The MOT assesses if your vehicle meets the minimum safety, legal, and environmental standards set out by the Driver And Vehicle Standards Agency (DVSA) at the time of the test. An MOT test can help to prevent accidents by identifying and fixing any problems with your car. An MOT test can help to keep you and your passengers safe on the road. An MOT test is a small investment that can make a big difference. Let's have a deep dive into the world of MOT testing and look at the things that MOT's check.
Internal things such as advisors, mirrors, and lights are checked. The handbrake is checked that the ratchet is working correctly and there's no wear and tear and the handbrake is securely fitted to the vehicle. Hazard lights, side lights, horns, and windscreen wipers are checked and made sure that the wipers work correctly and don't affect the field of vision. Relative movement between the steering wheel column is checked for any indication of looseness.
Driver's seat is checked that they remain secure in several positions and seat adjustments must incorporate an automatic locking system. Any defect in the driver's seat with regards to the passenger's seat is looked upon. Brake pedals are checked to make sure that it's not worn smooth and also the other pedals to make sure that they're secure. The plane of the steering column is checked by turning the steering wheel.
Hazard lights are checked with and without the engine on. Lenses and lamps are checked upon that they're fitted correctly and attached and not likely to be detached to make sure that they're operating correctly. Seatbelts are checked if they are securely fitted. And the strength and continuity of load is significantly reduced. The body condition is checked, the tray spoilers and mirror housings.
The car is checked for any unsafe modification and that they are not damaged, corroded, or any signs of injury. The passenger compartment is checked that they do not permit any exhaust fumes which is dangerous for people on board in vehicles. The boot lid, tailgate, loading door is looked for so that they are secured and in the closed position.
Suspension parts are checked that they are securely attached. With the help of an assistant for rock steering in both directions, the security of steering gear and components connected to the steering is checked. Engine mountains and mountain on the gear box is checked and ensured that there is no excessive wear or the mountings or brackets are not worn.
The bearing housing for the transmission shaft is checked for any damage or fracture to the housing. The metal brakes and fuel pipes are looked upon for excessive corrosion or any damage to the pipes. Exhaust System is checked for major leaks or any insecurity. The vehicle is looked upon for any corrosion or severe damage to the rigidity of the vehicle. With finger and thumb the extent of corrosion is assessed.
Handbrake cables are checked if they are working correctly. The rear wheel, rear flexible brake hoses, bushes, metal brake pipes, shock absorber, and subframes are checked for corrosions. Metal fuel pipes and tanks are checked for leaks. The structural integrity of the vehicle is checked and is looked upon for corrosion or severe damage to the rigidity of the vehicle. Brakes and fuel pipes are checked to ensure that they are securely attached.
The steering is allowed to centralize and then the brakes are checked for binding. Gradually the brake is applied and the braking efforts of each wheel watched upon. The service brake is pressed until maximum effort is anchored or the wheel locks and slips on the rollers. The reading of the maximum braking effort achieved is recorded where the brake lockup occurs. The process is repeated for each wheel and made sure that there is no excessive brake effort fluctuation. Gradually the brake is released and the braking effort of each wheel reduction is observed. The handbrake is planted individually with the button pressed until the lockup occurs or maximum efforts are achieved. The results are recorded and electrical handbrake checks are subject to the manufacturer's individual testing procedure.
In this article, we have a deep insight into how an MOT Bicester test is done and what are the things checked. Stay informed about legal requirements and frequency of MOT testing to keep your vehicle roadworthy. To ensure that the vehicle meets certain government and environmental standards, many tests are conducted to evaluate the components of the vehicle and check whether they are eligible to function on the road. And if the vehicle qualifies for the test without any issue and damage, the owner is handed with the pass MOT certificate.