Low Signal Strength After DStv Installation? Here Is How To Fix It!

Have you been missing out on your favourite show due to the poor signal strength of your DStv? If your answer is yes, you have come to the right corner.

Improper DStv installation in Bellville can cause your decoder to lose signal. As a result, your TV may show either freezing pictures. The smartest thing to do in this instance would be to call a pro to fix the issues.

But if you can’t get a hold of an expert at the moment, you can follow the next section!

How To Deal With Low Signal Strength After DStv Installation In Bellville?

You can improve your DStv signal power by ensuring that the satellite dish and LNB are in-line. Here’s what to do when you face low signal strength:

• Look for incorrectly connected F-type connectors on the back of the decoder and LNB. However, it can be risky if you don’t have the proper knowledge. So, discuss it with an accredited service provider of DStv installation in Bellville first.

• If your LNB is not in proper alignment, it can also cause weak signal strength. If you call a pro, they can arrange it at a skew angle concerning the polarity of the signal, the selected satellite and your local position.

• The specialist can align your satellite dish by adjusting the horizontal and elevation angle. Another thing that can cause a weak signal is faulty LNB. Additionally, obstructions such as trees and buildings can also disrupt your signal.

Call Accredited Pros For DStv Installation In Bellville

Proper DStv installation in Bellville and alignment are the first step in enjoying good signal strength in your DStv. And for that, you can rely on DStv Cape. They will provide you with technical support across the year with unlimited broadband. You may visit dstv-cape.co.za to learn more about them.