For earbuds scratchy sound while DJing, I recommend MAXROCK Sleep Earbuds: their sound-isolating fit and wired 3.5 mm connection make them the clearest match here. Choose Soundcore if you want wireless listening and an open-ear option instead.
• MAXROCK Sleep Earbuds — best for wired listening in noisy spaces; pick this if you want soft silicone earplugs, sound isolation, and an in-line mic and volume control.
• MAXROCK Sleep Earbuds — best for a simple, compact wired setup; pick this if the white version and its stated 120 mm cord suit your listening arrangement.
• Anker Soundcore AeroFit 2 — best for switching between awareness and noise reduction; pick this if you want wireless open-ear and active noise-cancelling modes.
The first MAXROCK is a wired in-ear model with soft silicone earplugs, a microphone, and in-line volume and playback controls. For someone searching for earbuds scratchy sound, the main point is its sound-isolating design: the earplug-style tips are intended to reduce surrounding noise, which may make music easier to follow in a busy room. Its 3.5 mm plug also suits devices with a compatible headphone jack.
That combination makes it the strongest fit of these three for a DJ who specifically wants wired earbuds. A cable avoids relying on a wireless connection, and the earplug shape is a more direct choice for reducing environmental noise than an open-ear design. The inline controls are useful when a phone or player is tucked away: the listing describes volume adjustment, calls, and track control at the cable. I would still check that your DJ equipment has a compatible 3.5 mm output before choosing it.
The soft silicone and ergonomic in-ear shape are intended for extended wear, and the product is also presented for side sleeping, travel, and concentration in noisy settings. That points to a different kind of comfort than an over-ear cup or a headband: these sit in the ears, so they may appeal to someone who dislikes bulky gear around the head. The sound specifications include a 20 Hz to 20 kHz frequency range and 16-ohm impedance, but those figures alone do not establish how the earbuds will sound with every source or in every room.
How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-13 · 6 min read · Independent comparison
The second MAXROCK listing is also a wired pair of soft, noise-isolating sleep earbuds with a microphone and cable controls. It is a close alternative to the first product, not a fundamentally different style of headphone. The listed version is white and uses a 3.5 mm plug, which can work with compatible phones, computers, and audio players that provide that jack.
For everyday listening, its earplug-like shape is designed to sit in the ear and reduce some surrounding sound. The product description emphasizes soft silicone and a fit intended for comfort during long stretches. That may suit someone listening while working, travelling, or settling down to rest. The controls are described for adjusting volume, managing playback, and taking calls, so basic listening actions do not have to be handled on the connected device.
There is a useful detail for buyers comparing cable arrangements: this listing specifies a 120 mm cord. Check that measurement against the distance between your audio source and where you plan to wear the earbuds; a short cable could be inconvenient if the source is farther away. The sheet also gives a 20 Hz to 20 kHz frequency range and 16-ohm impedance. These are technical descriptors, not a guarantee that the sound will suit every listener or every DJ setup.
I rank this behind the first MAXROCK because the core design and use case are very similar, while the stated cord length makes fit with a particular setup worth checking carefully. It is not a neckband, and it is not a best comfortable headband headphones for dj option. If you specifically want a lightweight wired earbud rather than a headband or ear cup, this version may still make sense, provided its cable length and plug match your equipment.
Anker Soundcore AeroFit 2
For daily use, the ear hooks and soft liquid-silicone elements are designed to provide a pressure-free fit. The product sheet states up to seven hours per charge in open-ear mode and up to five hours in ANC mode, with longer combined listening figures when using the charging case. Those figures vary with the selected mode and other settings, so they are best treated as stated operating estimates rather than a promise for every session. The wireless design also means there is no 3.5 mm jack, a meaningful limitation for DJ equipment that expects a wired headphone connection.
Its 11.8 mm drivers, LDAC support, and spatial-audio features offer more listening options than the two simple wired MAXROCK models. ANC may help reduce everyday background noise, while open-ear mode can be useful when hearing the surrounding environment matters. The listing also describes four-microphone call support and water resistance rated IP55. These features point toward commuting, workouts, and general mobile listening, rather than a product designed specifically for booth monitoring.
The main trade-off is that this is not a sealed in-ear design, and its wireless connection may not suit a wired DJ workflow. Its open-ear mode also serves a different purpose from earbuds designed to isolate surrounding noise. I would choose it for flexible everyday listening, not as my first pick for someone searching for earbuds scratchy sound with DJ use in mind. If you want a wireless ear-hook design with the option to switch between awareness and noise reduction, though, it is the most versatile style in this group.
We compared the published specifications and features, focusing on fit, connection type, controls, and stated listening modes. The order is my independent editorial opinion based on how well each design fits the stated use cases. No brand paid for placement.
A scratchy sound can come from different sources, including the audio file, connected device, cable, jack, or earbuds. These product specifications do not identify or diagnose a particular cause. Check the connection and try another source to narrow down where the noise begins.
In my opinion, the first MAXROCK is the clearest match if you want wired, sound-isolating earbuds and your equipment has a compatible 3.5 mm jack. None of these listings describes a dedicated DJ-monitoring feature set, so confirm the connection and fit you need before choosing.
No. Both MAXROCK options are in-ear earbuds, and the Soundcore model uses open-ear hooks. If you specifically want over-ear headphones for dj monitoring, these products do not match that form factor.
No neckband design is listed. The MAXROCK models are wired earbuds, while the Soundcore model is wireless with adjustable ear hooks. A shopper seeking the best neckband headphones for dj use would need a separate neckband product.
• our ANSTEN Headphones vs Audiovance Vibes 202 pick
• TREBLAB C7-Pro vs BUGANI Open Ear Earbuds
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.