# scans around the current location searching for a star
# stops immediately when one or more stars are detected
import time
import signal
#--------photo stuff ---
clr.AddReference("SharpCap.Base")
from SharpCap.Base import StarDetectionParameters
# ── raster Parameters ──────────────────────────────────────────────
DEG = 2.0 # degrees in all directions
AZ_RATE = 120.0 # 0.5°/s (sidereal multiples)
ALT_DEG = 0.5 # how many degrees between sweeps
POLL_TIME = 0.33
# ─── photo parameters ────────────────────────────────────────────────
params = StarDetectionParameters()
params.MaxCount = 100
params.MinSize = 1
params.MaxSize = 50
params.SuppressHotPixels = True
# ───────────────────────────────────────────────────
ALT_RATIO = ALT_DEG/(4*DEG) # Alt rate as fraction of Az rate
ALT_RATE = AZ_RATE * ALT_RATIO
RASTER_ALT = DEG * 2.0
# ───────────────────────────────────────────────────
mount = SharpCap.Mounts.SelectedMount
def stop_slew(signum=None, frame=None):
mount.MoveAxis(0, 0.0)
mount.MoveAxis(1, 0.0)
print("Slew stopped.")
print(f"FINAL Alt: {mount.Altitude:.4f}° | Az: {mount.Azimuth:.4f}°")
if signum is not None:
raise SystemExit(0)
signal.signal(signal.SIGTERM, stop_slew)
signal.signal(signal.SIGINT, stop_slew)
start_alt = mount.Altitude
start_az = mount.Azimuth
print(f"START Alt: {start_alt:.4f}° | Az: {start_az:.4f}°")
# ── boundary checks (Alt only — Az is circular, no hard limits) ────
ALT_LIMIT = 85.0
if start_alt + DEG > ALT_LIMIT:
print(f"ERROR: Alt {start_alt:.2f}° + sweep {DEG}° would exceed {ALT_LIMIT}°. Aborting.")
raise SystemExit(1)
if start_alt - DEG < 0.0:
print(f"ERROR: Alt {start_alt:.2f}° - sweep {DEG}° would go below 0°. Aborting.")
raise SystemExit(1)
delta_alt = DEG
delta_az = DEG
# ── Phase 1: diagonal move down-left ────────────────────────
print("move diagonally down-left")
mount.MoveAxis(0, -AZ_RATE) # azimuth left
mount.MoveAxis(1, -AZ_RATE) # altitude down
try:
while True:
time.sleep(POLL_TIME)
cur_alt = mount.Altitude
cur_az = mount.Azimuth
d_alt = cur_alt - start_alt
d_az = cur_az - start_az
#print(f"[DIAG] ΔAlt: {d_alt:+.4f}° | ΔAz: {d_az:+.4f}°")
if d_alt <= -DEG:
print("Stopped: altitude limit reached.")
break
if d_az <= -DEG:
print("Stopped: azimuth limit reached.")
break
finally:
mount.MoveAxis(0, 0.0)
mount.MoveAxis(1, 0.0)
print(f"STOP Alt: {mount.Altitude:.4f}° | Az: {mount.Azimuth:.4f}°")
# ── Phase 2: raster sweep ────────────────────────────────────
print(f"RASTER START Alt: {mount.Altitude:.4f}° | Az: {mount.Azimuth:.4f}°")
az_dir = 1.0
stars = []
star_found = False
mount.MoveAxis(0, az_dir * AZ_RATE)
mount.MoveAxis(1, ALT_RATE)
def az_delta(current, reference):
"""Signed angular difference current - reference, wrapped to (-180, 180]."""
return ((current - reference + 180.0) % 360.0) - 180.0
try:
while True:
time.sleep(POLL_TIME)
delta_alt = mount.Altitude - start_alt
delta_az = az_delta(mount.Azimuth, start_az)
#print(f"[RASTER] ΔAlt: {delta_alt:+.4f}° | ΔAz: {delta_az:+.4f}° | Az dir: {'+' if az_dir > 0 else '-'}")
# detect stars
captured = SharpCap.SelectedCamera.GetDisplayedFrame()
stars = captured.Frame.DetectStars(params)
#print(len(stars), "stars found")
if len(stars) > 0:
star_found = True
print(f"Star(s) found — stopping at Alt: {mount.Altitude:.4f}° | Az: {mount.Azimuth:.4f}°")
break
if delta_alt >= RASTER_ALT:
print("Raster complete — Alt limit reached.")
break
if az_dir > 0 and delta_az >= DEG:
az_dir = -1.0
mount.MoveAxis(0, az_dir * AZ_RATE)
print("-- Az reverse: going left --")
print(f"[RASTER] ΔAlt: {delta_alt:+.4f}° | ΔAz: {delta_az:+.4f}° | Az dir: {'+' if az_dir > 0 else '-'}")
elif az_dir < 0 and delta_az <= -DEG:
az_dir = 1.0
mount.MoveAxis(0, az_dir * AZ_RATE)
print("-- Az reverse: going right --")
print(f"[RASTER] ΔAlt: {delta_alt:+.4f}° | ΔAz: {delta_az:+.4f}° | Az dir: {'+' if az_dir > 0 else '-'}")
finally:
stop_slew()
time.sleep(0.5)
if star_found:
print(f"Staying at star location Alt: {mount.Altitude:.4f}° | Az: {mount.Azimuth:.4f}°")
else:
print("No stars found — slewing home", start_alt, start_az)
mount.SlewToAltAz(start_alt, start_az)
time.sleep(4.0)
print(mount.Altitude, mount.Azimuth)