, Georgia, USA. (2019)
Lin, Y. T., Kuznetsova, I., and Wang, G. J.*, Genetically modified soybean detection using a biosensor electrode with self-assembled gold nanoparticles on a micro hemisphere array, The ASME 13th International Conference on Micro- and Nanosystems, Anaheim, California, USA. (2019).
Wang, W. J., Lee, C. H., Li, C. W., Liao, S., Jan, F. J., and Wang, G. J.*, Direct label free detection of orchid virus using a micro/nano hybrid structured biosensor, The ASME 13th International Conference on Micro- and Nanosystems, Anaheim, California, USA. (2019).
Chen, S. T., Chang, J. C., Liu, C. S., and Wang, G. J., A novel centrifugal device for mass-production of healthy mitochondria, IEEE NANOMED 2018, Hawaii, USA. (2018).
Tung, Y. T., Jhang, R. N., Lin, Y. L., and Wang, G. J., Determine the binding epitope of the low affinity interaction between dengue virus and CLEC5A by a multivalent-interaction-reinforcing sensor surface, IEEE NANOMED 2018, Hawaii, USA. (2018).
Su, C. Y. and Wang, G. J.*, Development of a three-dimensional printer for water-soluble biomaterial printing, The ASME 12th International Conference on Micro- and Nanosystems, Quebec City, Quebec, Canada. (2018).
Lin, Y. C. and Wang, G. J.*, A novel biosensor electrode with self-assembled gold nanoparticles on a micro hemisphere array, Biosensors 2018, Miami, Florida, USA. (2018).
Lin, Y. C., Li, C. W., and Wang, G. J.*, A novel biosensor electrode with self-assembled gold nanoparticles on a micro hemisphere array, 2017 European Advanced Materials Congress, Stockholm, Sweden. (2017).
Li, C. W. and Wang, G. J.*, Double-layer nerve guide conduit with palisade poly(lactic-co-glycolic acid) tube wrapped by microporous chitosan–collagen composite, The ASME 11th International Conference on Micro- and Nanosystems, Cleveland, OH, USA. (2017).
Li, C. W., Su, C. H., Chang, C. C., and Wang, G. J.*,Detection of the mitochondrial DNA 8-hydroxy-2'-deoxyguanosine mutations via a fluorescence resonance energy transfer approach, The ASME 11th International Conference on Micro- and Nanosystems, Cleveland, OH, USA. (2017).
Tung, Y. T., Chu, J. C., and Wang, G. J.*, In vitro development of microvascular networks with a cylindrical fibrin scaffold, IEEE-NEMS 2017.
Tseng, R. C., Li, C. W., and Wang, G. J.*, Fabrication of biocompatible ordered iron oxide nanopillars for cell behavior observation, IEEE-NEMS 2017.
Tung, Y. T. and Wang, G. J.*, In vitro development of microvessels using a scaffold of cylindrical PLGA, The ASME 10th International Conference on Micro- and Nanosystems, Charlotte, NC, USA. (2016).
Hsiao, Y. H., Li, C. W., Chang, J. C., Liu, C. S., and Wang, G. J.*, A microfluidic device for green extraction of healthy mitochondria, GCBME 2016, Taipei, Taiwan. (2016)
Shen, M. C. and Wang, G. J.*, Electrochemical aptasensor for allergen Der p2 detection using a polycarbonate based double-generation gold nanoparticle chip, Biosensors 2016, Gothenburg, Sweden. (2016)
Lee, B. Y., Li, C. W., and Wang, G. J.*, A microporous chitosan/collagen composite encapsulated small tube of nanoporous anodic aluminum oxide for long-acting drug release, 2015 ASME International Mechanical Engineering Congress and Exposition, Houston, TX, USA. (2015). The Best Paper Award-MEMS Division.
Hsu,C. W. and Wang, G. J.*, Polymer anti-counterfeiting labels based on photonic crystal structural color, International Conference on Micro/Nano Optical Engineering, Tainan, Taiwan. (2015).
Hsu,C. W., Su,F. C., Peng,P. Y., Young,H. T., Yang,M.,and Wang, G. J.*, A novel non-enzymatic electrochemical glucose biosensor based on a simple lithographic process, The ASME 9th International Conference on Micro- and Nanosystems, Boston, MA, USA. (2015). The Best Paper Award.
Li, C. W., Yen, P. H., and Wang, G. J.*, A cascade microfluidic device for high quality mitochondria extraction. The ASME 9th International Conference on Micro- and Nanosystems, Boston, MA, USA. (2015).
Tung, Y.T., Wang, G. J.*, and Ju, J. C., Developing a microvascular network using a cylinder plga scaffold, The Biomaterials International Conference 2015,June 1-5, 2015, Kenting ,Taiwan.
Hsu, C. W., Hsieh, Y. D., and Wang, G. J.*, Quantum dots/silicon nanowire coaxial photoelectrode-based dye-sensitized solar cells, The 2015 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, April 27-30, Montpellier, France (2015).
謝侑達、王國禎,量子點/矽奈米柱同軸光電極之染料敏化太陽能電池,中國機械工程學會第三十一屆全國學術研討會(2014).
李寶英、林穎廷、李靜雯、王國禎,具奈米孔洞之陽極氧化鋁管於神經導管應用之製備,第十八屆奈米工程暨微系統技術研討會, (2014).
Hsu, C. W., Feng, W. C., Chang, K. J, and Wang, G. J.*, A novel and simple electrochemical glucose biosensor based on a silicon nanowire array electrode, The ASME 8th International Conference on Micro- and Nanosystems, Buffalo, NY, USA. (2014) The Best Paper Award.
Chen, C. C. and Wang, G. J.*, PCR free detection of hepatitis b virus DNA using a nanostructured impedance biosensor, The ASME 8th International Conference on Micro- and Nanosystems, Buffalo, NY, USA. (2014)
Pan, W. T., Wang, G. J.*, A novel control release platform of porous plga/gelatin composite for fast induction of mouse embryonic stem cell differentiation, Novel Biomaterials and Technology for use in Regenerative Medicine/Tissue Engineering, June 4, London, UK (2014)
Tung, Y. T., Wu, M. F., Wang, G. J.*, and Hsieh, S. L**, A novel method for detecting glycoprotein-ligand interactions between dengue virus and its receptor CLEC5A using a nanostructured biosensor, Biosensors 2014, May 27-30, Melbourne, Australia (2014).
Yen, P. H., Li, C. W., Wang, G. J.*, A cascade microfluidic device for high quality mitochondria extraction, Advances in Microfluidics & Nanofluidics, May 21-23, Academia Sinica, Taiwan (2014).
Feng, W. C., Hsu, C. W., Liu, H. C., and Wang, G. J.*, A cost effective and highly sensitive glucose biosensor based on a 3d silicon nanowire array electrode, The 2014 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, April 1-4, Cannes, France (2014).
馮文昭、王國禎*, “高靈敏奈米線陣列葡萄糖感測器”, 第十七屆奈米工程暨微系統技術研討會, (2013)-佳作
秦于婷、王國禎*, “過敏基因之單核苷酸多態性無標記檢測”, 第十七屆奈米工程暨微系統技術研討會, (2013)
Chung, I. C. and Wang, G. J.*, “Nanomolding of nanostructured biodegradable tissue engineering scaffolds,” Proceedings of the ASME 7th International Conference on Micro- and Nanosystems, DETC2013-12175, Portland, OR, USA. (2013)
Hsu, C. W. and Wang, G. J.*, “High aspect ratio Au/Ni coaxial nanorod arrays for biosensing applications,” Proceedings of the ASME 7th International Conference on Micro- and Nanosystems, DETC2013-12869, Portland, OR, USA. (2013)
Chin, Y. T. and Wang, G. J.*, “Detection of base pairs in single-nucleotide polymorphisms (SNP) using a nanostructured biosensor,” The 2013 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, April 16-18, Barcelona, Spain (2013).
Liu, H. C., Tsai, C. C., Chang, K. J., and Wang, G. J.*, “A highly sensitive biosensor based on a 3D gold nanostructure modified screen-printed electrode for glucose detection,” The 2013 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, April 16-18, Barcelona, Spain (2013).
Li, C. W. and Wang, G. J.*, “A material and surface morphology independent micro environment “niche” for tissue engineering,” paper # 120, IEEE-NEMS 2013, April 7-10, Suzhou, China (2013).
Wu, J. Y., Li, C. W., Tsai, C. H., and Wang, G. J.*, “Synthesis of antibacterial TiO2/PLGA composite biofilms,” paper # 121, IEEE-NEMS 2013, April 7-10, Suzhou, China (2013).
Wang, G. J.*, Liu, Y. F., Wu, Wu, C. C., “In-vitro allergy detection using a silver nanoparticle modified nanostructured biosensor,” Proceedings of the ASME 6th International Conference on Micro- and Nanosystems, DETC2012-70299, Chicago, IL, USA. (2012)
Lin, Y. W. and Wang, G. J.*, “Measurement of adhesion of bovine endothelial cells on different materials using dielectrophoresis,” Proceeding of the 2012 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, (2012).
Tsai, Y. T. and Wang, G. J.*, “Control of the ion diffusion coefficient in a nanochannel,” Proceeding of the 2012 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, (2012).
Chen, Y. S. and Wang, G. J.*, “A high sensitivity and low-cost polycarbonate (pc)-based biosensor,” paper # 3, IEEE-NEMS 2012, March 6-8, Kyoto, Japan.
Li, C. W., Chen, J. L., Wu, C. C., Wang, G. J.*, “The optimal vibrational shear stress for bovine endothelial cell proliferation,” paper # 183, IEEE-NEMS 2012, March 6-8, Kyoto, Japan.
王曉威、鄭中緯、張漢威、吳秉翰、王國禎,”利用飛秒雷射製作人工微血管3D立體支架”,中國機械工程學會第二十八屆全國學術研討會(2011)
Chen, Y. S. and Wang, G. J.*, “Nanomolding of hemisphere array using anodic aluminum oxide template”, 第十五屆奈米工程暨微系統技術研討會, (2011)
Wang, H. W., Cheng, C. W., Li, C. W., Chang, H. W., Wu, P.H., Wang, G. J.*, “Realization of artificial microvessel networks using pillared PLGA microvessel scaffold”, 第十五屆奈米工程暨微系統技術研討會, (2011)
Bau, I. J. And Wang, G. J.*, “A highly sensitive electrochemical impedimetric nanobiosensor for dust mite antigen Der p2 detection”, Proceedings of the ASME 5th International Conference on Micro- and Nanosystems, DETC2011-47123, Washington DC, USA. (2011)
Wang, H. W., Cheng, C. W., Li, C. W., Wang, G. J.*, “Fabrication of pillared PLGA microvessel scaffold using femtosecond laser ablation”, Proceedings of the ASME 5th International Conference on Micro- and Nanosystems, DETC2011-47532, Washington DC, USA. (2011)
Li, C. W. Chen, J. L., Wang, G. J.*, “A simple method for investigating the optimal shear stress for cell growth“, Proceedings of the 5th World Congress on Bioengineering, August 18-21, 2011, Tainan, Taiwan.
林宜薇、李靜雯、王國禎,“以介電泳力量測牛頸動脈內皮細胞在不同生醫材料之貼附效果”,2011年生物醫學工程科技研討會(2011)
Tsai, Y. T and Wang, G. J.*, “Measurement of Diffusivity in Nanochannels,” Proceeding of the 2011 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, (2011)
Ho, J. Y. and Wang, G. J.*, “Fabrication of High Aspect Ratio Nanoporous Array on Silicon,” Proceeding of the 2011 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, (2011)
李靜雯、顏榮信、王國禎*,” TiO2/PLGA複合抗菌薄膜”, 2010年生物醫學工程科技研討會(2010)
王峙評、王國禎*,”正向光之奈米結構新型染料敏化太陽能電池”,中國機械工程學會第二十七屆全國學術研討會(2010)
王曉威、陳勇州、張漢威、鄭中緯、王國禎*,”利用飛秒雷射進行組織工程支架製作”, 2010全國精密製造研討會(2010)
Wang, G. J.*, “Applications of Nanotechnology in Biomedical Micro/Nano Devices,” 2010 International Conference on Solid State Devices and Materials, SSDM-8049, Sep., 2010, Tokyo, Japan (Invited).
何京諭、王國禎*,” 高深寬比矽基奈米孔洞陣列元件製備”, 第十四屆奈米工程暨微系統技術研討會, A01-02. (2010)
張政嶢、王國禎*,”陽極氧化鋁膜奈米二極體”,第十四屆奈米工程暨微系統技術研討會, D11-02. (2010)
Li, C. W. and Wang, G. J.*, “investigation of the influences of micro vibrational stimuli and hydrophilicity of a scaffold on a bovine endothelial cell culture,” Proceedings of the ASME 4th International Conference on Micro- and Nanosystems, 10-DETC-28115, Montreal, Quebec, Canada. (2010)
Wang, G. J.*, Lin, Y. H., and Chang, K., “A Novel Chip-on-Glass method for Slim LCD Packaging,” Proceeding of the 2010 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, (2010)
李靜雯、王國禎*,”奈米結構與微水平震動平台對細胞生長之影響研究”, 2009年生物醫學工程科技研討會(2009)。
林祐弘、王國禎,”薄型化平面顯示器之新玻璃覆晶封裝技術”,中國機械工程學會第二十六屆全國學術研討會 (2009)
陳國揚、王國禎,” 3D奈米結構染料敏化太陽能電池”,中國機械工程學會第二十六屆全國學術研討會 (2009)
Wang, G. J., Chen, G. Y., Lin, Y. C., " A Lab-on-a-Chip Capillary Network for Red Blood Cell Diagnosis," Proceedings of the ASME 3rd International Conference on Micro- and Nanosystems, 09-DETC-87299, San Diego, California, USA. (2009)
周世瑋、王國禎,“新型3D奈米結構光觸媒製備“, 第十三屆奈米工程暨微系統技術研討會, 11-1216. (2009)
王啟光、王國禎,“類金屬氧化物場效電晶體之新型紅外線感測器“, 第十三屆奈米工程暨微系統技術研討會, 07-1217. (2009)
Wang, G. J. and Lin, Y. D., “A 3-Dimensional Nanobiosensor Based on an Anodic Aluminum Oxide Template,” Proceeding of the Nanotech 2009, #284, May 3-7, Houston, Texas, USA. (2009)
Hsu, C. W. and Wang, G. J., “Fabrication of Patterned Array of Alumina-Metal Coaxial Nanorods,” Proceeding of the 2009 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, #1001. (2009)
林侑達、王國禎*,”以陽極氧化鋁模板製備3D均勻分布之奈米金粒子生物感測器”, 2008年生物醫學工程科技研討會(2008)
Lee, J. W., Wang, G. J.*, Lin, Y. C., Hsu, S. h., Hung, H. S., “Fabrication of orderly nanostructured plga scaffolds using anodic aluminum oxide templates,” 2008年生物醫學工程科技研討會(2008)
林晏成、王國禎、徐善慧、洪慧珊,”表面奈米結構之生物可降解人工微血管支架製作”, 2008年生物醫學工程科技研討會(2008)
Sheu, Z. W. and Wang, G. J.*, “Fabrication of high aspect ratio alumina-metal coaxial nanorod arrays through electroforming,” 中國機械工程學會第二十五屆全國學術研討會 (2008)
Wang, G. J.* and Sheu, Z. W., “Fabrication of patterned array of alumina-metal coaxial nanorods,” 2008第六屆全國精密製造研討會, 崑山科技大學 (2008)
Wang, G. J., Chien, M. C., "Nanopore size estimation using electrochemical impedance spectroscopy analysis," Proceedings of the ASME 2nd International Conference on Micro- and Nanosystems, 08-DETC-49699, New York City, USA. (2008)
Wang, G. J., "A Novel Chloroplastmimic Photovoltaics Powered by Proton Motive Force," Proceedings of the 8th Emerging Information and Technology Conference, Tainan, Taiwan. (2008)
Hsueh, C. C., Wang, G. J., Hsu, S. h, Hung, H. S., “Fabrication of nanostructured PLGA scaffolds using anodic aluminum oxide templates,” Proceeding of the 2008 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, #1091. (2008)
王國禎*、陳逸宏,”以直立式奈米碳管陣列提升TiO2光觸媒之光催化效能”, 中國機械工程學會第二十四屆學術研討會,E02-0013,(2007)
H. T. Chen and G. J. Wang*, " Fabrication of 3D Nano-structured Indium Tin Oxide Films by RF Magnetron Sputtering ",中國機械工程學會第二十四屆學術研討會,E02-0012,(2007)
薛丞智、王國禎*、徐善慧、洪慧珊,” 以陽極氧化鋁模模板製備圖案化生物可降解奈米生醫材料”,中國機械工程學會第二十四屆學術研討會,E07-0001,(2007)
Wang, G. J., Shueh, C. C., "Fabrication of PLGA Microstructures Made Up of Circular Microchannels Using Soft Lithography," Proceedings of the ASME 1st International Conference on Micro- and Nanosystems, 07-DETC-34321, Las Vegas, USA. (2007)
Wang, G. J., Shueh, C. C., "A Novel Chloroplastmimic Photovoltaics with Full Visible Spectrum Operation," Proceedings of the ASME 1st International Conference on Micro- and Nanosystems, 07-DETC-34322, Las Vegas, USA. (2007)
林宴成、陳國揚、王國禎,”以流體力學模擬血球在微血管晶片中之運動”,第十屆工程科技與中西醫學應用研討會(2007)
薛丞智、王國禎、徐善慧、洪慧珊,” 以陽極氧化鋁模結合真空抽氣法製備PLGA奈米生醫材料”,第十屆工程科技與中西醫學應用研討會(2007)
Wang, G. J., Ho, K. H., Hsueh, C. C., “Biodegradable polylactic acid (PLA) microstructures for scaffold applications,” Proceeding of the 2007 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, pp 260-263. (2007)
Wang, G. J., Chen, W. Z., Chang, K., “A two-step etching method to fabricate nanopores in silicon,” Proceeding of the 2007 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, pp 169-172. (2007)
Wang, G. J., Chen, W. Z., Lee, M. W., “A Novel Chloroplastmimic Photovoltaics with Full Visible Spectrum Operation,” Taiwan-Japan Bilateral Symposium on Research and Education of Nanotechnology, Tokyo, Japan. (2006)
Chien, M. C., Yang, F. C., and Wang, G. J.*, “Modeling of ion diffusion induced current through a nanochannel”, European Nano Systems 2006. Dec. 14-15, Paris, France.
Fan, J. Y., Yang, F. C., Chien, M. C., and Wang, G. J.*, “Experimental investigation on the bi-directional growing mechanism of the foils laminate approach in aao fabrication,” European Nano Systems 2006. Dec. 14-15, Paris, France.
Wang, G. J.* and Fan, J. Y., “Growing Nano-Capsule Array inside an Alumina Foil by the Laminate Foils Approach,” 第九屆奈米工程暨微系統技術研討會, (2006)
王國禎*、陳維正,”離子滲透驅動之仿葉綠體機制新太陽能光電池,” 第九屆奈米工程暨微系統技術研討會, (最佳論文獎) (2006)
陳維正、王國禎、廖俊旺、鍾婷婷、陳逸宏、廖炳創、林哲聖、陳鯤兆,” 微奈米化板藍根之效能評估”,第九屆工程科技與中西醫學應用研討會,(優勝)。(2006)
何官璇、王國禎、徐善慧、王冠卜,”具圓形管道之組織工程人工微血管支架製作與細胞培養”,第九屆工程科技與中西醫學應用研討會,(佳作)。(2006)
Wang, G. J., Lin, Y. C., Lin, G. S., “Ultra Fine Pitch Flat Panel Display Packaging Using 3mM Conductive Particles,” Proceeding of the 2006 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, pp 20-24. (2006)
Wang, G. J., Lin, Y. C., Lin, G. S., “ A Novel Contact Resistance Model of Anisotropic Conductive Film For FPD Packaging,” Proceeding of the 2006 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, pp 105-109. (2006)
Wang, G. J. and Chang, W. C., “Imitation of the ion diffusion and ion pumping mechanisms of a living cell by nanoporous alumina membrane,” European Nano Systems 2005, Dec. 14-16, Paris, France.
Wang, G. J. and Peng, C. S., “Control Porous Pattern of Anodic Aluminum Oxide by Foils Laminate Approach,” European Nano Systems 2005, Dec. 14-16, Paris, France.
Wang, G. J., “Structure Optimization, Fabrication, and Cell Seeding of Microvessel Scaffold for Tissue Engineering,” 1st International Forum of Tissue Engineering and Clinical Adult Stem Cell Therapy, Taichung, Taiwan. (2005)
王國禎、彭及聖,“以鋁疊層法製作圖案化陽極氧化鋁膜板”,第九屆奈米工程暨微系統技術研討會。(2005)
王國禎、張文喬、楊錫杭,“人工離子幫浦”,第九屆奈米工程暨微系統技術研討會。(2005)
Wang, G. J. and Liu H. R.,“Piezoelectric Actuated Multiple Channels Optical Switch, ” Proceeding of the 2005 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, pp 268-272. (2005)
Wang, G. J., Chang, J. H., and Yang H., “Triplex-Pumping CD-Like Microfludic Platform with Parabolic Microchannels,” Proceeding of the 2005 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, pp 49-55. (2005)
王國禎、劉鴻儒,”壓電驅動之多通道光開關之設計與製作” ,中國機械工程學會第二十屆學術研討會,(2004)
王國禎、羅國寧,”銅化學機械研磨之灰色預測批次控制”,中國機械工程學會第二十屆學術研討會,(2004)
王國禎、張峻豪、楊錫杭,” 三重推動力新型分離晶片平台”,中國機械工程學會第二十屆學術研討會,(2004)
Chen, S. N., Wang, G. J., Yu, W. C., “Analytic Modeling and Experimental Verification of Thin-film Piezoelectric Vibration-Induced Micro Power Generator,” The 2004 ASME International Mechanical Engineering Congress, Paper # 59543. (2004)
Wang, G. J., Lin, B. S., Chang, K., “Neural Network Based Run-To-Run Process Controller For Copper Chemical Mechanical Polishing”, The 2004 ASME International Mechanical Engineering Congress, Paper # 59546. (2004)
Wang, G. J., and Hsu, C. C., “Toward A Comprehensively Interdisciplinary Nanoscience and Nanotechnology Personnel Training Program,” Proceeding of the 2004 International Conference on Engineering Education and Research, pp. 773-778. (Plenary Session) (2004)
徐一峰、王國禎、趙啟南、陳弘育、洪瑞華,”以JSR負型光阻製作組織工程之人工微血管”, 第七屆工程科技與中西醫學應用研討會,pp. 51,(佳作) (2004)
Wang, G. J., Chen, C. L., Hsu, S. H., and Chiang, Y. L., “Bio-MEMS Fabricated Artificial Vascular Network for Tissue Engineering,” Proceeding of the 2004 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, Montreux, Switzerland, pp. 355-360. (2004)
Yu, W. C., Wang, G. J., and Chang, C. C., “Discrete Sliding Model Control with Forgetting Dynamic Sliding Surface,” ICICS 2003. (2003)
Wang, G. J. , Yu, W. C., and Chang, C. C., “Model Reference Based Sliding Mode Controller with Application to AC Servomotors Precise Positioning,” ICICS 2003. (2003)
楊慕文,王國禎, “精密加工技術於質譜儀新式電噴灑頭之製造應用”,中國機械工程學會第二十屆學術研討會,E08-07。(2003)
徐文浩,王國禎,張耀仁,楊錫杭, “以金屬光罩法製作導電層之圓盤式電泳晶片分離系統”,中國機械工程學會第二十屆學術研討會,E01-27。(2003)
王國禎,林伯勳, “銅製程CMP之類神經網路批次製程控制“,中國機械工程學會第二十屆學術研討會,E03-04。(2003)
Yu, W. C. and Wang, G. J., “Discrete Suboptimal Frequency-Shaped Sliding Mode Control, “ ICMT 2003. (2003)
Wang, G. J., Lin, Y. H., Yang, H. H., Pan, C. T., “Design And Fabrication Of A High Efficiency Piezoelectric Vibration-Induced Micro Power Generator,” The 2003 ASME International Mechanical Engineering Congress, Paper # 42682. (2003)
Yu, W. C. and Wang, G. J., “Discrete Sliding Mode Controller Design Based on the Suboptimal LQR Approach,“The 2003 ASME International Mechanical Engineering Congress, Paper # 42589. (2003)
陳季良,江郁霖,王國禎,徐善慧, “以生醫微機電技術製作組織工程之人工微血管,” 第六屆工程科技與中西醫學應用研討會。(2003)
徐文浩,王國禎,張耀仁,楊錫杭, “電場力與離心力交互作用之新型類光碟機式微電泳生醫分離系統,” 第九屆化學感測器科技研討會,pp. 27 (論文獎)。(2003)
徐文浩,王國禎,張耀仁,王建良, “薄膜式電泳生物晶片製作,” 第九屆化學感測器科技研討會,pp. 277。(2003)
Yu, W. C. and Wang, G. J., 2003, “Design of Discrete-type Heuristic self-tuning PID Controller on AC Servomotor Control,”自動控制研討會,pp 1072-1076。(2003)
王國禎,楊錫杭,林盈旭,潘正堂, “薄膜式壓電型微發電機設計與製程研究,” 2002奈米工程暨微系統技術研討會,3C-7。(2002)
王國禎,胡雅晴, “類神經網路式Run-to-Run控制器在銅CMP之應用,” 中國機械工程學會第十九屆學術研討會,E3-004。(2002)
王國禎,陳皇仁, “複合式光學元件設計與製作,” 中國機械工程學會第十九屆學術研討會,E1-011。(2002)
王國禎,李建誼,黃國政, “光學鏡片成型後表面殘留應力層之檢測,” 中國機械工程學會第十九屆學術研討會,D7-006。(2002)
Wang, G. J., Cheng, W., Yang, J, and Pan, C., “Aspheric Micro-Lens-Array fabricated by excimer laser dragging,” The 2002 ASME International Mechanical Engineering Congress, Paper # 34306. (2002)
Tsai, J. C. and Wang, G. J., “Design and Prototyping A Wireless Autonomous Guided Vehicle in Undergraduate Mechanical Design Practice," Proceedings of the 2002 International Conference on Engineering Education, paper No. 0309, Manchester, United Kingdom. (2002)
Tsai, J. C. and Wang, G. J., Chiou, S. J., Chen, J. L., Fann, K. J., and Chen, T. Y., “A Curriculum in Machine Tools Technologies for Mechanical Engineering Graduates,” Proceedings of the 2002 International Conference on Engineering Education, paper No. 0219, Manchester, United Kingdom. (2002)
Wang, G. J., S. Y. Wang, and Chin, C. H., “Fabrication and Modeling of the Gray-scale Mask Based Aspheric Refraction Microlens Array,” Proceeding of the 2002 Design, Test, Integration and Packaging of MEMS/MOEMS Conference, France, pp. 765-775. (2002)
王述宜,王國禎,秦志賢, “灰階非球面折射式微透鏡陣列之UV-LIGA製程技術,” 中國機械工程學會第十八屆學術研討會. (2001)
楊詔中,程偉倫,潘正堂,王國禎, “準分子雷射拖拉法於3D微結構加工成型之應用,” 中國機械工程學會第十八屆學術研討會. (2001)
王國禎, 游政雄, “化學機械研磨之類神經網路式Run-to-Run製程控制,” 中國機械工程學會第十八屆學術研討會. (2001)
王國禎, 張俊卿,余文俊, " 模式參考強健離散動態滑動模式控制器設計," 中國機械工程學會第十八屆學術研討會. (2001)
余文俊、王國禎, ”次佳化離散滑動模式控制,” 中國機械工程學會第十八屆學術研討會. (2001)
余文俊、王國禎, ”離散模式參考參數自調PID控制器,” 中國機械工程學會第十八屆學術研討會. (2001)
Wang, G. J. and Chou, M. H., “A Neural-Taguchi Based Quasi Time-Optimal Control Strategy For Chemical Mechanical Polishing Processes,” 2001 ASME International Mechanical Engineering Congress, Paper # EEP-15-1. (2001)
王國禎, 張俊卿,余文俊, " 模式參考離散動態滑動模式控制器設計," 第十二屆全國自動化科技研討會, 4304C-4. (2001)
王國禎, 游政雄,楊耀眾,謝佳璋, “四行程引擎最佳點火角度之類神經網路全域控制,” 第十二屆全國自動化科技研討會, 4201C-2. (2001)
王國禎, 游政雄, “以類神經田口法為基礎之化學機械研磨終點偵測技術,” 第十二屆全國自動化科技研討會, 4202B-1. (2001)
Chen, J. L., Wang, G. J., Guo, B. H., and Tsai, M. S., “Process Parameters analysis for CMP Pad Conditioning,” Proceeding of the Symposium on Nano Device Technology 2001, HsinChu, Taiwan, pp 134-137. (2001)
王國禎, 張俊卿,宋世偉, " 模式參考離散動態滑動模式控制法則," 2000工業自動控制與電力應用研討會論文集, 義守大學, pp. E2-13~E1-23. (2000)
王國禎, 游政雄,謝佳璋,陳柏熹, “類神經網路在四行程引擎最佳點火角度控制應用,” 2000工業自動控制與電力應用研討會論文集, 義守大學, pp. E1-8~E1-16. (2000)
王國禎, 周孟賢, " 化學機械研磨時控製程參數最佳化技術," 中國機械工程學會第十七屆學術研討會新興工程技術組論文集, 高雄第一科技大學, pp 478-494. (2000)
王國禎, 馮毓鈞, 江雨龍, " 光學微影參數設定最佳化," 中國機械工程學會第十七屆學術研討會新興工程技術組論文集, 高雄第一科技大學, pp 481-486. (2000)
王國禎, 宋世偉, " 奇異擾動動態滑動模式控制," 中國機械工程學會第十七屆學術研討會控制與自動化組論文集, 高雄第一科技大學. (2000)
王國禎, 徐俊豪, 張亢治, " 以二維雙邊指數函數為邊緣模型之次像素邊緣檢測新技術," 中國機械工程學會第十七屆學術研討會製造與材料組論文集, 高雄第一科技大學, pp 373-380. (2000)
王國禎, 徐俊豪, 張亢治, " 強健之一維次像素邊緣檢測新技術," 中國機械工程學會第十七屆學術研討會製造與材料組論文集, 高雄第一科技大學, pp 561-568. (2000)
Wang, G. J., Chen, J. L., and Hwang, J. Y., “A New Optimization Strategy For Chemical Mechanical Polishing Process,” Proceeding of the 2000 ASME International Mechanical Engineering Congress, Orlando, Florida. (2000)
Tsai, J. C. and Wang, G. J., August, “Prototyping An Autonomous Guided Vehicle in Undergraduate Mechanical Design,” Proceeding of the 2000 International Conference on Engineering Education, paper WD1-5, Taipei, Taiwan. (2000)
Wang, G. J. and Yeh, J. Y., “A Robust Sliding Mode Controller for Singular Perturbation System,” Proceeding of The Sixth International Conference on Automation Technology, Taipei, pp 609-616. (2000)
Wang, G. J., Wu, J. G., Chang K., “A New Neural Network Based Parameters Optimization Method,” Proceeding of The Sixth International Conference on Automation Technology, Taipei, pp 703-710. (2000)
王國禎, 黃朱瑜, 陳昭亮, 蔡明蒔, " CMP製程參數最佳化技術", 中國機械工程學會第十六屆學術研討會新興科技組論文集, 清華大學, pp 517-524. (NSC-88-2212-E-005-016) (1999)
王國禎, 周孟賢, " 多層前饋類神經網路參數自調學習法則", 中國機械工程學會第十六屆學術研討會控制與自動化組論文集, 清華大學, pp. 327-334. (1999)
王國禎, 葉智鎰, “奇異擾動系統之滑動模式控制器設計, ” 第十一屆全國自動化科技研討會論文集, pp 307-314. (1999)
王國禎, 吳嘉哲, “類神經網路式參數最佳設計法則及其在線性馬達精密定位控制之應用, ” 第十一屆全國自動化科技研討會論文集, pp 1161-1168. (1999)
Tsai, J. C. and Wang, G. J., and Chiou, S. J., "Teaching Undergraduate Mechatronics in Mechanical Design," Proceedings of the 1999 International Conference on Engineering Education, paper number 242, Ostrava, Czech Republic. (1999)
Wang, G. J. and Huang, C. Y, “A New Optimization Approach for CMP Process, “Proceeding of the 6th Symposium on Nano Device Technology, Taiwan, pp. 119-119. (NSC-88-2212-E-005-016) (1999)
Wang, G. J. and Chen, T. J., “ Cascade Steepest Descendant Learning Algorithm for Multilayer Feedforward Neural Network,” Proceeding of the International Joint Conference of Neural Networks’99, paper # 753, Washington, USA. (1999)
Wang, G. J. and Lee, T. C., “Neural Network Cross-coupled Control System with Application on Circular Tracking of Linear Motor X-Y Table,” Proceeding of the International Joint Conference of Neural Networks’99, paper # 754, Washington, USA. (1999)
王國禎、黃朱瑜, " 輻射基底函數式類神經模糊網路", 1999自動控制研討會, 台中, pp. 278-283. (1999)
王國禎、陳盈達, ," 啟發式類神經模糊學習控制系統", 中國機械工程學會第十五屆學術研討會控制與自動化組論文集, 成功大學, pp. 207-214. (1998)
王國禎、陳在均, " 類神經網路二階段式最陡負梯度學習法則", 中國機械工程學會第十五屆學術研討會控制與自動化組論文集, 成功大學, pp. 379-386. (1998)
王國禎、李宗璟, " 類神經網路交叉耦合控制系統及其在雙軸線性馬達循圓控制之應用", 中國機械工程學會第十五屆學術研討會控制與自動化組論文集, 成功大學, pp. 69-76 (NSC-87-2212-E-005-009). (1998)
Wang, G. J. and Tsai, M. S., “Heuristic Neural Network Learning Control System with Application on AC Servo Motor Precise Positioning,” Proceeding of the 1998 International Conf. On Mechatronic Technology, pp. 275-280 (NSC-86-2212-E-005-015). (1998)
Wang, G. J. and Fong, T. T., " Neural Network-Based Self-Tuning PI Controller for Precise Motion Control of PMAC Motors," Proceeding of the 1998 International Conf. On Mechatronic Technology, pp. 349-354. (NSC-86-2212-E-005-024). (1998)
Tsai, J. C., Chein, R., Chen, T. Y., and Wang G. J., Feb. A Trail on College Curriculum in Mechanical Design and Prototyping, 1St UICEE Annual Conference on Engineering Education, Monash University, Clayton, Melbourne, VIC 3168, Australia. (1998)
Wang, G. J., and Wang, C. C., "Reconstruction of Sculptured Surface on Reverse Engineering," Proceeding of the 1997 ASME Computers in Engineering Conference, Sacramento, California, USA. DETC97/CIE-4288 (NSC-86-2212-E-005-015). (1997)
王國禎、馮傳宗, " 交流伺服馬達類神經網路式PI自調精密定位控制", 中國機械工程學會第十四屆學術研討會現代工程技術組論文集, 中央大學,pp. 325-332 (NSC-86-2212-E-005-024). (1997)
王國禎、蔡木樹, " 啟發式類神經網路學習控制在AC伺服馬達強健控制之應用", 中國機械工程學會第十四屆學術研討會控制與自動化組論文集, 中央大學,pp. 210-217 (NSC-86-2212-E-005-015). (1997)
簡瑞與﹐蔡志成﹐王國禎﹐張銘永﹐林麗章﹐大學院校製作自動化及機電整合科技教育改進計畫執行成果之探討﹐中華民國第十三屆科學教育學術研討會﹐台北市. (1997)
王國禎、陳琮祺, " 前饋式類神經網路進階參數自調學習法則", 中國機械工程學會第十三屆學術研討會系統控制組論文集, 台灣大學,pp. 334-343. (1996)
王國禎、楊雲仁, " MDRS網路在智慧型影像辨識系統之應用", 中國機械工程學會第十三屆學術研討會系統控制組論文集, 台灣大學,pp. 273-281. (1996)
Wang, G. J., Tsai, J. C., Tzeng, P. C., and Cheng, T. C., "Neural-Taguchi Method for Robust Design," Proceedings of the 1996 ASME Computers in Engineering Conference, 96-DETC/CIE-1327, Irvine, California, USA (NSC 86-2212-E005-015). (1996)
Tseng, P. C. and Wang, G. J., "Tool Failure Recognition in End Mill," Proceedings of the Fourth International Conference on Automation Technology, AUTOMATION'96, VOL. I, pp 743-750, Hsinchu, Taiwan. (1996)
王國禎、黃仲麒, "智慧型類神經網路之渦輪引擎控制系統", 中國航空太空學會第三十七屆學術研討會論文集,淡江大學, pp. 553-562 (NSC 83-0424-E005-001). (1995)
王國禎、黃仲麒, "渦輪噴射引擎之類神經網路全域控制", 中國航空太空學會第三十七屆學術研討會論文集,淡江大學, pp. 543-551 (NSC 83-0424-E005-001). (1995)
王國禎、陳琮祺, ,"類神經網路適應學習演算法", 中國機械工程學會第十二屆學術研討會系統控制組論文集, 中正大學,pp. 181-185. (1995)
王國禎、陳忠信, "啟發式類神經網路學習控制系統", 中國機械工程學會第十二屆學術研討會系統控制組論文集, 中正大學,pp. 197-204 (NSC 83-2212-E005-003). (1995)
王國禎、盧俊宏, " 智慧型三度空間曲面資料擷取系統", 中國機械工程學會第十二屆學術研討會系統控制組論文集, 中正大學,pp. 467-477. (1995)
Wang, G. J., and Luh, C. F., "Neural Network Approach for Repetitive Control System Design," the 1995 ASME International Mechanical Engineering Congress and Expositon, November, San Francisco, DSC-Vol. I, pp. 573-560 (NSC 83-0401-E005-038). (1995)
陳柏熹、王國禎, "類神經網路在飛行縱向控制系統上之應用",中華民國第二屆模糊理論與應用研討會論文集,pp 587-598 (NSC-83-0424-E005-001). (1994)
王國禎、陳志成, "反向傳播型類神經網路準最佳學習法則", 1994中華民國自動控制研討會論文集,pp 77-80. (1994)
Wang, G. J. and Liu, S. H., "A New Fuzzy-Neural Learning Control Algorithm", The Third International Conference on Automation Technology, AUTOMATION'94, Taipei, Taiwan, Vol. III, pp115-120. (1994)
Wang, G. J., and Cheng, C. C., "Optimal Learning Algorithm for Multilayer Feedforward Neural Networks," IEEE World Congress on Computational Intelligence, Orlando, Flordia, Vol. II, pp 850-855. (1994)
(C)專業雜誌文章、專書
王國禎、楊烽正、余文俊,”視窗介面微電腦感測與控制應用實務”,2003,全華圖書公司。
王國禎,”生泰合成工業股份有限公司”,經濟部技術處申請執行科技專案管理制度評鑑-研發管理個案實例報告,1-12頁,2003年12月。
簡瑞與、林麗章、王國禎、蔡志成、邱顯俊、陳昭亮與蔡明蒔,2000年二月,“化學機械研磨製程與實驗機台之研究”,機構與機器設計,第十一卷第一期,13-20頁。
陳定宇、林麗章、王國禎、曾柏昌、蔡志成與邱顯俊,1998年二月,“CNC車削中心C軸研發現況”,機構與機器設計,第九卷第一期,8-14頁。
王國禎,1996 “自動化次系統-實習教材,” 教育部製造業自動化科技教育改進計畫。
王國禎,1994 ,“工業電子感測器-實習教材,” 教育部製造業自動化科技教育改進計畫。
(D)專利