Go for AC servicing when cooling is not as per expectations or AC is not serviced for last 3 months. Regular servicing saves upto 25% on electricity bill and needless to say, it increases the age of your AC.

AC servicing take 20-45 minutes depending on the size of the AC whereas Installation/Dismantle/gas charging of AC may take 30-60 minutes. Time required to repair AC will depend upon the real issue/problem identified by our champs.

Regular filter replacement helps your heating and cooling system operate at peak levels and improves indoor air quality. It is important to change filters regularly to ensure proper air flow and to keep your home free from dust, allergens and germs. Depending on the type of filter you have, you may require weekly or monthly filter replacements. Your Acservicewala Experts service or installation technician will recommend the ideal filters and replacement schedules for your unit(s).

A few quick tips:

• Clean and replace your filters frequently.

• Your system will cool more evenly when the blower is in the “on” position. The blower provides constant air movement throughout the home, and allows for better filtration.

• Install shades, drapes, shutters, or screens on windows that are exposed to extreme sunlight to keep room temperatures at moderate levels.

ANSWER

Keep all doors and windows closed to make the air conditioner work efficiently. This ensures that the cool or warm air stays inside the room to keep the room temperature at a desired level.

ANSWER

• 1. AC is not powered on from remote

• 2. MCB board may be turned 'OFF'

ANSWER

Step 1: Check the MCB condition, It must be 'ON'.

Step 2: Check voltage. It should be in between 200V-240V

ANSWER

• 1. Unset Cooling mode

• 2. Dirty and Blocked filters

• 3. Low Voltage as per requirement (200V-240V)

ANSWER

Step 1: Check the mode setting and select the cooling mode.

Step 2: Select the temperature setting and set the temperature on 18°C

Step 3: Select the fan speed at ‘High’ mode.

Step 4: Clean the air filter if it is dusty.

Step 5: Check the voltage. It should be in between 200V-240V.

ANSWER

To clean the AC filter, please follow steps listed below :

Step 1: Hold the knobs of the air filter and lift it up slightly and take out the air filter from AC indoor unit.

Step 2: Clean the air filter with normal temperature water and brush.

Step 3: Wait until the air filter completely become dry.

Step 4: Re-fix the dry and cleansed air filter in the AC indoor unit.

*Note: - For better cooling performance, clean the AC filter in every 15 days.

ANSWER

To resolve the leaking issue, please follow steps listed below :

Step 1: Drain pipe should be inclined downward direction.

Step 2: End point of drain pipe should not be dipped into water body/bucket

Step 3: Clean the air filter after every 20 days.

Step 4: Run the AC on M'SOON Mode

*Note: - If the air has more moisture then the water droplets may occurs due to the difference in temperature. It is normal to have lite water drops due to excessive moisture after rain.

ANSWER

To resolve the water droplets on AC panel issue, please follow steps listed below :

Step 1: This is a process of circulating cold refrigerant in pipe.

Step 2: Outdoor Unit always be kept under shade.

Step 3: Press 'Mode' key until ‘Drop’ symbol is reflecting on Remote.

*Note: - It is normal to have light water drops due to excessive moisture in rainy season.

ANSWER

At a minimum, clean air filters inside the indoor unit regularly to remove dust and dirt built up on them, which will restrict the airflow from the unit. Ask a professional installer to provide a demonstration of how to maintain your air conditioner.

ANSWER

If an air conditioner is installed correctly, it should never need to be recharged with gas. As there is no stale gas or expired gas left in the system, gas needs to be recharged only when there is a leak in the system, which must be confirmed and fixed only by a qualified service technician.