Firmware Update For Omnia 23

The Turris Omnia is an open-source router from CZ.NIC, the .CZ domain registry. Stock firmware Turris OS is based on top of the latest OpenWrt version and features Foris with assistants to aid in basic configuration and Turris OS related settings and Luci for advanced configuration together with automatic updates and distributed firewall. It features a dual-core CPU - Marvell Armada 385, 1 or 2 GB RAM, 8 GB flash, 6 Gbit ports, SFP connector, 2x USB 3.0, 2 mini PCIe slots with 2.4GHz and 5Ghz Wi-Fi cards and 1 mini PCie together with mSATA interface, and much more.

Download the latest Turris OS for Turris Omnia from repo (see above). Save the file omnia-medkit-latest.tar.gz to USB flash to the root directory and put the USB flash to the front panel USB connector of the Turris Omnia router. The Turris Omnia router supports following filesystems: ext2/3/4, Btrfs, XFS and FAT. The Turris Omnia router has a reset button on its back panel. To enter re-flash mode press the reset button and wait for LEDs to indicate the number of the desired mode. Release the reset button when 4 LEDs light up. The Turris Omnia router will write the system image from the USB flash to the internal eMMC storage. During the course of the operation all LEDs are going to turn green. After a while the LEDs turn red. From this moment on the router must not be restarted or powered off. When the reflash operation is completed the router automatically restarts. Completion of the flashing process is indicated by turning all LEDs green for a moment during the boot. After that the LEDs transition to the standard operation indicator mode. When the process has completed you may remove the USB flash.

Download File

U-Boot 2015.10-rc2 (Aug 18 2016 - 20:43:35 +0200), Build: jenkins-omnia-master-23SoC: MV88F6820-A0 Watchdog enabledI2C: readySPI: readyDRAM: 2 GiB (ECC not enabled)Enabling Armada 385 watchdog.Disabling MCU startup watchdog.Regdomain set to **MMC: mv_sdh: 0SF: Detected S25FL164K with page size 256 Bytes, erase size 64 KiB, total 8 MiB*** Warning - bad CRC, using default environmentPCI: 00:01.0 - 168c:002e - Network controllerPCI: 01:00.0 - 11ab:6820 - Memory controller 01:01.0 - 168c:003c - Network controllerModel: Marvell Armada 385 GPBoard: Turris Omnia SN: 0000000C00007933Regdomain set to **SCSI: MVEBU SATA INITSATA link 0 timeout.SATA link 1 timeout.AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA modeflags: 64bit ncq led only pmp fbss pio slum part sxsNet: neta2Hit any key to stop autoboot: 0Setting bus to 1BOOT eMMC FSBtrFS init: Max node or leaf size 40962828952 bytes read in 479 ms (5.6 MiB/s)BtrFS init: Max node or leaf size 409617306 bytes read in 171 ms (98.6 KiB/s)Kernel image @ 0x1000000 [ 0x000000 - 0x2b2a98 ]## Flattened Device Tree blob at 02000000 Booting using the fdt blob at 0x2000000 Loading Device Tree to 0fff8000, end 0ffff399 ... OKStarting kernel ...[ 0.000000] Booting Linux on physical CPU 0x0[ 0.000000] Initializing cgroup subsys cpuset[ 0.000000] Initializing cgroup subsys cpu[ 0.000000] Initializing cgroup subsys cpuacct[ 0.000000] Linux version 4.4.211-a890a5a94ebb621f8f1720c24d12fef1-0 (beast@build) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r47055) ) #1 SMP Fri Jan 24 10:10:37 CET 2020[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache[ 0.000000] Machine model: Turris Omnia[ 0.000000] Memory policy: Data cache writealloc[ 0.000000] PERCPU: Embedded 11 pages/cpu @eedca000 s13888 r8192 d22976 u45056[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522560[ 0.000000] Kernel command line: earlyprintk console=ttyS0,115200 rootfstype=btrfs rootdelay=2 root=b301 rootflags=subvol=@,commit=5 rw cfg80211.freg=**[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[ 0.000000] Memory: 2069744K/2097152K available (5797K kernel code, 195K rwdata, 1468K rodata, 284K init, 196K bss, 27408K reserved, 0K cma-reserved, 1310720K highmem)[ 0.000000] Virtual kernel memory layout:[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)[ 0.000000] .text : 0xc0008000 - 0xc072082c (7267 kB)[ 0.000000] .init : 0xc0721000 - 0xc0768000 ( 284 kB)[ 0.000000] .data : 0xc0768000 - 0xc0798d44 ( 196 kB)[ 0.000000] .bss : 0xc0798d44 - 0xc07ca0fc ( 197 kB)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1[ 0.000000] Hierarchical RCU implementation.[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2[ 0.000000] NR_IRQS:16 nr_irqs:16 16[ 0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9[ 0.000000] L2C-310 D prefetch enabled, offset 1 lines[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled[ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB[ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001[ 0.000000] Switching to timer-based delay loop, resolution 40ns[ 0.000003] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns[ 0.000010] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns[ 0.000103] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)[ 0.000110] pid_max: default: 32768 minimum: 301[ 0.000149] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)[ 0.000154] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)[ 0.000409] Initializing cgroup subsys io[ 0.000418] Initializing cgroup subsys memory[ 0.000429] Initializing cgroup subsys devices[ 0.000435] Initializing cgroup subsys freezer[ 0.000440] Initializing cgroup subsys net_cls[ 0.000446] Initializing cgroup subsys pids[ 0.000464] CPU: Testing write buffer coherency: ok[ 0.000579] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000[ 0.000606] Setting up static identity map for 0x8280 - 0x82d8[ 0.000687] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4[ 0.000769] mvebu-pmsu: Initializing Power Management Service Unit[ 0.001214] Booting CPU 1[ 0.001389] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001[ 0.001418] Brought up 2 CPUs[ 0.001424] SMP: Total of 2 processors activated (100.00 BogoMIPS).[ 0.001427] CPU: All CPU(s) started in SVC mode.[ 0.003397] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4[ 0.003472] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns[ 0.003482] futex hash table entries: 512 (order: 3, 32768 bytes)[ 0.003559] xor: measuring software checksum speed[ 0.099902] arm4regs : 2773.600 MB/sec[ 0.199902] 8regs : 1859.600 MB/sec[ 0.299901] 32regs : 1664.000 MB/sec[ 0.399899] neon : 1812.000 MB/sec[ 0.399903] xor: using function: arm4regs (2773.600 MB/sec)[ 0.399917] pinctrl core: initialized pinctrl subsystem[ 0.400353] NET: Registered protocol family 16[ 0.400888] DMA: preallocated 256 KiB pool for atomic coherent allocations[ 0.431417] cpuidle: using governor ladder[ 0.434096] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling[ 0.434105] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling[ 0.629929] raid6: int32x1 gen() 196 MB/s[ 0.799984] raid6: int32x1 xor() 225 MB/s[ 0.970087] raid6: int32x2 gen() 298 MB/s[ 1.139986] raid6: int32x2 xor() 242 MB/s[ 1.310069] raid6: int32x4 gen() 313 MB/s[ 1.479955] raid6: int32x4 xor() 256 MB/s[ 1.649928] raid6: int32x8 gen() 365 MB/s[ 1.819904] raid6: int32x8 xor() 228 MB/s[ 1.989930] raid6: neonx1 gen() 1121 MB/s[ 2.159901] raid6: neonx1 xor() 896 MB/s[ 2.329931] raid6: neonx2 gen() 1279 MB/s[ 2.499908] raid6: neonx2 xor() 1144 MB/s[ 2.669927] raid6: neonx4 gen() 1393 MB/s[ 2.839915] raid6: neonx4 xor() 1175 MB/s[ 3.009899] raid6: neonx8 gen() 981 MB/s[ 3.179902] raid6: neonx8 xor() 903 MB/s[ 3.179905] raid6: using algorithm neonx4 gen() 1393 MB/s[ 3.179908] raid6: .... xor() 1175 MB/s, rmw enabled[ 3.179911] raid6: using intx1 recovery algorithm[ 3.180215] SCSI subsystem initialized[ 3.180454] usbcore: registered new interface driver usbfs[ 3.180483] usbcore: registered new interface driver hub[ 3.180509] usbcore: registered new device driver usb[ 3.181043] clocksource: Switched to clocksource armada_370_xp_clocksource[ 3.181525] NET: Registered protocol family 2[ 3.181787] TCP established hash table entries: 8192 (order: 3, 32768 bytes)[ 3.181830] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)[ 3.181891] TCP: Hash tables configured (established 8192 bind 8192)[ 3.181928] UDP hash table entries: 512 (order: 2, 16384 bytes)[ 3.181953] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)[ 3.182053] NET: Registered protocol family 1[ 3.185899] squashfs: version 4.0 (2009/01/31) Phillip Lougher[ 3.185911] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.[ 3.186558] bounce: pool size: 64 pages[ 3.186639] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)[ 3.186650] io scheduler noop registered[ 3.186657] io scheduler deadline registered (default)[ 3.187047] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver[ 3.187384] irq: Cannot allocate irq_descs @ IRQ48, assuming pre-allocated[ 3.187528] irq: Cannot allocate irq_descs @ IRQ80, assuming pre-allocated[ 3.187844] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00[ 3.187854] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff][ 3.187860] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff][ 3.187865] pci_bus 0000:00: root bus resource [bus 00-ff][ 3.188156] PCI: bus0: Fast back to back transfers disabled[ 3.188163] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring[ 3.188169] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring[ 3.188175] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring[ 3.188429] PCI: bus1: Fast back to back transfers disabled[ 3.188685] PCI: bus2: Fast back to back transfers disabled[ 3.188738] PCI: bus3: Fast back to back transfers enabled[ 3.188800] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff][ 3.188806] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0200000-0xe04fffff][ 3.188813] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit][ 3.188824] pci 0000:00:01.0: PCI bridge to [bus 01][ 3.188831] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff][ 3.188839] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0200000-0xe03fffff 64bit][ 3.188850] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0400000-0xe040ffff pref][ 3.188854] pci 0000:00:02.0: PCI bridge to [bus 02][ 3.188860] pci 0000:00:02.0: bridge window [mem 0xe0200000-0xe04fffff][ 3.188865] pci 0000:00:03.0: PCI bridge to [bus 03][ 3.188977] mv_xor f1060800.xor: Marvell shared XOR driver[ 3.221529] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )[ 3.221628] mv_xor f1060900.xor: Marvell shared XOR driver[ 3.261505] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )[ 3.261668] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled[ 3.262657] console [ttyS0] disabled[ 3.282725] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 15625000) is a 16550A[ 4.141182] console [ttyS0] enabled[ 4.164976] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 23, base_baud = 15625000) is a 16550A[ 4.177578] brd: module loaded[ 4.181113] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode[ 4.190185] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs[ 4.199665] scsi host0: ahci-mvebu[ 4.203272] scsi host1: ahci-mvebu[ 4.206783] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 44[ 4.214731] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 44[ 4.223347] m25p80 spi0.0: s25fl164k (8192 Kbytes)[ 4.228209] 2 ofpart partitions found on MTD device spi0.0[ 4.233723] Creating 2 MTD partitions on "spi0.0":[ 4.238526] 0x000000000000-0x000000100000 : "U-Boot"[ 4.243830] 0x000000100000-0x000000800000 : "Rescue system"[ 4.250233] libphy: Fixed MDIO Bus: probed[ 4.254569] libphy: orion_mdio_bus: probed[ 4.259785] mvneta f1030000.ethernet eth0: Using hardware mac address d8:58:d7:00:99:5a[ 4.268576] mvneta f1034000.ethernet eth1: Using hardware mac address d8:58:d7:00:99:5b[ 4.277408] mvneta f1070000.ethernet eth2: Using hardware mac address d8:58:d7:00:99:5c[ 4.285494] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 4.292043] ehci-pci: EHCI PCI platform driver[ 4.296531] ehci-platform: EHCI generic platform driver[ 4.301865] ehci-orion: EHCI orion driver[ 4.305962] orion-ehci f1058000.usb: EHCI Host Controller[ 4.311392] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1[ 4.319039] orion-ehci f1058000.usb: irq 39, io mem 0xf1058000[ 4.341048] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00[ 4.347247] hub 1-0:1.0: USB hub found[ 4.351017] hub 1-0:1.0: 1 port detected[ 4.355141] usbcore: registered new interface driver usb-storage[ 4.361337] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0[ 4.571046] ata1: SATA link down (SStatus 0 SControl 300)[ 4.576488] ata2: SATA link down (SStatus 0 SControl 300)[ 4.871158] i2c /dev entries driver[ 4.875393] at24 1-0054: 8192 byte 24c64 EEPROM, writable, 1 bytes/write[ 4.882165] i2c i2c-0: Added multiplexed i2c bus 1[ 4.887031] i2c i2c-0: Added multiplexed i2c bus 2[ 4.891898] i2c i2c-0: Added multiplexed i2c bus 3[ 4.896760] i2c i2c-0: Added multiplexed i2c bus 4[ 4.901625] i2c i2c-0: Added multiplexed i2c bus 5[ 4.906492] i2c i2c-0: Added multiplexed i2c bus 6[ 4.911363] i2c i2c-0: Added multiplexed i2c bus 7[ 4.918189] i2c i2c-0: Added multiplexed i2c bus 8[ 4.923001] pca954x 0-0070: registered 8 multiplexed busses for I2C mux pca9547[ 4.930585] orion_wdt: Initial timeout 171 sec[ 4.935180] cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19[ 4.943417] sdhci: Secure Digital Host Controller Interface driver[ 4.949610] sdhci: Copyright(c) Pierre Ossman[ 4.954121] sdhci-pxav3 f10d8000.sdhci: No vmmc regulator found[ 4.960054] sdhci-pxav3 f10d8000.sdhci: No vqmmc regulator found[ 5.011043] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA[ 5.018488] sdhci-pltfm: SDHCI platform and OF driver helper[ 5.033757] NET: Registered protocol family 10[ 5.038661] NET: Registered protocol family 17[ 5.043148] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.[ 5.055588] mmc0: new high speed MMC card at address 0001[ 5.061120] mmcblk0: mmc0:0001 008G30 7.28 GiB[ 5.061205] mmcblk0boot0: mmc0:0001 008G30 partition 1 4.00 MiB[ 5.061286] mmcblk0boot1: mmc0:0001 008G30 partition 2 4.00 MiB[ 5.061372] mmcblk0rpmb: mmc0:0001 008G30 partition 3 4.00 MiB[ 5.062592] mmcblk0: p1[ 5.085997] Bridge firewalling registered[ 5.090016] 8021q: 802.1Q VLAN Support v1.8[ 5.094288] Registering SWP/SWPB emulation handler[ 5.099259] registered taskstats version 1[ 5.103616] BTRFS: using crc32c-generic for crc32c[ 5.109157] Btrfs loaded, integrity-checker=on[ 5.114302] mvsw61xx 10.mvsw61xx: Found MV88E6176 at f1072004.mdio-mii:10[ 5.121115] mvsw61xx 10.mvsw61xx: Using indirect addressing[ 5.196862] armada38x-rtc f10a3800.rtc: setting system clock to 2020-01-29 08:11:43 UTC (1580285503)[ 5.206823] Waiting 2 sec before mounting root device...[ 7.224227] BTRFS: device fsid 866c640e-3dd0-4a36-9bf8-2c791f00bf02 devid 1 transid 9 /dev/root[ 7.234320] BTRFS info (device mmcblk0p1): disk space caching is enabled[ 7.241045] BTRFS: has skinny extents[ 7.249386] BTRFS: detected SSD devices, enabling SSD mode[ 7.291057] VFS: Mounted root (btrfs filesystem) on device 0:13.[ 7.297183] Freeing unused kernel memory: 284K[ 7.351121] init: Console is alive[ 7.354598] init: - watchdog -[ 7.761882] exFAT: Version 1.2.9[ 7.783029] JFS: nTxBlock = 8192, nTxLock = 65536[ 7.856171] SGI XFS with security attributes, no debug enabled[ 7.863319] usbcore: registered new interface driver uas[ 7.870123] uhci_hcd: USB Universal Host Controller Interface driver[ 7.880142] xhci-hcd f10f0000.usb3: xHCI Host Controller[ 7.885494] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2[ 7.893092] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010[ 7.901662] xhci-hcd f10f0000.usb3: irq 46, io mem 0xf10f0000[ 7.907689] hub 2-0:1.0: USB hub found[ 7.911469] hub 2-0:1.0: 1 port detected[ 7.915500] xhci-hcd f10f0000.usb3: xHCI Host Controller[ 7.920828] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3[ 7.928406] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.[ 7.936719] hub 3-0:1.0: USB hub found[ 7.940488] hub 3-0:1.0: 1 port detected[ 7.944568] xhci-hcd f10f8000.usb3: xHCI Host Controller[ 7.949899] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4[ 7.957499] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010[ 7.966063] xhci-hcd f10f8000.usb3: irq 47, io mem 0xf10f8000[ 7.972038] hub 4-0:1.0: USB hub found[ 7.975807] hub 4-0:1.0: 1 port detected[ 7.979824] xhci-hcd f10f8000.usb3: xHCI Host Controller[ 7.985158] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5[ 7.992694] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.[ 8.000999] hub 5-0:1.0: USB hub found[ 8.004788] hub 5-0:1.0: 1 port detected[ 8.291042] usb 4-1: new high-speed USB device number 2 using xhci-hcd[ 8.357918] init: - preinit -Press the [f] key and hit [enter] to enter failsafe modePress the [1], [2], [3] or [4] key and hit [enter] to select the debug level[ 8.493484] random: procd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)[ 8.493513] usb-storage 4-1:1.0: USB Mass Storage device detected[ 8.493689] scsi host2: usb-storage 4-1:1.0[ 9.491631] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS[ 9.500622] sd 2:0:0:0: [sda] 1007616 512-byte logical blocks: (516 MB/492 MiB)[ 9.508078] sd 2:0:0:0: [sda] Write Protect is off[ 9.513001] sd 2:0:0:0: [sda] No Caching mode page found[ 9.518325] sd 2:0:0:0: [sda] Assuming drive cache: write through[ 9.525634] sda: sda1[ 9.528624] sd 2:0:0:0: [sda] Attached SCSI removable disk[ 11.412671] mount_root: mounting /dev/root[ 11.527550] BTRFS info (device mmcblk0p1): disk space caching is enabled[ 11.535512] mount_root: loading kmods from internal overlay[ 11.749120] block: attempting to load /etc/config/fstab[ 11.755584] block: unable to load configuration (fstab: Entry not found)[ 11.762352] block: no usable configuration[ 11.768866] procd: - early -[ 11.771794] procd: - watchdog -[ 11.883026] random: jshn: uninitialized urandom read (4 bytes read, 43 bits of entropy available)Failed to connect to ubus[ 11.913372] random: jshn: uninitialized urandom read (4 bytes read, 43 bits of entropy available)Failed to connect to ubus[ 11.951791] random: jshn: uninitialized urandom read (4 bytes read, 43 bits of entropy available)[ 11.978104] random: jshn: uninitialized urandom read (4 bytes read, 43 bits of entropy available)[ 12.016703] random: jshn: uninitialized urandom read (4 bytes read, 43 bits of entropy available)[ 12.042884] random: jshn: uninitialized urandom read (4 bytes re