Publications

J. Hyung Lee, D. H. Min, J. Hoon Park and S. Guy Min, "Machine learning-driven framework for optimal split ratio determination in PMSM design," IEEE Access, vol. 13, pp. 170601-170618, 2025.

J. H. Park, B. Sariloglu and S. G. Min, "Design optimization of control moment gyroscope spin motor under power-limited conditions," IEEE Transactions on Aerospace and Electronic Systems, doi: 10.1109/TAES.2025.3610809.

K. J. Kim, J. H. Park, D. H. Min and S. G. Min, "Data-driven optimization of aspect ratio in permanent magnet machines using deep learning and SHAP analysis," IEEE Access, vol. 13, pp. 122164-122174, 2025.

K. H. Jeong and S. G. Min, "Single-step design methodology for PM motors in control moment gyroscopes based on practical slot-filling factor formula," IEEE Transactions on Aerospace and Electronic Systems, vol. 61, no. 5, pp. 14100-14112, Oct. 2025.

W. Lee, J. Im, S. G. Min, R. A. Torres, H. Kim and B. Sarlioglu, "Short-circuit fault-tolerant operation of modular and reconfigurable six-phase PMSM drive," IEEE Journal of Emerging and Selected Topics in Power Electronics, doi: 10.1109/JESTPE.2025.3579297.

 J. H. Kim and S. G. Min, "Specific torque optimization of control moment gyroscope motor based on linear regression technique," IEEE Transactions on Aerospace and Electronic Systems, vol. 61, no. 4, pp. 8210-8224, Aug. 2025.

 D. H. Lee and S. G. Min, "Design technique of open-slot surface-mounted PM machines using coenergy-based subdomain model and teaching-learning-based optimization algorithm," IEEE Access, vol. 12, pp. 88492-88505, 2024.

 D. M. Choi and S. G. Min, "Comparative analysis of inner and outer rotor surface PM machines based on optimization dataset," IEEE Access, vol. 12, pp. 81925-81937, 2024.

 D. H. Min and S. G. Min, "Optimal split ratio for high torque density PM machines based on analytical determination," IEEE Transactions on Transportation Electrification, vol. 10, no. 4, pp. 8758-8770, Dec. 2024.

 J. H. Park and S. G. Min, "Power-constrained design optimization of PM machines for low-power low-voltage and high-torque applications," IEEE Transactions on Transportation Electrification, vol. 10, no. 3, pp. 7127-7139, Sept. 2024.

 C. H. Bae and S. G. Min, "Data-driven electromagnetic-thermal coupling optimization of permanent magnet machines for UAVs," IEEE Transactions on Transportation Electrification, vol. 10, no. 3, pp. 6473-6487, Sept. 2024.

 W. Lee, S. G. Min, and B. Sarlioglu, "Fault-tolerant operation of six-phase permanent magnet motor drive with open-circuit failures," IEEE Transactions on Transportation Electrification, vol. 10, no. 3, pp. 5910-5920, Sept. 2024.

 J. Cheon, S. B. Bae, and S. G. Min, "Analytical modeling and optimization of PM synchronous machines using novel R262-TLBO algorithm," IEEE Transactions on Magnetics, vol. 59, no. 12, pp. 1-16, Dec. 2023.

 H. J. Lee and S. G. Min, "Manufacturing-based design methodology of permanent magnet machines considering practical slot-filling factor," IEEE Transactions on Transportation Electrification, vol. 10, no. 2, pp. 3756-3769, June 2024.

 S. B. Bae, D. S. Choi, and S. G. Min, "Artificial Hunting Optimization: A novel method for design optimization of permanent magnet machines," IEEE Transactions on Transportation Electrification, vol. 10, no. 2, pp. 3305-3319, June 2024.

 S. G. Min, “Investigation of key parameters on cogging torque in permanent magnet machines based on dominant harmonic contents,” IEEE Transactions on Transportation Electrification, vol. 10, no. 1, pp. 174-186, March 2024.

 S. G. Min, “Analytical design and optimization of axial flux permanent magnet machines with slotless structure,” IEEE Transactions on Transportation Electrification, vol. 8, no. 2, pp 1994-2004, Jun. 2022.

 K. T. Kim, M. S. Manoharan, M. A. T. Abdelkader, C. G. Lee, J. H. Park, A. Ahmed, S. G. Min, and J. H. Park, “Skin effect-related AC resistance study in macroscopic scale carbon nanotube yarn applicable to high-power converter,” IEEE Transactions on Nanotechnology, vol. 20, pp. 417-424, 2021.

 S. G. Min, “Modeling, investigation, and minimization of AC winding loss in slotless PM machines,” IEEE Transactions on Energy Conversion, vol. 36, no. 3, pp 2249-2260, Sep. 2021.

 H. Ding, Y, Li, S. G. Min, G. Nellis, and B. Sarlioglu, “Design and evaluation of the performance of an integrated flux-switching motor-compressor with airfoil-shaped rotor,” IEEE Transactions on Transportation Electrification, vol. 7, no. 3, pp 1573-1588, Sep. 2021.

 S. G. Min, “Integrated design method of linear PM machines considering system specifications,” IEEE Transactions on Transportation Electrification, vol. 7, no. 2, pp 804-814, Jun. 2021.

 S. G. Min, “A design technique for shaping of back-EMF using heuristic optimization and winding factors in brushless AC and DC machines,” Electric Power Components and Systems, vol. 48, no. 9-10, pp. 944-956, Oct. 2020.

 S. G. Min, “Inductance calculation of coreless-type linear PM machines based on analytical field projection and coil separation method,” IEEE Transactions on Magnetics, vol. 56, no. 9, Art. no. 8101511, Sep. 2020.

 S. G. Min and B. Sarlioglu, “Analytical prediction and multi-constrained nonlinear optimization of slotted linear PM motors taking into account 2-D end effects,” IEEE Transactions on Industrial Electronics, vol. 67, no. 4, pp 2965-2976, Apr. 2020.

 S. G. Min and B. Sarlioglu, “A comparative study of coreless-type PM linear synchronous machines with non-overlapping windings,” IEEE Transactions on Industry Applications, vol. 55, no. 3, pp 2481-2489, May-Jun. 2019.

 S. G. Min and B. Sarlioglu, “Fast and systematic design optimization of surface-mounted PM machines using advanced analytical models and subharmonic elimination methods,” IEEE Transactions on Magnetics, vol. 55, no. 1, Art. no. 8100216, Jan. 2019.

 S. G. Min and B. Sarlioglu, “Analysis and comparative study of flux weakening capability in fractional-slot concentrated windings,” IEEE Transactions on Energy Conversion, vol. 33, no. 3, pp 1025-1035, Sep. 2018.

 S. G. Min and B. Sarlioglu, “Advantages and characteristic analysis of slotless rotary PM machines in comparison with conventional laminated design using statistical technique,” IEEE Transactions on Transportation Electrification, vol. 4, no. 2, pp 517-524, Jun. 2018.

 S. G. Min, G. Bramerdorfer, and B. Sarlioglu, “Analytical modeling and optimization for electromagnetic performances of fractional-slot PM brushless machines,” IEEE Transactions on Industrial Electronics, vol. 65, no. 5, pp 4017-4027, May. 2018.

 S. G. Min, D. Bobba, and B. Sarlioglu, “Analysis of overhang effects using conductor separation method in coreless-type PM linear machines,” IEEE Transactions on Magnetics, vol. 54, no. 4, Art. no. 9300304, Apr. 2018.

 S. G. Min and B. Sarlioglu, “Modeling and investigation on electromagnetic noise in PM motors with single and double layer concentrated winding for EV and HEV application,” IEEE Transactions on Transportation Electrification, vol. 4, no. 1, pp 292-302, Mar. 2018

 S. G. Min and B. Sarlioglu, “3-D performance analysis and multiobjective optimization of coreless-type PM linear synchronous motors,” IEEE Transactions on Industrial Electronics, vol. 65, no. 2, pp 1855-1864, Feb. 2018.

 S. G. Min and B. Sarlioglu, “Analytical calculation of back-EMF waveform for linear PM motors in slotted and slotless structures,” IEEE Transactions on Magnetics, vol. 53, no. 12, Art. no. 8112910, Dec. 2017.

J. H. Park, B. Sariloglu and S. G. Min, "Design optimization of control moment gyroscope spin motor under power-limited conditions," in IEEE Transactions on Aerospace and Electronic Systems, doi: 10.1109/TAES.2025.3610809.

K. H. Jeong and S. G. Min, "Single-step design methodology for PM motors in control moment gyroscopes based on practical slot-filling factor formula," IEEE Transactions on Aerospace and Electronic Systems, vol. 61, no. 5, pp. 14100-14112, Oct. 2025.

J. H. Kim and S. G. Min, "Specific torque optimization of control moment gyroscope motor based on linear regression technique," IEEE Transactions on Aerospace and Electronic Systems, vol. 61, no. 4, pp. 8210-8224, Aug. 2025.

D. H. Min and S. G. Min, "Optimal split ratio for high torque density PM machines based on analytical determination," IEEE Transactions on Transportation Electrification, vol. 10, no. 4, pp. 8758-8770, Dec. 2024.

J. H. Park and S. G. Min, "Power-constrained design optimization of PM machines for low-power low-voltage and high-torque applications," IEEE Transactions on Transportation Electrification, vol. 10, no. 3, pp. 7127-7139, Sept. 2024.

C. H. Bae and S. G. Min, "Data-driven electromagnetic-thermal coupling optimization of permanent magnet machines for UAVs," IEEE Transactions on Transportation Electrification, vol. 10, no. 3, pp. 6473-6487, Sept. 2024.

J. Cheon, S. B. Bae, and S. G. Min, "Analytical modeling and optimization of PM synchronous machines using novel R262-TLBO algorithm," IEEE Transactions on Magnetics, vol. 59, no. 12, pp. 1-16, Dec. 2023.

H. J. Lee and S. G. Min, "Manufacturing-based design methodology of permanent magnet machines considering practical slot-filling factor," IEEE Transactions on Transportation Electrification,  vol. 10, no. 2, pp. 3756-3769, June 2024.

S. B. Bae, D. S. Choi, and S. G. Min, "Artificial Hunting Optimization: A novel method for design optimization of permanent magnet machines," IEEE Transactions on Transportation Electrification, vol. 10, no. 2, pp. 3305-3319, June 2024.

S. G. Min, “Investigation of key parameters on cogging torque in permanent magnet machines based on dominant harmonic contents,” IEEE Transactions on Transportation Electrification, vol. 10, no. 1, pp. 174-186, March 2024.

S. G. Min, “Analytical design and optimization of axial flux permanent magnet machines with slotless structure,” IEEE Transactions on Transportation Electrification, vol. 8, no. 2, pp 1994-2004, Jun. 2022.

S. G. Min, “Modeling, investigation, and minimization of AC winding loss in slotless PM machines,” IEEE Transactions on Energy Conversion, vol. 36, no. 3, pp 2249-2260, Sep. 2021.

S. G. Min, “Integrated design method of linear PM machines considering system specifications,” IEEE Transactions on Transportation Electrification, vol. 7, no. 2, pp 804-814, Jun. 2021.

S. G. Min, “Inductance calculation of coreless-type linear PM machines based on analytical field projection and coil separation method,” IEEE Transactions on Magnetics, vol. 56, no. 9, Art. no. 8101511, Sep. 2020.

S. G. Min and B. Sarlioglu, “Analytical prediction and multi-constrained nonlinear optimization of slotted linear PM motors taking into account 2-D end effects,” IEEE Transactions on Industrial Electronics, vol. 67, no. 4, pp 2965-2976, Apr. 2020.

S. G. Min and B. Sarlioglu, “A comparative study of coreless-type PM linear synchronous machines with non-overlapping windings,” IEEE Transactions on Industry Applications, vol. 55, no. 3, pp 2481-2489, May-Jun. 2019.

S. G. Min and B. Sarlioglu, “Fast and systematic design optimization of surface-mounted PM machines using advanced analytical models and subharmonic elimination methods,” IEEE Transactions on Magnetics, vol. 55, no. 1, Art. no. 8100216, Jan. 2019.

S. G. Min and B. Sarlioglu, “Analysis and comparative study of flux weakening capability in fractional-slot concentrated windings,” IEEE Transactions on Energy Conversion, vol. 33, no. 3, pp 1025-1035, Sep. 2018.

S. G. Min and B. Sarlioglu, “Advantages and characteristic analysis of slotless rotary PM machines in comparison with conventional laminated design using statistical technique,” IEEE Transactions on Transportation Electrification, vol. 4, no. 2, pp 517-524, Jun. 2018.

S. G. Min, G. Bramerdorfer, and B. Sarlioglu, “Analytical modeling and optimization for electromagnetic performances of fractional-slot PM brushless machines,” IEEE Transactions on Industrial Electronics, vol. 65, no. 5, pp 4017-4027, May. 2018.

S. G. Min, D. Bobba, and B. Sarlioglu, “Analysis of overhang effects using conductor separation method in coreless-type PM linear machines,” IEEE Transactions on Magnetics, vol. 54, no. 4, Art. no. 9300304, Apr. 2018.

S. G. Min and B. Sarlioglu, “Modeling and investigation on electromagnetic noise in PM motors with single and double layer concentrated winding for EV and HEV application,” IEEE Transactions on Transportation Electrification, vol. 4, no. 1, pp 292-302, Mar. 2018

S. G. Min and B. Sarlioglu, “3-D performance analysis and multiobjective optimization of coreless-type PM linear synchronous motors,” IEEE Transactions on Industrial Electronics, vol. 65, no. 2, pp 1855-1864, Feb. 2018.

S. G. Min and B. Sarlioglu, “Analytical calculation of back-EMF waveform for linear motors in slotted and slotless structures,” IEEE Transactions on Magnetics, vol. 53, no. 12, Art. no. 8112910, Dec. 2017.