We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-28 · 8 min read · Independent comparison
If you want one pair of wired over-ear headphones that plugs into a TV and stays plugged in without a battery or a charging routine, choose DUNGZDUZ 20Ft; if you need compact in-ear wired earbuds with a microphone for calls and a Lightning connection for an iPhone, choose iMangoo Apple MFi-Certified Soft.
• DUNGZDUZ 20Ft — biggest strength: a 20-foot cord plus three connection paths (3.5mm AUX, RCA adapter, USB-A adapter), so it can reach most TVs — new or old — without an extension cord and without pairing.
• DUNGZDUZ 20Ft — biggest trade-off: it is over-ear, bulky, listen-only, and it has no built-in microphone. It is not a phone accessory.
• iMangoo Apple MFi-Certified Soft — biggest strength: true in-ear portability with a microphone, a hard EVA carrying case, and three sizes of ear tips for gym, commuting and calls.
• iMangoo Apple MFi-Certified Soft — biggest trade-off: the connector is Lightning, so it will not fit USB-C iPhones (including 15, 16 and 17 series) without an official USB-C to Lightning adapter. The cable is short and it does not plug into a TV.
• Choose DUNGZDUZ 20Ft if you want corded headphones for TV, movie and series listening — especially for seniors who want plug-and-play simplicity.
• Choose iMangoo Apple MFi-Certified Soft if you want a pocket-size wired earbud for an iPhone with a Lightning port, and you want to talk on calls without holding the phone.
This is a purpose-built TV headphone, and the whole design points that way. The cable runs 20 feet, which is the difference between sitting on the couch with slack in the cord and perching awkwardly next to the TV stand. The over-ear oval pads sit around the ear rather than on it, and the ABS frame keeps the weight at 300 grams. Inside are dual 40mm NdFeB dynamic drivers with a 32-ohm impedance, a 20 Hz to 20 kHz frequency range and 103 dB sensitivity. In plain terms, that is a normal, easy-to-drive headphone load — no amplifier required, which is exactly what you want when the source is a television's audio out.
The three-way input is the real story. There is a 3.5mm AUX jack on the headphone itself, plus an RCA-to-3.5mm adapter for older TVs and a USB-A to 3.5mm adapter for newer smart TVs that dropped the analog headphone jack. Whichever port your TV has, one of the three paths should fit. Volume is handled by an inline rolling wheel, and the sound isolation comes from the closed over-ear fit, so dialogue stays with you instead of the whole room.
Who should buy it: anyone who wants to watch TV late without waking the house, and older viewers in particular. There is no pairing, no charging, no menu to fight — you plug in and listen. What you should know before ordering is that this is a listen-only headphone. There is no microphone, so it is not a headset for calls. And not every TV enables audio out automatically: some require you to switch the sound output to headphones, line out or external speaker in the TV's audio settings, and some only send RCA audio when the internal speakers are off. If you are unsure whether your TV plays along, confirming your TV's ports and audio-out settings before purchase is the sensible move — the listing itself recommends contacting the seller to check compatibility. If your TV only offers a fixed-level RCA output with no volume option, you may need a headphone amplifier to boost that signal.
Skip it if you want earbuds for the gym, a mic for phone calls, or something that fits in a pocket. This is a living-room headphone.
This is the opposite kind of product: small, light, and built around one phone. The earbuds are in-ear with rounded tips, and the package includes three sizes of ear buds so you can find a seal. The drivers are 10mm dynamic units with 32-ohm impedance, 20 Hz to 20 kHz frequency range and 114 dB sensitivity. That higher sensitivity number matters for a phone: it means these earbuds get loud easily from a phone's own output, so you are unlikely to run out of volume in a noisy gym or on a train.
The connector is a Lightning plug, and the model is described as using an MFi-certified chip for Apple devices. Volume is controlled by buttons on the cord, and the control method is listed as app and remote, so you can adjust playback without digging the phone out of a pocket. There is a microphone, which is the fundamental difference from the DUNGZDUZ set — this is a headset, not just a headphone.
The compatibility caveat is the single most important thing to understand here. These are for iPhones with a Lightning port, such as the 14 Plus, 13, 12 and 11 Pro Max generation. They will not work with USB-C iPhones — including the 15, 16 and 17 families — unless you supply an official USB-C to Lightning adapter, and there is a separate USB-C version of the earphone if your phone has moved on. The brand also notes a USB-C variant exists, which is the cleaner answer if you are on a newer iPhone.
The included hard EVA case is a genuinely useful touch. It replaces the throwaway pouch with something that keeps the cable from becoming a knot in your bag. Between the case, the ear tips and the inline mic, this reads as a commuter and workout earbud rather than a desk accessory. The warranty is listed at 8 months manufacturer.
Side-by-Side: Which Should You Choose?
• Best for TV listening → DUNGZDUZ 20Ft. Dedicated TV headphones with a 20-foot cord and 3.5mm, RCA and USB-A input paths.
• Best for reaching across the room → DUNGZDUZ 20Ft. 20 feet of cable means you can sit anywhere on the couch. The iMangoo set is a short, phone-length cord.
• Best for phone calls and voice → iMangoo Apple MFi-Certified Soft. It has a built-in microphone. The DUNGZDUZ explicitly does not.
• Best for portability → iMangoo Apple MFi-Certified Soft. In-ear, plastic, white, with a hard EVA case and three ear tip sizes.
• Best for older TVs → DUNGZDUZ 20Ft. The RCA adapter covers legacy sets; the USB-A adapter covers newer smart TVs that lost their headphone jack.
• Best for older users who want zero setup → DUNGZDUZ 20Ft. Plug and play, no battery, no pairing, inline rolling-wheel volume.
• Best for noisy environments → it's close, but iMangoo Apple MFi-Certified Soft. In-ear tips seal the ear canal, and the 114 dB sensitivity means plenty of headroom. The DUNGZDUZ relies on over-ear pad isolation at 103 dB.
• Best if you own a USB-C iPhone → iMangoo Apple MFi-Certified Soft, but only the USB-C version (or the Lightning model with an official adapter).
In my opinion, these two do not really compete — they solve different problems, and the "right" one depends entirely on what you plug into. If your goal is watching television without disturbing anyone else, the DUNGZDUZ 20Ft is the pick I would make: the 20-foot cord, the three input options and the no-battery, no-pairing design are exactly what a TV headphone should be, and the over-ear pads with 40mm drivers suit long viewing sessions. If your goal is a wired earbud for an iPhone with a microphone and a case you can throw in a bag, the iMangoo set is the more sensible buy — provided your phone has a Lightning port. For a single recommendation to the typical reader searching this comparison, I would take the DUNGZDUZ 20Ft, because it does something a phone earbud cannot do at all. Check the current price on Amazon before you decide, and confirm your ports first.
how to wired headphones work
A wired headphone turns an electrical audio signal into sound through its drivers. In the DUNGZDUZ 20Ft that signal arrives over a 3.5mm AUX, RCA or USB-A path into 40mm dynamic drivers; in the iMangoo set it arrives over a Lightning connector into 10mm dynamic drivers. Either way, no battery and no pairing are involved.
how to use wired headphones with iphone
You need a connector that matches your iPhone's port. The iMangoo Apple MFi-Certified Soft uses a Lightning plug, so it fits Lightning iPhones directly, including the 14 Plus, 13, 12 and 11 Pro Max generation. On USB-C iPhones such as the 15, 16 and 17 series, you need an official USB-C to Lightning adapter, or the USB-C version of the earphone.
how to wired headphones
Plug the connector into the matching port, then play audio. With the DUNGZDUZ 20Ft, plug into 3.5mm AUX, RCA or USB-A and set your TV's sound output to headphones, line out or external speaker if you hear nothing. With the iMangoo set, plug into the Lightning port and use the inline buttons for volume.
how to fix wired headphones no sound
Work through the chain in order. Check that the plug is fully seated and that you are using the right port. On a TV, verify the audio output setting — some sets only enable RCA audio when internal speakers are off, and some offer only a fixed output level that may need an amplifier. On an iPhone, confirm the phone is charging and playing through the correct output.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Joysico 19.5Ft vs Voarmaks M50X, Amazon Renewed TREBLAB Z2 vs Gabba Goods Over-Ear Headphones, Sony WH1000XM4 vs Jabra Evolve2: Premium Headphones, SRICH Earbuds vs TOZO OpenEarRing Open Ear: Earbuds with