This technique uses a hoist (mobile or ceiling hoist) and a sling. If a mobile (floor) hoist is used, it must be suitable for lifting clients from the floor.
1. Move the hoist into position – it is best to bring the hoist in from the client’s head end. If this is not possible, come from the feet end. The client’s feet and legs will have to be lifted over the hoist legs so the sling bar can be positioned above the client’s chest
2. Lower the boom to its lowest position so it is easy to attach the sling
3. Attach the sling
4. The client’s bed should be brought to the area
5. Hoist the client from the floor and position them on the bed
6. Remove the sling by tucking as much as possible of the sling underneath the client on one side and either sliding it out from the other side or rolling client away from it.
1. Apply the sling to the client
2. Move the hoist into position
3. Lower the sling bar and attach the sling
4. Hoist the client from the floor
5. Move hoist to transfer client over bed
6. Lower client to bed