Embedded Files
Vehicle Specifications:
Vehicle Specifications:
- Acquired as a used roller from eBay
- VXL Model
- Installed LCG conversion kit
- Installed RPM Rear Bumper
- Added felt strip under battery compartment
- Installed XL-5 ESC and Motor System (from Slash 2WD)
- Installed Radiolink Radio System
- Installed Rear GTR Shocks on the Front (https://www.youtube.com/watch?v=c-Zz2TfhW8U&list=PLpibWg8NnSd3CWp9Lc2e0ZSNxeVq3cNGH)
- Installed Motor Fan
- Installed Front and Rear Suspension Arm Guards (Removed Rear Later)
- Installed GTR Shocks on the Rear
- Installed Hobbywing XR8 ESC and Motor System
- Installed Duratrax Sixpack SCT Tires
- Installed Castle Creations Copperhead ESC + Motor System (3200kv)
Initial Iteration
Initial Iteration
Came with a Stampede 4x4 front bumper, aluminum castor blocks, aluminum steering blocks, aluminum rear hub carriers, Proline Bodymounts, and new tires. No electronics were included besides the stock servo. A rear bumper, radio, receiver, motor, ESC, and a body are required to complete the vehicle.
Front View
Front View
Bottom View
Bottom View
Rear View
Rear View
Components
Components
From top left to bottom right: RPM Rear Bumper, LCG Conversion Kit, XL-5 ESC, Titan 12T Brushed Motor, Proline Bodymounts
Parts Installation
Parts Installation
Disassembled the whole vehicle for cleaning and maintenance. Cleaned and re-oiled the ball bearings. Cleaned and re-greased the differential gears. Refilled shocks with 30wt oil. Installed LCG chassis, new rear bumper, new front bumper (not all parts shown in pictures), bodymounts, motor, ESC, and receiver. Rebuilt the slipper clutch. Replaced the worn front right driveshaft yoke. Installed old tires from Slash 2wd (new tires went on Slash 2wd).
Refreshed Iteration I
Refreshed Iteration I
Front View
Front View
Bottom View
Bottom View
Test Iterations
Test Iterations
Refreshed Iteration II
Refreshed Iteration II
Installed rear GTR shocks on the front with rear shock tower modification. Installed rear GTR shocks on the rear. Relocated receiver box to the front of the car to make space for the ESC. Installed the Hobbywing XR8 ESC and Motor System (3600kv).
Tuning Iterations
Tuning Iterations
Current Iteration
Current Iteration
Build Threads on Forums:
https://forums.traxxas.com/discussion/9095606/rcwillys-slash-4x4-build-documentation-thread/p1
YouTube Channel: https://www.youtube.com/channel/UCfSC4NvEPft3NNCzMo3qJmA
Page updated
Google Sites
Report abuse