Chimec 1044 Corrosion Inhibitor Pdf

Here is a possible title and article with html formatting for the keyword "Chimec 1044 corrosion inhibitor pdf":

Chimec 1044: A Highly Effective Corrosion and Fouling Inhibitor for Refinery Towers

Corrosion and fouling are common problems in refinery towers, especially in the vapour lines of atmospheric and vacuum distillation units, and catalytic units. These problems can cause equipment damage, reduced efficiency, increased maintenance costs, and safety hazards. Therefore, it is important to use a suitable corrosion and fouling inhibitor to protect the metal surfaces from the corrosive and fouling agents present in the streams.

One of the products that can provide such protection is Chimec 1044, a highly effective oil and water phases corrosion and fouling inhibitor, oil soluble and water dispersible, film forming type. It is free of heavy metals or other catalysts poisons. Chimec 1044 provides a protective film on all contacted metal surfaces; this film controls fouling and corrosion due to HCl, H2S, O2, organic acids, CO2, HCN [^1^].

Chimec 1044 retains corrosion and fouling inhibition properties at high temperatures and in low pH systems. The product has practically no emulsification effect on treated streams. Typical application of Chimec 1044 is in the vapour lines of all refinery towers, where corrosion and fouling protection of overhead equipment and tower internals is necessary. Chimec 1044 is recommended at a dosage of 3-10 ppm, depending on the stream corrosiveness [^1^].

Some of the advantages of using Chimec 1044 are:

Soft, flexible film: Will not harden or crack, total protection assured.

Displaces moisture: No need to use separate de-watering fluid.

Film allows subsequent handling: Resists acid finger marking.

Resists the effects of high humidity: Versatile in use.

Chimec 1044 has a density of 0.915 + 0.01 gr/cc at 20C, a viscosity of < 50 cPs at 20C, a flash point of > 62 C (ASTM D-56), a pour point of < -30 C, and a shelf life of 24 months, min. It is soluble in hydrocarbons and organic solvents, but insoluble in water. It should be handled with care to avoid contact with skin and eyes, and prolonged breathing of vapours. It should be stored in a cool area away from heat and open flames [^1^].

Chimec 1044 is a product of Chimec S.p.A., a company that specializes in chemical solutions for oil refining, petrochemicals, gas processing, power generation, water treatment, and environmental protection. Chimec S.p.A. has been operating since 1973 and has offices in Italy, UK, France, Spain, Germany, Russia, UAE, India, China, Singapore, Brazil, Argentina, Mexico, and USA [^2^].

If you want to learn more about Chimec 1044 or other products from Chimec S.p.A., you can visit their website at https://www.chimec.it/ or contact them at:

Chimec S.p.A.

Via delle Ande, 19

00144 Roma

Tel. +39 (06) 91825.1

Fax +39 (06) 5918943

Email: info@chimec.it

[^1^]: Technical - Data - Sheet - Chemical - CH 1044 ING | PDF - Scribd

[^2^]: CHIMEC | Chemical Solutions for Oil Refining & Petrochemicals 66dfd1ed39

Delphi.distiller.v1.85.rar 28<br>solucionario de transferencia de calor, jose manrique.<br>OMRON CX-Supervisor v3.1..rar<br>