Yun-Jae Won, Jae-Hyun Kim, Soo-Min An, Myung-Seop Lim, "Robust Optimal Design Process of PMSMs With Step-Skew for Minimizing Cogging Torque Mean and Deviation Considering Manufacturing Tolerances", in IEEE Transactions on Industry Applications. Early Access.

Seon Hyeong Kim, Dong Kil Kang, Jae-Hyun Kim, "A Study on the Improvement of Flux-Based Torque Control Performance Through Compensation of Voltage Error Caused by Dead-Time", in IEEE Access. 2026.06.

Jae-Hyun Kim, Yun-Jae Won, Soo-Hwan Park, Myung-seop Lim, "Effect of Manufacturing Tolerances and Magnetic Anisotropy of Electrical Steel on Surface-Mounted Permanent Magnet Synchronous Motor Cogging Torque", in Mathematics. 2026.02. 

Dong-Kyun Son, Jae-Hyun Kim, "Fault-Tolerant Control of Dual Three-Phase Permanent Magnet Synchronous Motor Under Two-Phase Open Faults", in IEEE Transactions on Industrial Electronics. 2026.01. 

Kyoung-Soo Cha, Jae-Hyun Kim, Soo-Gyung Lee, Min-Ro Park, "Design of a High-Efficiency External Rotor Interior Permanent Magnet Synchronous Motor Without Magnetic Leakage Flux Path", in Mathematics. 2025.06 

Jae-Hyun Kim, Yun-Jae Won, Myung-Seop Lim, “Analysis and Reduction of Radial Vibration of FSCW PMSM Considering the Phase of Radial, Tangential Forces and Tooth Modulation Effect”, in IEEE Transactions on Transportation Electrification. 2025.02 

Kyoung-Soo Cha, Jae-Hyun Kim, Sung-Woo Hwang, Myung-Seop Lim, Soo-Hwan Park, “High-Efficiency e-Powertrain Topology by Integrating Open-End Winding and Winding Changeover for Improving Fuel Economy of Electric Vehicles”, in Mathematics. 2024.10. 

Yun-Jae Won, Jae-Hyun Kim, Soo-Min An, Myung-Seop Lim, “Comparative Study of Cogging Torque, Torque Ripple, and Vibration on Stator Tooth Chamfer Types in Permanent Magnet Synchronous Motors”, in IEEE Transactions on Magnetics. 2024.09. 

Chi-Sung Park, Jae-Hyun Kim, Soo-Hwan Park, Myung-Seop Lim, “Effect of Electromagnetic Force Caused by PMSM on the Vibration/Noise of Reciprocating Compressors”, in IEEE Access. 2023.06. 

Jae-Hyun Kim, Jun-Yeol Ryu, Soo-Hwan Park, Kyoung-Soo Cha, Yun-Jae Won, Chi-Sung Park, Myung-Seop Lim, “Investigation on Radial Vibration of FSCW PMSM According to Pole/Slot Combination Considering Phase of Radial, Tangential Force and Moment”, in IEEE Transactions on Industry Applications. 2024.01.

Dong-Min Kim, Jun-Woo Chin, Jae-Hyun Kim, Myung-Seop Lim, “Analytical temperature estimation process of the air supply system of the proton exchange membrane fuel cell stack in fuel cell electric vehicles”, in Energy. 2023.11.

Jae-Hyun Kim, So-Yeon Im, Soo-Min An, Kyoung-Soo Cha, Myung-Seop Lim, “Comparative Study of Various Slot Pitches for 2-Pole 6-Slot Ultra-High-Speed Permanent Magnet Synchronous Motors”, in IEEE Transactions on Magnetics. 2023.11.

Jin-Cheol Park, Jae-Hyun Kim, Soo-Hwan Park, Ki-O Kim, Moo-Hyun Sung, Myung-Seop Lim, “Design Optimization Using Asymmetric Rotor in IPMSM for Torque Ripple Reduction Considering Forward and Reverse Directions”, in IEEE Transactions on Magnetics. 2023.11. 

Yun-Jae Won, Jae-Hyun Kim, Soo-Hwan Park, Ji-Hyeon Lee, Soo-Min An, Doo-Young Kim, Myung-Seop Lim, “Transfer Learning-Based Design Method for Cogging Torque Reduction in PMSM With Step-Skew Considering 3-D Leakage Flux”, in IEEE Transactions on Magnetics. 2023.11. 

Baik-Kee Song, Jae-Hyun Kim, Kyu-Yun Hwang, Myung-Seop Lim, “Electro-Mechanical Characteristics of Dual-Winding Motor According to Winding Arrangement for Brake Systems in Highly Automated Driving Vehicles”, in IEEE Transactions on Vehicular Technology. 2023.10. 

Jae-Hyun Kim, Soo-Hwan Park, Jun-Yeol Ryu, Myung-Seop Lim, “Comparative Study of Vibration on 10-Pole 12-Slot and 14-Pole 12-Slot PMSM Considering Tooth Modulation Effect”, in IEEE Transactions on Industrial Electronics. 2023.04. 

Chi-Sung Park, Jae-Hyun Kim, Soo-Hwan Park, Young-Doo Yoon, Myung-Seop Lim, “Multi-Physics Characteristics of PMSM for Compressor According to Driving Mode Considering PWM Frequency”, in IEEE Access. 2022.10. 

Jun-Yeol Ryu, Min-Ro Park, Jae-Hyun Kim, Myung-Seop Lim, “Analysis on Noise Source of Claw Pole Machine in Duplex Three-Phase and Belt-Driven System”, in Journal of Electrical Engineering & Technology. 2022.09.

Jae-Hyun Kim, Dong-Min Kim, Young-Hoon Jung, Myung-Seop Lim, “Design of Ultra-High-Speed Motor for FCEV Air Compressor Considering Mechanical Properties of Rotor Materials”, in IEEE Transactions on Energy Conversion. 2021.12. 

Soo-Hwan Park, Jin-Cheol Park, Sung-Woo Hwang, Jae-Hyun Kim, Myung-Seop Lim, “Model Predictive Control for Torque Ripple Suppression Caused by Misalignment of the Gearbox”, in IEEE Transactions on Energy Conversion. 2021.06.

Jae-Hyun Kim, Kyoung-Soo Cha, Sung-Woo Hwang, Soo-Gyung Lee, Min-Ro Park, Young-Doo Yoon, Myung-Seop Lim, “Analysis of Effect of the Magnetization Distribution of Multi-Pole PM on SPMSM Performance Using Equivalent Magnetic Circuit Considering Dead Zone”, in Energies. 2021.06. 

Jin-Cheol Park, Soo-Hwan Park, Jae-Hyun Kim, Soo-Gyung Lee, Geun-Ho Lee, Myung-Seop Lim, “Diagnosis and Robust Design Optimization of SPMSM Considering Back EMF and Cogging Torque due to Static Eccentricity”, in Energies. 2021.05.

Dong-Min Kim, Jae-Hyun Kim, Soo-Gyung Lee, Min-Ro Park, Geun-Ho Lee, Myung-Seop Lim, “Estimation Method for Rotor Eddy Current Loss in Ultrahigh-Speed Surface-Mounted Permanent Magnet Synchronous Motor”, in IEEE Transactions on Magnetics. 2021.02. 

Soo-Hwan Park, Jin-Cheol Park, Sung-Woo Hwang, Jae-Hyun Kim, Hyeon-Jin Park, Myung-Seop Lim, “Suppression of Torque Ripple Caused by Misalignment of the Gearbox by Using Harmonic Current Injection Method”, in IEEE/ASME Transactions on Mechatronics. 2020.08.