How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a kids' headphone that works with both USB-C devices and anything with a standard 3.5mm jack, choose EarFun K1; if you need a true USB-C native headphone with three levels of volume limiting and a parent-friendly slider right on the earcup, choose awatrue USB‑C Kids Headphones. That's the short version. Below I break down where each wired headphone actually earns its place — and where it doesn't.
• EarFun K1 — biggest strength: flexible connectivity. It ships with a USB-C cable, plus a 3.5mm sharing jack so two kids can listen on one device without a splitter.
• EarFun K1 — biggest trade-off: volume limiting tops out at two settings (85/94dB), and there's no dedicated toddler-level option.
• awatrue USB‑C Kids Headphones — biggest strength: a three-step volume limiter (74/85/94dBA) with the slider mounted on the earcup, so parents can check the setting at a glance.
• awatrue USB‑C Kids Headphones — biggest trade-off: it's USB-C only. No 3.5mm jack, no sharing port, so older gear is off the table.
• Who each pick is for: EarFun K1 for families juggling mixed devices and siblings; awatrue for parents who want strict, easy-to-verify volume control on a USB-C-only setup.
The EarFun K1 is built around flexibility. It uses 40mm dynamic drivers with a 20Hz–20,000Hz frequency range, 32 ohm impedance and 100dB sensitivity — numbers that tell you it's easy to drive from a tablet, Chromebook or Switch without needing extra amplification. The over-ear design uses leather and plastic, weighs 180g, and the headband adjusts across head sizes, which matters when one pair has to survive from kindergarten through middle school.
What stands out to me is the audio sharing. The 3.5mm sharing jack lets a second pair of headphones plug straight into the K1, so two kids can watch the same tablet without a splitter cable. If you've ever refereed a fight over who gets the "good" earbud, that feature alone is worth thinking about. There's also an in-line remote with a microphone for online classes and calls — play/pause, track skip, answer/end. Button controls, no noise cancellation, straightforward operation.
Who should buy it: families with a mix of devices, kids who share screens, and anyone who wants one headphone that covers school Chromebooks, tablets and a car entertainment system. EarFun backs it with an 18-month warranty. Who should skip it: parents of very young toddlers who want a 74dB ceiling, or anyone who needs the volume control physically locked on the headphone itself. The K1's limiter gives you 85/94dB, which is fine for school-age kids but not the toddler-first design some parents are hunting for.
The awatrue HK07C is the more safety-forward of the two. Its headline feature is the three-level limiter at 74/85/94dBA, and awatrue states the 74dB step is aimed specifically at toddlers aged 2–4, following WHO guidance. Just as important as the numbers is where the control lives: a slider on the earcup. That's a genuinely better idea than an in-line remote for one practical reason — you can see the setting without unplugging anything or untangling a cable. In my opinion, that alone makes it easier to trust with a younger child.
The build leans comfort-first. Memory foam ear cushions, a lightweight frame, and an adjustable ergonomic headband that's meant to grow with the child. The materials are listed as skin-friendly and BPA-free, with CPC certification and CPSIA compliance for US children's product standards. Age range is stated as 3–12 years, and there's a 1-year warranty.
Connectivity is where you need to pay attention. This is a USB-C plug headphone — plug in and play with USB-C audio devices like school-issued Chromebooks, learning tablets, Kindles, smartphones, Switch and laptops. There is no 3.5mm jack. If your household still runs on aux cables, this isn't the pair for you.
Who should buy it: parents of toddlers and early elementary kids who want the strictest volume ceiling available here, and households that are fully USB-C. Who should skip it: anyone who needs to share audio between two listeners, or who wants one headphone to work with an older 3.5mm-only device.
Side-by-Side: Which Should You Choose?
• Best for the youngest kids → awatrue. The 74dB setting is the only toddler-specific level between the two.
• Best for parental volume control → awatrue. The earcup slider beats an in-line remote for quick checking.
• Best for siblings sharing one screen → EarFun K1. The sharing jack means no splitter and no extra purchase.
• Best for long listening sessions → awatrue. Memory foam cushions and a lightweight build are tuned for extended wear.
• Best for older kids and tweens → EarFun K1. The 85/94dB steps and adjustable headband suit school-age users better than a toddler-first limiter.
• Best for USB-C-only school setups → awatrue. It's purpose-built for Chromebooks, tablets and other USB-C audio gear.
• Best for durability against rough handling → EarFun K1. The materials are described as built to take twisting and pulling.
If I were buying for my own household, I'd pick the EarFun K1. The reason is simple: the sharing jack and dual connectivity solve more real-world problems — mixed devices, two kids on one tablet, gear that outlasts a single school year. I'd only switch to the awatrue USB‑C Kids Headphones if I had a toddler in the 2–4 range and wanted that 74dB ceiling with the slider I can verify at a glance. Both are sound choices; the deciding question is whether your priority is flexibility or strict volume control. If price is a factor, check the current price on Amazon for both before deciding.
how to connect usb c wired headphones
Plug the USB-C connector directly into a USB-C port that supports audio output — most modern phones, tablets, Chromebooks and laptops do. There's no pairing, no charging and no adapter needed. If nothing plays, the port may be data-only, so try another USB-C port on the device.
how to use usb c wired headphones on mac
Macs with USB-C ports accept these headphones as a standard audio output device. Plug them in, then open System Settings → Sound and select the headphone as the output (and input, if you want to use the mic). If your Mac only has USB-A ports, you'll need a USB-A to USB-C adapter.
how to connect usb wired headphones to xbox
Xbox controllers have a 3.5mm jack, not USB-C audio, so the EarFun K1 is the one that connects — run its 3.5mm cable into the controller. The awatrue is USB-C only, so it won't work directly with an Xbox controller without additional hardware.
how to connect usb wired headphones to macbook
Plug the USB-C plug into any USB-C port on the MacBook. Audio should route automatically; if it doesn't, choose the headphones manually under Sound settings. For the EarFun K1, you can also use its 3.5mm cable if your MacBook has a headphone jack.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Linsoul TANGZU Xue Tao vs KASOTT SoundMaster Pro V1, SYSFUN Single vs GZLMMY Color Screen, Avantree L171 vs Yunsailing 30, Philips USB-C vs MINISO X15