We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-28 · 8 min read · Independent comparison
If you want a ready-to-wear wired in-ear monitor you can plug straight into a phone, laptop or stage monitor feed, choose erjigo EDXPro KZ EDX; if you need a bare DIY amplifier board to build or retrofit high-impedance headphone output into your own project, choose MusRock 6pcs.
• erjigo EDXPro KZ EDX — biggest strength: a complete, finished IEM with a 10mm composite magnetic dynamic driver, a 23Ω / 112dB/mW spec sheet, a 10Hz–20kHz range and a detachable 0.75mm 2-pin cable.
• erjigo EDXPro KZ EDX — biggest trade-off: it is a low-impedance 23Ω load, so it is not a high-impedance studio headphone and it depends on the source you already own; upgrade cables and any Bluetooth module are bought separately.
• MusRock 6pcs — biggest strength: a TDA1308 Class AB stereo amp module rated at 2 × 80mW into 32Ω, 110dB SNR and 0.003% THD, with a 5Hz–200kHz response and flexible ±2.5V to ±15V supply options.
• MusRock 6pcs — biggest trade-off: it is a component, not a finished product — you supply the power, wiring and enclosure, and the listing is a 6-piece count of the same module.
• Who each pick is for: the erjigo EDXPro KZ EDX suits musicians, streamers and listeners who want sound out of the box; the MusRock 6pcs suits DIY builders, tinkerers and home-studio experimenters who want to drive headphones from their own circuit.
The erjigo EDXPro KZ EDX is the "open the box and listen" option. The housing is a skin-friendly imported resin that is high-temperature molded and finished with a UV varnish for a glossy, textured look, and the ear-hook shape with rounded tips is designed to sit in the auricle rather than hang loose. The pre-formed hooks are meant to hold the shell steady, which matters if you are moving around on a stage, walking a street, or leaning over a desk for hours. The brand claims the tight fit can cut outside noise enough that you only need 15–30% of your usual volume — a sensible way to think about isolation when you are commuting or tracking in a noisy room.
On sound, the headline is the Φ10mm composite magnetic dynamic driver. The low-frequency spec reaches down to 10Hz, and the tuning is described as popular and ACG oriented, with the magnetic structure adding low-end density. That points to electronic music, heavy instrumental material and anything that leans on a solid bass foundation, while the improved transient response is aimed at vocals and classical detail in the mids. Sensitivity is rated 112dB/mW with a 23Ω impedance and a 10Hz–20kHz range, so it will run off ordinary 3.5mm outputs without asking for a dedicated amp.
Who should buy it: musicians who need a cheap-to-replace wired monitor, listeners who want a detachable-cable IEM they can upgrade later, and anyone who wants an optional-mic version for calls or gaming. Who should skip it: if your whole reason for shopping is a genuine high-impedance studio load, this is the wrong tool — 23Ω is low impedance, and that is a design choice, not a flaw. Also skip it if you want a Bluetooth set out of the box; the wireless path here exists only by buying a separate upgrade cable, and the cable itself is not included. It carries a 12-month warranty from the purchase date.
The MusRock 6pcs is a different species of product entirely. It is a TDA1308 Class AB stereo headphone amplifier module on a large board, sold as a six-piece count. The core numbers are the interesting part: 2 × 80mW output into 32Ω, a 110dB signal-to-noise ratio, and 0.003% total harmonic distortion. In plain terms, that is a low-noise, low-distortion small amplifier — the kind of figure set you want when the job is clean gain rather than loudness. Frequency response runs from 5Hz to 200kHz, so the amp itself is not the bottleneck in the audible band, and the differential input impedance is 100kΩ, which is a friendly load for whatever feeds it.
The flexibility is the real selling point for builders. It accepts a ±2.5V to ±15V dual supply, or a single supply with an external bias circuit, and it draws only 8mA of quiescent current — low enough that battery-powered portables are realistic. The board uses a gold-plated pin base with 2.54mm spacing, works with a 3.5mm audio jack, and the brand states no external components are needed for basic operation. There is no calibration step; you wire it up and it runs. Connectivity is USB Type-C, it is listed as stereo headphone output, and the special feature is voice control, with compatible devices listed as desktop, laptop, printer, speaker and tablet.
Who should buy it: DIY audio builders, people retrofitting headphone output into a project box, students and hobbyists who want a known-IC amp module instead of designing one, and home-studio tinkerers who want a compact stereo stage they can power from a bench supply. MusRock positions itself as a broad small-parts supplier across Arduino, Raspberry Pi and general module work, so this fits that ecosystem. Who should skip it: anyone who wants to listen to music tonight. There is no enclosure, no volume knob in the box, no earpieces — the six pieces are modules, not a finished headphone amp, and you bring the power supply, the wiring and the patience. Warranty is stated at 18 months.
• Best for immediate listening → erjigo EDXPro KZ EDX. It arrives as a finished wired IEM with a 3.5mm plug and a 1.25m cable.
• Best for building or modifying gear → MusRock 6pcs. A TDA1308 amp module with a 2.54mm gold-plated pin base is meant to be soldered and wired into something.
• Best for a known headphone load → MusRock 6pcs. The 2 × 80mW into 32Ω rating, 110dB SNR and 0.003% THD are the numbers that matter when you are driving a specific pair of headphones.
• Best for portable, low-draw projects → MusRock 6pcs. 8mA quiescent current and a supply range starting at ±2.5V suit battery builds.
• Best for stage, street and sport use → erjigo EDXPro KZ EDX. Ear-hook shells, resin molding and claimed passive noise reduction fit movement.
• Best for bass-forward and electronic music → erjigo EDXPro KZ EDX. The 10Hz low end and bass-dense tuning are aimed exactly there.
• Best for upgrading later → erjigo EDXPro KZ EDX. The 0.75mm 2-pin detachable design lets you swap cables, though those cables cost extra.
• Best for a six-unit bench stash → MusRock 6pcs. Six identical modules means spares or six parallel projects.
One honest note on the "high impedance studio" angle that brought you here: the erjigo EDXPro KZ EDX is rated 23Ω, which is low impedance, and the MusRock 6pcs is an amplifier, not a headphone. If you specifically need a high-impedance headphone, neither of these is that. What the MusRock module gives you is the ability to build the driving stage; what the erjigo gives you is the transducer. In my opinion, the most interesting use of this pair is not either/or — it is running the erjigo IEM from a MusRock-based amp stage you built yourself, which is exactly the kind of project these two products are each half of.
If I had to pick one, I would buy the erjigo EDXPro KZ EDX. It is a complete, usable product the day it lands: a 10mm dynamic driver, a 23Ω/112dB/mW load that runs off a phone jack, a detachable 2-pin cable for future upgrades, and a 12-month warranty. The MusRock 6pcs is excellent at what it is — a low-noise, low-distortion TDA1308 amp board with a wide supply window and a real 6-piece count — but it only makes sense if you already enjoy building audio electronics. In my opinion, buyers who want sound now should take the erjigo; buyers who want to solder should take the MusRock.
do high impedance headphones sound better
Not automatically. Higher impedance mainly changes how a headphone interacts with the amplifier, and the data sheets here show the erjigo EDXPro KZ EDX is a 23Ω low-impedance design with 112dB/mW sensitivity, which is easy to drive from ordinary sources. Impedance is a matching question more than a quality guarantee.
is high impedance good for headphones
It can be, in the right system. A high-impedance load typically needs more voltage swing, which is why a dedicated amp like the MusRock 6pcs — 2 × 80mW into 32Ω with a supply range of ±2.5V to ±15V — exists. For a 23Ω IEM like the erjigo EDXPro KZ EDX, that extra voltage headroom is not required.
are high impedance headphones better
They are better for some jobs, not all. Higher impedance can reduce hiss from noisy outputs and pair well with beefier amps. But the erjigo EDXPro KZ EDX is built low-impedance on purpose, so it works from a 3.5mm jack without extra gear, and the MusRock 6pcs is the opposite kind of purchase: a component for building the amp side yourself.
why are high impedance headphones better
The usual argument is amplifier friendliness and lower sensitivity to output noise, plus less current draw from the source. That argument only holds if your amp can deliver the voltage. The MusRock 6pcs covers that side with a 110dB SNR, 0.003% THD and a 5Hz–200kHz response; the erjigo EDXPro KZ EDX sidesteps the whole issue by being easy to drive at 23Ω.
If you are weighing these two, check the current price on Amazon for each before you commit — the value case changes depending on what you already own and whether you want a finished IEM or a project.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Turtle Beach Recon 70 vs XocvDuy Headset: Headphones with, AILIHEN Kids Headphones Bulk vs Cofano Kids Headphones Bulk, Tonies Headphones vs clelize Kids: Foldable on Ear, Razer Kraken V4 vs AOC Gaming Headset: Headphones with Mic