git clone: https://github.com/eschneid19/cpe-487
Weekly Reports
[2020-05-10] Tested out the final project code on the board.
[2020-05-08] Finished Lab 6, but unable to test without VGA. Continued working on final project
[2020-05-05] Completed Lab 5, unable to test due to not having the Pmod Inter-IC Sound
[2020-05-03] Led display code almost complete. Need to link deserialize output to volume level.
[2020-04-29] Uploaded deserialzer code to GitHub. This should convert the incoming sound to the board into 16-bit strings.
[2020-04-26] Discovered that a radio requires knowledge far beyond our abilities. Shifted project to display the decibel volume of any sound it picks up.
[2020-04-22] Completed Lab 4 with the keypad. Researching final project
[2020-04-14] Working on finishing the labs. Decided on doing a HAM radio for the final project with Jared Kantor
[2020-04-09] Ordered components have arrived, will begin finishing the labs
[2020-03-31] Ordered Pmod cable, keypad and potentiometer. Should arrive by 4/10. Updated GitHub readme and commented my changes to Lab 1
[2020-03-24] Prepared Lab 4 and Lab 5
[2020-03-18] Prepared Lab 3. Modified Lab 1 Part 1 and uploaded the changes to my GitHub. Changed switches and LED display side
[2020-02-20] Completed Lab 2. Discovered that the board will not boot from memory upon POWER ON if the hardware manager is open
[2020-02-11] Successfully completed Lab 1
[2020-01-28] Installed GHDL
[2020-01-23] Installed Vivado
[2020-01-21] Created website and a GitHub account