• steel wire reinforced lpg hose

• 5 years warranty , isi quality

• orange color , 1.5 meter long

• Very good quality

• Steel wire rainforced

• Strong Grip

• Fire resistance

• For queries, please call our customer care 1800-123-334411 on all days from 8AM - 8PM

• suitable for liquefied petroleum gas media, gas/oil resistant synthetic rubber inner tube, single braid steel wire/textile yarn reinforcement

• Color : Multi color

Product details

Size: 1.5 mtrs

Item part number: 9680

ASIN: B07JKYRGMH

Date first available at Amazon.in: 20 October 2018

3 Meter LPG Rubber Gas Pipe

Olrada Steel wire reinforced, abrasion, ozone and weather resistant. Strong grip and extra 2 clamps for extra safety. Steel Wire Reinforced, Abrasion, Ozone and Weather Resistant , Rats can't bite through steel wire, feel safe, steel wire reinforced, abrasion, ozone and weather resistant. Available in all Sizes: 1.5 Meter, 2 Meter, 3 Meter, 4 Meter, 5 Meter, 8 Meter, 10 Meter.

2 clamps for extra safety

Olrada Steel wire reinforced, abrasion, ozone and weather resistant. Strong grip and extra 2 clamps for extra safety.

Leak proof hose wire

Material: Rubber and Color: Orange, Leak proof hose wire.

Rats can't bite

Rats can't bite through steel wire, feel safe, steel wire reinforced, abrasion, ozone and weather resistant.

Care Instructions

Care Instructions: Do not use any lubricant to insert hose on nozzle.

Gas Discharge Tubes - The Basics

Prior to Roentgen’s discovery of x-rays in 1895, many different types of gas discharge tubes were already in use (e.g., Geissler, Crookes, Hittorf, Lenard tubes). After the discovery, new types were developed that were specially designed to produce x-rays. Today, gas discharge x-ray tubes are commonly referred to as “cold cathode” tubes in order to distinguish them from “hot cathode” Coolidge x-ray tubes that employ a heated filament. But at the time they were being manufactured, they were simply known as x-ray tubes.

What these different tubes had in common was the fact that they were made of glass and were partially evacuated. Depending on the type of tube, the residual gas might or might not be air. Tubes designed for x-ray work usually contained air, although some (e.g., Snook tube) employed helium or hydrogen. Looks here best review Payeer Litecoin

The configuration of these tubes varied, but there were always at least two electrodes (an anode and a cathode) that might, or might not, be located at opposite ends of tube. It was not unusual for x-ray tubes to have three electrodes: a negatively charged cathode, a positively charged anode, and what was known as an "anticathode." The latter (aka auxiliary anode) was usually given a positive charge, but it sometimes had no electrical charge at all. Tubes with both an anode and anticathode were often referred to as bi-anode tubes.

When a sufficient electric potential (high voltage) is applied across the tube's electrodes, a stream of electrons (aka cathode rays) travels through the gas from the cathode to the target. If the tube had an anticathode, it was the target. If the tube had no anticathode, the anode almost always served as the target. When the electrons struck the target, x-rays were emitted. The greater the current (on the order of a milliamp) supplied by the operator to the tube, the greater the intensity of the emitted x-rays. The higher the applied voltage, the higher the energy of the x-rays, and the more penetrating they became. For diagnostic imaging, more penetrating x-rays were preferred. For therapy, less penetrating x-rays were desired.

Several problems had to be overcome when designing the tubes. Perhaps the most important were an overheating of the target when the tube was under heavy use, short and long-term variability in the gas pressure, reversals in the direction of the current through the tube(inverse discharges), and electrical discharges that might puncture the glass wall of the tube.

Reviews

It’s a good product for under five hundred. Needed a change of pipe due to long distance from slab hole to place of gas stove in new house. It’s of 3M as stated.

The clamps provided too are of good quality and secures the push fits well, but may need half yearly check to ensure the metal doesn’t harm the pipe per se, specially at the Stove end.

Good Buy.