Published over 30 SCI(E)-indexed journal articles (11 as first author and 14 as corresponding author)
and registered 6 patents.
(† : These authors contributed equally to this work. *: Corresponding author)
2025
1. S Kim, H Woo, S Yoon, HG Shin, K Kim, G. H. Kim*, G Lim*, Saline based microfluidic soft pressure sensor utilizing a three-dimensional focused electric field for motion and healthcare monitoring, Biosensors and Bioelectronics, 267.1 (2025) 116868.
2. M. J. Choi, S. Y. Kim, J. Shin*, G. H. Kim*, Advanced Anti-counterfeiting: Angle-dependent Structural Color Based CuO/ZnO Nanopatterns with Deep Neural Network Supervised Learning, ACS Applied Materials & Interfaces, 17.13 (2025) 20361-20373.
3. N. K. Kim, S. M. Kang, T. Kim, S. Kim*, G. H. Kim*, Electroless Plating on Polymer Surfaces: Comprehensive Review of Mechanism, Process, Analysis and Future Applications, Advanced Materials Interfaces, 12.11 (2025) 2400931.
4. H. Woo, S Yoon, Y. J. Park, S. Kim, S. K. Hong, K. Kim, G. H. Kim*, G Lim*, An Electrospun Polystyrene Fibrous Membrane with a Mechanically Reduced Pore Size Exhibits Efficient Gravity-Driven Separation of a Water-in-Oil Emulsion, Advanced Sustainable Systems, (2025) 2500040
5. I. T. Kim, T. Koo, H. K. Park, W. Lee, G. H. Kim, B. Park*, Y. Kim*, Y. S. Park*, Investigation of Oxygen Evolution Reaction Activity in NiFe-LDH with Modulated Electron Density via PANI Coating, Korean Journal of Metalsand Materials, (2025)
6. S. Yoon, H. Woo, G. H. Kim, S. M. Kang, W. Choi, S. Kim*, G. Lim*, Elastomeric deformation-assisted nanochannel fabrication using electrospun polymer fibers for micro/nanofluidic system, Sensors and Actuators B: Chemical, 443 (2025), 138281.
7. M. J. Choi, D. H. Yoon, Y. S. Park, H. Nam*, G. H. Kim*, Development of a Flexible and Conductive Heating Membrane via BSA-assisted Electroless Plating on Electrospun PVDF-HFP Nanofibers, Applied Sciences, 15.14, (2025), 8023.
8. S. Kim, S. Yoon, H. Nam, H. Woo, W. Choi, G. H. Kim, G. Lim, Chemical-Free Rapid Lysis of Blood Cells in a Microfluidic Device Utilizing Ion Concentration Polarization, Applied Sciences, 15.15, (2025), 8127 .
9. S. J. Lee, Y. Park, S. H. Lee, S. H. Park, I. T. Kim, Y. Kim, B. S. Soh, G. H. Kim, J. Lee*, S. Lee*, K. Shin*, Y. S. Park*, Sacrificial Template-Derived CoMo-LDH Gas Diffusion Electrode for Anion Exchange Membrane Water Electrolysis, Advanced Science, (2025), (Online published)
10. J. S. Ha, S. H. Lee, S. J. Lee, I. T. Kim, S. H. Park, W. J. Lee, K. Kim, G. H. Kim, J. Lee, Y. Kim*, S. M. Choi*, Y. S. Park*, Enhanced Hydrogen Evolution Reaction Kinetics by Sulfur Incorporation in Transition Metal‑Based Oxyhydroxide Electrodes, Korean Journal of Chemical Engineering, (2025), (Online published)
2024
1. H.Park, G.H.Kim*, Fabrication of simple bio-friendly hydrophobic coatings via protein denaturation and etching by NaCl. Journal of Industrial Science and Technology Institute, 38.2 (2024) 41-45.
2. T. Kim, S. M. Kang, K. Kim*, G. H. Kim*, Fabrication of Oil-Absorbing Porous Sponges via 3D Electrospinning of Recycled Expanded Polystyrene with Functional Additive, Polymers, 16.23 (2024), 3322
3. J. H. Lee†, N. K. Kim†, T. Kim, M. J. Choi, S. M. Kang, J. Cho, H. Son, K. Kim*, G. H. Kim*, Design of Compact Multiple-test Machine for Evaluation of Electrical and Mechanical Properties of Flexible Thin Electrode. Journal of Korean Society of Manufacturing Process Engineers, 23.2 (2024) 95-102.
4. J. H. Lee, M. J. Choi, S. M. Kang, H. I. Eum, G. H. Kim*, Structural Color Formation of ZnO Nanorods Using Gold as a Seed and Reflective Layer. ACS Applied Nano Materials, 7.8 (2024) 8655-8660.
5. D. Im, B. Kim, G. H. Kim*, T. An, Effect of Adhesion Strength Between Flexible Substrates and Electrodes on the Durability of Electrodes. Journal of Sensor Science and Technology, 33.2 (2024) 86-92.
6. S. M. Kang, K. Kim, S. Kim, D. G. Lee, T. An, G. H. Kim*, Synthesis of Hierarchical Superhydrophilic/Superhydrophobic Nanostructured Surfaces for Oil/Water Separation. Advanced Materials Interfaces, 11.9 (2024): 2300627.
7. C. Y. Yi, F. Li, J. P. P. Thedja, S. H. Sim, Y. K. Choi, G. H. Kim, M. K. Kim, A Comparison Study of Edge Line Estimation Algorithms for Dimensional Quality Assessment of Precast Concrete Slabs. Advances in Civil Engineering, 2024.1 (2024) 4166203.
2023
1. N. K. Kim, K. Kim, H. Jang, T. An, H. J. Shin*, G. H. Kim*, Microheater with copper nanofiber network via electrospinning and electroless deposition. Scientific Reports, 13.1 (2023) 22248.
2. N. K. Kim, S. E. Kim, D. Im, S. M. Hong, T. An, G. H. Kim*, Fabrication of Transparent Electrode based on Metallic Nanofiber Network via Combined Heat Treatment. Journal of Korean Society for Precision Engineering, 40.10 (2023) 813-819.
3. T. Kim, M. G. Song, K. Kim, H. Jeon, G. H. Kim*, Recyclable Superhydrophobic Surface Prepared via Electrospinning and Electrospraying Using Waste Polyethylene Terephthalate for Self-Cleaning Applications, Polymers, 15.18 (2023) 3810.
4. G. H. Kim, J. Kim, J. Yesuraj, N. K. Kim, T. An, K. Kim, Electrostatic spray catalytic particle coating on carbon electrode for enhancing electrochemical reaction. International Journal of Hydrogen Energy, 48.42 (2023) 15796-15808.
5. K. Y. Song, G. H. Kim, J. shin, A hybrid manufacturing process for a microgripper using selective laser melting 3D printing and wire EDM. Journal of Mechanical Science and Technology, 37.4 (2023): 1931-1937.
6. Y. S. Park, J. H. Shin, I. Lee, T. An, G. H. Kim*, Effect of Plasma Treatment Conditions of PDMS Substrate on Copper Electroless Plating Process. Journal of Korean Society of Manufacturing Process Engineers, 22.2 (2023) 110-115.
7. J.S.Hwang, G.H.Kim*, Syringe Pump 3D Modeling for Precise Control of VCM. Journal of Industrial Science and Technology Institute, 37.1 (2023) 17-22.
2022
1. K. S. Woo, G. H. Kim*, The Influence of FFF Layer Printing Time On the Shape Errors. Journal of Industrial Science and Technology Institute, 36.2 (2022) 1-7.
2. D. Im, G. H. Kim*, T. An*, Fabrication of a Porous Carbon Surface Using Ethanol Vapor Treatment. Journal of Sensor Science and Technology, 31 (2022) 244-248.
3. G. H. Kim, H.Y. Hwang, T. An, In Situ BSA (Bovine Serum Albumin) Assisted Electroless Plating Method with Superior Adhesion Property. Advanced Materials Interfaces, 9.2 (2022) 2101203. (This paper was selected as the Front cover)
2021
1. H. Woo, S. Kim, S. Yoon, K. Kim, G. H. Kim*, T. An*, G. Lim*, Highly flexible and transparent film heater with electrospun copper conductive network via junction-free structure. Journal of Alloys and Compounds, 886 (2021) 161191.
2. H. Woo, S. Kim, H. Nam, W. Choi, K. Shin, K. Kim, S. Yoon, G. H. Kim*, J. Kim*, G. Lim*, Au hierarchical nanostructure-based surface modification of microelectrodes for improved neural signal recording. Analytical Chemistry, 93.34 (2021) 11765-11774.
3. H. S. Oh† , C. H. Lee† , N. K. Kim† , T. An, G. H. Kim*, Sensors for biosignal/health monitoring in electronic skin. Polymers, 13.15 (2021) 2478.
4. H. Woo, S. Kim, S. Yoon, T. An, G. H. Kim*, G. Lim*, Pt Nanostructure Deposition on Microelectrodes for Improved Electrochemical Characteristics, Transactions of the Korean Society of Mechanical Engineers - B, 45.5 (2021) 281-287.
5. K. Kim, K. Park, H. Nam, G. H. Kim, S. K. Hong, S. Kim, H. Woo, S. Yoon, J. H. Kim, G. Lim, Fabrication of oblique submicron-scale structures using synchrotron hard X-ray lithography, Polymers, 13.7 (2021) 1045.
2020
1. H. Woo, G. H. Kim, S. Kim, T. An, G. Lim, Fabrication of UV Sensor Based on ZnO Hierarchical Nanostructure Using Two-step Hydrothermal Growth, Journal of Sensor Science and Technology, 29.3 (2020) 187-193.
2. G. H. Kim†, H. Woo†, S. Kim, T. An, G. Lim*, Highly-robust, solution-processed flexible transparent electrodes with a junction-free electrospun nanofiber network, RSC Advances, 10.17 (2020) 9940-9948. († equally contributed) (This paper was selected as the Supplementary cover)
~2019
1. S. Kim†, G. H. Kim†, H. Woo, T. An, G. Lim*, Fabrication of a Novel Nanofluidic Device Featuring ZnO Nanochannels, ACS Omega, 5.7 (2019) 3144-3150. († equally contributed) (This paper was selected as the Supplementary cover)
2. G. H. Kim, T. An*, G. Lim*, Bioinspired Structural Colors Fabricated with ZnO Quasi-Ordered Nanostructures, ACS Appl. Mater. Interfaces. 9 (2017) 19057–19062. (This paper was selected as the Front cover)
3. G. H. Kim, K. Kim, H. Nam, K. Shin, W. Choi, J.H. Shin, G. Lim*, CNT-Au nanocomposite deposition on gold microelectrodes for improved neural recordings, Sens. Actuators B Chem. 252 (2017) 152–158.
4. G. H. Kim, H. Nam, W. Choi, T. An, G. Lim*, Electrospinning Nanofiber on an Insulating Surface with a Patterned Functional Electrolyte Electrode, Adv. Mater. Interfaces. 5 (2018) 1701204.
5. G. H. Kim, T. An, G. Lim*, Fabrication of Optical Switching Patterns with Structural Colored Microfibers, Nanoscale Res. Lett. 13 (2018) 204.
6. G. H. Kim, J.H. Shin, T. An, G. Lim*, Junction-free Flat Copper Nanofiber Network-based Transparent Heater with High Transparency, High Conductivity, and High Temperature, Sci. Rep. 8 (2018) 13581.
7. G. H. Kim, K. Kim, E. Lee, T. An, W. Choi, G. Lim, J. Shin, G.H. Kim, K. Kim, E. Lee, T. An, W. Choi, G. Lim, J.H. Shin*, Recent Progress on Microelectrodes in Neural Interfaces, Materials. 11 (2018) 1995.
8. G. H. Kim, J. H. Shin, T. An, I. Kim, G. Lim*, Dispensing small droplets with low generating power. Sensors and Materials 27, 43 (2015).
9. G. H. Kim, H. Woo, G. Lim, T. An*, Development of optical strain sensor with nanostructures on a Poly-dimethylsiloxane (PDMS) substrate, Journal of Sensor Science and Technology (2018)
10. W. Choi, G.H. Kim, J.H. Shin, G. Lim, T. An, Electrospinning onto Insulating Substrates by Controlling Surface Wettability and Humidity, Nanoscale Res. Lett. 12 (2017) 610.
11. J. H. Shin, G. H. Kim, I. Kim, H. Jeon, T. An, G. Lim, Ionic liquid flow along the carbon nanotube with DC electric field, Sci. Rep. 5 (2015) 11799.
12. I. Kim, G.H. Kim, C.S. Kim, H.J. Cha, G. Lim, Optical Detection of Paraoxon Using Single-Walled Carbon Nanotube Films with Attached Organophosphorus Hydrolase-Expressed Escherichia coli, Sensors. 15 (2015) 12513–12525.
13. J. H. Shin, G. H. Kim, I. Kim, Lim, H., Lim, G., Carbon-Nanotube-Modified Glass Micropipette for Simultaneous Drug Injection and Neural Monitoring. Journal of Sensor Science and Technology 22, 309 (2013).
14. J. Sung, J.Y. Kim, S. Seok, H.J. Kwon, M. Kim, G. H. Kim, G. Lim, A gyroscope fabrication method for high sensitivity and robustness to fabrication tolerances, J. Micromechanics Microengineering. 24 (2014) 075013.
출원
20. 김건휘, 임재원, 김나경, “하이드로겔 기반 바이오 디바이스의 적층제조장치”, 출원일: 2025.08.22, 출원번호: 10-2025-0117186
19. 김건휘, 임재원, 김나경, “감온변색안료를 활용한 키토산 하이드로겔 기반 무전력 온도센서”, 출원일: 2025. 08.01, 출원번호: 10-2025-0105585
18. 김건휘, 한석희, 김나경, “모듈형 회전수집기를 이용한 방적사구조 나노섬유 생산용 전기방사장치”, 출원일: 2025. 08.01, 출원번호: 10-2025-0105626
17. 김건휘, 최문정, 김나경, 강승민, “텅스텐 합금(W-Ni-P) 전해도금을 활용한 무납(Lead-Free) 방사선 차폐 소재의 제작”, 출원일: 2024.11.27, 출원번호: 10-2024-0172151 (가출원)
16. 김건휘, 최문정, “전기 방사 기반 금속 보조 화학 에칭을 통해 반원형으로 에칭된 실리콘 구조체를 제작하는 방법”, 출원일: 2024-10.15, 출원번호: 10-2024-0139983
15. 김건휘, 최문정, “전기 방사된 나노 섬유를 마스크로 이용하여 선택적으로 식각된 실리콘 피라미드 구조를 제작하는 방법”, 출원일: 2024-10.15, 출원번호: 10-2024-0139982
14. 김건휘, 이지홍, 김나경, 김태균, 최문정, 강승민, "박막의 기계적 특성을 측정하기 위한 복합시험장치 및 이를 이용한 시험방법", 대한민국, 출원일: 2024.-06-11, 출원번호: 10-2024-0075857
13. 김건휘, 이지홍, 조성채, "수동 잠금 해제 기능을 포함하는 주차 브레이크 장치 및 그것을 포함한 자동차", 대한민국, 출원일: 2024-04-30, 출원번호: 10-2024-0057575
12. 김건휘, 이지홍, 조성채, "수동 잠금 해제 기능을 포함하는 주차 브레이크 장치 및 그것을 포함한 자동차", 대한민국, 출원일: 2024-04-30, 출원번호: 10-2024-0057606
11. 김건휘, 김나경, 최문정, 강승민, "무납 재료를 포함하는 방사선 차폐 소재", 대한민국, 출원일: 2024-04-22, 출원번호: 10-2024-0053271
10. 김건휘, 최문정, "독립적으로 성장된 산화구리 및 산화아연 복합 나노파이버의 제조 방법", 대한민국, 출원일: 2024-04-22, 출원번호: 10-2024-0053172
9. 김건휘, 김태균, 송만규, "PET를 이용한 초소수성 필름 제작 방법", 대한민국, 출원일: 2023-04-12, 출원번호: 10-2023-0048067
8. 김건휘, 안태창, 김나경, 박완수, "전기방사법으로 제작된 나노섬유 웹의 접합점을 융합하는 방법 및 이것이 적용된 전기소자 제조방법", 대한민국, 출원일: 2022-12-08, 출원번호: 10-2022-0170182
7. 김건휘, 안태창, 김기범, 김진선, "전기분무 방식을 이용한 촉매전극 제조방법", 대한민국, 출원일: 2022-12-08, 출원번호: 10-2022-0170196
6. 김건휘, 안태창, 이동규, "초소수성 구리 표면의 제작방법, 및 이에 의해 제작된 초소수성 표면구조를 가지는 구리 기재", 대한민국, 출원일: 2022-12-08, 출원번호: 10-2022-0170189
5. 김건휘, 박병관, 임민웅, 이주영, 김도원, 조진우 최진상, 조재형, 박성재, "스마트 시트", 대한민국, 출원일: 2022-11-25, 출원번호: 10-2022-0160075
4. 김건휘, 김현석, 박정훈, 백상현, 서수은, 성연준, 최지해, "시각장애인용 스마트 지팡이 및 이의 제어방법", 대한민국, 출원일: 2022-10-21, 출원번호: 10-2022-0136589
3. 임근배, 안태창, 김건휘, 우현수, "전기방사와 무전해도금을 이용한 금속 나노 섬유의 제조방법 및 이를 이용한 투명필름 발열체", 대한민국, 출원일: 2022-05-19, 출원번호: 10-2022-0061673
2. 임근배, 안태창, 김건휘, “구조색용 구조체의 제조 방법”, 대한민국, 출원일: 2017-11-10, 출원번호: 10-2017-0149670.
1. 임근배, 김강현, 김건휘, 신정활, 최우석, “미세 전극의 제조 방법”, 대한민국, 출원일: 2017-09-29, 출원번호: 10-2017-0128139.
등록
6. 김건휘, 강윤재, 공형한, 김기찬, 김재휘, 김환희, 팜홍도, "수동 휠체어의 주행보조장치", 대한민국, 등록일: 2025-05-12, 등록번호: 10-2807979
5. 신현준, 이현석, 김동현, 김태연, 이재백, 장한솔, 김건휘, 곽호재, “고온 발생을 위한 마이크로 히터 및 그의 제작 방법”, 대한민국, 등록일: 2025-02-18, 등록번호: 10-2771425
4. 김건휘, 안태창, 음현일, "ZnO 박막 제조방법, 및 이에 기반한 구조색 발현체의 제조방법", 대한민국, 등록일: 2024-09-11, 등록번호: 10-2707292
3. 김건휘, 신현준, 김나경, "마이크로 히터 제작을 위한 투명전극 제작 공정 방법", 대한민국, 등록일: 2024-05-07, 등록번호: 10-2627-3610000
2. 김건휘, 김나경, "재활용 가능한 태양광 패널 오염 방지용 필름 및 태양광 패널 오염 방지용 필름을 제조하는 방법", 대한민국, 등록일: 2024-01-16, 등록번호: 10-2627-3610000
1. 안태창, 김건휘, “전기방사에 의해 금속염을 포함하는 폴리머 용액으로부터의 금속나노섬유 제조방법”, 대한민국, 등록일: 2018.04.04, 등록번호: 10-1847477
기술이전
1. 김건휘, "사료 자동 급이 시스템 및 그 제어방법", 대한민국, 출원일: 2023.01.03, 출원번호: 10-2023-0000830
1. International Conferences
2025
1. Dae Hyeop Yoon, Mun Jeong Choi, Geon Hwee Kim*, “Flexible Conductive Electrode Based on Electrospun PVDF Nanofibers for Wearable Applications”, Europe-Korea Conference on Science and Technology (EKC), Vienna, Austria, 2025, 08
2024
1. Mun Jeong Choi, Siyoung Lee, Geon Hwee Kim*, "Angle-Dependent Structural Color-Based CuO/ZnO Nanopatterns with Deep Learning Authentication", MRS materials research society, 2024 MRS Fall Meeting & Exhibit, 2024, 12
2023
1. Taegyun Kim, Na Kyoung Kim, Geon Hwee Kim*, "Fabrication of Superhydrophobic Surfaces using Waste PET", Freeform Fabrication and University of Texas at Austin, The 34th Annual International Solid Freeform Fabrication Symposium, 2023, 08
2. So Eun Kim, Na Kyoung Kim, Taegyun Kim, Man Gyu Song, Taechang An, In Hwan Lee, Geon Hwee Kim*, "Manufacturing of Metal Electrode via Composite Heat Treatment Process", The Korean Society of Mechanical Engineers, The 9th International Conference on Manufacturing, Machine Design and Tribology, 2023, 03
2022
1. Hyun Il Eum, Geon Hwee Kim*, "Formation of ZnO Structural Color Using Low Temperature Solution Process", International Welding/Joining Conference, IWJC-KOREA, 2022, 10
~2019
1. Geon Hwee Kim, Taechang An, Geunbae Lim, “Fabrication of conducting micro/nano fibers with near field electrospinning and electroless deposition”, Nanotoday 2017, Hawaii, USA, 20171206-20171210.
2. Geon Hwee Kim, Taechang An, Geunbae Lim, “Fabrication of beetles spark inspired color-changing nanoparticles”, Nanotoday 2017, Hawaii, USA, 20171206-20171210.
3. Geon Hwee Kim, Taechang An, Geonbae Lim, “Fabrication of stretchable micro/nano core-shell fibers with near field electrospinning”, GCEAS 2017, Okinawa, Japan, 20170725-20170727.
4. Taechang An, Geon Hwee Kim, Geunbae Lim, “Fabrication of continuous metal nanofibers with electrospinning and electrolessde plating”, Graphene 2017, Barcelona, Spain, 20170328-20170331.
5. Geon Hwee Kim, Taechang An, Geonbae Lim, “Breath sensor fabricated with ZnO nanostructure”, Graphene 2017, Barcelona, Spain, 20170328-20170331.
6. Geon Hwee Kim, Taechang An, Geonbae Lim, “Structural Color of ZnO Nanostructures with Electrospun Seed Layer”, ELECTROSPIN 2016, Otranto, Italy, 20160628-20160701.
7. Geon Hwee Kim, Taechang An, Geunbae Lim, “Fabrication of Structural Color with Hierarchical ZnO Structure”, NANOPT 2016, Braga, Portugal, 20160216-20160219.
8. Geon Hwee Kim, Kanghyun Kim, Taechang An, Jung Hwal Shin, Geunbae Lim, “SWNT/Au Nano Particle Coating on MEA Electrode for Impedance Control”, NANOSMAT 2015, Manchester, UK, 20150913-20150916.
9. Jung Hwal Shin, Geon Hwee Kim, Intae Kim, Taechang An, Geunbae Lim, “Multifunctional carbon-nanotube nanoelectrodes”, International conference on biofabrication, Pohang, Korea, 20140928-20141001.
10. Geon Hwee Kim, Jung Hwal Shin, Taechang An, Intae Kim, Geonbae Lim, “Dispensing femto-atto droplets using nanowire”, APCOT 2014, Daegu, Korea, 20140629-20140702.
11. Jung Hwal Shin, Geon Hwee Kim, Intae Kim, Taechang An, Hee-Sup Shin, Geunbae Lim, “Drug injectable carbon-nanotube nanoelectrodes”, SFN 2013, Santiago, USA, 20131109-20131113.
2. Domestic Conferences (Korea)
2025
1. 임재원†, 김나경†, 남효영*, 김건휘*, “A 3D Printed Thermo-responsive Color-changing Chitosan Hydrogel Sensor", 대한 3D 프린팅 융합의료학회, 서울, 41, 2025, 05
2. 윤대협†, 최문정†, 김건휘*, "Fabrication of a Functional Membrane Based on Electrospun Nanofibers for UV Protection and Anti-Fogging Application", 한국기계가공학회, 여수, 279, 2025, 05
3. 박준수, 조진우, 유광열, 김건휘, 이인환*, “Analysis of Compressive Characteristics in TPU Structures Based on Geometric Configurations”, 한국기계가공학회, 여수, 240, 2025, 05
4. 차병권, 유광열, 김건휘, 이인환*, “A Study on Insole Durability Testing Device Using a Cam Mechanism”, 한국기계가공학회, 여수, 238, 2025, 05
2024
1. 김건휘*, 김나경, 임재원, “Fabrication of Powerless Temperature Sensor through Additive Manufacturing of Hydrogel”, 한국정밀공학회, 경주, 331-331, 2024, 11
2. 김나경, 백상현, 김건휘*, “Fabrication of Heating Device Based on Electrospun PVDF Nanofiber Web”, 대한기계학회, 제주, 2221-2221, 2024, 11
3. 최문정, 김나경, 김건휘*, “Synthesis of ZnO Nanostructure Based on Microheater for UV Sensor”, 대한기계학회, 제주, 2222-2222, 2024, 11
4. 최문정, 김건휘*, “Angle-dependent Structural Color-based CuO/ZnO Nanopatterns with Deep Learning Authentication”, 대한기계학회, 제주, 334-334, 2024, 11
5. 김나경, 강승민, 김건휘*, “Study of Plasma Treatment for Improving Adhesion of Additive Manufactured Circuits and Sensors”, 대한기계학회, 제주, 319-319, 2024, 11
6. 강승민, 김건휘*, "Fabrication and Utilization of Special Wetting Surfaces through Layered Nanostructure Synthesis", 대한기계학회, 부산, 47-47, 2024, 5
7. 김태균, 김건휘*, "Upcycling PET Waste for Eco-friendly Superhydrophobic Surfaces", 한국정밀공학회, 제주, 107-107, 2024, 5
2023
1. 최문정, 이지홍, 김나경, 김건휘*, "Fabrication of Independent Cu/ZnO Nanofiber Patterns Grown by Electroless Plating and Hydrothermal Synthesis", 한국기계가공학회, 제주, 372-373, 2023, 11
2. 강승민, 김건휘*, "Fabrication of Porous Hierarchical Membranes using Electroless Plating and Oxidation Processes", 한국기계가공학회, 제주, 374-374, 2023, 11.
3. 이지홍, 김건휘*, "Fabrication of Multi-tester for Analysis of Electro-Mechanical Characterization of Thin-film and Polymeric Materials", 한국기계가공학회, 제주, 181-181, 2023, 11.
4. 김태균, 김건휘*, "Fabrication of Superhydrophobic Surfaces based on Waste PET using Electrospinning and Electrospraying", 한국기계가공학회, 제주, 185-185, 2023. 11.
5. 김나경, 김건휘*, "Fabrication of Copper Network Based Micro-heater using Electrospinning and Electroless Plating", 한국기계가공학회, 제주, 227-227, 2023, 11.
6. 김태균, 김나경, 이지홍, 강승민, 최문정, 김건휘*, "Fabrication of Recyclable Superhydrophobic Surfaces from Waste PET for Self-cleaning Application", 한국정밀공학회, 삼척, 265-265, 2023, 11.
7. 강승민, 이동규, 김나경, 홍승미, 오동천, 김건휘*, "Development of Superhydrophobic Filter Fabrication Technology through Electroplating and Solution Process", 한국정밀공학회, 제주, 618-618, 2023, 05.
8. 이지홍, 음현일, 최문정, 김태균, 김건휘*, "Development of Solution Process for Manufacturing ZnO Structural Color", 한국정밀공학회, 제주, 619-619, 2023, 05.
9. 김건휘, 김나경 "Direct Metallization Process of Additive Manufactured TPU Printout", 한국정밀공학회, 제주, 801-801, 2023, 05.
2022
1. 김소은, 안태창, 김건휘*, "Fabrication of Metallic Nanofiber Network via Composite Heat Treatment Process", 한국기계가공학회, 제주, 208-208, 2022, 12.
2. 김나경, 김건휘*, "Development of Solution Process for Manufacturing Micro-transparent Heater", 한국기계가공학회, 제주, 207-207, 2022, 12.
3. 임도연, 김건휘, 안태창, "Carbon based Humidity Sensor Using Candle Soot", 대한기계학회, 제주, 2560-2561, 2022, 11.
4. 임도연, 김건휘, 안태창, "Micro Nano Multiscale Superhydrophobic Structure based on Candle Soot", 대한기계학회, 제주, 2509-2510, 2022, 11.
5. 우현수, 김수현, 윤승빈, 김건휘, 임근배*, "Fabrication of Double-layer Conductive Nanofiber Networks using Electroless Plating and Electrochemical Deposition", 대한기계학회, 제주, 2520-2520, 2022, 11.
6. 김나경, 김건휘*, "Fabrication of junction-free PVP nanofiber network via humidification process", 한국기계가공학회, 여수, 196-196, 2022, 04.
2021
1. 김건휘, 김나경, 안태창*, “Manufacturing of nozzle moving electrospinning device using arduino”, 한국센서학회, 강릉, 60, 2021, 10.
2. 김건휘, 이충현, 오현석, 김나경, 안태창*, 우현수, 임근배*, “Fabrication of Flexible Transparent Film Heater using Junction-free Cu Nanofiber Deposition”, 한국정밀공학회, 온라인, 508, 2021, 05.
~2019
1. 서가영, 김나영, 김승모, 우현수, 최정우, 김건휘, 임근배*, “Easy Fabrication of PDMS Lens using Hydrophobic Film and Water Droplet Mold”, 한국군사기술학회, 제주도, 20180614-20180615.
2. 김건휘, 안태창, 임근배*, “Fabrication of humidity sensor with electrospun ZnO nanostructure”, 대한기계학회, 정선, 20161214-20161216.
3. 김건휘, 안태창, 임근배*, “One-step fabrication of random/aligned electrospun nanofiber on an insulating surface”, 한국센서학회, 대구, 20161111-20161111.
4. 김건휘, 안태창, 임근배*, “Commercial pen assisted ion adsorbing layer for electrode fabrication”, 한국센서학회, 대구, 20161111-20161111.
5. 김건휘, 김강현, 남효영, 신금재, 최우석, 신정활, 임근배*, “CNT-Au nanocomposite deposition on gold microelectrodes for improved neural recordings”, 대한기계학회, 제주도, 20151110-20151114.
6. 김건휘, 신정활, 김인태, 전형국, 안태창, 임근배*, “Ionic liquid flow and dispensing along the carbon nanobundle”, 한국 MEMS 학술대회, 제주도, 20150402-20150404.