Tron Charging Station

The team worked hard to design and develop the charging station of the tron disc. The tron disc is charged when connected to this base station. The charging station consist of an LED which start blinking when the disc is placed on it and is charging

The base station consist of the following components

1. Arduino Nano
2. LED
3. 220 ohm resistance

/* This should turn the led on pin 11 on if the button connected to pin 12 is pushed.

Should also function to send a HIGH signal to second board when jumper is moved. */

#define INPUT_PIN 10 /* Receiver pin from another Arduino*/

const int tosecondarduino = 7; /* Sending PIN to second Arduino*/

//const int tosecondarduino = 8;

int test = 0;

void setup() {

pinMode (tosecondarduino, OUTPUT); /* Output PIN for second Arduino*/

pinMode(2, OUTPUT); /* LED */

// pinMode(3, OUTPUT);

// pinMode(4, OUTPUT);

pinMode(INPUT_PIN, INPUT_PULLUP);

}

void loop() {

digitalWrite (tosecondarduino,LOW); /* Sending signal regularly*/

if(test==1)

{

digitalWrite(2, LOW);

test--;

}

while(digitalRead(INPUT_PIN) != LOW)

{

if(test==0)

{

test++;

}

digitalWrite(2, HIGH);

}

digitalWrite(2, LOW);

// if (digitalRead(10) == HIGH) digitalWrite(2, HIGH);

// else digitalWrite(2, LOW);

}