Embedded Files
Behind the IP
Behind the IP
Anomaly Island
Anomaly Island
Based on the show Lost. Guests set out on a yacht to see whales, dolphins, and reefs. But a storm turns unexpectedly and wrecks the yacht on a mysterious island. This island is the site of a secret lab that deals in animal cyborg experiments and guests must find a way out, riding a giant snake.
Guests experience the attractions preshow, being on a yacht, by means of a 6 Degree of Freedom platform mounted on a turntable. The following is a model of what the 6DOF platform may look like.
3D model on Solidworks
3D model on Solidworks
Model was made using 1:64 scale.
I based my design on the provided concept art and scaled measurements of the human body
It was also designed as a print in place model for a flash forge 3d printer.
3D printing the model
3D printing the model
After finishing modeling, the file was sent to a FDM 3D printer.
Aproximately 408.07g of PLA fillament was used for this model.
After printing, model had artifacts that prevented adhesion. Fast acting glue was used to fix physical model.
Initial concept of the interior of the motion simulator.
3D printed model – shown with the adhesion problem and broken barrier
Painting the Model
Painting the Model
Model was painted using citadel miniature paints.
Base, layer and contrast were used to represent the wooden floor, the upholstery and the metal poles and barriers.
Non guest viewing areas were painted in black.
A final coat of clear varnish was used to seal the colors.
Finished painted model
Page updated
Google Sites
Report abuse