Patents Granted:
Laser Assisted Processing of Aluminium Alloy Composites for Automotive Brake Pad.
Application No; 201941038438
Date of Publication: 24-09-2019
Date of Grant: 01-02-2024
Method for Surface Modification in Graphene-Aluminium Alloy Nano-Composites Using Low Energy Laser Shock Peening.
Application No; 201741034931
Date of Publication: 03-10-2017
Date of Grant: 14-12-2023
Books & Chapters Published
Chapter entitled "Tribological Aspects of Graphene-Aluminum Nanocomposites" in the book "Graphene Materials - Structure, Properties and Modifications" published by INTECH Publishers, Croatia. http://dx.doi.org/10.5772/67475, ISBN 978-953-51-3140.
Chapter entitled "Processing of Graphene / CNT - Metal powder" in the book "Powder Technology" published by INTECH Publishers, Croatia. http://dx.doi.org/10.5772/intechopen.76897, pp. 45 - 63.
Chapter entitled "Particle reinforced nanocomposites, interfaces, strength and tribological properties depending on the reinforcement type" published by "Elsevier - Woodhead Publishing Series in Composites Science and Engineering", UK., ISBN: 978-0-08-102665-6, pp 495 - 511. https://doi.org/10.1016/B978-0-08-102665-6.00018-2.
Kumar, H.G. Prashantha and Xavior, M. Anthony (2021) Composite Materials Production for Automobile Applications. In: Brabazon, Dermot (ed) Encyclopedia of Materials:Composites. vol. 2, pp. 640–651. Oxford: Elsevier. http://dx.doi.org/10.1016/B978-0-12-803581-8.11894-6.
Ajithkumar, J.P. and Xavior, M. Anthony (2021) Processing Methods and Property Evaluation of CNT Based Metal Matrix Nano-Composites. In: Brabazon, Dermot (ed) Encyclopedia of Materials: Composites. vol. 2, pp. 542–558. Oxford: Elsevier. http://dx.doi.org/10.1016/B978-0-12-803581-8.11878-8
Jayaram Dasari1 and M. Anthony Xavior (2026), Review of additive manufacturing and post processing techniques for aluminium alloys with focus on microstructure changes mechanical performance and emerging trends, Discover Mechanical Engineering, Vol. 5 (48). https://doi.org/10.1007/s44245-026-00189-9.
Baskar Amaladosan, Anthony Xavior M., Anna Burduk, Suthep Butdee (2026), Solving Minimum Covering Circle/ Dome Problem Using Four or More Boundary Points of the Given Cluster, Vol. 354, EPJ Web of Conferences. https://doi.org/10.1051/epjconf/202635402008.
Sergey Sychev, Andre Batako, Katarzyna Antosz, Thanh Trung Nguyen, M. Anthony Xavior, Suthep Butdee (2026), From PC to AI Through Digital Twins - A glance into the Race for Technological Ideology, Vol. 354, EPJ Web of Conferences. https://doi.org/10.1051/epjconf/202635404001.
Arivazhagan Anbalagan, John E Graves, Oliver James Curnick, Danijela Rostohar, Margret Anouncia Savarimuthu, Anthony Xavior Michael, Rajkumar Soundarapandiyan, Jeyapandiarajan Paulchamy and Mythili Thirugnanam (2026), SEM images data set development of ML models to predict hydrogen embrittlement in welded 316 L/304 L stainless steels, Manufacturing Letters, Vol. 47, pp 51 – 57.
Baskar Amaladosan, Anthony Xavior M., Anna Burduk, Suthep Butdee, Jose Machado (2026), A Randomized Insertion-Based Trigonometric Algorithm (RITA) or Permutation Flowshop Scheduling Problems, Lecture Notes in Networks and Systems, Vol. 1779. Springer, Cham. https://doi.org/10. 1007/978-3-032-14163-7_3.
Suthep Butdee, Khompee Limpadapun, Anan Sopin, Anthony Xavior M., Anna Burduk (2026), Prediction Model for Defect Types on MIG Welding Process of the Aluminium 6061 Using Neuro-Fuzzy System and Logistic Regression Analysis, Lecture Notes in Networks and Systems, Vol 1779. Springer, Cham. https://doi.org/10.1007/978-3-032-14163-7_14.
Vinothraj U T., Joel J., Jeyapandiarajan P., Ashwath P., Anthony Xavior M., Andre Batako (2025), Experimental Investigation and Finite Element Analysis of AISI 316L Manufactured by Laser Powder Bed Fusion, LNME pp: 283 – 295, https://doi.org/10.1007/978-3-031-93554-1_25
Vinothraj U T., Joel J., Jeyapandiarajan P., Anthony Xavior M., Ashwath P., Andre Batako (2025), Effect of Heat Treatment on the Microstructure and Grain Boundary Characteristics of AISI 316L Produced Using the Powder Bed Fusion Technique, LNME pp: 77 – 88, https://doi.org/10.1007/978-3-031-99159-2_6
A.D.L. Batako, J. Ahuir Torres, A. Meredith, M.A. Xavior, K. Antosz, N. Bakradze (2025), Brake Disc Surface Modification with Laser Hardening to Reduce Particulate Pollutants, Journal of Physics: Conference Series 012018, https://iopscience.iop.org/article/10.1088/1742-6596/3160/1/012018.
Balaji V, Jeyapandiarajan P, Joel J, Ashwath P, Andre Batako, Anthony Xavior M (2025), 3D Printed High-Entropy Alloys (HEAs) for Hydrogen Storage Systems: Characterization and Evaluation of Hydrogen Embrittlement, Journal of Physics: Conference Series 012025, https://iopscience.iop.org/article/10.1088/1742-6596/3160/1/012025
Dagmara Łapczyńska, Anthony Xavior M., Pichai Janmanee (2025), Fuzzy Logic in Risk Assessment of Machines Failures, Journal of Physics: Conference Series 012013, https://iopscience.iop.org/article/ 10.1088/1742-6596/3160/1/012013
Madhu Venkataraman, Saravanaguru RA K, Anthony Xavior M, Thirumalaivasan R, Balasubramanian V and Vijayakumar T (2025), Leveraging Q- Learning Models within a Web-Based OBE Platform for Enhanced Student Learning Outcome Verification, Journal of Physics: Conference Series 012024, https://iopscience.iop.org/article/10.1088/1742-6596/3160/1/012024
AjithKumar J P, Sreeram H, Anthony Xavior M, Anna Burduk, Andre Batako., (2025), Prediction of Cutting Force and Surface Roughness of AA7075-Based Hybrid Nano Composites in Turning Using Mathematical Modelling, Journal of Physics: Conference Series 012005, https://iopscience.iop.org/article/10.1088/1742-6596/3160/1/012005
Bharathiraja P, Anthony Xavior M., (2025), Assessing the effect of heat treatment and tempering conditions on the properties of graphene/B4C reinforced Al6061 composites, Advances in Materials and Processing Technologies, https://doi.org/10.1080/2374068X.2025.2573070
V. Balaji, P. Jeyapandiarajan, J. Joel, P. Ashwath, Batako Andre, Pitchaimuthu Sudhagar, M. Anthony Xavior.,(2025), Embrittlement behaviour of metal additive-manufactured high-entropy alloy components under gaseous and electrochemical hydrogen charging, Journal of Materials Research and Technology, Vol. 39, pp 3927 – 3947.
Venkatraman M., Anthony Xavior M., Ashwath P. and Andre Batako (2025), Residual Stress Evolution of Graphene-Reinforced AA2195 (Aluminum–Lithium) Composite for Aerospace Structural Hydrogen Fuel Tank Application, Journal of Composites Science, Vol. 9 (369). https://doi.org/10.3390/jcs9070369
Bharathiraja P., Ashwath P., Anthony Xavior M., Sudhagar Pitchaimuthu, and Andre Batako (2025), Effect of T6 and T8 Ageing on the Mechanical and Microstructural Properties of Graphene-Reinforced AA2219 Composites for Hydrogen Storage Tank Inner Liner Applications, Journal of Composites Science, Vol. 9 (38). https://doi.org/10.3390/jcs9070328
V. Balaji, M. Anthony Xavior, Jose Machado, Anna Burduk and Suthep Butdee (2025), Microstructure and thermal stability of Fe35Co20Cr20Ni20Mn5-based High Entropy Alloy processed through mechanical alloying, LNME, pp. 1–11. https://doi.org/10.1007/978-3-031-93554-1_1
Kamil Musial, M. Anthony Xavior, Suthep Butdee and Anna Burduk (2025), Machine Learning approach in quality control problem, LNME, pp. 13 – 23, https://doi.org/10.1007/978-3-031-94223-5_2
V. Balaji, A. Arivazhagan, M. Anthony Xavior (2025), Interaction of MWCNTs and GNPs with the elements on the development of equiatomic Fe25Co25Cr25Cu25 High Entropy Alloys (HEAs), Results in Engineering, Vol. 26, 105522.
Madhankumar, J. Joel, P. Jeyapandiarajan, P. Ashwath, M. Anthony Xavior (2025), Synthesis and Characterization of boron nitride reinforced alumina ceramic composites, Diamond &Related Materials, Vol. 156, 112396.
Nugzar Khidasheli, Salome Gvazava, Garegin Zakharov, Mikheil Chikhradze, Andre D L Batako, Juan Ignacio A T, P. Ashwath, M. Anthony Xavior (2025), Effect of Heat Treatments on the Microstructure, Corrosion Resistance and Wear Behaviour of Bainitic/Martensitic Ductile Iron Under Dry Sliding Friction, Journal of Manufacturing and Materials Processing, Vol. 9 (145), https://doi.org/10.3390/jmmp9050145
Balaji V., Arivazhagan A., Anthony Xavior M., (2025), Phase structure, microstructure and mechanical properties of FeCoCrNi-based eutectic high-entropy alloys reinforced with MWCNTs and Gr., Journal of Science: Advanced Materials and Devices, Vol. 10, 100868.
M. Venkatraman, M. Anthony Xavior (2025), Microstructural study and property evaluation of graphene reinforced AA2195 metal matrix composites, Results in Engineering, Vol. 25, 104492.
Bharathiraja P, Anthony Xavior M., (2025), Effect of T6 Tempering on the Wear and Corrosive Properties of Graphene and B4C Reinforced Al6061 Matrix Composites, Journal of Manufacturing and Materials Processing, Vol. 9 (82), https://doi.org/10.3390/jmmp9030082.
U. T. Vinothraj, M. Anthony Xavior (2025), Effect of heat treatment on tribological properties of AISI 316L manufactured through selective laser melting, Journal of Materials Research and Technology, Vol. 35, pp 7180 – 7192.
Madhankumar A., Anthony Xavior M., (2025), Mechanical and microstructural characterization of graphene reinforced Alumina Ceramic matrix composite, Results in Engineering, Vol. 25, 103942.
Sergey Sychev, Andre Batako, ThanhTrung Nguyen, Anthony Xavior, Katarzyna Antosz, Jose Machado (2024), An investigation into connection between BIM and Digital Twins technologies, IFAC-Papers OnLine, Vol 58(8), pp 234-239, https://doi.org/10.1016/j.ifacol.2024.08.126
M. Venkatraman, M. Anthony Xavior (2024), Property evaluation of graphene - reinforced Al-Cu-Li (2195) alloy for lightweight structural applications, Heliyon, Vol. 10 (23), e40706, DOI: 10.1016/j.heliyon.2024.e40706
V. Balaji, P. Jeyapandiarajan, J. Joel, Arivazhagan Anbalagan, P. Ashwath, S. Margret Anouncia, Andre Batako, and M. Anthony Xavior, (2024), Mitigating hydrogen embrittlement in high-entropy alloys for next-generation hydrogen storage systems, Journal of Materials Research and Technology, Vol. 33, pp 7681– 7697.
S. Butdee, P. Srikhumsuk, P. Phuangsalee, A. Burduk, M.A. Xavior, A.D.L. Batako (2024), Multilevel modelling of sustainable consumption for achieving carbon neutral production – case study of the urban in Thailand, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 124/2, pp 65-77. DOI: https://doi.org/10.5604/01.3001.0054.7760
Vinothraj U T and Anthony Xavior. M (2024), Grain boundary behaviour and impact fractography of cryogenic treated AISI 316l manufactured by laser powder bed fusion, Materials Letters, Vol. 377, 137413. https://doi.org/10.1016/j.matlet.2024.137413
P. Ashwath, M. Venkatraman, Alicia Patel, M. Anthony Xavior, Andre Batako (2024), Innovation in sustainable composite research: Investigating graphene-reinforced MMCs for liquid hydrogen storage tanks in aerospace and space exploration, Journal of Materials Research and Technology, Vol. 33, pp 4313–4331. https://doi.org/10.1016/j.jmrt.2024.10.070
Joanna Kochanska, Kamil Musiał, Dagmara Łapczynska, M. Anthony Xavior, P. Jeyapandiarajan (2024), A hybrid method for the intelligent effectiveness management of production operators, Annals of Operations Research, https://doi.org/10.1007/s10479-024-06166-3
Venkatraman Manokaran and Anthony Xavior Michael (2024), Property Evaluation of AA2014 Reinforced with Synthesized Novel Mixture Processed through Squeeze Casting Technique, Journal of Manufacturing and Materials Processing, Vol. 8 (153), https://doi.org/10.3390/jmmp8040153
Grzegorz Iskierka, Bartosz Poskart, Kamil Krot, Bolesław Telesi´nski, and M. Anthony Xavior (2024), Application of Graph Theory in Designing the Communication System of a Robotic Production Cell, LNME, pp. 71–78, https://doi.org/10.1007/978-3-031-61575-7_7
Vinothraj Usha Thangaraju, Joel Jayaseelan, Sai Srish Srinivasan, and Anthony Xavior Michael (2024), Finite Element Analysis and Experimental Study of ss316l Manufactured by Powder Bed Fusion, LNME, pp. 254–266, https://doi.org/10.1007/978-3-031-62684-5_23
V. Balaji, M. Anthony Xavior, P. Jeyapandiarajan, JoseMachado, Andre Batako, J. Joel, and Anna Burduk (2024), Development of Light-Weight High Entropy Alloys for Aerospace Applications: Perspective of Artificial Intelligence, LNME, pp. 139–150, https://doi.org/10.1007/978-3-031-62684-5_13
Ashwath Pazhani, Syed Saad Salman, M. Venkatraman, Alicia Patel, M. Anthony Xavior, Andre Batako, Jeyapandiarajan Paulsamy and Joel Jayaseelan (2024), Dynamic FEA Analysis of the Super Lightweight External Cryogenic Fuel Tank (SLWT) Made of Aluminium Alloy 2195–Graphene Nano Composite for Launch Vehicle Aerospace Application, Journal of Composites Science, Vol. 8, 260. https://doi.org/10.3390/jcs8070260.
Bharathiraja P, Anthony Xavior M., (2024), Effect of B 4 C and graphene on the microstructural and mechanical properties of Al6061 matrix composites, Journal of Materials Research and Technology, Vol., 31, pp. 496 – 505.
Madhankumar A., Anthony Xavior M., (2024), Graphene reinforced ceramic matrix composite (GRCMC) – state of the art, Engineering Research Express, IoP Publishing Ltd., DOI 10.1088/2631-8695/ad476a.
Madhankumar A and Anthony Xavior M, (2024), Material characterization of graphene and boron nitride for composites reinforcement, Engineering Research Express, IoP Publishing Ltd. DOI 10.1088/2631-8695/ad443a.
Agbossou, K., Boroze, T.T.E., Napo, K., Xavior, A.M., Batako, A.D.L. (2024). An Investigation into Hohenheim Solar Tunnel for Drying Maize in Sub-Saharan Climate. In: Janmanee, P., et al. Advanced in Creative Technology- added Value Innovations in Engineering, Materials and Manufacturing. ICCT 2023. Lecture Notes in Networks and Systems, vol 979. Springer, Cham. https://doi.org/10.1007/978-3-031-59164-8_12.
Khramenkov, M., Batako, A.D.L., Xavior, A.M. (2024). Vibratory Processing of Hard-to-Cut Aerospace Material. In: Janmanee, P., et al. Advanced in Creative Technology- added Value Innovations in Engineering, Materials and Manufacturing. ICCT 2023. Lecture Notes in Networks and Systems, vol 979. Springer, Cham. https://doi.org/10.1007/978-3-031-59164-8_13.
Jeyapandiarajan, P., Anthony Xavior, M., Butdee, S., Srikhumsuk, P. (2024). A Study on Surface Modification of Lm6Al2O3 Metal Matrix Composites. In: Janmanee, P., et al. Advanced in Creative Technology- added Value Innovations in Engineering, Materials and Manufacturing. ICCT 2023. Lecture Notes in Networks and Systems, vol 979. Springer, Cham. https://doi.org/10.1007/978-3-031-59164-8_9.
Balaji. V and Anthony Xavior. M (2024). Development of high entropy alloys (HEAs): Current trends, Heliyon, https://doi.org/10.1016/j.heliyon.2024.e26464.
A. Baskar, M. Anthony Xavior, P. Jeyapandiarajan, Andre Batako, Anna Burduk (2024). A novel two-phase trigonometric algorithm for solving global optimization problems, Annals of Operations Research, https://doi.org/10.1007/s10479-024-05837-5.
Vinothraj U T and Anthony Xavior. M (2024). Wear And Frictional Behaviour Of Additive Manufactured SS 316L Through Powder Bed Fusion, Journal of Applied Science and Engineering, Vol. 27 (12), pp 3531-3542. https://doi.org/10.6180/jase.202412_27(12).0001.
Balaji. V and Anthony Xavior. M. (2024). Effects Of High Entropy Alloys Coating (HEAC) And Their Property Evaluation, Journal of Applied Science and Engineering, Vol. 27 (11), pp 3485-3498. https://doi.org/10.6180/jase.202411_27(11).0012.
Dworak K., Grabowik C., Pihnastyi O., Anthony Xavior M. (2023). Determination of the Scope and Parameters of Testing the Total Resistance of Military Equipment in Class N.11 to the Impact of Critical Environmental Conditions. In: Burduk, A., Batako, A., Machado, J., Wyczółkowski, R., Antosz, K., Gola, A. (eds) Advances in Production. ISPEM 2023. Lecture Notes in Networks and Systems, vol 790. Springer, Cham. https://doi.org/10.1007/978-3-031-45021-1_42.
W., Galiński M., Gwiazda A., Suthep Butdee, Anthony Xavior M., (2023). Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures. In: Burduk, A., Batako, A.D.L., Machado, J., Wyczółkowski, R., Dostatni, E., Rojek, I. (eds) Intelligent Systems in Production Engineering and Maintenance III. ISPEM 2023. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-44282-7_55.
Arivazhagan Anbalagan, Venugopal A., Anthony Xavior M., Ashwath P., Andre Batako, (2023). Novel Machining Configuration of Carbon Fibre Reinforced Polymer (CFRP) Using Wire Electric Discharge Machining (WEDM). In: Burduk, A., Batako, A.D.L., Machado, J., Wyczółkowski, R., Dostatni, E., Rojek, I. (eds) Intelligent Systems in Production Engineering and Maintenance III. ISPEM 2023. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-44282-7_2.
Ajithkumar, and M. Anthony Xavior (2023), Machinability analysis on Al7075 matrix composites reinforced by nano‑silicon carbide, boron carbide, graphene and MWCNT, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol., 45, 534. https://doi.org/10.1007/s40430-023-04462-w.
Baskar A and M. Anthony Xavior (2023), A Simple Hybrid Local Search Algorithm for Solving Optimization Problems, IFIP Advances in Information and Communication Technology, Vol 670. Springer.com, https://doi.org/10.1007/978-3-031-39811-7_20.
Venkatesan S. and Anthony Xavior M. (2023), Analysis of surface roughness on aluminium alloy – Graphene composites, Materials Today : Proceedings, https://doi.org/10.1016/j.matpr.2023.05.737.
M. Venkatraman, M. Anthony Xavior, P. Ashwath (2023), Property evaluation of AA7075 based metal matrix composites reinforced with titanium carbide processed through microwave sintering, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2023.04.692.
A. Madhankumar, Sreethul Das, P. Jeyapandiarajan, J. Joel, P. Ashwath, M. Venkatraman, VG Partiban, M. Anthony Xavior, (2023), Influence of oxide based reinforcements in oxide -oxide ceramic matrix composites (CMCs), Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2023.05.712.
M. Anthony Xavior, P. Ashwath, Andre Batako, P. Jeyapandiarajan, J. Joel and Arivazhagan Anbalagan (2023), Processing and characterization of aluminium alloy 6061 graphene composite printed by direct metal laser sintering, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2023.03.295.
Arivazhagan Anbalagan, Edward James Launchbury, Marcos Kauffman, Ashwath Pazhani, Michael Anthony Xavior (2023), Investigation on CFRP 3D printing build parameters and their effect on topologically optimised complex models, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2023.04.352.
Amberbir Wondimu, Andre D.L. Batako, Negash Alemu, Hailu Gemechu, M. Anthony Xavior (2023), An investigation into rail joint structural design challenges, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2023.04.354.
P. Jeyapandiarajan, U.T. Vinothraj, Jayaram Dasari, J. Joel, M. Anthony Xavior, Sasidharan Periane Natarajan, A. Duchosal (2023), Investigation on post processing techniques oriented towards strength improvement of 3D printed SS316L, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2023.05.049.
Karthikeyan Ramachandran, Constance L. Gnanasagaran, Ashwath Pazhani, Vishaal Harikrishna Kumar, M. Anthony Xavior, R Ram Subramani, T. Arunkumar (2023), Impact behaviour of MWCNTs reinforced YSZ and Al2O3 ceramic-nanocomposites prepared via vacuum hot-pressing technique, Journal of Materials Research and Technology, Vol., 2 4, pp. 6595 – 6603.
Ashwath Pazhani, M. Venkatraman, M. Anthony Xavior, Arivarasu Moganraj, Andre Batako, Jeyapandiarajan Paulsamy, Joel Jayaseelan, Arivazhagan Anbalagan, Jayesh Shanthi Bavan (2023), Synthesis and characterisation of graphene-reinforced AA 2014 MMC using squeeze casting method for lightweight aerospace structural applications, Materials & Design, Vol., 230, 111990.
Joel J., Ashwath P., Anthony Xavior M., Jeyapandiarajan P., Andre Batako and Prashantha Kumar H. G. (2022), Characterization Studies on Graphene-Aluminium NanoComposites for Aerospace Launch Vehicle External Fuel Tank Structural Application, Materials, Vol. 15, 5907.
Sasidharan Periane Natarajan, S. Vaudreuil, H. Chibane, A. Morandeau, M. Anthony Xavior, J. Cormier, R. Leroy and A. Duchosal (2022), Influence of heat treatment on the tool life while machining SLM Inconel 718 with reference to C & W Inconel 718, Journal of Manufacturing Processes, Vol. 83, pp. 192 – 202.
Joel J, Jeyapandiarajan P, Anthony Xavior M, Harshitha R, Reshma Sreekumar and Prathyaksh Raju (2022), Surface modification of hBN reinforced aluminum alloy Al 2024 through friction stir processing, Journal of Physics: Conference Series, doi:10.1088/1742-6596/2198/1/012047.
Ajithkumar J P, and Anthony Xavior M (2022), Mechanical, microstructural and electrical properties of Al7075/SiC based hybrid composites with nano B4C, Graphene and CNT reinforcements, Journal of Physics: Conference Series, doi:10.1088/1742-6596/2198/1/012049.
Ashwath P, Anthony Xavior M, Jeyapandiarajan P, Joel J and Andre Batako (2022), Surface Finish and Property Evaluation of Direct Metal Laser Sintered (DMLS) Al-Si-10Mg alloy, Journal of Physics: Conference Series, doi:10.1088/1742-6596/2198/1/012055.
Jeyapandiarajan P., Ashwath P., Xavior M.A. (2022). Aircraft Brake Pad Reconstruction and Fabrication. In: Batako, A., Burduk, A., Karyono, K., Chen, X., Wyczółkowski, R. (eds) Advances in Manufacturing Processes, Intelligent Methods and Systems in Production Engineering. GCMM 2021. Lecture Notes in Networks and Systems, Vol 335. Springer, Cham. https://doi.org/10.1007/978-3-030-90532-3_19
Sasidharan Periane Natarajan, Sebastien Vaudreuil, Hicham Chibane, Antoine Morandeau, Michael Anthony Xavior, Jonathan Cormier, Rene Leroy and Arnaud Duchosal (2022), Tool life and surface integrity characteristics in milling of SLM and C&W inconel 718 in dry and MQL condition, The International Journal of Advanced Manufacturing Technology, https://doi.org/10.1007/s00170-022-09327-5.
Ashwath P., Anthony Xavior M., Rajendran R., Andre DL Batako, P. Jeyapandiarajan and J. Joel (2022), Microwave-assisted T6 heat treating of aluminium alloy-Al2O3 nanocomposites, MRS Communications, DOI: 10.1557/s43579-022-00169-6.
Ashwath P., Anthony Xavior M., Andre DL Batako, P. Jeyapandiarajan and J. Joel (2022), Selective laser melting of AleSie10Mg alloy: microstructural studies and mechanical properties assessment, Journal of Materials Research and Technology, Vol. 17, pp. 2249 – 2258.
Jeyapandiarajan P., Anthony Xavior M., Sasidharan P., Duchosal A., (2021), Influence of micro-holes on rake face of the carbide insert on machining performance, MM Science Journal, Pg.No (5228-5233), DOI: 10.17973/MMSJ.2021_11_2021133.
Jeyapandiarajan P., Xavior M.A., Anbalagan A (2021), Performance evaluation of (AlCrn) PVD Coated cBN inserts on machining of Inconel 718, MM Science Journal, Pg.No (5219-5227), DOI: 10.17973/MMSJ.2021_11_2021178.
S. Periane, A. Duchosal, S. Vaudreuilb, H. Chibanec, A. Morandeau, M. Anthony Xavior, R. Leroy (2021), Influence of heat treatment on the fatigue resistance of Inconel 718 fabricated by selective laser melting (SLM), Materials Today: Proceedings, Vol. 46, pp.7860 – 7865.
Baskar A and M. Anthony Xavior (2021), A facility location model for marine applications, Materials Today: Proceedings, Vol. 46, pp.8143 – 8147.
P. Ashwath and M. Anthony Xavior (2021), Surface modification on aluminum metal matrix composite for high strength application -Current state of art, Materials Today: Proceedings, Vol. 46, pp.7130 – 7134.
Arivazhagan Anbalagan, Eakambaram Arumugam and Anthony Xavior Michael (2021), A FEA simulation study of ball end mill for fixed 3+1 / 3+2 axis machining of Ti-6Al-4V, Materials Today: Proceedings, Vol. 46, pp. 7803 – 7814.
A. Baskar, M. Anthony Xavior (2021), New idle time-based tie-breaking rules in heuristics for the permutation flowshop scheduling problems, Computers and Operations Research, Vol. 133, 105348.
J. P. Ajith Kumar and M. Anthony Xavior (2021), Machinability Studies on Al 7075 - based hybrid composites reinforced with SiC, Graphene and CNT, International Journal of Machining and Machinability of Materials, Vol. 23 (1), pp 64 – 87.
H.G. Prashantha Kumar, M. Anthony Xavior and Laurel Simon Lobo (2021), Property evaluation of hot extruded aluminum alloy – Graphene Nanocomposites, Materials Letters, Vol. 282, 128688.
S. Periane, A. Duchosal, S. Vaudreuil, H. Chibane, A. Morandeau, M. Anthony Xavior, R. Leroy (2020), Selection of machining condition on surface integrity of additive and conventional Inconel 718, 5th CIRP CSI 2020, Procedia CIRP, Vol. 87, pp 333-338.
Venkatesan S. and Anthony Xavior M. (2020), Wear Property Evaluation of Aluminum Alloy (AA7050) Metal Matrix Composite Reinforced with Graphene Fabricated by Stir and Squeeze Cast Processes, Materials Today: Proceedings, Vol. 22 (4), pp. 3330 - 3339.
A. Baskar, M. Anthony Xavior (2020), Heuristics based on Slope Indices for Simple Type I Assembly Line Balancing Problems and Analyzing for a Few Performance Measures, Materials Today: Proceedings, Vol. 22 (4), pp. 3171 - 3180.
M. Anthony Xavior, D. Nishanth, N. Navin Kumar, P. Jeyapandiarajan (2020), Synthesis and Testing of FGM made of ABS Plastic Material, Materials Today: Proceedings, Vol. 22 (4), pp. 1838 - 1844.
Joel J. and Anthony Xavior M (2020), Enhancing the Frictional Behaviour of H-BN Reinforced Nanocomposites Through Laser Shock Peening, https://doi.org/10.1115/IMECE2019-10162.
Ashwath P, Joel J, Jeyapandiarajan P, Anthony Xavior M and Rajendran R (2020), Frictional property evaluation of aluminium alloy based metal matrix composites under dry braking condition in pin—on—disc system, Materials Research Express, Vol. 7, https://doi.org/10.1088/2053-1591/ab5c5d.
A. Baskar , M. Anthony Xavior , N. Nithyanandan and B. Dhanasakkaravarthi (2020), Analysis of a Few Heuristics Proposed Based on Slope Indices to Solve Simple Type—I Assembly-Line Balancing Problems, Lecture Notes on Multidisciplinary Industrial Engineering, Springer Nature, https://doi.org/10.1007/978-981-32-9487-5_41, pp 499 - 506.
A. Eakambaram and M. Anthony Xavior (2019), Influence of recast layer on the fatigue life of Ti6Al4V processed by electric discharge machining, Archives of Metallurgy and Materials, Vol. 64 (4), pp. 1541 - 1548.
Joel J. and Anthony Xavior M. (2019), Optimization on machining parameters of aluminum alloy hybrid composite using carbide insert, Materials Research Express, Vol. 6. https://doi.org/10.1088/2053-1591/ab46c7
Jeyapandiarajan P., Anthony Xavior M., Sasidharan N. C., and Duchosal A. (2019), Surface hardening and wear correlations studies when turning inconel 718, MM Science Journal, Special Issue on HSM2019, pp. 3041 - 3047
Jeyapandiarajan P. and Anthony Xavior M. (2019), Influence of cutting condition on machinability aspects of Inconel 718: A review paper, Journal of Engineering Research, Vol. 8 No. (2) pp. 315 - 332.
Venkatesan S. and Anthony Xavior M. (2019), Characterization on aluminium alloy 7050 metal matrix composite reinforced with Graphene nanoparticles, Procedia Manufacturing, Vol. 30, pp. 120 - 127.
Prashantha Kumar H. G., Joel J. and Anthony Xavior M. (2019), Effect of reinforcement surface area on tribological behavior of aluminium alloy nanocomposites, Procedia Manufacturing, Vol. 30, pp. 224 - 230.
Jeyapandiarajan P. and Anthony Xavior M. (2019), Evaluating the machinability of Inconel 718 under different machining conditions, Procedia Manufacturing, Vol. 30, pp. 253 - 260.
Joel J. and Anthony Xavior M. (2019), Effect of alloying elements on the mechanical behavior of microwave synthesised composites, Procedia Manufacturing, Vol. 30, pp. 208 - 215.
Anthony Xavior M. and Ashwath P. (2019), Fatigue life and fracture morphology of Inconel 718 machined by spark EDM process, Procedia Manufacturing, Vol. 30, pp. 292 - 299.
Ajith Kumar J. P. and Anthony Xavior M. (2019), Cutting force and surface roughness analysis during turning of AI 7075 based hybrid composites, Procedia Manufacturing, Vol. 30, pp. 180 - 187.
Ajith Kumar J. P. and Anthony Xavior M. (2019), Flank and crater wear analysis during turning of Al 7075 based hybrid composites, Materials Research Express, Vol. 6. pp. https://doi.org/10.1088/2053-1591/ab196e.
Venkatesan S. and Anthony Xavior M. (2019), Wear Characteristics studies on graphene reinforced AA7050 based composite, Materials Research Express, Vol. 6. pp. https://doi.org/10.1088/2053-1591/ab0125.
Jeyapandiarajan P., Joel J., Parth Pramesh, Nithish Dugar, Sarthak Chandok and Anthony Xavior M. (2019), Evaluating the mechanical characteristics of aluminium alloy 2285 processed by friction stir processing, Materials Research Express, Vol. 6. pp. https://doi.org/10.1088/2053-1591/aae5e5.
Venkatesan S. and Anthony Xavior M. (2018), Tensile behavior of aluminium alloy (AA 7050) metal matrix composite reinforced with graphene fabricated by stir and squeeze cast processes, Science and Technology of Materials, Vol. 30, pp. 74 - 85.
Venkatesan S. and Anthony Xavior M. (2018), Analysis of mechanical properties of aluminium alloy metal matrix composites by squeeze casting - A Review, Materials Today: Proceedings, Vol. 5, pp. 11175 - 11184.
Anthony Xavior M., Ranganathan N., Prashantha Kumar H G., Joel J. and Ashwath P., (2018), Mechanical properties evaluation of hot extruded AA 2024 - Graphene nano composites, Materials Today: Proceedings, Vol. 5, pp. 12519 - 12524.
Ashwath P., Joel J., Prashantha Kumar H G., Anthony Xavior M., Anubhav Goel, Tushar Nigam and Mohit Rathi (2018), Processing and Characterization of extruded 2024 aluminium alloy, Materials Today: Proceedings, Vol. 5, pp. 12479 - 12483
Prashantha Kumar H. G., Anthony Xavior M., Ashwath P., Joel J. Shivprasad Hosmani, Prateek M Shivalli, Hrishikesh Singh and Kaustav Chakraborty (2018), Synthesis and property evaluation of hot extruded AA2024 - MWCNT Nano Composites, Materials Today: Proceedings, Vol. 5, pp. 12545 - 12550.
Anthony Xavior M., Ranganathan N., and Ashwath P., (2018), Effect of recast layer on the low cycle fatigue life of electric discharge machined Inconel 718, Materials Today: Proceedings, Vol. 5, pp. 12666 - 12672.
Anthony Xavior M., Arnaud Duchosal and Jeyapandiarajan P., (2018), Experimental investigation on work hardening and residual stress dueing machining of Inconel 718, Materials Today: Proceedings, Vol. 5, pp. 13301 - 13308.
Joel J. and Anthony Xavior M. (2018), Aluminium alloy composites and its machinability studies; A Review, Materials Today: Proceedings, Vol. 5, pp. 13556 - 13562.
Anthony Xavior M. and Jeyapandiarajan P., (2018), Multi-Objective optimization during hard turning of AISI D2 steel using Grey relational Analysis, Materials Today: Proceedings, Vol. 5, pp. 13620 - 13627.
Baskar A, Anthony Xavior M. and Nithyanandan N., (2018), Analysis of a few simple heuristics for the permutation flow shop scheduling problems for any batch processing industry, Materials Today: Proceedings, Vol. 5, pp. 11762 - 11770.
Ashwath P., Jeyapandiarajan P., Anthony Xavior M., Shah Chintankumar, Shethneel and Mukul Kumar (2018), Analysis of strength and microstructural characteristics of heat treated Al alloy composites, Materials Today: Proceedings, Vol. 5, pp. 11802 - 11807.
Ashwath P., Jeyapandiarajan P., Joel J., Prashantha Kumar H G., Anthony Xavior M., Sumanth N., Chillakuru Saketh Reddy and Deepa (2018), Flexural studies of Graphene reinforced aluminium metal matrix composite, Materials Today: Proceedings, Vol. 5, pp. 13459 - 13463.
Ashwath P., Jeyapandiarajan P., Anthony Xavior M., Rahul Verma, Neeraj Kumar Singh and Varalaxshmi (2018), Heat treating studies of Graphene reinforced aluminium metal matrix composite, Materials Today: Proceedings, Vol. 5, pp. 11859 - 11863.
Ashwath P., Jeyapandiarajan P., Anthony Xavior M., Mayank Somani, Utkarsh Dharnia and Himanshu Grover (2018), Effect of copper alloying and reinforcement percentage on the microstructure - tribological aspects of the aluminium alloy composites, Materials Today: Proceedings, Vol. 5, pp. 11853 - 11858.
Ajithkumar J P and Anthony Xavior M (2018), Influence of Nano-Lubrication in machining operations - A review, Materials Today: Proceedings, Vol. 5, pp. 11185 - 11192.
Prashantha Kumar H. G., Anthony Xavior M., Ashwath P., Joel J. and Kaustav Chakraborty (2018), Effect of flake reinforcement on mechanical properties of AA 6061 nano composite with secondary nanoplatelet-Graphene processed through powder metallurgy, Materials Today: Proceedings, Vol. 5, pp. 6626 - 6634.
Prashantha Kumar H. G., and Anthony Xavior M., (2018), Encapsulation and microwave hybrid processing of Al 6061–Graphene–SiC composites, Materials and Manufacturing Processes, Vol. 33(1), pp., 19 - 25.
Prashantha Kumar H. G., Anthony Xavior M., and Ashwath P., (2018), Ultrasonication and microwave processing of aluminum alloy- Graphene - Al2O3 nanocomposite, Materials and Manufacturing Processes, Vol. 33(1), pp., 13 - 18.
Ashwath P., and Anthony Xavior M., (2018), Effect of ceramic reinforcements on microwave sintered metal matrix composites, Materials and Manufacturing Processes, Vol. 33(1), pp., 7 - 12.
Prashantha Kumar H G., Prabhakaran S., Anthony Xavior M., Kalainathan S., Dong Lin, Pratik Shukla and Vijay K Vasudevan (2018), Enhanced surface and mechanical properties of bioinspired nanolaminate graphene-aluminum alloy nanocomposites through laser shock processing for engineering applications, Materials Today Communications, Vol. 16, pp., 81 - 89.
Anthony Xavior M., Ashwath P., Harun Ali, Atef Moideen, Pansura Banu, Illanthendral, Muhammad Raneez and Saneesh Sancylal (2018), Effect of recast layer thickness on the mechanical characteristics of INCONEL 718 machined by spark EDM process, Materials Today: Proceedings, Vol. 5, pp. 8249 - 8255.
Ashwath P., Joel J., Anthony Xavior M. and Prashantha Kumar H. G. (2018), Effect of SiC and Al2O3 particles addition to AA 2900 and AA 2024 MMC's synthesized through microwave sintering, Materials Today: Proceedings, Vol. 5, pp. 7329 - 7336.
Anthony Xavior M., Prashantha Kumar H. G. and Ajith Kumar K (2018), Tribological studies on AA2024 - Graphene/CNT Nanocomposites processed through powder Metallurgy, Materials Today: Proceedings, Vol. 5, pp. 6588 - 6596.
P. Ashwath and M. Anthony Xavior (2018), Effect of microwave heat treating processing on frictional behaviour of aluminium alloy 2900 composites, Tribology - Materials, Surfaces and Interfaces. Vol. 12 (2), pp. 85 - 96.
M. Anthony Xavior, P. Ashwath, Harun Ali, Atef Moideen, Pansura Banu, Illanthendral, Muhammad Raneez, Saneesh Sancylal (2018), Effect of recast layer thickness on the mechanical characteristics of INCONEL 718 machined by spark EDM process, Materials Today: Proceedings, Vol. 5, pp. 8249 - 8255.
M. Anthony Xavior, Prashantha Kumar Hosamane and Jeyapandiarajan Paulchamy (2017), Anisotropic Behavior of Aluminum Alloy 2024-Graphene Composites at Varying Strain Rates, ASME, International Mechanical Engineering Conference and Exposition (IMECE - 2017), Tampa, Florida, USA. doi:10.1115/IMECE2017-70087.
J. Joel and M. Anthony Xavior, (2017), Machinability Analysis of Aluminum Alloy-Graphene Metal Matrix Composites Using Uncoated and DLC-Coated Carbide Insert, ASME, International Mechanical Engineering Conference and Exposition (IMECE - 2017), Tampa, Florida, USA. doi:10.1115/IMECE2017-70098.
Pazhani Ashwath, M. Anthony Xavior, Tushar Nigam, Anubhav Goel and Mohit Rathi, (2017), Effect of Recast Layer on the Strength Properties of the Spark Electric Discharge Machined Aluminium Alloy Composites, ASME, International Mechanical Engineering Conference and Exposition (IMECE - 2017), Tampa, Florida, USA. doi:10.1115/IMECE2017-70104.
Anthony Xavior M., Manohar M., Patil Mahesh Madhukar and Jeyapandiarajan P., (2017), Investigation of Surface Integrity during turning Inconel 718, Transactions of the Canadian Society for Mechanical Engineering, Vol. 41 (3), pp. 387 - 394.
Prashantha Kumar H G. and Anthony Xavior M., (2017), Effect of Graphene addition on flexural properties of Al 6061 Nano-composites, Materials Today: Proceedings, Vol. 4 (8), pp. 8127 - 8133.
Anthony Xavior M., Manohar M., Patil Mahesh Madhukar and Jeyapandiarajan P., (2017), Experimental investigation of work hardening, residual stress and microstructure during machining Inconel 718, Journal of Mechanical Science and Technology, Vol. 31 (10), pp. 4789~4794.
Jeyapandiarajan P. and Anthony Xavior M., (2017), Experimental Investigations on the Machinability of Inconel 718 Under Different Cutting Conditions, Journal of Chinese Society of Mechanical Engineers, Vol. 38 (3), pp. 295 - 304.
Prashantha Kumar H G. and Anthony Xavior M., (2017), Effect of Graphene addition and tribological performance of Al 6061 / graphene flake composite, Tribology - Materials, Surfaces & Interfaces, Vol. 11(2), pp., 88 - 97.
Anthony Xavior M. and Prashantha Kumar H G., (2017), Processing and Characterization Techniques of Graphene Reinforced Metal Matrix Composites (GRMMC); A Review, Materials Today: Proceedings, Vol. 4, pp 3334–3341.
Prashantha Kumar H G. and Anthony Xavior M., (2017), Processing and Characterization of Al 6061 – Graphene Nanocomposites, Materials Today: Proceedings, Vol. 4, pp 3308–3314.
Prashantha Kumar H G. and Anthony Xavior M., (2017), Assessment of mechanical and tribological properties of Al 2024 - SiC - Graphene hybrid composites, Procedia Engineering, Vol. 174, pp 992 - 999.
Anthony Xavior M., Manohar M., Jeyapandiarajan P. and Patil Mahesh Madhukar, (2017), Tool wear assessment during machining of Inconel 718, Procedia Engineering, Vol. 174, pp 1000 - 1008.
Anthony Xavior M. and Ajith Kumar J P., (2017), Machinability of Hybrid Metal Matrix Composite - A review, Procedia Engineering, Vol. 174, pp 1110 - 1118.
Prashantha Kumar H G. and Anthony Xavior M., (2017), Encapsulation and microwave hybrid processing of Al 6061- Graphene - SiC Composites, Materials and Manufacturing Processes, DOI: 10.1080/10426914.2017.1279320.
Baskar A., Anthony Xavior M., Dhanasakkaravarthi B., (2016), Impact of initial partial sequence in the make-span, in permutation flow shop scheduling heuristic algorithms - An analysis, Indian Journal of Science and Technology, Vol. 9 (42), DOI: 10.17485/ijst/2016/v9/42/103302.
Prashantha Kumar H G., Anthony Xavior M., Ashwath P., (2016), Ultrasonification and microwave processing of aluminium alloy - Graphene - Al2O3 nanocomposite. Materials and Manufacturing Processes, DOI: 10.1080/10426914.2016.1244852.
Ashwath P., Anthony Xavior M., (2016), Effect of ceramic reinforcements on microwave sintered metal matrix composites, Materials and Manufacturing Processes, DOI: 10.1080/10426914.2016.1244851.
Anthony Xavior M., Mahesh Patil, Abheek Maiti, Mrinal Raj, Nitesh Lohia, (2016), Machinability studies on Inconel 718, IOP Conference Series: Materials Science and Engineering, Vol. 149, doi: 10.1088/1757-899X/149/1/012019.
Siddhartha Jauhari, Prashantha Kumar H G., Anthony Xavior M., (2016), Synthesis and characterization of AA 6061 - Graphene - SiC hybrid nanocomposites processed through microwave sintering, IOP Conference Series: Materials Science and Engineering, Vol. 149, doi: 10.1088/1757-899X/149/1/012086.
Vamsi Krishna M. and Anthony Xavior M., (2016), A New Hybrid Approach to Optimize the End Milling Process for Al/SiC Composites using RSM and GA, Indian Journal of Science and Technology, Vol. 9(30), DOI: 10.17485 / ijst / 2016 / v9i30 / 78532.
R. Vinayagamoorthy and M. Anthony Xavior, (2016), Taguchi-fuzzy inference system and grey relational analysis to optimise process with multiple performance characteristics in precision turning of Ti-6Al-4V, Journal of Computer Aided Engineering and Technology, Vol. 8(3), pp. 295 – 323.
R. Pugazhenthi and M. Anthony Xavior (2016), Optimization of idle time of a critical machine and material processing time of a flow shop, International Journal of Enterprise Network Management, Vol. 7(2), pp. 98 - 112.
M. Anthony Xavior and S. Margret Anouncia (2016), Artificial Neural Networks and Case-Based Reasoning models for predicting tool life and tool - shim interface temperature, International Journal of Services Operations and Management, Vol. 24 (3), pp. 379 - 396.
P. Ashwath and M. Anthony Xavior, (2016), Processing Methods and Property Evaluation of Al2O3 and SiC Reinforced Metal Matrix Composites based on Aluminium 2xxx Alloys, Journal of Materials Research, Vol. 31(9) pp. 1201 - 1219.
R. Pugazhenthi, M. Anthony Xavior and R. Saravanan (2016), A case study on effect of grouping techniques in a multi-stage hybrid flow shop, International Journal of Computing Science and Mathematics, Vol. 7 (1), pp. 42 - 53.
R. Vinayagamoorthy and M. Anthony Xavior, (2016), Evaluating the Machinability of Ti-6Al-4V using coated carbide inserts, International Journal of Services Operations and Management, Vol. 23 (2), pp. 187 - 200.
Prashantha Kumar H G and M. Anthony Xavior (2016), Fatigue and Wear Behavior of Al6061–Graphene Composites Synthesized by Powder Metallurgy, Transactions of Indian Institute of Metals, Vol. 69(2), pp. 415 - 419.
P. Ashwath and M. Anthony Xavior (2015), ASME, International Mechanical Engineering Conference and Exposition (IMECE - 2015), Houston, Texas, USA, doi: 10.1115/IMECE2015-50103, pp. V02AT02A046; 7 pages.
Vamsi Krishna M. and Anthony Xavior M., (2015), Optimization of end milling parameters for Al/SiC by Response Surface Methodology, Journal of Advanced Microscopy Research, Vol. 10, pp. 208 - 218.
Vamsi Krishna M. and Anthony Xavior M., (2015), Experiment and statistical analysis of end milling parameters for Al/SiC using Response Surface Methodology, International Journal of Engineering and Technology, Vol. 7(6), pp. 2274 - 2285.
R. Pugazhenthi and M. Anthony Xavior (2015), A heuristic to minimize the idle time of the rental / critical machine in a flow shop, International Journal of Services Operations and Management, Vol. 22 (4), pp. 395 - 412.
Vamsi Krishna M., Bala Narasimha G., Rajesh N. and Anthony Xavior M., (2015), Optimization of influential parameters on mechanical behavior of AlMg SiCu hybrid metal matrix composites using Taguchi integrated Fuzzy approach, Materials Today: Proceedings, Vol. 2, pp. 1464 - 1468.
S. Venkatesan and M. Anthony Xavior (2015), Investigation of Aluminum (Al7050) Metal Matrix composites reinforced with Graphene nanoparticles using Stir casting process, International Journal of Applied Engineering Research, Vol. 10 (15), pp. 35778 – 35783.
S. Karthikeyan, M. Anthony Xavior, P. A. Jeeva, K. Raja (2015), A green approach on the corrosion studiesof Al-SiCcomposites in Sea water, International Journal of ChemTech Research, Vol.8 (3), pp 1109 - 1113.
Baskar Aand M. Anthony Xavior (2015), Analysis of job insertion technique for different initial sequences in permutation flow shop scheduling problems, International journal of Enterprise Network Management, Vol. 6 (3), pp.153–174.
Monimoy Saha, Pankaj Tambe, Soumen Pal, Pravin Kubade, Geetha Manivasagam, M. Anthony Xavior & V. Umashankar, (2015), Effect of non-ionic surfactant assisted modification of hexagonal boron nitride nanoplatelets on the mechanical and thermal properties of epoxy Nanocomposites, Composite Interfaces, DOI: 10.1080/09276440.2015.1056688, Published online: 22 Jun 2015.
Mythili T, Margret Anouncia S, Anthony Xavior M, Adalarasu S and Vasumathy M, (2015), Performance Evaluation of Artificial Intelligence Based Methods for Defect Classification – A Case Study on Weld Radiographic Images, International Journal of Applied Engineering Research, Vol. 10 (55), pp. 3751 – 3756.
Saravanan L and M. Anthony Xavior (2015), Comparative Performance of Coated and Uncoated inserts during intermittent cut milling of AISI 4340 Steel, Journal of Engineering Science and Technology, Vol. 10 (5), pp. 606 – 616.
Praveen Gowtham S and M. Anthony Xavior (2015), Investigation on the Influence of Tool Geometry on Surface Roughness during Hard Turning Process, International Journal of Applied Engineering Research, Vol. 10 (8), pp. 5928 – 5932.
M. Anthony Xavior, (2015), Analysis of cutting force and chip morphology during hard turning of AISI D2 Steel, Journal of Engineering Science and Technology, Vol. 10 (4), pp. 26 – 34.
Umasankar V and M. Anthony Xavior, (2015), Fracture toughness evaluation technique for metal matrix composites using ball indentation method, International Journal of Computer Aided Engineering and Technology, Vol. 7 (1), pp. 132 – 141.
R. Vinayagamoorthy and M. Anthony Xavior, (2014), Fuzzy inference System for Prediction During Precision Turning of Ti-6Al-4V, Procedia Engineering, Vol. 97, pp 308 – 319.
R. Vinayagamoorthy and M. Anthony Xavior, (2014), Parametric Optimization on Multi-Objective Precision Turning Using Grey Relational Analysis, Procedia Engineering, Vol. 97, pp 299 – 307.
Vamsi Krishna and M. Anthony Xavior, (2014), An Investigation on the Mechanical Properties of Hybrid Metal Matrix Composites, Procedia Engineering, Vol. 97, pp 918 – 924.
Rathod Abhik, Umasankar V and M. Anthony Xavior, (2014), Evaluation of Properties for A1-SiC Reinforced Metal Matrix Composite for Brake Pads, Procedia Engineering, Vol. 97, pp 941 – 950.
A. Srivani and M. Anthony Xavior, (2014), Investigation of Surface Texture Using Image Processing Techniques, Procedia Engineering, Vol. 97, pp 1943 – 1947.
Saravanan Lakshmanan and M. Anthony Xavior, (2014), Performance of Coated and Uncoated Inserts during Intermittent Cut Milling of AISI 1030 Steel, Procedia Engineering, Vol. 97, pp 372 – 380.
R. Pugazhenthi and M. Anthony Xavior, (2014), A Genetic Algorithm Applied Heuristic to Minimize the Makespan in a Flow Shop, Procedia Engineering, Vol. 97, pp 1735 – 1744.
R. Pugazhenthi and M. Anthony Xavior, (2014), A Survey on Occurrence of Critical Machines in a Manufacturing Environment, Procedia Engineering, Vol. 97, pp 105 – 114.
Prashantha Kumar H G and M. Anthony Xavior (2014), Graphene Reinforced Metal Matrix Composite (GRMMC): A Review, Procedia Engineering, Vol. 97, pp 1033 – 1040.
A. Baskar and M. Anthony Xavior (2014), Optimization of Makespan in Job and Machine Priority Environment, Procedia Engineering, Vol. 97, pp 22 – 28.
P. Ashwath and M. Anthony Xavior (2014), The Effect of Ball Milling & Reinforcement Percentage on Sintered Samples of Aluminium Alloy Metal Matrix Composites, Procedia Engineering, Vol. 97, pp 1027 – 1032.
R. Pugazhenthi and M. Anthony Xavior, (2014), Computation of Makespan Using Genetic Algorithm in a Flowshop, American-Eurasian Journal of Scientific Research, Vol. 9, No. 4, pp 105-113 (NS)
M. Anthony Xavior (2014), Experimental Investigations on the Machinability of AISI 304, AISI 52100 and AISI D2 Steel Materials, Middle-East Journal of Scientific Research, Vol. 21, No. 9, pp 1550-1560.
R. Pugazhenthi and M. Anthony Xavior, (2014), A Characteristic Study of Exponential Distribution Technique in a Flowshop Using Taillard Benchmark Problems, Proceedings of the Pakistan Academy of Sciences, Vol. 51, No. 3, pp 187–192.
V. Umasankar and M. Anthony Xavior (2014), Influence of nano particles reinforcement on the thermal and electrical properties of aluminium alloy matrix composites, International Journal of ChemTech Research, Vol.6, No.6, pp 3409 - 3411, Aug - Sept 2014.
V. Umasankar and M. Anthony Xavior (2014), Investigations on the Development of Particle Reinforced Aluminum SiC Composite by Powder Metallurgy Process, Journal of The Association of Engineers, India, Vol. 84, No. 1 & 2, pp 37 – 47, 2014. (NS)
R. Pugazhenthi and M. Anthony Xavior (2014), Minimizing material processing time and idle time of a critical machine in a flow shop, Advanced Material Research, Vol. 984 – 985, pp106 – 110.
A. Baskar and M. Anthony Xavior (2014), Optimizing the total completion time in process planning using the random simulation algorithm, ARPN Journal of Engineering and Applied Sciences, Vol. 9, No. 4, pp. 479 – 486.
G. Bala Narasimha, Vamsi Krishna and M. Anthony Xavior (2014), A comparative study on analytical and experimental buckling stability of metal matrix composite columns with fixed and hinged ends, International Journal of Applied Engineering Research, Vol. 9, No. 2, pp. 191 – 196.
V. Umasankar, S. Karthikeyan and M. Anthony Xavior (2014), The influence of electroless nickel coated SiC on the interface strength and microhardness of Aluminium Composites, Journal of Materials and Environmental Sciences, Vol. 5 (1), pp. 153 – 158.
R. Pugazhenthi, M. Anthony Xavior and Mohamed Shajahan (2014), Application of Genetic Algorithm in permutation flow shop to optimize the makespan, IEEE International Conference on Computer Communication and Systems, pp 160 – 163.
V. Umasankar, M. Anthony Xavior and S. Karthikeyan (2014), Experimental evaluation of the influence of processing parameters on the mechanical properties of SiC particle reinforced AA6061 aluminium alloy matrix composite by powder processing, Journal of Alloys and Compounds, Vol. 582, pp. 380–386.
R. Vinayagamoorthy and M. Anthony Xavior (2013), Significant the Effect of Cutting Parameters on Surface Roughness in Precision Turning in TI-6AL-4V, Middle-East Journal of Scientific Research, Vol. 17, No. 11, pp. 1586-1590.
R. Vinayagamoorthy and M. Anthony Xavior (2013), Taguchi-Fuzzy Inference System for Prediction in Precision Turning of Ti-6al-4v, International Review of Mechanical Engineering, Vol. 7, No. 7 pp. 1515 - 1522.
R. Pugazhenthi and M. Anthony Xavior (2013), Optimization of permutation flow shop with multi-objective criteria, International Journal of Applied Engineering Research, Vol. 8, No. 15, pp. 1807 – 1813.
R. Vinayagamoorthy and M. Anthony Xavior (2013), Appraisal of the performance of PVD Coated Carbide Tools during Precision Turning of Ti-6Al-4V, International Journal of Applied Engineering Research, Vol. 8, No. 12, pp. 1383 – 1394.
R. Vinayagamoorthy and M. Anthony Xavior (2013), Dry Machining of Ti-6Al-4V using PVD Coated Tools, International Journal of Applied Engineering Research, Vol. 8, No. 12, pp. 1373 – 1381.
R. Vinayagamoorthy and M. Anthony Xavior (2013), Assessment of Chip Morphology, Cutting Forces and Tool Wear in Precision Turning Process of Ti-6Al-4V Alloy, International Journal of Applied Engineering Research, Vol. 8, No. 12, pp. 1363 – 1371.
A. Baskar and M. Anthony Xavior (2013), Optimization of Makespan in Flow Shop Scheduling problems using Combinational NEH Family of Heuristics – An Analysis, International Journal of Applied Engineering Research, Vol. 8, No. 10, pp. 1205 – 1216.
A. Baskar and M. Anthony Xavior (2013), Analyzing a few Heuristic Algorithms Considering Machine Idle Time and Processing Time in Permutation Flow Shop Scheduling Problems, International Journal of Applied Information Systems, Vol.6, No.4, pp 07-15.
V. Umasankar, M. Anthony Xavior and S. Karthikeyan (2013), Enhancing the interphase strength of aluminium composite by autocatalytic process, International Journal of ChemTech Research, Vol.5, No.5, pp 2165-2172.
G. Bala Narasimha, M. Vamsi Krishna and M. Anthony Xavior (2013), A review on processing of particulate metal matrix composites and its properties, International Journal of Applied Engineering Research, Vol. 8, No. 6, pp. 647 – 666.
V. Uma Sankar, S. Karthikeyan and M. Anthony Xavior (2013), The retardation of dissolution of Al-SiC composites in acidic medium-A green approach, Journal of Corrosion Science and Engineering, Vol. 16.
V. Uma Sankar, R. Ramanujam, S. Karthikeyan and M. Anthony Xavior (2013), A precursor experimental study on corrosion resistant AA6061-SiCp MMC prepared through PM process using ANOVA and Grey relational analysis - A novel approach, Journal of Corrosion Science and Engineering, Vol. 16.
V. Uma Sankar, S. Karthikeyan and M. Anthony Xavior (2013), A novel inhibition of corrosion of Al-SiC composites in acidic medium, Journal of Corrosion Science and Engineering, Vol. 16.
A. Baskar and M. Anthony Xavior (2013), A simple Model to obtain more than one sequence having Optimal/ near Optimal Make Span using Dummy Machines, Advanced Science Letters, Vol. 19, No. 8, pp. 2419-2423.
M. Anthony Xavior (2013), Parametric modelling on prediction of surface finish in turning of difficult-to-machine steels, International Journal of Service and Computing Oriented Manufacturing, Vol. 1, No. 1, pp 61 – 80.
Tarun Thomas George, J.Venugopal, M. Anthony Xavior and R. Vinayagamoorthy (2013), Investigation on Precision Turning of Titanium Alloys, Advanced Materials Research Vols. 622-623, pp 399-403.
R. Vinayagamoorthy and M. Anthony Xavior (2013), Evaluation of Surface Roughness and Cutting Forces During Precision Turning, Advanced Materials Research Vols. 622-623, pp 390-393.
A. Baskar and M. Anthony Xavior (2013), Solving Permutation Flow Shop Scheduling Problems with Job Idle Time in between Two Machines, Key Engineering Materials Vols. 531-532, pp 699-702.
A. Baskar and M. Anthony Xavior (2013), Optimization of Total Material Processing Time in a Manufacturing Flow Shop Environment, Advanced Materials Research Vols. 622-623, pp 136-141.
M. Anthony Xavior (2012), Evaluating the Machinability of AISI 304 stainless steel using alumina inserts, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 55 (2), pp 841 - 847.
A. Baskar and M. Anthony Xavior (2012), Effects of Dummy Machines on make span in a few classical heuristics using Taillard bench mark problems, International Journal of Materials and Product Technology, Vol. 45, Nos. 1/2/3/4, pp 145 – 162.
A. Baskar and M. Anthony Xavior (2012), Effect of Dummy Machines in the Gupta’s Heuristics for Permutation Flow Shop Problems, Lecture notes in Mechanical Engineering, DOI: 10.1007/978-81-322-1007-8_36, Springer India, pp. 391 – 398.
R. Pugazhenthi and M. Anthony Xavior (2012), A Heuristic toward Minimizing Waiting Time of Critical Jobs in a Flow Shop, Lecture notes in Mechanical Engineering, DOI: 10.1007/978-81-322-1007-8_31, Springer India, pp. 343 – 350.
R. Vinayagamoorthy and M. Anthony Xavior (2012), Surface Integrity of Ti-6Al-4V Precision Machining Using Coated Carbide Tools Under Dry Cutting Condition, Lecture notes in Mechanical Engineering, DOI: 10.1007/978-81-322-1007-8_28, Springer India, pp. 317 – 324.
R. Vinayagamoorthy and M. Anthony Xavior (2012), Investigation of Chip Morphology and Tool Wear in Precision Turning Process, Lecture notes in Mechanical Engineering, DOI: 10.1007/978-81-322-1007-8_21, Springer India, pp. 241 – 250.
A. Baskar and M. Anthony Xavior (2012), Improving the Solution using the concept of Dummy Machines in Palmer Slope Index Method for Flow Shop Scheduling Problems, European Journal of Scientific Research, Vol. 86, No. 1, pp. 25 – 33.
A. Baskar and M. Anthony Xavior (2012), A Simple Model to Optimise General Flow – Shop Scheduling Problems with known Break – Down Time and Weights of Jobs, Procedia Engineering, Vol. 38, pp. 191 – 196.
M. Anthony Xavior and M. Adithan (2012), Investigation on the influence of cutting parameters on machining performance during turning of difficult-to-machine steels, Asian International Journal of Science and Technology in Production and Manufacturing Engineering, Vol. 5, No. 1, pp. 41 – 53.
M. Anthony Xavior and S. Margret Anouncia (2012), Case-based reasoning (CBR) model for hard machining process, International Journal of Advanced Manufacturing Technology, Vol. 61, No. 9 - 12, pp. 1269 – 1275.
A. Baskar and M. Anthony Xavior (2012), A new Heuristic Algorithm using Pascal’s Triangle to determine more than one sequence having Optimal / near Optimal Make Span in Flow Shop Scheduling Problems, International Journal of Computer Applications, Vol. 39, No. 5, pp. 9 – 15.
M. Anthony Xavior and M. Adithan (2012), Evaluation of parametric models in predicting the machining performance, International Journal of Industrial and Systems Engineering, Vol. 11, No. 4, pp 406 – 427.
M. Anthony Xavior and M. Adithan (2012), Tool life evaluation of multi-coated carbide, cermet and alumina inserts on turning of difficult-to-machine alloy steels, Journal of Machining and Forming Technologies, Vol. 4, Nos. 1/2, pp 107 – 122.
M. Anthony Xavior and M. Adithan (2010), Evaluating the performance of cutting fluids in machining of AISI 304 austenitic stainless steel, International Journal of Machining and Machinability of Metals, Vol. 7, Nos. 3 / 4, pp. 244 – 259.
M. Anthony Xavior and M. Adithan (2009), Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic steel, Journal of Materials Processing Technology, Vol. 209, pp. 900 – 909.
Diversification options for a sugar company – A case study, Journal of the Indian Institution of Industrial Engineering, Vol. XXXII No.8. August 2003.
Front End Activities of New product Management Process – A Case Study, Journal of the Indian Institution of Industrial Engineering, Vol. XXXII No.5. May 2003.
M. Anthony Xavior (2002), Economic Analysis of a Product Development Process, “ABHIGYAN” – Journal of Foundation for Organisational Research and Education”, Vol.XX No.2.
M. Anthony Xavior (2002), Activity based decision making on DFM technique, Journal of the Indian Institution of Industrial Engineering, vol XXXI NO.1.
B. V. A. Rao, M. Adithan and M. Anthony Xavior (2000), Prevention of noise pollution in an Industrial environment, The journal of Industrial Pollution Control Vol. 16 (1), pp. 117- 123.
M. Anthony Xavior (2000), Concurrent Engineering – an effective tool for product development, Journal of the Indian Institution of Industrial Engineering , Vol XXIX NO.5, pp 12 – 17.
M. Anthony Xavior (1999), Management of Product Development and Innovation, “ABHIGYAN” – Journal of Foundation for Organisational Research and Education” Vol. XVII, No. 4, pp.9 – 14.