DREAMP USER GUIDE


ATTENTION! NO SPECIAL TRAINING IS REQUIRED WHEN WORKING WITH OUR PRODUCT. HOWEVER, BEFORE USING THE DEVICE, PLEASE READ THESE USER’S MANUAL CAREFULLY AND FOLLOW THE RECOMMENDATIONS. 

1.  General


The device is designed to restore and develop intellectual abilities and to form an emotional balance. The Device is a portable source of weak harmonic electrical signals designed to positively influence the activity of the human cerebral cortex. It is controlled wirelessly. Operation of the device implies the use of a smartphone. Detailed purpose and methods of application are approved and described in the Recommendations for Use.


2. Technical Requirements and Completeness


Technical Requirements  and Completeness are approved and described in the Specifications.


3. Preparation and Work Procedure


Use the device in the following sequence:

1. The electrodes must be placed on the scalp as follows: the black-marked electrode in the middle of the forehead, the red-marked electrodes near the ears (behind the auricle) in a hair-free area. It is allowed to install electrodes on the tragus of the ear (in front of the auricle) - in this case, the effect of using the device may decrease.


2. Connect the electrode cable to the device.


3. Turn on the device - hold the Power Button for 2 - 3 seconds on the device until the white light indication appears (the LED next to the power button will light up). Next, you need to open the Dreamp App on your smartphone. After downloading the application, a list of nearby devices will appear, select the "Dreamp" device. A menu with exposure programs will open after adding your device.


4. Select an Exposure Program and press the "START" button in the application. An electrical signal will be sent to the electrodes. In the application, use the Exposure Control regulator to increase the intensity of exposure until any sensations appear on the electrodes or “blinking” in the lateral fields of view. It is recommended to reduce the intensity of exposure until these effects disappear. The countdown of the remaining exposure time of the current program will also start, after which the exposure will stop automatically.


5. Close the application, the device will turn off the power automatically.


4. Maintenance


The Device requires no special maintenance.


5. Storage Regulations


The Device must be transported at temperatures between -20°C and +45°C, observing the following rules:


– careful handling, avoiding blows;

– protection against moisture.


The Device should be stored indoors at a temperature of between +5°C and +25°C and a relative humidity of no more than 70%.

Do not store the Device near heaters, cookers, fireplaces, etc. 

6. Safety Requirements


The Safety Requirements are approved and described in Dreamp Safety Information.

7. Manufacturer's Warranties


The Dreamp Device is manufactured by TECHZAHITA LLC according to TU 28.99.39-001-72753768-2022

The warranty period for the Device is 1 year from the date of sale.

The service life of the Device is 3 years from the date of sale.

The manufacturer is not responsible and does not guarantee the normal operation of the Device in the event of:


- non-observance of operating rules;

- careless storage or transportation;

- changes made by the consumer to the design of the product;

- disassembly of the device.