We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-23 · 6 min read · Independent comparison
If you want a more feature-dense open-ear earbud with hi-res codec support, AI translation and a physical button you can actually trust mid-run, choose EarFun Clip 2; if you need maximum water resistance and a lower-drama, hook-style fit for sweaty outdoor sessions, choose Conyat Open-Ear Headphones.
• EarFun Clip 2 — biggest strength: A clip-on C-bridge design with a 40° soft silicone bridge and 0.5mm nickel-titanium memory wire, plus LDAC/Hi-Res audio, a 12mm titanium-composite driver, 4 mics with AI noise cancellation, and real-time translation across 100+ languages.
• EarFun Clip 2 — biggest trade-off: IP55 only covers the earbuds, not the charging case, and running LDAC drops single-charge playtime from 11 hours to about 6.
• Conyat Open-Ear Headphones — biggest strength: IP7 water resistance, a 14.2mm dynamic driver, ENC mic, LED battery display on the case, and 8–10 hours per charge in a lightweight 6.7g-per-earbud hook design.
• Conyat Open-Ear Headphones — biggest trade-off: Touch controls instead of physical buttons, no hi-res codec mentioned, no multipoint, and a 2-hour full recharge versus EarFun's 10-minute fast-charge top-up.
• Who each is for: EarFun Clip 2 suits commuters, travellers and anyone who wants the most features per earbud; Conyat suits runners, cyclists and gym-goers who prioritise rain-and-sweat proofing above everything else.
The EarFun Clip 2 is the more ambitious product of the two. It clips onto the outside of your ear rather than hooking over it, using an upgraded C-shaped bridge that EarFun says was tested with 20,000+ flexes. The bridge combines 40° ultra-soft silicone with a 0.5mm nickel-titanium memory wire, so you can stretch and rotate it to match your ear shape. Each earbud weighs 5.5g, and nothing enters your ear canal — which matters if you have ever given up on earbuds because they ached after an hour.
On the audio side, a 12mm titanium-composite dynamic driver with a dual-magnetic circuit handles the low end, and LDAC plus Hi-Res Audio certification means supported Android phones can stream at higher bitrates than standard Bluetooth. EarFun Spatial Stage Technology widens the soundstage, and Directional Sound Tech keeps audio aimed at you while still letting traffic and announcements through. For calls, there are 4 microphones with AI-powered environmental noise cancellation, which is designed to pull your voice out of wind and background chatter.
Buy it if you want the richest feature set, physical push-button controls that won't misfire, and multipoint switching between a laptop and phone. Skip it if you train in heavy rain or need the charging case itself to survive getting soaked.
Conyat Open-Ear Headphones: Who It's For
The Conyat X5S takes the classic ear-hook approach. It is ergonomically shaped to contour your ear while leaving the canal completely open, and each earpiece weighs about 6.7g. In practice that means a fit you wear rather than clip, and Conyat leans hard into the comfort and situational-awareness argument: you hear your music and the world around you at the same time, which is the whole point of open-ear for cycling, running and walking near traffic.
Sound comes from a 14.2mm dynamic driver — physically larger than the EarFun's 12mm — paired with directional sound transmission to limit leakage and keep what you're listening to private. Calls use a single highly sensitive ENC noise-cancelling microphone that filters background noise, which is a simpler setup than EarFun's four-mic array but still aimed at office and on-the-go use.
The practical wins here are durability and battery visibility. IP7 water resistance is a step above IP55 and covers sweat and rain, so intense workouts and wet-weather jogs are squarely in scope. The charging case has an LED indicator showing its battery status, which is a small thing you appreciate daily. Playtime is 8–10 hours per charge depending on volume, 40 hours total with the case, and a full recharge takes about 1.5–2 hours over USB-C. Bluetooth 6.0 handles pairing, with auto-pairing when you lift the buds out of the case.
Controls are touch-based: power, play/pause, track skipping, calls, volume and more. No multipoint is mentioned, and there is no hi-res codec or translation feature.
Buy it if you sweat hard, run in the rain, or want a simple hook fit with a battery readout on the case. Skip it if you want multipoint, physical buttons, or higher-bitrate audio.
• Best for battery life per charge → EarFun Clip 2 (up to 11 hours, versus 8–10 hours on the Conyat).
• Best for hi-res audio and sound detail → EarFun Clip 2 thanks to LDAC, Hi-Res Audio certification and the 12mm titanium-composite driver.
• Best for water resistance → Conyat Open-Ear Headphones with IP7 versus IP55 (and EarFun's IP55 excludes the charging case).
• Best for control reliability → EarFun Clip 2, because physical push buttons don't misfire the way touch controls can when your fingers are wet or gloved.
• Best for device switching → EarFun Clip 2, which supports multipoint plus Google Fast Pair.
• Best for travel and language barriers → EarFun Clip 2, with real-time translation across 100+ languages in the app.
• Best for pure simplicity → Conyat Open-Ear Headphones, with auto-pairing, an LED case readout and no app dependency.
• Best for larger driver size on paper → Conyat Open-Ear Headphones at 14.2mm versus 12mm.
I would buy the EarFun Clip 2. In my opinion, the combination of LDAC and Hi-Res support, four-mic AI call handling, multipoint, physical buttons and app-based translation is a lot of real capability in one pair of open-ear buds, and the clip-on bridge with the memory wire is the more interesting fit solution of the two. The Conyat is the smarter pick only if rain and heavy sweat are your daily reality — IP7 is a genuine advantage there. But for most people, most of the time, I'd take the EarFun. Either way, check the current price on Amazon before deciding, since that is the one variable that can flip this call.
how to open ear headphones work
Open-ear headphones sit outside your ear canal instead of inside it. The EarFun Clip 2 clips onto your ear with a C-shaped bridge, while the Conyat X5S hooks over it. Both fire sound toward your ear while leaving the canal open, so you hear music and your surroundings at once.
how to wear open ear headphones
For the EarFun Clip 2, stretch and rotate the silicone-and-memory-wire bridge around your ear until it sits without pinching. For the Conyat, rest the hook over your ear so the driver sits just outside the canal. Neither should be pushed into your ear.
how to use open ear headphones
Pair over Bluetooth 6.0 — the EarFun supports multipoint and Google Fast Pair, the Conyat auto-pairs when removed from the case. Control playback with the EarFun's physical buttons or the Conyat's touch panel, and use the EarFun Audio App for translation and button customisation.
how to open ear headphones — is IP7 better than IP55?
Yes, in terms of water protection. The Conyat's IP7 rating covers sweat and rain, while the EarFun Clip 2's IP55 handles sweat, raindrops and splashes on the earbuds but excludes the charging case. For heavy rain or soaked workouts, IP7 is the safer bet.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: HAUSBELL Open Ear vs ZIDOXING Open Ear Bone, RR SPORTS IP68 vs XBONFIRE 5: Open Back Monitor Headphones, エレコム(ELECOM) EHP-GB100ARD vs Generic Over-Ear Headphones