Complete Heating and Cooling Services in Dublin
When your AC struggles in Dublin, you’ll feel it fast—warm air from vents, weak airflow, uneven cooling upstairs, or a system that runs all day without reaching the set temperature. We diagnose the root cause and repair it correctly so your system cools efficiently and reliably.
Common AC problems we repair:
AC blowing warm air or not cooling enough
Weak airflow from vents
Uneven cooling (hot rooms / cold rooms)
Frozen evaporator coil (ice buildup indoors)
Outdoor condenser not turning on or shutting off
Electrical issues (capacitors, contactors, relays, wiring)
Thermostat and sensor problems
Water leaks from clogged condensate drain lines
What’s an evaporator coil?
The evaporator coil is the indoor coil that absorbs heat from your home. If it’s dirty or frozen, cooling performance drops and leaks can happen when ice melts.
What’s a capacitor?
A capacitor helps the compressor and fan motor start and run. When it fails, you may hear buzzing or clicking, and the unit may struggle to turn on.
AC Installation and Replacement
In a hot area like Dublin, correct sizing is critical. An undersized system may run nonstop and still feel warm. An oversized system may cool too fast and shut off before it spreads comfort evenly, which can create hot/cold spots.
Our AC installation process typically includes:
Proper sizing (comfort + efficiency, no guessing)
Duct and airflow evaluation for central systems
Thermostat setup and calibration
Full performance testing after installation
What is short cycling?
Short cycling is when your AC turns on and off too often. It’s often caused by oversizing, airflow restrictions, thermostat placement issues, or failing components. It reduces efficiency and increases wear.
Heating Services in Dublin
Even with warm summers, Dublin winter mornings can feel cold. If your furnace won’t start, blows cool air, or shuts off early, we’ll diagnose the issue and restore safe, dependable heat.
Common furnace problems:
Furnace not turning on / no heat
Heater blowing cool air
Weak airflow and uneven heating
Loud noises (rattling, banging, squealing)
Burning smell that doesn’t fade quickly
Frequent cycling on/off
Thermostat and control board issues
Ignition and safety sensor problems
What’s a flame sensor?
A flame sensor confirms the burner flame is present. If it’s dirty or failing, the furnace may ignite briefly and then shut down as a safety response.
Furnace Installation and Replacement
A furnace replacement may make sense if:
Repairs are becoming frequent and costly
The unit is older and less efficient
Heating is uneven between rooms
You want quieter operation and improved comfort control
We help you choose the right system size and install it for safe, reliable performance.
Heat Pumps and Energy-Efficient HVAC Options in Dublin
Heat pumps are increasingly popular in Dublin and the Tri-Valley because they provide both heating and cooling in one system and can be very efficient when sized and installed properly.
We provide:
Heat pump installation and replacement
Heat pump repair and maintenance
Ducted heat pump systems (central HVAC style)
Ductless mini-split systems for zoned comfort
What’s a ductless mini-split?
A mini-split is a ductless system with an outdoor unit connected to one or more indoor units. It’s ideal for home offices, additions, converted garages, and rooms that need separate temperature control—especially in homes with comfort problems upstairs.
Ductwork Services and Airflow Improvements in Dublin
Airflow problems can make a good HVAC system feel weak—especially during peak heat. Leaky or damaged ducts often cause hot rooms, uneven comfort, and higher energy bills because cooled air escapes before it reaches your living space.
Duct services include:
Duct sealing to reduce air leakage
Repairing disconnected or damaged duct runs
Replacing collapsed or deteriorated flex duct
Improving airflow to upstairs and hot rooms
Duct insulation recommendations (as needed)
Why duct sealing matters:
Leaky ducts can dump conditioned air into attic or crawlspace spaces instead of delivering it into your rooms. Sealing improves comfort and reduces strain on your HVAC system.
What’s a return vent?
A return vent pulls indoor air back into the HVAC system to be cooled or heated again. If returns are blocked or undersized, airflow suffers and comfort becomes uneven.
HVAC Maintenance and Tune-Ups in Dublin
Preventive maintenance helps reduce breakdowns, improve efficiency, and extend equipment life. In Dublin, tune-ups before peak summer heat can help your system run stronger when it matters most.
A typical HVAC tune-up may include:
Electrical inspections and tightening connections
Testing capacitors, contactors, and safety controls
Outdoor coil inspection/cleaning (as needed)
Blower motor inspection and airflow checks
Drain line inspection and clearing to prevent leaks
Temperature split measurement (performance check)
Thermostat testing and cycle evaluation
Temperature split explained simply:
It’s the difference between the air temperature entering your system and the air temperature coming out through your vents. It helps confirm whether your system is cooling/heating effectively.
When it’s hot outside, homes stay closed up more—trapping dust, allergens, and stale air indoors. Better filtration and airflow improvements can help your indoor air feel cleaner and your system run more smoothly.
We can help with:
Filter recommendations matched to your HVAC system
Airflow balancing to reduce stuffy rooms
Maintenance plans that keep internal components cleaner
Optional IAQ improvements when appropriate
Filter tip:
Higher-rated filters can improve air quality, but if they restrict airflow too much, they can reduce HVAC performance. The best filter balances filtration and airflow for your system.
Call for HVAC service if you notice:
AC blowing warm air or not keeping up in the afternoon
Uneven temperatures between rooms (especially upstairs)
Weak airflow from vents
Frozen coil or water leaks around the indoor unit
Strange noises (buzzing, grinding, rattling, banging)
Furnace not heating or shutting off early
Frequent cycling or nonstop operation
Rising energy bills without explanation
Thermostat settings don’t match comfort
Honest diagnostics and clear recommendations
Repair vs. replace guidance without pressure
Focus on airflow, comfort, and efficiency
Clean, respectful work practices
Options that match your goals and budget
Need HVAC repair, installation, or maintenance in Dublin? We’re ready to help you stay comfortable with reliable service and straightforward communication.
• Bay Area • San Jose • Sunnyvale • Santa Clara • Mountain View • Milpitas • Palo Alto • Cupertino • Gilroy • Morgan Hill • Campbell • Saratoga • Los Gatos • San Mateo • Daly City • Redwood City • South San Francisco • San Bruno • Pacifica • Foster City • Menlo Park • Burlingame • San Carlos • Oakland • Fremont • Hayward • Berkeley • San Leandro • Livermore • Pleasanton • Alameda • Dublin • Union City