Conferences
Referred Conference Proceedings:
2021
105. V.K. Jain, K Theenathyalan, J. R. Jegaraj, M. Ravi Sankar “ Material Removal Rate and Tool Life studies while machining of Fused Silica Ceramic Radome using Diamond Tip Brazed Tool” , 8th International & 29th National AIMTDR-2021,December 9-11,PSG College of Coimbatore, Tamil Nadu, India.
104. B. Srinivas, M. M. Basha and M. Ravi Sankar, "Experimental Study on Chemical Polishing of Laser Powder Bed Fusion Based INCONEL 718 Features". 8th International and 29th AIMTDR conference, 2021, December 9 - 11, PSG College of Technology, Coimbatore, Tamil Nadu, India.
103. Jaspreet Singh, Shanmuka Srinivas M, M Mahaboob Basha, and M. Ravi Sankar, "Tribological Study of Additively Manufactured Polymers for Simple to Complex Features: A critical review", 2nd Virtual International Tribology Research Symposium (ITRS2021), December 8 - 10, 2021.
102. Sai Teja B, Shanmuka Srinivas M, Surya Ganesh V, Venkata Kedara Krishna P, M. Ravi Sankar, “Experimental investigation and modelling on the end milling of wire arc additive manufactured feature”, 2nd Virtual International Tribology Research Symposium (ITRS2021), December 8 - 10, 2021.
101. Shyam, M. S. Srinivas, K. K. Gajrani, A. Udayakumar, and M. Ravi Sankar, "Sustainable Machining of Cf/SiC Ceramic Matrix Composite using Green Cutting Fluids" 28th CIRP Conference on Life Cycle Engineering, March 10-12, 2021, Jaipur, India, Procedia CIRP: Vol. 98, pp.151-158
100. Manoj Aluri, Monami Bhuyan, Swarup Raj Banik, and M. Ravi Sankar, "Review on particle emissions during fused deposition modeling of acrylonitrile butadiene styrene and polylactic acid polymers" 11th ICMPC, 15-17 Dec 2020, IIT Indore, Materials Today: Proceedings, DOI: 10.1016/j.matpr.2020.11.521
2020
99. Basha M M, Basha S M and M. Ravi Sankar, "State of Art on Development of Diamond Reinforced Tungsten Carbide based Cutting Tool by Powder Metallurgy Routes", Advances in Materials and Processing Technologies, 1-12, DOI: 10.1080/2374068X.2020.1860595
98. Purushothaman, S. and M. Ravi Sankar, "State of the art on atomistic modelling of laser polishing", 11th ICMPC, 15-17 Dec 2020, IIT Indore, Materials Today: Proceedings, DOI: 10.1016/j.matpr.2020.10.612
97. Singh, S., Matta, S.B. and M. Ravi Sankar, "Surface Morphology and Metallurgical Studies on Gas-Assisted Laser Beam Hybrid Micromachined Steel", In Industry 4.0 and Advanced Manufacturing (pp. 213-224), October 2020, Springer, Singapore, DOI: 10.1007/978-981-15-5689-0_19
96. Manoj, Aluri, Monami Bhuyan, Swarup Raj Banik, M. Ravi Sankar, "3D Printing of Nasopharyngeal Swabs for COVID-19 Diagnose: Past and Current Trends", 11th ICMPC, 15-17 Dec 2020, IIT Indore, Materials Today: Proceedings, DOI: 10.1016/j.matpr.2020.11.505
95. Basha, S. M., M. M. Basha, N. Venkaiah, M. Ravi Sankar, "A review on abrasive flow finishing of metal matrix composites", 11th ICMPC,15-17 Dec 2020, IIT Indore, Materials Today: Proceedings, DOI: 10.1016/j.matpr.2020.10.353
94. Manjunath, B. N., A. R. Vinod, K. Abhinav, S. K. Verma, M. Ravi Sankar, "Optimisation of process parameters for deposition of colmonoy using directed energy deposition process", 10th ICMPC, 21–23 February 2020 | GLA University Mathura, Materials Today: Proceedings DOI: 10.1016/j.matpr.2020.02.222
93. Manjunath, M. A., Prakash Vinod, N. Balashanmugam, M. Ravi Sankar, "Abrasive flow finishing for surface roughness improvement of aluminum propeller: A case study", 10th ICMPC, 21–23 February 2020 | GLA University Mathura, Materials Today: Proceedings,DOI: 10.1016/j.matpr.2020.02.223
92. Karthik, M. S., V. R. Raju, K. Niranjan Reddy, N. Balashanmugam, and M. Ravi Sankar, "Cutting parameters optimization for surface roughness during dry hard turning of EN 31 bearing steel using CBN insert", 10th ICMPC, 21–23 February 2020 | GLA University Mathura, Materials Today: Proceedings, March 2020, DOI: 10.1016/j.matpr.2020.02.224
91. Manoj, A., M. Ananda Rao, M. M. Basha, S. M. Basha, and M. Ravi Sankar, "State of art on wire feed additive manufacturing of Ti-6Al-4V alloy", 10th ICMPC, 21–23 February 2020 | GLA University Mathura, Materials Today: Proceedings, April 2020, DOI: 10.1016/j.matpr.2020.02.551
90. S.M. Basha, Monami Bhuyan, M.M. Basha, N. Venkaiah, M. Ravi Sankar, "Laser polishing of 3D printed metallic components: A review on surface integrity", 10th ICMPC, 21–23 February 2020 | GLA University Mathura, Materials today: proceedings, DOI: 10.1016/j.matpr.2020.02.443
89. S.M. Basha, M.M. Basha, G.V.P. Raj, N. Venkaiah, M. Ravi Sankar, "Past and current trends in electric discharge based machining of Silicon Carbide", 10th ICMPC, 21–23 February 2020 | GLA University Mathura, Materials today: proceedings, DOI: 10.1016/j.matpr.2019.12.135
88. M.M. Basha, S.M. Basha, B.K. Singh, N. Mandal, M. Ravi Sankar, "A review on synthesis of zirconia toughened alumina (ZTA) for cutting tool applications" 10th ICMPC, 21–23 February 2020 | GLA University Mathura, Materials today: proceedings, DOI: 10.1016/j.matpr.2019.12.134
2019
87. M. Ravi Sankar, Aluri Manoj, “Resorbable Polymers Based Carriers for Control Release Fertilizers”, National Conference on 3rd Agri NANO - Challenges and Opportunities in Agri nano technology (COAN--2019) June 13th-14th, 2019, Regional Agricultural Research Station, Tirupati, India.
86. Banik, S.R., Iqbal, I.M., Nath, R., Bora, L.J., Singh, B.K., Mandal, N. and M. Ravi Sankar, "State of the art on Zirconia Toughened Alumina Cutting Tools" Materials Today: Proceedings, 18, pp.2632-2641, November 2019, 10.1016/j.matpr.2019.07.123
85. Das, J., Banik, S.R., Reddy, S.R.S.K., M. Ravi Sankar, and Robi, P.S, "Review on process parameters effect on fatigue crack growth rate in friction stir welding", Materials Today: Proceedings, 18, pp.3061-3070, November 2019, 10.1016/j.matpr.2019.07.178
84. M. Ravi Sankar, Saxena, S, Banik, S.R, Iqbal, I.M, Nath, R, Bora, L.J. and Gajrani, K.K, "Experimental Study and Artificial Neural Network Modeling of Machining with Minimum Quantity Cutting Fluid", Materials Today: Proceedings, 18, pp.4921-4931, 26 November 2019, 10.1016/j.matpr.2019.07.484
83 .A. Bilal, A. Sarsen, M. Ravi Sankar, D. Talamona, A Perveen, "Effect of process parameters on overcut during assistive die sinking electro-discharge machining", 13th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, At Advanced Manufacturing Research Centre (AMRC)Sheffield; United Kingdom,
82. Sarsen, A., Bilal, A, M. Ravi Sankar, Talamona, D and Perveen, A, "Assistive Electro Discharge Machining of AIN Ceramics", In Materials Science Forum (Vol. 947, pp. 109-113), March 2019, Trans Tech Publications Ltd, 10.4028/www.scientific.net/MSF.947.109
2018
81. Kishor Kumar Gajrani, Y. Bishal Singha, M. Ravi Sankar, Uday S. Dixit, "Tribological performance of graphite, CaF2 and MoS2 coated mechanical micro-textured self-lubricating cutting tool material", VthInternational Conference on Production & Industrial Engineering (CPIE) 26-29 June, 2018, Urbana Santhron, Bangkok, Thailand.
80. M. Ravi Sankar, Vijay Kumar Jain, K.P. Rajukar, "Rheological and Nano-finishing Studies of Elastically Dominant Multiple Polymers Blend Abrasivve Flow Finishing Medium 19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2018, Bilbao, Spain.
79. Monami Bhuyan, Arnab Sarmah, Kishor Kumar Gajrani, Ashutosh Pandey, Tushar G. Thulkar, M. Ravi Sankar "State of Art on Minimum Quantity Lubrication in Grinding Process" 8thInternational Conference of Materials Processing and Characterization (ICMPC), 16-18 March, 2018, GRIET, Hyderabad, India. (Accepted)
78. Rasmi Ranjan Behera, Abhsar Hasan, Lalit Mohan Pandey, M. Ravi Sankar, "Laser Surface Bio-Coating of Functionally Graded TiO2-HAp on Textured Ti Alloy for Enhancing Bioactivity and Cell Profileration" 2018. (Accepted)
77. Swarup Banik, Navneet Kalita, Kishor Kumar Gajrani, Ramchandra Kumar, M. Ravi Sankar, "Recent Trends in Laser Assisted Machining of Ceramic Materials" 8th International Conference of Materials Processing and Characterization (ICMPC), 16-18 March, 2018, GRIET, Hyderabad, India, 2018. (Accepted)
76. Kishor Kumar Gajrani, M. Ravi Sankar, "Cutting Fluids Emissions in Mechanical Machining and its Adverse Effects on Biodiversity", 21st ADNAT Convention and International Symposium on Biodiversity and Biobanking (BIODIVERSE-2018), 27-29 January, IIT Guwahati, India, 2018.
75. Kishor Kumar Gajrani, Anupam Kumar, M. Ravi Sankar, "Fabrication of Biodegradable Magnesium Alloy (AZ 31) Thin Wall with Minimum Quantity Environmental Friendly Cutting Fluids", 21stADNAT Convention and International Symposium on Biodiversity and Biobanking (BIODIVERSE-2018), 27-29 January, IIT Guwahati, India, 2018.
74. M. Ravi Sankar, "Nano-finishing of Bio-Implants using Polymer Rheological Abrasive Complex Suspensions", 4th International Symposium on Advances in Sustainable Polymers (ASP-2018), 8-11 January, 2018, IIT Guwahati, India.
2017
73. Jayashree Das, P.S. Robi, M. Ravi Sankar, "Indentation Creep Behaviour of Nugget Zone of Friction Stir Welded 2014 Aluminum Alloy", International Conference on Recent Advances in Materials and Manufacturing Technologies, 28-29 November, 2017, Dubai, UAE.
72. M. Ravi Sankar, "Rheological and Nano-finishing Studies of Elastically Dominant Multiple Polymers Blend Based Abrasive Flow Finishing Medium", International Conference on Advances in Polymer Science and Technology (APA-2017), 23-25 November, 2017, New Delhi, India.
71. M. Ravi Sankar, "Nanofinishing of Bio-Implants using Polymer Rheological Abrasive Complex Suspensions", 6th Asian Biomaterials Congress (ABMC-2017), 25-27 October, 2017, Thiruvananthapuram, India.
70. S. Singh, M. Ravi Sankar, P. Rajan, R. Balasubramaniam, "Development and Rheological Study of the Polymer Blended Viscoelastic Medium for Finishing of Microholes", International Conference on Advanced Materials Research and Manufacturing Technologies (AMRTM-2017), 02-05 August, 2017, Phuket, Thailand. (Best Presenter Award to M. Ravi Sankar)
69. Abhishek Singh, N. Arul Manikandan, M. Ravi Sankar, K. Pakshirajan, L. Roy, "Development of Nozzle Feature on Copper Surface by Bio-Micromachining", ICMTC, 7-8 July, 2017, IIT Madras, India, 2017. (Best Paper Award)
68. Kishor Kumar Gajrani, Subrat Kumar Mallick, M. Ravi Sankar, "Comparative Studies on Mineral Oil, Eco Friendly Bio-Cutting Fluids Treatment and their Machining Performance", Proceedings of the National Conference on Sustainable Mechanical Engineering: Today and Beyond (SMETB), March 25-26, 2017, Tezpur University, Assam, India. (Best Paper Award)
67. M. Ravi Sankar, Kishor Kumar Gajrani, "Cutting Fluid Emissions and Eco-Friendly Cutting Fluid for Sustainable Machining", Proceedings of the National Conference on Sustainable Mechanical Engineering: Today and Beyond (SMETB), March 25-26, 2017, Tezpur University, Assam, India.
66. Abhishek Singh, N. Arul Manikandan, M. Ravi Sankar, K. Pakshirajan, L. Roy, "Experimental Investigation and Surface Morphology of Bio-Micromachining on Copper", 7th International Conference of Materials Processing and Charecterization (ICMPC), 17-19 March, 2017, GRIET Hyderabad, India, 2017 .
65. B.V. Ramanaiah, B. Manikanta, M. Ravi Sankar, Manisha Malhotra, Kishor Kumar Gajrani, "Experimental Study of Deflection and Surface Roughness in Thin Wall Machining of Aluminum Alloy", 7th International Conference of Materials Processing and Charecterization (ICMPC), 17-19 March, 2017, GRIET Hyderabad, India, 2017 .
2016
64. Ketema Bobe Bonsa, Woldetinsay Gutu Jiru, M. Ravi Sankar, Uday Shankar Dixit, "Experimental Investigations on Advanced Surface Finishing of Silicone Carbide Hard Ceramic Using Continuous Wave CO2Laser", IV International Conference on Production & Industrial Engineering (CPIE-2016), 19-21 December, 2016, NIT Jalandhar.
63. Kishor Kumar Gajrani, Dhanna Ram, M. Ravi Sankar, Uday Shankar Dixit, P. S. Suvin, Satish Vasu Kailash, "Machining of hardened AISI H-13 steel using minimum quantity indigenously developed eco-friendly cutting fluid", IV International Conference on Production & Industrial Engineering (CPIE-2016), 19-21 December, 2016, NIT Jalandhar.
62. Rasmi Ranjan Behera, Palaganti Madhu Babu, Mahesh Yogi, Kishor Kumar Gajrani, M. Ravi Sankar, "Fabrication of Micro-Channels on 304 Stainless Steel (SS-304) Using Nd:YAG Laser Beam Micro-Machining", IV International Conference on Production & Industrial Engineering (CPIE-2016), 19-21 December, 2016, NIT Jalandhar.
61. Rasmi Ranjan Behera, M. Ravi Sankar, "Laser Surface Cladding of Titania-Hydroxyapatite Functionally Graded Bio-coatings on Ti-6Al-4V Alloy", 6th International and 27th All India Manufacturing Technology, Design and Research (AIMTDR-2016), COE Pune, India.
60. M. Ravi Sankar, V.K. Jain, J. Ramkumar, Shivesh Kumar Sareen, S. Singh, "Nano finishing of Al alloy/SiC metal matrix composites using soft silicon based polymer Rheological abrasive medium", 6th International and 27th All India Manufacturing Technology Design and Research (AIMTDR) Conference, 16-18 December, 2016, COEP Pune, pp. 1528-1532, 2016.
59. Kishor Kumar Gajrani, M. Ravi Sankar, Divyansh Bhatnagar, M. Manohar, "Influence of mechanical micro-textured cutting tool on chip formation during machining of hardened AISI H-13 steel", 6th International and 27th All India Manufacturing Technology Design and Research (AIMTDR) Conference, 16-18 December, 2016, COEP Pune.
58. Kishor Kumar Gajrani, P. S. Suvin, Satish Vasu Kailash, M. Ravi Sankar, "Comparative studies on thermal, rheological behaviour of eco-friendly cutting fluids and their machining performance",6th International and 27th All India Manufacturing Technology Design and Research (AIMTDR) Conference, 16-18 December, 2016, COEP Pune.
57. Rasmi Ranjan Behera, Abshar Hasan, Sandeep Bhoi, M. Ravi Sankar, Lalit Mohan Pandey, "Osteoblast Interaction with Laser Coated HA and TiO2-HA Coatings on Ti-6Al-4V Alloy", National Conference on Emerging Biomaterials (NCEB-2016), Bharathiar university, Coimbatore, India
56. M. Ravi Sankar, D. Taye, M. Manohar, D. Sarkar, B. Basu, "Nano Finishing of HDPE/Al2O3/HAp Ternary Composite Based Acetabular Socket Using Polymer Rheological Abrasive Semisolid Medium",National Conference on Biomechanics and Rehabilitation Engineering (BIOREHAB-2016) 15-16 September, 2016, NEHU Shillong, India.
55. D. Kumar, S. Singh, M. Ravi Sankar, " Effect of Abrasive Particle Bluntness on Nano-finishing Using Abrasive Flow Finishing (AFF) Process", International Conference on Nanotechnology for Better Living (NBL-2016), 25-29 May, 2016, NIT Srinagar, India.
54. M. Ravi Sankar, D. Sarkar, B. Basu, "Nano-Finishing of HDPE/Al2O3/Hydroxyapatite Bio-Nano-Composite Based Acetabular Socket Using Polymer Rheological Abrasive Semisolid Medium", International Conference on Biomaterials, Biodiagnosis, Tissue Engineering, Drug Delivery and Regenerative Medicine (BITERM-2016) 15-17 April, 2016, IIT Delhi, India.
53. Shivesh Kumar Sareen, M. Ravi Sankar, "State of Art on Biodegradable Studies of Thermal Sensitive Injectable PEG/HAp for Orthopedic Applications", Recycle - 2016, International Conference on Waste Management, 1-2 April, 2016, IIT Guwahati.
52. Jayashree Das, M. Ravi Sankar, P.S. Robi, "State of Art on Conversion of Waste Printed Circuit Board (Electronic Waste) into Commercial Economic Composites", Recycle - 2016, International Conference on Waste Management, 1-2 April, 2016, IIT Guwahati.
51. Kishor Kumar Gajrani, Subrat Kumar Mallick, Praveen Verma,M. Ravi Sankar, "Bio-degradability and machining performance comparison of mineral oil and bio-cutting fluids", Recycle - 2016, International Conference on Waste Management, 1-2 April, 2016, IIT Guwahati.
50. Woldetinsay Gutu Jiru, M. Ravi Sankar, Uday Sanker Dixit, "Investigation of Microstructure and Microhardness in Laser Surface Alloyed Aluminum with TiO2 and SiC Powders", 5th International Conference of Materials Processing and Characterization (ICMPC), 12-13 March, 2016, GRIET Hyderadbad, Telangana, India.
49. Arbind Prasad, M. Ravi Sankar, Vimal Katiyar, "State of Art on Solvent Casting Particulate Leaching Method for Orthopedic Scaffolds Fabrication ", 5th International Conference of Materials Processing and Characterization (ICMPC), 12-13 March, 2016, GRIET Hyderadbad, Telangana, India.
48. Arbind Prasad, S.M. Bhasney, M. Ravi Sankar, Vimal Katiyar, "Fish Scale Derived Hydroxyapatite Reinforced Poly (Lactic acid) Polymeric Bio-films: Possibilities for Sealing/locking the Internal Fixation Devices", 5th International Conference of Materials Processing and Characterization (ICMPC), 12-13 March, 2016, GRIET Hyderadbad, Telangana, India.
47. Kishor Kumar Gajrani, M. Ravi Sankar, "State of the art on micro to nano textured cutting tools", 5th International Conference of Materials Processing and Characterization (ICMPC), 12-13 March, 2016, GRIET Hyderadbad, Telangana, India.
46. Kishor Kumar Gajrani, M. Ravi Sankar, "Past and current status of eco-friendly vegetable oil based metal cutting fluids", 5th International Conference of Materials Processing and Characterization (ICMPC), 12-13 March, 2016, GRIET Hyderadbad, Telangana, India.
2015
45. M. Ravi Sankar, S. K. Choudhury, "Experimental Study and Modelling of Machining with Dry Compressed Air, Flood and Minimum Quantity Cutting Fluid Cooling Techniques ", 15th CIRP Conference on Modelling of Machining Operations, 11-12 June 2015, Karlsruhe, Germany.
44. Arbind Prasad, B. Devendra, M. Ravi Sankar, "Micro-Scratch Based Tribological Characterization of Hydroxyapatite (HAp) Fabricated through Fish Scales"International Conference of Materials Processing and Characterization (ICMPC), Hyderabad.
43. Rasmi Ranjan Behera, M. Ravi Sankar, "State of the Art on Under Liquid Laser Beam Machining", International Conference of Materials Processing and Characterization (ICMPC), Hyderabad.
42. Sachin Singh, M. Ravi Sankar, "Design and Performance Evaluation of Abrasive Flow Finishing Process during Finishing of Stainless Steel Tubes ", International Conference of Materials Processing and Characterization (ICMPC), Hyderabad.
2014
41. Arnab Sarmah, Avik Bal, M. Ravi Sankar, S. Samanta and M. Chandrasekharan, "Experimental Study and Modeling of Micro Scratch Based Triboilogical Characterization of Al alloy/SiC Metal Matrix Composite", International Symposium on Aspects of Mechanical Engineering and Technology for Industry (AMETI-2014), NERIST, Itanagar, Arunachal pradesh, India.
40. Y. Chittara, A. Yadav, M. Ravi Sankar, Arbind Prasad, B. N Mondal, N Mondal, U. Batra, "Effect of Calcination Temperature on Quality of Hydroxyapatite that Fabricated from fish scales Biowastes", 23rd Processing and Fabrication of Advanced Materials(PFAM-XXIII), 5-7 December, 2014, IIT Roorkee (India), Pages 65-77.
39. Woldetinsay Jiru, M. Ravi Sankar and U. S. Dixit, "Surface Alloying of Aluminum with Copper using CO2 Laser", 5th International and 26th All India Manufacturing Technology, Design and Research (AIMTDR-2014), IIT Guwahati, Assam, India.
38. Rakesh Bhadra, Pankaj Biswas and M. Ravi Sankar,"A Literature Review on CO2 Laser Welding", 5th International and 26th All India Manufacturing Technology, Design and Research (AIMTDR-2014), IIT Guwahati, Assam, India.
37. Rakesh Bhadra, Pankaj Biswas and M. Ravi Sankar, "Effect of Process Parameters on Thermal History of Laser Welding of AISI-304 Stainless Steel", 5thInternational and 26th All India Manufacturing Technology, Design and Research (AIMTDR-2014), IIT Guwahati, Assam, India.
36. M. Ravi Sankar, T. K. Shakya, K. K. Gajrani, J. Swaminathan and U. S. Dixit, "Experimental Investigations on CO2 Laser Micro Texturing on Near Titanium Alloy (IMI 834)", 5thInternational and 26th All India Manufacturing Technology, Design and Research (AIMTDR-2014), IIT Guwahati, India.
35. R. R. Behera, M. Ravi Sankar, J. Swaminathan, A. K. Sharma and Alika Khare, "Experimental Comparative Study on Micromachining of 304 Stainless Steel in Air and Under Water using Pulsed Nd-YAG Laser Beam", 5th International and 26th All India Manufacturing Technology, Design and Research (AIMTDR-2014), IIT Guwahati, Assam, India.
34. Arbind Prasad, Dheeraj Gupta and M. Ravi Sankar and A. Narayana Reddy, "Experimental Investigations of Ni/La2O3 Composite Micro-Cladding on AISI 1040 Steel through Microwave Irradiation", 5th International and 26th All India Manufacturing Technology, Design and Research (AIMTDR-2014), IIT Guwahati, India.
33. Gajendra Mundel and M. Ravi Sankar, "Preparation and Tribological Characterization of Linear Low Density Polyethylene-Seashell base Bio-Composites", 5th International and 26th All India Manufacturing Technology, Design and Research (AIMTDR-2014), 2014, IIT Guwahati, Assam, India.
32. R. P. K. Reddy, K. K. Gajrani and M. Ravi Sankar, "Experimental comparative study of Conventional, Micro-Textured and Solid Lubricant Coated Micro-Textured Tools during Machining of AISI 1040 Alloy Steel", 5th International and 26th All India Manufacturing Technology, Design and Research (AIMTDR-2014), IIT Guwahati, Assam, India.
31. Sachin Singh, M. Ravi Sankar, V.K. Jain and J. Ramkumar, "Modeling of Finishing Forces and Surface Roughness in Abrasive Flow Finishing Process using Rheological Properties", 5thInternational and 26th All India Manufacturing Technology, Design and Research (AIMTDR-2014), IIT Guwahati, Assam, India.
30. R. Karthick, P. Sirisha and M. Ravi Sankar, "Tribomechanical and Surface Topographical Investigations of Poly Methyl Methacrylate-Seashell Particle Based Biocomposite", International Conference on Advances in Manufacturing and Materials Engineering, 2014, NIT Surathkal, Karnataka, India.
29. R. Karthick, P. Sirisha and M. Ravi Sankar, "Effect of Seashell Nanopowder on Mechanical and Tribological Properties of PMMA Biocomposite for Dental Application", 3rd International Conference on Materials Processing and Characterization, (ICMPC-2014), Hyderabad, Andhra Pradesh, India.
28. Kishor Kumar Gajrani, Sumit Shekhar and M. Ravi Sankar, "Experimental comparative study of Conventional, Micro-Textured and Coated Micro-Textured Tools in Machining", International Colloquium on Materials, Manufacturing and Metrology (ICMMM-2014), IIT Madras, Chennai, Tamilnadu, India.
2013
27. M. Ravi Sankar and S.K. Choudhury, "Experimental study and Modeling of Machining with Dry Compressed Air, Flood and Minimum Quantity Cutting Fluid Cooling Techniques", 14th CIRP Conference on Modeling of Machining Operations (CMMO-2013), Turin, Italy.
26. M. Ravi Sankar, K. Abhinay and P. Sirisha, "Experimental Investigations on Tribological Characteristics of Titanium Alloy based Biomaterial for Medical Applications", International Conference on Mechanical and Industrial Engineering (ICMIE-2013), Chennai, Tamilnadu, India.
25. D. Soren, P. Gupta, M. Ravi Sankar, S. P. Rajagopal, V. Ganesh and A. V. Lanjewar, "Tribomechanical and Tribochemical Wear of Human Dental Enamel", International Conference on Materials Processing Characterization (ICMPC-2013), Hyderabad, Andhra Pradesh, India.
24. S. P. Rajagopal, V. Ganesh, A.V. Lanjewar, M. Ravi Sankar, P. Gupta and D. Soren, "Past and Current Status of Hybrid Electric Discharge Machining (H-EDM) Processes", International Conference on Materials Processing Characterization (ICMPC-2013), Hyderabad, Andhra Pradesh, India.
23. V. K. Jain, V. Raghuram, K. K. Saren and M. Ravi Sankar, "Experimental Investigations on Forces in Magnetic Abrasive Nano-Finishing of Non-Magnetic Materials", International Conference on Magnetic Materials and Applications (MagMA-2013), IIT Guwahati, Assam, India.
22. Avinash Yadav, Prateek Gupta, N. Mondal, B.N. Mondal and M. Ravi Sankar, "Preparation and Characterization of Hydroxyapatite-TiO2 (HAp/TiO2) Bio-Nano Composite", 3rd International Conference on Nanomaterials and Nanotechnology (ICANN-2013), IIT Guwahati, Assam, India.
21. Sachin Singh and M. Ravi Sankar, "State of Art on Micro-Abrasive Flow Finishing (M-AFF) Process", National conference on Manufacturing: Vision for Future (MVF-2013), IIT Guwahati, Assam, India.
20. M. Ravi Sankar, "An Overview of Abrasive Based Advanced Nano-Finishing Processes", National Conference on Advances in Welding Technology, 2013, North Eastern Regional Institute of Science and Technology, Itanagar, Arunachal Pradesh, India.
19. M. Ravi Sankar, Tarun Kumar Shakya and Rasmi Ranjan Behera, "Experimental Study on CO2Laser Beam Micromachining of Silicon Carbide (SiC) Cylindrical Tube", International Conference on Precision Meso, Micro and Nano Engineering, (COPEN-2013), NIT Calicut, Kerala, India.
2012
18. M. Ravi Sankar, V.K. Jain and J. Ramkumar, "Nano finishing of Hard Cylindrical Steel Tubes using Rotational Abrasive Flow Finishing (R-AFF) Process", 4th International and 25th All India Manufacturing Technology, Design and Research (AIMTDR-2012), 2012, Jadavpur University, Kolkata, India.
2011
17. M. Ravi Sankar, V. K. Jain and J. Ramkumar, "Effect of Abrasive Medium Ingredients on Finishing of Al alloy and Al alloy/SiC Metal Matrix Composites using Rotational Abrasive Flow Finishing", 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT-2011), Singapore.
16. M. Ravi Sankar, J. Ramkumar and V. K. Jain, "Online Monitoring of Surface Roughness During Grinding of Metal Matrix Composites", XVII National Seminar on Aerospace Structures (NASAS), 2011, IIT Kanpur, Uttar Pradesh, India.
15. M. Ravi Sankar, J. Ramkumar and S. Aravindan, "Machining of Metal Matrix Composites with Minimum Quantity Cutting Fluid and Flood Cooling", International Conference on Materials and Manufacturing (ICMM-2011), 2011, Jinzhou, Liaoning, China.
2010
14. M. Ravi Sankar, "Economic and Eco-friendly Machining- A Boon for Machining Industry", International Conference of Environmental Health and Technology (EH&T 2010), 2010, IIT Kanpur, Uttar Pradesh, India.
13. M. Ravi Sankar, "Micromachining by Biological Micro-Organisms: An Overview", 25th National convention of Production Engineers and National Seminar on Recent developments in Manufacturing Technology, 2010, Agartala, Tripura, India.
12. M. Ravi Sankar, J. Ramkumar and S. K. Choudhury, "High Speed Hard Turning with Minimum Quantity Lubrication", 25th National convention of Production Engineers and National Seminar on Recent developments in Manufacturing Technology, 2010, Agartala, Tripura, India.
11. V. K. Jain, Vinod Kumar and M. Ravi Sankar, "Experimental Study and Empirical Modeling of Magnetic Abrasive Finishing on Ferromagnetic and Non-Ferromagnetic Materials", 3rd International and 24th All India Manufacturing Technology Design and Research Conference, 2010, Andhra University, Visakhapatnam, India.
10. M. Ravi Sankar, V. K. Jain and J. Ramkumar, "Dependence of AFF process on Rheological Characteristics of Soft Styrene Based Organic Polymer Abrasive Medium", 3rd International and 24th All India Manufacturing Technology Design and Research Conference, 2010, Andhra University, Visakhapatnam, India.
2009
9. M. Ravi Sankar, "Cutting Fluid Application Methods in Machining and Their Impact on Environment", International Conference on Emerging Technologies in Environmental Science and Engineering, 2009, Aligarh Muslim University, Aligarh, India.
8. M. Ravi Sankar and S.K. Choudhury, "Economic and Eco-friendly Machining- A Boon for Indian Machining Industry", International Conference on Mechanical and Building Science in 3rd Millennium, 2009, VIT University, Vellore, Tamilnadu, India.
7. M. Ravi Sankar V. K. Jain and J. Ramkumar, "Experimental Investigations into Rotating Workpiece Abrasive Flow Finishing", 17th International Conference on Wear of Materials (WOM-2009), 2009, Las Vegas, USA.
6. M. Ravi Sankar, J. Ramkumar and V. K. Jain, "Nanofinishing of Metal Matrix Composites using Polymer Rheological Abrasive Medium", 18th International Conference on Processing and Fabrication of Advanced Materials (PFAM-18), 2009, Sakura Hall, Tohoku University, Sendai, Japan.
2008
5. M. Ravi Sankar and S. K. Choudhury, "Experimental Comparative Study on Tool and Work Surface Tribological Characteristics in Turning with Flood Cooling and Minimum Quantity Lubrication (MQL)", Proceedings of International Conference on Recent Trends in Materials and Mechanical Engineering (ICMME 2008), Dr. Mahalingam College of Engineering and Technology Pollachi, Tamilnadu, India.
4. M. Ravi Sankar, V. K. Jain, J. Ramkumar and Kamal K. Kar, "Rheological Characterization and Performance Evaluation of a New Medium Developed for Abrasive Flow Finishing", 2nd International and 23rd All India Manufacturing Technology, Design and Research conference (AIMTDR-2008), IIT Madras, India, Pages 449-454.
2007
3. M. Ravi Sankar and S. K. Choudhury, "Experimental Study on Surface Characteristics in Pseudo-Dry Clean Machining (PDCM)", CPIE-2007, NIT Jalandhar, Punjab, India.
2. M. Ravi Sankar and S. K. Choudhury, "High Speed Turning with Minimum Quantity Cutting Fluid". International Conference on Advanced Manufacturing Technologies (ICAMT-07), Central Mechanical Engineering Research Institute, Durgapur, West Bengal, India.
2006
1. M. Ravi Sankar and S. K. Choudhury, "Effect of Mist Cooling on Surface Quality", Proceedings: International Conference on Advances in Mechanical Engineering (AME 2006), Baba Banda Singh Bahadur Engineering College, Fatehgarh Sahib, Punjab, India.