How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-07 · 6 min read · Independent comparison
• GEEKRIA's biggest strength: a leatherette-and-memory-foam cushion set sized specifically for JBL JR300/JR300BT, T450BT, T500BT, Tune 500/500BT/510BT/520BT — plus a video guide and a one-year manufacturer warranty.
• GEEKRIA's biggest trade-off: leatherette is the material you choose for easy wiping and a tidy look, not for the breathable feel of fabric, and the pads are only confirmed for that JBL list (plus Caeden Linea N°10) unless you measure your own cups.
• Miruchertter's biggest strength: soft velvet over high-density memory foam, cut for Beyerdynamic DT770/DT770 Pro/DT880/DT880 Pro/DT990/DT900 Pro, with a one-year manufacturer warranty.
• Miruchertter's biggest trade-off: velvet is a lint-and-dust magnet compared with faux leather, and the design is aimed at over-ear Beyerdynamic models — it is not a universal pad.
• Who each is for: GEEKRIA for JBL on-ear and Tune owners; Miruchertter for Beyerdynamic DT-series owners.
GEEKRIA's set is a straight swap for worn-out cushions on a long list of JBL headphones: JR300, JR300BT, T450BT, T500BT, Tune 500, Tune 500BT, Tune 510BT and Tune 520BT. The pads are built from memory foam wrapped in leatherette, black, sold as a two-count set, and each one measures about 2.68 x 2.68 x 0.71 inches. In other words, this is a small, flat-ish on-ear cushion — which is exactly what those JBL models use. The package also includes a video guide, which matters more than it sounds: pulling old pads and seating new ones cleanly is the step most people get wrong, and a visual walkthrough removes the guesswork.
Who should skip it? If you own Beyerdynamic DT-series headphones, this is not your part — the fit list simply doesn't include them. And if you specifically want a fabric or velvet touch against your ears, leatherette is the wrong material; it runs warmer over long sessions. Finally, remember this is a pad set only: no headphones, no cable, no case.
Miruchertter DT880: Who It's For
Miruchertter's set is the counterpart for the Beyerdynamic crowd. It's compatible with DT770, DT770 Pro, DT880, DT880 Pro, DT990 and DT900 Pro, and it's sold in gray. The construction is soft velvet over high-density memory foam — a combination chosen for long wearing sessions, where the velvet surface stays gentle against the ear and the foam holds its shape instead of collapsing after a few weeks. The brand also claims the cushion helps block outside sound and preserve the headphone's original tuning, which is the whole point of replacing pads rather than buying new headphones: you're restoring the seal that age and compression destroyed.
Installation is pitched as quick — a few minutes, no tools mentioned — and the brand backs the pads with a one-year manufacturer warranty. If you've ever fought a stubborn pad ring on an over-ear headphone, "a few minutes" is the number you want to hear.
Who should buy it? Beyerdynamic owners with flattened, flaking or shiny pads, especially anyone who wears their DT880 or DT990 for hours at a time. Velvet is the more breathable of the two materials here, and for indoor listening, mixing or long desk sessions, that comfort advantage is real. Gray is a neutral choice that won't clash with the headphone frame.
Who should skip it? If your headphones aren't on that Beyerdynamic list, look elsewhere — this pad isn't marketed as universal, and forcing it onto a different cup size is how you end up with a poor seal and thin sound. And if you want something you can wipe down after sweaty use, velvet is the harder material to keep clean; dust and lint cling to it, and it needs more careful upkeep.
Side-by-Side: Which Should You Choose?
• Best for Beyerdynamic DT770 / DT880 / DT990 / DT900 Pro owners → Miruchertter DT880. Same logic, opposite brand.
• Best for easy cleaning and sweat-heavy use → GEEKRIA. Faux leather wipes clean; velvet doesn't.
• Best for long, breathable indoor listening → Miruchertter. Soft velvet over high-density memory foam is the comfort-first build.
• Best for a first-timer doing the swap alone → GEEKRIA. The included video guide is a genuine help for a fiddly job.
• Best for a fast, tool-free install → Miruchertter. The brand describes the process as a few minutes.
• Best for matching an existing black headphone → GEEKRIA. The pads are black.
• Best for matching a gray Beyerdynamic finish → Miruchertter. The pads are gray.
• Both → a one-year manufacturer warranty. Coverage is comparable, so warranty shouldn't be the deciding factor.
In my opinion, the right buy comes down to one question: which headphones do you actually own? If it's a JBL JR300, T450BT or any Tune 500/510/520 model — and especially if that pair does double duty for cycling — I'd take the GEEKRIA set. Leatherette is the more practical surface when sweat and road grime are in the picture, and the fit list matches without guesswork. If you own a Beyerdynamic DT770, DT880, DT990 or DT900 Pro, the Miruchertter DT880 is the correct answer and the comfort of velvet is a real upgrade for long listening. Don't cross-shop them. Match the pad to the headphone, check the current price on Amazon, and you're done.
No. GEEKRIA is sized for JBL JR300/JR300BT, T450BT, T500BT and Tune 500/500BT/510BT/520BT (plus Caeden Linea N°10), while Miruchertter is cut for Beyerdynamic DT770/DT770 Pro/DT880/DT880 Pro/DT990/DT900 Pro. Buy the one that lists your model.
GEEKRIA, in my opinion. The leatherette surface is easier to wipe down after sweat and dirt, and it won't trap lint the way velvet does. Velvet is the comfier choice for long indoor sessions instead.
No. Both listings are replacement ear cushions only — the headphone itself, cables and cases are not included.
Both brands cover their pads with a one-year manufacturer warranty, and GEEKRIA explicitly invites you to contact them if you mismatched your headphone type or the fit failed. Always measure your existing cups before ordering, since neither pad is truly universal.
• MAONO XLR Podcast Equipment vs P PUPGSIS Studio Monitor Headphones+XLR
• our Antetek 5.0 vs YUFFUN A8 pick
• Anivia Gaming Headset Noise vs Coby Sweat-Resistant True
• SONTINH OpenAir2 vs iMangoo Earbuds Headphones 3.5mm
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.