How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want to add LDAC streaming to a home stereo, speakers, or an older wired system, choose eppfun Audio Receiver; if you need LDAC headphones in your ears for commuting, calls, and workouts, choose EarFun Air 2. These two are not really rivals — they are two halves of the same idea. One turns a dumb amp into a wireless LDAC source. The other puts Hi-Res LDAC playback directly in your ears. Pick the one that fixes the problem you actually have.
• eppfun Audio Receiver — biggest strength: It brings LDAC, aptX HD, aptX Low Latency, AAC and SBC to gear that was never Bluetooth, via RCA or 3.5mm out, with a 3D surround button and over 12 hours of playback.
• eppfun Audio Receiver — biggest trade-off: It is a receiver only, not headphones. You still need a phone or source to stream from, it charges over USB-C in about 2 hours, and it is a plastic-and-aluminum box, not something you wear.
• EarFun Air 2 — biggest strength: True wireless LDAC earbuds with 10mm dynamic drivers, Bluetooth 5.3 multipoint, 4 mics for calls, an app with EQ, IPX7 sweat and rain protection, and up to 40 hours total with the case.
• EarFun Air 2 — biggest trade-off: LDAC is not compatible with iOS devices, it cuts battery life to roughly 23 hours total (5.5 hours per charge), and EarFun itself recommends keeping LDAC off for the most stable multipoint connection.
• Who each pick is for: eppfun if you want to upgrade a home stereo or speaker; EarFun Air 2 if you want LDAC headphones you wear everywhere.
This little box exists for one job: taking a Bluetooth audio signal and pushing it out through RCA or a 3.5mm jack into something that has no wireless of its own. Inside it runs a Bluetooth 5.0 chip, and it supports LDAC at up to 990 kbps — that is the headline spec here. High bitrate LDAC over that link means far less of the squashing that normally happens when you stream over Bluetooth, so the receiver can hand your amp something much closer to the original file. If you have a decent home stereo, an old shelf system, or a set of powered speakers collecting dust, this is the cheap fix.
Who should buy it? Anyone with a wired audio system and a phone full of Hi-Res files or a Hi-Res streaming subscription. It works with smartphones, speakers, headphones, car stereos and home stereos, and it plays nicely with Spotify, Apple Music, YouTube and Netflix. Who should skip it? If you want something in your ears, this is not that — it has no drivers, no mics and nothing to wear. It is also not a transmitter, so it will not send audio out to a pair of Bluetooth headphones. Buy it to feed a system, not to be one.
EarFun Air 2: Who It's For
The EarFun Air 2 is the opposite kind of product: LDAC playback that lives in your ears. Each bud carries a 10mm wool composite dynamic driver, and paired with the LDAC codec and Hi-Res Audio certification, EarFun says the link moves about three times more data than ordinary true-wireless earbuds. That is the same principle as the eppfun box, just pointed at your head instead of your amplifier — less compression, more detail kept intact. One thing to know up front: LDAC does not work with iOS devices, so iPhone owners get the earbuds without that particular benefit.
The everyday specs are where this thing earns its place. Bluetooth 5.3 with multipoint keeps you connected to two devices at once so you can jump between a call and a video without re-pairing. Four microphones handle environmental noise cancellation on calls, which matters if you take meetings on the move. Battery is 9 hours on a single charge and 40 hours total with the case — but switch LDAC on and that drops to about 5.5 and 23 hours respectively. The case charges over USB-C or any universal wireless charger. They weigh 4.5g each, ship with four ear tip sizes, and carry an IPX7 rating, meaning sweat and rain splashes are not a problem.
The custom EarFun App handles multi-EQ, touch control remapping, battery checks and a "Find Headphones" feature that pings a lost bud. Who should buy it? Commuters, gym-goers, remote workers and Android users who want Hi-Res wireless audio without a cable. Who should skip it? iPhone users who specifically want LDAC, and anyone who wants maximum stability at all times — EarFun advises disabling LDAC for the steadiest multipoint connection and staying within about 2 metres of your device when LDAC is running.
• Best for upgrading a home stereo or wired speakers → eppfun Audio Receiver. RCA and 3.5mm out, LDAC in, no headphones required.
• Best for listening on the move → EarFun Air 2. 4.5g per bud, IPX7, and a charging case that fits a pocket.
• Best for call quality → EarFun Air 2. Four mics with environmental noise cancellation versus no microphone at all on the eppfun.
• Best for raw battery life → EarFun Air 2 (standard mode). Up to 40 hours total with the case, against just over 12 hours of continuous playback on the receiver.
• Best for battery life while running LDAC → eppfun Audio Receiver. Its 12-plus hours hold steady, while the EarFun Air 2 drops to roughly 23 hours total in LDAC mode.
• Best for multipoint between two devices → EarFun Air 2. Bluetooth 5.3 multipoint, though EarFun recommends turning LDAC off to keep it stable.
• Best for iPhone owners → eppfun Audio Receiver. LDAC is not compatible with iOS on the earbuds, but the receiver works from any Bluetooth source.
• Best for a fun sound tweak on a hi-fi → eppfun Audio Receiver. The 3D surround button adds deep dynamic bass on demand.
If I had to choose one, I would buy the EarFun Air 2. It is the more complete product: it plays the audio itself, handles calls, survives sweat and rain, charges wirelessly, and still gives you LDAC and Hi-Res playback on Android. The eppfun Audio Receiver is genuinely clever and I would happily recommend it to anyone with a good stereo sitting silent — but it only solves half the problem and leaves you needing a phone nearby anyway. If your goal is ldac headphones you actually wear, the EarFun Air 2 is my pick.
what is ldac headphones
LDAC is a Bluetooth audio codec that carries far more data than standard Bluetooth streaming — up to 990 kbps on the eppfun receiver, and roughly three times the data of ordinary true-wireless on the EarFun Air 2. "LDAC headphones" simply means headphones or earbuds that support that codec so wireless playback keeps more of the original detail.
what is ldac support in headphones
It means the headphones can decode an LDAC stream, but you also need a source that sends it. The EarFun Air 2 supports LDAC with its 10mm drivers and Hi-Res Audio certification, but LDAC is not compatible with iOS devices, so your phone matters as much as the earbuds.
what is ldac codec in headphones
It is the compression method used to squeeze audio into a Bluetooth signal and unpack it on the other end. Higher bitrate means less degradation — which is exactly why the eppfun Audio Receiver lists LDAC at up to 990 kbps alongside aptX HD, aptX Low Latency, AAC and SBC.
what is ldac sony headphones
LDAC is a Sony-developed codec, and it shows up across a lot of wireless gear today, not just Sony's own. Here it appears in two very different products: a home-stereo receiver from eppfun and a pair of true-wireless earbuds from EarFun.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: SAMVEK IP68 vs JrnyEote OWS-G206, BCRKLO Earphones vs Mobique USB C, Sony WF-C700N vs AZLA ASE-600, Sonos Ace Noise Cancelling vs Jabra Evolve2