We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-03 · 7 min read · Independent comparison
If you want a straightforward, no-fuss replacement for a family of popular JBL on-ear and wireless headphones with a fit that's easy to match, choose GEEKRIA Leatherette Replacement Ear; if you need to revive a pair of classic Sony studio monitors with a thicker, mesh-covered cushion and a tool included to help you swap them, choose Hmoke Replacement Ear Pads.
• GEEKRIA's biggest strength: a broad compatibility list covering many JBL models (JR300, JR300BT, T450BT, T500BT, and several Tune variants) plus a memory foam and leatherette build.
• GEEKRIA's biggest trade-off: it's a leatherette pad, so it's aimed at the JBL-style fit rather than the specific Sony studio-monitor profile, and you'll want to check your headphone dimensions before ordering.
• Hmoke's biggest strength: it's built specifically for Sony MDR-7506, MDR-V6, MDR-V7, and MDR-CD900ST, with a thick high-density slow-rebound memory foam and a plastic install tool in the box.
• Hmoke's biggest trade-off: it's narrowly targeted at those Sony models, so it's the wrong pick if your headphones are JBL.
• Who GEEKRIA is for: JBL owners who want a simple, well-documented pad swap.
• Who Hmoke is for: anyone nursing a pair of classic Sony studio monitors back to life.
GEEKRIA's replacement pad is a set of two ear cushions made with memory foam and leatherette, in black. The headline feature is compatibility: the pad is listed for JBL JR300, JR300BT, T450BT, T500BT, Tune 500, Tune 500BT, Tune 510BT, and Tune 520BT headphones, and it also names the Caeden Linea N°10. That's a wide net across a lot of the JBL on-ear and budget wireless line, which is exactly where pads tend to wear out first.
The build is what you'd expect from a leatherette pad: a faux-leather cover over memory foam. Leatherette wipes clean easily, which matters if you wear these on commutes or in the gym, and it doesn't soak up sweat the way fabric can. The pad measures roughly 2.68 x 2.68 x 0.71 inches and weighs about 9 grams, so it's a light, low-profile cushion rather than a bulky one. If your goal is to make an old pair of JBLs look and feel new again without changing the headphone's silhouette, that thin profile is a plus.
Who should buy it? If you own one of the listed JBL models and your current pads are flaking, cracked, or flattened, this is a direct, purpose-built replacement. GEEKRIA also backs the pad with a one-year manufacturer warranty and a note that if you matched the wrong headphone type or the pads didn't fit, you can reach out — a small but genuinely useful bit of reassurance for a part people often buy by guesswork.
Hmoke Replacement Ear Pads: Who It's For
Hmoke's pad takes the opposite approach: it's narrow and specific. It's designed for Sony MDR-7506, MDR-V6, MDR-V7, and MDR-CD900ST headphones — the classic studio-monitor family that a lot of people keep for years. The brand is upfront that you should confirm your headphone model before buying, and that's the right instinct here, because this pad is built around that Sony profile rather than a broad range.
The material story is different from GEEKRIA's. Hmoke uses high-density slow-rebound memory foam wrapped in a soft protein leather with a mesh fabric character, described as "extra thick." Slow-rebound foam is the type that compresses gradually and then eases back to shape, which is why it's often chosen for long listening sessions — the pad is meant to mold to your ear rather than press on it. The extra thickness is also a deliberate design choice for studio monitors, where a deeper cushion can change how the headphone sits around your ear.
Hmoke also leans into the practical side of the swap. The pads are described as the same size as the originals so they fit the headphone properly, and the kit includes a plastic tool to help you pry off the old pads and seat the new ones. That's a real convenience, because removing worn pads on a studio headphone is the fiddly part of the job, and not everyone has a plastic spudger lying around. The brand says the whole thing takes just a few minutes with no special tools beyond what's included, and offers a 24-hour response window if you have questions or issues.
Who should buy it? If you own one of the listed Sony models and want to keep using a headphone you already like, this is the targeted route — and the included tool lowers the barrier to doing it yourself. Who should skip it? Anyone with JBLs, or any headphone outside that Sony list. Because it's model-specific, it's not a "might fit" purchase; it's a "confirm your model" purchase.
Side-by-Side: Which Should You Choose?
• Best for classic Sony studio monitors → Hmoke Replacement Ear Pads, designed for MDR-7506, MDR-V6, MDR-V7, and MDR-CD900ST.
• Best if you want an install tool included → Hmoke, which ships with a plastic tool for removing and fitting pads.
• Best if you prefer a wipe-clean leatherette cover → GEEKRIA, made with leatherette over memory foam.
• Best if you want a thicker, slow-rebound cushion → Hmoke, which uses high-density slow-rebound memory foam and an extra-thick build.
• Best if you want a longer warranty window → GEEKRIA, which lists a one-year manufacturer warranty.
• Best if you value fit support after buying → Hmoke, which offers a stated 24-hour response for questions or issues.
• Best if you're unsure of your model → neither, honestly — confirm your exact headphone model first, since these two pads target different headphone families.
In my opinion, the deciding factor here isn't quality — it's your headphone. If you own a JBL from the list, I'd buy the GEEKRIA pad: it's purpose-built for that family, easy to keep clean, and backed by a one-year manufacturer warranty. If you own a Sony MDR-7506, MDR-V6, MDR-V7, or MDR-CD900ST, I'd buy the Hmoke pad instead — the slow-rebound foam, the extra thickness, and the included install tool make it the more thoughtful kit for that specific job. Match the pad to the headphone and you'll be happy with either.
Will the GEEKRIA pads fit my JBL Tune 510BT?
Yes — the Tune 510BT is on the compatibility list, along with the JR300, JR300BT, T450BT, T500BT, Tune 500, Tune 500BT, and Tune 520BT. Just confirm your exact model before ordering.
Hmoke designs these specifically for the Sony MDR-7506, MDR-V6, MDR-V7, and MDR-CD900ST. If your headphones aren't one of those, this isn't the right pad — check the model number on your headband first.
Hmoke includes a plastic tool to help you remove the old pads and fit the new ones, and describes the job as a few minutes' work. GEEKRIA doesn't list an install tool, so you'd handle the swap yourself.
Leatherette (GEEKRIA) is easy to wipe clean and resists absorbing sweat; the mesh-style fabric cover on the Hmoke pad is paired with thick slow-rebound foam for a softer, deeper cushion. Pick based on which feel you prefer on your ears for long sessions.
Prices change, so I don't quote them here — use the "Check latest price on Amazon" button on this page to see the current price for whichever pad matches your headphones.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: tozo vs anker earbuds, Bewinner Over-Ear Headphones vs JoySpark Headphones, Smilebridge True vs AILZPXX Headphones USB C, Generic Open Ear Headphones vs Aurotlu Open Ear Headphones