Virupakshappa Lakkannavar, Yogesha K.B., C. Durga Prasad, Rakesh Kumar Phanden, Srinivasa G, Chandrashekar Prasad, Thermal Spray Coatings on High-Temperature Oxidation and Corrosion Applications – A comprehensive review, Results in Surfaces and Interfaces, Elsevier Science, vol. 15, (2024), 100250, ISSN 2666-8459, https://doi.org/10.1016/j.rsurfi.2024.100250
C. Durga Prasad, Nagaraja K. C, Rajeev Shrivastava, Amit Tiwari, Studies on wear and microstructure assessment of WC-Co reinforced iron based HVOF coating, Results in Surfaces and Interfaces, Elsevier Science, vol. 15, (2024), 100237, ISSN 2666-8459, https://doi.org/10.1016/j.rsurfi.2024.100237.
C Durga Prasad, Yugesh A Kharche, Gautam Jalba Narwade, “Oxidation Characteristics of Thermal Sprayed Cobalt - Based Superalloy Coatings: A Review”, Surface Review and Letters, (2024) (Status: In Press, Q2, IF: 1.15, SCI/SCIE), https://doi.org/10.1142/S0218625X24300119
G. Anjaneya, S. C Durga Prasad, “Performance analysis and optimization of thermal barrier coated piston diesel engine fuelled with biodiesel using RSM”, Case Studies in Thermal Engineering, Elsevier Science, vol. 57, (2024), 104351, ISSN:2214-157X, https://doi.org/10.1016/j.csite.2024.104351
N Praveen, Siddesh Kumar N.G, C Durga Prasad, “Effect of Pulse Time (Ton), Pause Time (Toff), Peak Current (Ip) on MRR and Surface Roughness of Cu-Al-Mn Ternary Shape Memory Alloy Using Wire EDM”, Journal of Materials Research and Technology, Elsevier Science, vol. 30, (2024), pp 1843-1851, (Q1, IF: 6.4) https://doi.org/10.1016/j.jmrt.2024.03.122
Suresh Kumar S, C Durga Prasad, Harish Hanumanthappa, Ranjeet Kumar Choudhary & Shrishail B. Sollapur “Numerical Analysis of Thermal Spray Coatings Using Artificial Neural Networks (ANN) Overview”, International Journal on Interactive Design and Manufacturing (IJIDeM), Springer, (2024), (Status: In Press, Q2, IF: 2.2, Scopus), https://doi.org/10.1007/s12008-024-01881-4
C. Durga Prasad, K. S. Rudra, Prakash Kumar & C. R. Aprameya, “Evaluation of Microstructural and Mechanical Properties of Tribaloy based Composite Cladding by Microwave Heating. Journal of The Institution of Engineers (India): Series D, Springer, (2024). (Status: In Press, Q2, Scopus) https://doi.org/10.1007/s40033-024-00670-3
Giridhar S. Kulkarni, N. G. Siddeshkumar, C. Durga Prasad, B. Latha Shankar, “Synthesis and Investigation on Mechanical Properties of Hybrid FRP Composite Using Taguchi Technique”, Journal of The Institution of Engineers (India): Series D, Springer, (2024). (Status: In Press, Q2, Scopus) https://doi.org/10.1007/s40033-024-00664-1
Ramesh M R, Subbarao Medabalimi, R Suresh Kumar, C Durga Prasad, Shrishail B Sollapur, “Cyclic Oxidation and Hot Corrosion Behaviour of HVOF Sprayed NiCrAl Coating on Industrial Boiler Tube Steels”, JOM The Journal of The Minerals, Metals & Materials Society (TMS), Springer, vol. 76, pp 3172–3184, (2024), (Q2, IF: 2.937, SCI/SCIE). https://doi.org/10.1007/s11837-024-06526-1
Ravikumar M, Suresh R, Durga Prasad C, “Study on Mechanical, Tribological and Fracture Behavior of n-Al2O3 Reinforced Al7075 Composites using Taguchi Technique”, ”, International Journal of Cast Metals Research, Taylor and Francis, (2024), (Status: Accepted, Q2, SCI, IF: 1.4).
N. G. Siddeshkumar, C. Durga Prasad, R. Suresh, “Investigation of Mechanical and Metallurgical Properties of Friction Welded Joints for Dissimilar Metals (HSS M2 and EN8 Steel)” Journal of The Institution of Engineers (India): Series D, Springer, (2024). (Status: In Press, Q2, Scopus) https://doi.org/10.1007/s40033-024-00658-z
Durga Prasad Channabasavaiah, Shashank Karigowda, Bhakthi Bhandari Yashas Guptha, Arkesh Prasannakumar, Shreyas Govindappa, Sampath Kumar Ramappa, Pardeep Singh; Design and fabrication of air cooler to improve its performance. AIP Conf. Proc. vol. 20 (2024); 2986 (1): 030145. https://doi.org/10.1063/5.0192440
Siddesh Kumar N G, R Suresh, C Durga Prasad, L. Shivaramu, N H Siddalingswamy, “Study on Tool Wears in Turning Al2219, Unhybrid and Hybrid Metal Matrix Nano Composites By CCD Design of Experiment”, Part C: Journal of Mechanical Engineering Science, (2024), (Status: Accepted, Q2, IF: 2.0, SCI/Scopus)
Virupakshappa Lakkannavar, Yogesha K B, C Durga Prasad, Mruthunjaya M, Suresh R, “A Review on Tribological and Corrosion Behavior of Thermal Spray Coatings”, Journal of The Institution of Engineers (India): Series D, Springer, (2024). (Status: In Press, Q2, Scopus) https://doi.org/10.1007/s40033-024-00636-5
Haridasa Nayak, C Durga Prasad, Nagabhushana N, “Development of Equal Proportional YSZ+Al2O3 Thermal Barrier Coating and Effect of Coating Thickness on the Corrosion Behaviour on Cast Iron Substrate”, High-Temperature Corrosion of Materials, Springer, vol. 101, pp 291–308, (2024), (Q2, IF: 2.2, SCI/Scopus), https://doi.org/10.1007/s11085-024-10222-5
Suresh Kumar S, C Durga Prasad, Harish Hanumanthappa, “Role of Thermal Spray Coatings on Erosion, Corrosion, and Oxidation in Various Applications: A Review”, Journal of Bio- and Tribo-Corrosion, Springer, vol. 10, 22 (2024). (Q1, IF: 3.31, Scopus). https://doi.org/10.1007/s40735-024-00822-8
N. Praveen, U. S. Mallik, A. G. Shivasiddaramaiah, C. Durga Prasad, “Machinability Study of Cu-Al-Mn Shape Memory Alloys using Taguchi Method”. Journal of The Institution of Engineers (India): Series D, Springer, (2024). (Q2, Scopus) https://doi.org/10.1007/s40033-023-00629-w
Sujan Chakraborty, Mahantesh M. Math, & C. Durga Prasad, “Analysis and Optimization of Process Parameters to Develop Nanohybrid Composites of Vanadium Pentoxide/Reduced Graphene Oxide”, Journal of The Institution of Engineers (India): Series D, Springer, (2023), (Q2, Scopus) https://doi.org/10.1007/s40033-023-00618-z
N. G. Siddeshkumar, R. Suresh, C. Durga Prasad, L. Shivaram, N. H. Siddalingaswamy, “Evolution of the Surface Quality and Tool Wear in the High Speed Turning of Al2219/n-B4C/MoS2 Metal Matrix Composites”, International Journal of Cast Metals Research, Taylor and Francis, (2023), vol. 37, Issue: 1. (Q2, SCI, IF: 1.4). https://doi.org/10.1080/13640461.2023.2285177
Praveen N , U S Mallik, A G Shivasiddaramaiah, Nagabhushana N , C Durga Prasad, “Effect of CNC End Milling Parameters on Cu-Al-Mn Ternary Shape Memory Alloys using Taguchi Method”, Journal of The Institution of Engineers (India): Series D, Springer, (2023)., (Q2, Scopus) https://doi.org/10.1007/s40033-023-00579-3
C. Durga Prasad, T. Jagadeesha & B. N. Prashanth, “Investigations on Tribological and Microstructure Characteristics of WC-12Co/FeNiCrMo Composite Coating by HVOF Process”. JOM The Journal of The Minerals, Metals & Materials Society (TMS), Springer, vol. 76, pp 186–195, (2024). (Q2, IF: 2.937, SCI/SCIE). https://doi.org/10.1007/s11837-023-06242-2
Srinivasa Chari V, Suyog Jhavar, T. N. Sreenivasa, Harish Hanumanthappa, C Durga Prasad, Bharath Kumar Shanmugam, “Impact of Post-Processing Techniques on the Wear Resistance of Plasma Beam treatment on SS316L Components”, Journal of The Institution of Engineers (India): Series D, Springer, (2023). (Q2, Scopus) https://doi.org/10.1007/s40033-023-00584-6
Santhosh Gotagunaki, Vardhaman S. Mudakappanavar, R. Suresh & C. Durga Prasad, “Studies on the Mechanical Properties and Wear Behavior of an AZ91D Magnesium Metal Matrix Composite Utilizing the Stir Casting Method”, Metallography, Microstructure, and Analysis, Springer, vol. 12, pp 986–998, (2023). (Q2, IF: 1.6, Scopus), https://doi.org/10.1007/s13632-023-01017-2
Pooja Sangwan, Rakesh Kumar, Yogita Sharma, Digvijay G. Bhosale & C Durga Prasad, Application of computing in recognition of input design factors for vapour-grown carbon nanofibers through fuzzy cluster analysis. International Journal on Interactive Design and Manufacturing (IJIDeM), Springer, (2023), (Q2, IF: 2.2, Scopus), https://doi.org/10.1007/s12008-023-01547-7
K. S. Lokesh, K. Shashank Kumar, N. Keerthan, R. Revanth, S. Sandeep, Sunil B. Lakkundi, V. Bharath, Harish Hanumanthappa, Durga Prasad C & Bharath Kumar Shanmugam, “Experimental Analysis of the Rice Husk and Eggshell Powder-Based Natural Fibre Composite”. Journal of The Institution of Engineers (India): Series D, Springer, (2023)., (Q2, Scopus) https://doi.org/10.1007/s40033-023-00557-9
G. Srinivasa Rao, Usha Mukkamala, Harish Hanumanthappa, C. Durga Prasad, Bharath Shanmugam & K. Ch. Kishore Kumar, “Evaluating and optimizing surface roughness using genetic algorithm and artificial neural networks during turning of AISI 52100 steel. International Journal on Interactive Design and Manufacturing (IJIDeM), Springer, (2023), (Q2, IF: 2.2, Scopus), https://doi.org/10.1007/s12008-023-01549-5
C. Manjunatha, T. N. Sreenivasa, P. Sanjay & C. Durga Prasad, “Optimization of Friction Stir Welding Parameters to Enhance Weld Nugget Hardness in AA6061-B4C Composite Material”. Journal of The Institution of Engineers (India): Series D, Springer, (2023)., (Q2, Scopus) https://doi.org/10.1007/s40033-023-00562-y
C. Durga Prasad, N. Nagabhushana, “Characterisation and wear behaviour of SiC reinforced FeNiCrMo composite coating by HVOF process”, Transactions of the IMF, Taylor and Francis, vol. 102:1, pp 22-28 (2024), (Q2, IF: 1.679, SCI), https://doi.org/10.1080/00202967.2023.2246259
M. Arunadevi, Monisha Rani, R. Sibinraj, M.K. Chandru, C. Durga Prasad, “Comparison of k-nearest Neighbor & Artificial Neural Network prediction in the mechanical properties of aluminum alloys”, Materials Today: Proceedings, (2023), (Status: In press, Q2, Scopus). , https://doi.org/10.1016/j.matpr.2023.09.111
Mohammed Asif Kattimani, Venkatesh P R, Kirthan L J, Mahantesh M Math, Prapul Chandra A C, Ramakrishna Hegde, C Durga Prasad, “Design and Optimization of Fatigue Life Studies on Induction Hardened IN718 Alloy for Gas Turbine Applications”, Advances in Materials and Processing Technologies, Taylor and Francis, (2023), (Status: In press, Q2, IF: 2.37, Scopus). https://doi.org/10.1080/2374068X.2023.2256121
Sharanabasava H, Raviprakash M, C Durga Prasad, M. R. Ramesh, “Microstructure, Mechanical and Wear Properties of SiC and Mo Reinforced NiCr Microwave Cladding”, Advances in Materials and Processing Technologies, Taylor and Francis, (2023), (Status: In press, Q2, IF: 2.37, Scopus). https://doi.org/10.1080/2374068X.2023.2257937
Ashok kumar.R.Tavadi, Nagabhushana N, Vivek Bhandarkar V N, Jagadeesha T, Mohammad Rafi Kerur, Rudresha S, C Durga Prasad, “Investigation on Mechanical and Sliding Wear Behaviour of Pongamia-oil-cake/basalt fibre reinforced Epoxy Hybrid Composites”, Arabian Journal for Science and Engineering, Springer, vol. 49, pp 2311–2325, (2024), (Q1, IF: 2.9, SCIE/Scopus). https://doi.org/10.1007/s13369-023-08207-8
Mohammed Asif Kattimani, P R Venkatesh , Habib Masum, Mahantesh M Math , Vikram N Bahadurdesai, Syed Mustafkhadri, C Durga Prasad, “Design and Numerical Analysis of Tensile Deformation and Fracture Properties of Induction Hardened Inconel 718 Superalloy for Gas Turbine Applications”, International Journal on Interactive Design and Manufacturing (IJIDeM), Springer, (2023), (Q2, IF: 2.2, Scopus), https://doi.org/10.1007/s12008-023-01452-z
A. Rajesh Kannan, C. Durga Prasad, V. Rajkumar, N. Siva Shanmugam, V. Rajkumar, Wonjoo Lee, Jonghun Yoon, “Hot Oxidation and Corrosion Behaviour of Boiler Steel Fabricated by Wire Arc Additive Manufacturing”, Materials Characterization, Elsevier Science, Volume 203, September (2023), 113113, (Q1, IF: 4.537, SCI) https://doi.org/10.1016/j.matchar.2023.113113
Giridhar S. Kulkarni, N. G. Siddeshkumar, C. Durga Prasad, Latha Shankar & R. Suresh, “Drilling of GFRP with Liquid Silicon Rubber Reinforced with fine Aluminium Powder on Hole Surface Quality and Tool Wear using DOE”, Journal of Bio- and Tribo-Corrosion, Springer, vol. 9, Article number: 53 (2023), (Q2, IF: 3.31, Scopus), https://doi.org/10.1007/s40735-023-00771-8
Sudheer D Kulkarni, Manjunatha, Chandrasekhar U, K V Manjunath, C Durga Prasad, “Design and Optimization of Polyvinyl-Nitride Rubber for Tensile Strength Analysis”, International Journal on Interactive Design and Manufacturing (IJIDeM), Springer, (2023), (Q2, IF: 2.2, Scopus), https://doi.org/10.1007/s12008-023-01405-6
37. N Praveen , U S Mallik, A G Shivasiddaramaih, R. Suresh , C Durga Prasad, L. Shivaramu, “Synthesis and Wire EDM Characteristics of Cu–Al–Mn Ternary Shape Memory Alloys Using Taguchi Method”, Journal of The Institution of Engineers (India): Series D, Springer, (2023)., (Q2, Scopus) https://doi.org/10.1007/s40033-023-00501-x
Mahantesh M Math, Rajeswara Rao K V S, Prapul Chandra A C, M N Vijayakumar, B Nandini, C Durga Prasad, “Design and Modeling using Finite Element Analysis for the Sitting Posture of Computer Users Based on Ergonomic Perspective”, International Journal on Interactive Design and Manufacturing (IJIDeM), Springer, (2023), (Q2, IF: 2.2, Scopus). https://doi.org/10.1007/s12008-023-01383-9
G Anjaneya, S Sunil, Shrishail Kakkeri, Mahantesh M Math, M N Vaibhav, C Solaimuthu, C Durga Prasad, Hitesh Vasudev, “Numerical Simulation of Microchannel Heat Exchanger using CFD”, International Journal on Interactive Design and Manufacturing (IJIDeM), Springer, (2023), (Q2, IF: 2.2, Scopus). https://doi.org/10.1007/s12008-023-01376-8
Madhu Sudana Reddy G, C Durga Prasad, Aprameya C R, “Investigation of High-Temperature Erosion Behaviour of NiCrAlY/TiO2 Plasma Coatings on Titanium Substrate”, JOM The Journal of The Minerals, Metals & Materials Society (TMS), Springer, vol. 75, pp 3317–3323, (2023) (Q2, IF: 2.937, SCI/SCIE). https://doi.org/10.1007/s11837-023-05894-4
Pulla Nagabhushana, S Ramprasad, C Durga Prasad, “Numerical Investigation on Heat Transfer of a Nano-Fluid Saturated Vertical Composite Porous Channel Packed between Two Fluid Layers”, International Journal on Interactive Design and Manufacturing (IJIDeM), Springer, (2023), (Q2, IF: 2.2, Scopus). https://doi.org/10.1007/s12008-023-01379-5
K. Shanthala M., Ajit M. Hebbale, C. Durga Prasad, M Muralidhar Singh, H. Harish, Shashank Karigowda, , “Analysis of High Velocity Forming of Metallic Tubes”, Materials Today Proceedings, Elsevier Science, (2023) In Press, https://doi.org/10.1016/j.matpr.2023.04.647
N Praveen , U S Mallik, A G Shivasiddaramaih, R. Suresh, L. Shivaramu, C Durga Prasad, "Design and Analysis of Shape Memory Alloys using Optimization Techniques", Advances in Materials and Processing Technologies, Taylor and Francis, (2023), (Status: In Press, Q2, IF: 2.37, Scopus) https://doi.org/10.1080/2374068X.2023.2208021
Madhusudana Reddy G, C Durga Prasad, Pradeep Patil, Naresh Kakur, and Ramesh M R, “High Temperature Erosion Performance of NiCrAlY/Cr2O3/YSZ Plasma Spray Coatings”, Transactions of the IMF, Taylor and Francis, (2023), (Status: In press, Q2, IF: 1.679, SCI), https://doi.org/10.1080/00202967.2023.2208899
M. Muralidhar Singh, Ajit M. Hebbale, C. Durga Prasad, H. Harish, Manish Kumar, K. Shanthala, “Design and Simulation of Vertical Axis Windmill for Streetlights”, Materials Today Proceedings, Elsevier Science, (2023) In Press, https://doi.org/10.1016/j.matpr.2023.03.729
Mohan Poojari, Harish Hanumanthappa, C Durga Prasad, Harshitha Madhusoodan Jathanna, Ananth Raj Ksheerasagar, Prathiksha Shetty, Bharath Kumar Shanmugam, “Computational Modelling for the Manufacturing of Solar-Powered Multifunctional Agricultural Robot”, International Journal on Interactive Design and Manufacturing (IJIDeM), Springer, (2023), https://doi.org/10.1007/s12008-023-01291-y (Q2, IF: 2.2, Scopus).
Manjunatha C. J, Durga Prasad C, Harish Hanumanthappa, Rajesh Kannan A, Dhanesh G. Mohan, Bharath Kumar Shanmugam, Venkategowda C, “Influence of Microstructural Characteristics on Wear and Corrosion Behaviour of Si3N4 Reinforced Al2219 Composites”, Advances in Materials Science and Engineering, Hindawi, vol. 2023, Article ID 1120569, (2023), https://doi.org/10.1155/2023/1120569 (Q2, IF: 2.09, SCI).
Sharanabasva H, C Durga Prasad, Ramesh M R, “Characterization and Wear Behavior of NiCrMoSi Microwave Cladding”, Journal of Materials Engineering and Performance, (2023), https://doi.org/10.1007/s11665-023-07998-z (Q2, IF: 2.1, SCI).
A. Rajesh Kannan, V. Rajkumar, C. Durga Prasad, N. Siva Shanmugam, Jonghun Yoon, Microstructure and hot corrosion performance of stainless steel 347 produced by wire arc additive manufacturing, Vacuum, Elsevier Science (2023), 111901, ISSN 0042-207X, https://doi.org/10.1016/j.vacuum.2023.111901. (Q1, IF: 4.11, SCI).
Madhusudana Reddy G, C Durga Prasad, Pradeep Patil, Naresh Kakur, and Ramesh M R, “Investigation of Plasma Sprayed NiCrAlY/Cr2O3/YSZ Coatings on Erosion Performance of MDN 420 Steel Substrate at Elevated Temperatures”, Int. J. of Surface Science and Engineering, (2023), vol. 17, No. 3, pp.180–194. (Q2, IF: 1.1, SCI). http://dx.doi.org/10.1504/IJSURFSE.2023.10054266
Sharanabasva H, C Durga Prasad, Ramesh M R, “Effect of Mo and SiC reinforced NiCr Microwave Cladding on Microstructure, Mechanical and Wear Properties”, Journal of The Institution of Engineers (India): Series D, Springer, (2023). (Q2, Scopus). https://doi.org/10.1007/s40033-022-00445-8
Nithin H S, Nishchitha K M, Pradeep D G, Durga Prasad C, Mahantayya Mathapati, “Comparative Analysis of CoCrAlY Coatings at High Temperature Oxidation Behavior Using Different Reinforcement Composition Profiles”, Welding in the World, Springer, vol. 67, pp 585–592, (2023) (Q1, IF: 2.2, SCI) https://doi.org/10.1007/s40194-022-01405-2
Naveen D.C, Naresh Kakur, Keerthi Gowda B.S, Madhu Sudana Reddy G, Durga Prasad C, Ragavanantham Shanmugam, “Effects of Polypropylene Waste Addition as Coarse Aggregate in Concrete: Experimental Characterization and Statistical Analysis”, Advances in Materials Science and Engineering, Hindawi, vol. 2022, Article ID 7886722, 11 pages, (2022), https://doi.org/10.1155/2022/7886722. (Q2, IF: 2.09, SCI)
Venkate Gowda, Harish Hanumanthappa, Bharath Kumar Shanmugam, C Durga Prasad, T. N. Sreenivasa, M S Rajendra Kumar. “High-Temperature Tribological Studies on Hot Forged Al6061- Tib2 In-Situ Composites”, Journal of Bio and Tribo-Corrosion, Springer, vol. 8, 101 (2022). (Q1, IF 3.11). https://doi.org/10.1007/s40735-022-00699-5
Madhusudana Reddy G, C Durga Prasad, Gagan Shetty, Ramesh M R, Nageswara Rao T, and Pradeep Patil, “Investigation of Thermally Sprayed NiCrAlY/TiO2 and NiCrAlY/Cr2O3/YSZ Cermet Composite Coatings on Titanium Alloys”. Engineering Research Express, IOP, vol 4, 025049, https://doi.org/10.1088/2631-8695/ac7946
Madhusudana Reddy G, C Durga Prasad, Pradeep Patil, Naresh Kakur, and Ramesh M R, “Elevated Temperature Erosion Performance of Plasma Sprayed NiCrAlY/TiO2 Coating on MDN 420 Steel Substrate”, Surface Topography: Metrology and Properties, IOP, vol.10, 025010, (2022), (Q2, IF: 2.1, SCIE). https://doi.org/10.1088/2051-672X/ac6a6e
Madhusudana Reddy G, C Durga Prasad, Gagan Shetty, Ramesh M R, Nageswara Rao T and Pradeep Patil. “High Temperature Oxidation Behavior of Plasma Sprayed NiCrAlY/TiO2 & NiCrAlY /Cr2O3/YSZ Coatings on Titanium Alloy”. Welding in the World, Springer, (2022) (Q1, IF: 2.2, SCI) https://doi.org/10.1007/s40194-022-01268-7
Thavaraya Naik, Mahantayya Mathapathi, C Durga Prasad, Nithin H S and M. R. Ramesh, “Effect of Laser Post Treatment on Microstructural and Sliding Wear Behavior of HVOF Sprayed NiCrC and NiCrSi Coatings”. Surface Review and Letters, vol. 29, No. 1 (2022) 225000, (Q2, IF: 1.15, SCI/SCIE), https://doi.org/10.1142/S0218625X2250007X.
Madhusudana Reddy G, C Durga Prasad, Gagan Shetty, Ramesh M R, Nageswara Rao T and Pradeep Patil. “High-Temperature Oxidation Studies of Plasma Sprayed NiCrAlY/TiO2 & NiCrAlY /Cr2O3/YSZ Cermet Composite Coatings on MDN-420 Special Steel Alloy”. Metallography, Microstructure and Analysis, Springer, (Q2) vol. 10, pp 642–651 (2021) https://doi.org/10.1007/s13632-021-00784-0
Mahantayya Mathapati, Kiran Amate, C Durga Prasad, Jayavardhana M L, Hemanth Raju T, “A Review on Fly ash Utilization”. Materials Today Proceedings, Elsevier Science, vol. 50, Part 5, 2022, pp 1535-1540. https://doi.org/10.1016/j.matpr.2021.09.106
Rayirth Dinesh, Rohan Raykar S, Rakesh T L, Prajwal M G, Shashank Lingappa M and Durga Prasad C. “Feasibility study on MoCoCrSi/ WC-Co cladding developed on austenitic stainless steel using microwave hybrid heating”. Journal of Mines, Metals & Fuels, vol. 69, Issue 12A, December 2021, https://doi.org/10.18311/jmmf/2021/30113
C. Durga Prasad, Shashank Lingappa, Sharnappa Joladarashi, M. R Ramesh, Sachin B, “Characterization and Sliding Wear Behavior of CoMoCrSi+Flyash Composite Cladding Processed by Microwave irradiation”, Materials Today Proceedings, Elsevier Science, vol 46, (2021), pp 2387-2391, https://doi.org/10.1016/j.matpr.2021.01.156
G. Madhu, K. M. Mrityunjaya Swamy, Durga Ajay Kumar, C. Durga Prasad, and U Harish, “Evaluation of hot corrosion behavior of HVOF thermally sprayed Cr3C2 -35NiCr coating on SS 304 boiler tube steel”, American Institute of Physics, 2316, 030014 (2021); https://doi.org/10.1063/5.0038279
Madhu Sudana Reddy, C Durga Prasad, Pradeep Patil, M. R. Ramesh, Nageswara Rao, “Hot corrosion behavior of plasma sprayed NiCrAlY/TiO2 and NiCrAlY/Cr2O3/YSZ cermets coatings on alloy steel”, Surfaces and Interfaces, Elsevier Science, vol. 22 (2021) 100810. (IF 4.837) https://doi.org/10.1016/j.surfin.2020.100810
C. Durga Prasad, Sharnappa Joladarashi, M. R. Ramesh, M. S. Srinath, “Microstructure and Tribological Resistance of Flame Sprayed CoMoCrSi/WC-CrC-Ni and CoMoCrSi/WC-12Co Composite Coatings Remelted by Microwave Hybrid Heating”. Journal of Bio and Tribo-Corrosion, Springer, (2020), vol. 6:124, (IF 3.11). https://doi.org/10.1007/s40735-020-00421-3
C. Durga Prasad, Sharnappa Joladarashi, M. R Ramesh, “Comparative Investigation of HVOF and Flame Sprayed CoMoCrSi Coating”. American Institute of Physics, vol. 2247, 050004 (2020) https://doi.org/10.1063/5.0003883
C. Durga Prasad, Akhil Jerri, M. R. Ramesh, “Characterization and Sliding Wear Behavior of Iron Based Metallic Coating Deposited by HVOF Process on Low Carbon Steel Substrate”. Journal of Bio and Tribo-Corrosion, Springer, vol. 6, 69 (2020). (IF 3.11). https://doi.org/10.1007/s40735-020-00366-7
C. Durga Prasad, Sharnappa Joladarashi, M. R. Ramesh, M. S. Srinath, B. H. Channabasappa. “Comparison of High Temperature Wear Behavior of Microwave Assisted HVOF Sprayed CoMoCrSi-WC-CrC-Ni/WC-12Co Composite Coatings”. Silicon, Springer, (2020) pp 1-19 (IF 2.670, SCIE). https://doi.org/10.1007/s12633-020-00398-1
C. Durga Prasad, Sharnappa Joladarashi, M. R. Ramesh, M. S. Srinath, B. H. Channabasappa. “Effect of Microwave Heating on Microstructure and Elevated Temperature Adhesive Wear Behavior of HVOF Deposited CoMoCrSi-Cr3C2 Composite Coating”. Surface and Coatings Technology, Elsevier Science, vol. 374, pp 291–304, (2019),(IF 4.158, SCI). https://doi.org/10.1016/j.surfcoat.2019.05.056
C. Durga Prasad, Sharnappa Joladarashi, M. R. Ramesh, M. S. Srinath, B. H. Channabasappa. “Development and Sliding Wear Behavior of Co-Mo-Cr-Si Cladding through Microwave Heating”. Silicon, Springer, vol.11 pp 2975-2986, (2019),(IF 2.670, SCIE), https://doi.org/10.1007/s12633-019-0084-5
C. Durga Prasad, Sharnappa Joladarashi, M. R. Ramesh, M. S. Srinath, B. H. Channabasappa. “Microstructure and Tribological Behavior of Flame Sprayed and Microwave Fused CoMoCrSi/CoMoCrSi-Cr3C2 Coatings”. Materials Research Express, vol. 6 (2019), 026512, (IF 1.61, SCIE). https://doi.org/10.1088/2053-1591/aaebd9
C. Durga Prasad, Sharnappa Joladarashi, M. R. Ramesh, M. S. Srinath, B. H. Channabasappa. “Influence of Microwave Hybrid Heating on the Sliding Wear Behaviour of HVOF Sprayed CoMoCrSi Coating”. Materials Research Express, 5 (2018):086519 (IF 1.61, SCIE). https://doi.org/10.1088/2053-1591/aad44e.
C. Durga Prasad, Sharnappa Joladarashi, M. R Ramesh, Anunoy Sarkar. “High Temperature Gradient Cobalt based Clad Developed Using Microwave Hybrid Heating”. American Institute of Physics, (2018), vol. 1943, 020111 https://doi.org/10.1063/1.5029687.
Girisha K G, K.V.Sreenivas Rao, Durga Prasad C, “Slurry Erosion Resistance of Martenistic Stainless Steel with Plasma Sprayed Al2O3-40%TiO2 Coatings”, Materials Today Proceedings, Elsevier Science, vol. 5 (2018), pp 7388–7393. https://doi.org/10.1016/j.matpr.2017.11.409
Girisha K.G, Durga Prasad C, Anil K.C and K.V Sreenivas Rao, “Dry sliding wear behaviour of Al2O3 coatings for AISI 410 grade stainless steel” , Applied Mechanics and Materials, vol 766-767, (2015), pp 585-589, https://doi.org/10.4028/www.scientific.net/AMM.766-767.585
Girisha K.G, Rakesh. R, Durga Prasad C and K.V Sreenivas Rao, “Development of corrosion resistance coating for AISI 410 grade steel”, Applied Mechanics and Materials, vol 813-814, (2015) pp 135-139. https://doi.org/10.4028/www.scientific.net/AMM.813-814.135
C Durga Prasad. “Design and Fabrication of Integrated Sanitizer Chamber to Combat COVID-19”. Public Health, Elsevier Science (Status: Under review)