Dr. Ashwani Kumar Yadav - Journal Publications

Submit your quality article in special Issue of Buildings Journal.

Special Issue

Patent Published

Ashwani Kumar, Patent Title-An Integrated Hybrid Energy Storage System (Application No: 202211039521A, Publication Date: 22/07/2022) Country-India.
Ashwani Kumar, Patent Title-Smart Toilet Management System (Application No: 202211036216 A, Publication Date: 08/07/2022) Country-India.
Ashwani Kumar, UK Design Patent Granted Title-Industrial Hydraulic Drum Lift Machine (Design No: 6307054, Grant Date: 11/09/2023) Country-UK.
Ashwani Kumar, Patent Title-Temperature Controlled Medical Box (Application No: 202411038383A, Publication Date: 14/06/2024) Country-India.

International Journal Publications

1. Arijit Kundu, Ashwani Kumar, Mukesh Kumar Awasthi, Gaurav Dwivedi, Anoop Kumar Shukla, An Explorative Study of Earth-Air Heat Exchanger for Sustainable Building Applications, International Journal of Energy for a Clean Environment, Volume 26, Issue 3, 2025, pp. 1-22, https://doi.org/10.1615/InterJEnerCleanEnv.2024052513 (Scopus).
2. Zahrapanah Razaviyn, Milad Heidari, Sivasakthivel Thangavel, Vikas Verma, Ashwani Kumar, Ashok Kumar Yadav, Marine energy harvesting from fluid flow via vortex induced vibrations, International Journal of Thermofluids, Volume 25, 2025, 101015, https://doi.org/10.1016/j.ijft.2024.101015 (Scopus).
3. Dan Singh Pimoli, Pritosh Tomar, Ashwani Kumar, Gaurav Dwivedi, Anoop Kumar Shukla, Experimental Investigation of Friction Factor and Heat Transfer Enhancement Using Circular Perforated Twisted Tape Inserts in Heat Exchangers, International Journal of Energy for a Clean Environment, 2025, https://doi.org/10.1615/InterJEnerCleanEnv.2024053616 (Scopus).
4. M.Mokhtari, S. Jamei, Z. Razaviyan, M. Heidari, S. Thangavel, Ashwani Kumar, Numerical and hydrodynamic analysis of a container vessel due to the change of collision wave angle at different speeds in regular wave , Journal of Mechanical Engineering and Sciences, 2024, Vol. 18 (4), 10247-10260,https://doi.org/10.15282/jmes.18.4.2024.3.0809 (WoS, Impact Factor 1.1).
5. Pritosh Tomar, Prateek Chauhan, Ashwani Kumar, Anoop Kumar Shukla. Numerical Investigation of Thermal Performance Enhancement of Solar Reservoir Using Flash Cycle, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 2024, Vol. 123, Issue 1, pp. 197-221, https://doi.org/10.37934/arfmts.123.1.197221 (Scopus).
6. Nitesh Dutt, Ankush Hedau, Ashwani Kumar, Mukesh Kumar Awasthi, Varun Pratap Singh, Effect of Duct Length Variation on Solar Air Heater Performance For Smooth and D-Shaped Roughened Absorber Plate, Heat Transfer, 2024, https://doi.org/10.1002/htj.23115 (Impact Factor: 3.6).
7. Dhananjay, Yadav, Mukesh Kumar Awasthi, Ashwani Kumar, and Nitesh Dutt. 2024. "Swirling Capillary Instability of Rivlin–Ericksen Liquid with Heat Transfer and Axial Electric Field" Physics 6, no. 2: 828-844. https://doi.org/10.3390/physics6020051 (Impact Factor: 3.6).

1. Awasthi MK, Shukla AK, Kumar A, Yadav D, Dutt N,. Viscous correction to the potential flow analysis of Rayleigh–Taylor instability in a Rivlin–Ericksen viscoelastic fluid layer with heat and mass transfer. Heat Transfer. 2024; Volume 53, Issue 6, page 3072-3088. https://onlinelibrary.wiley.com/doi/10.1002/htj.23076 (Impact Factor: 3.6).

1. Nitesh Dutt, Ankush Hedau, Ashwani Kumar, Mukesh Kumar Awasthi, Sachin Hedau, Chandan Swaroop Meena, Thermo-hydraulic performance investigation of solar air heater duct having staggered D-shaped ribs: Numerical approach. Heat Transfer, 2024, Volume 53, issue 3, 1501-1531 https://onlinelibrary.wiley.com/doi/10.1002/htj.22998 (Impact Factor: 3.6).

1. Awasthi MK, Dutt N, Kumar A, Kumar S. Electrohydrodynamic capillary instability of Rivlin–Ericksen viscoelastic fluid film with mass and heat transfer. Heat Transfer. 2024; Volume 53, issue 1,115-133. doi:10.1002/htj.22944. (Impact Factor: 3.6).

1. Vikas Verma, Chandan Swaroop Meena, Sivasakthivel Thangavel, Ashwani Kumar, Tushar Choudhary, Gaurav Dwivedi, Ground and solar assisted heat pump systems for space heating and cooling applications in the northern region of India – A study on energy and CO2 saving potential, Sustainable Energy Technologies and Assessments, Volume 59, 2023, 103405, ISSN 2213-1388, https://doi.org/10.1016/j.seta.2023.103405. (Impact Factor: 8).

1. Nitesh Dutt, Ankush Jageshwar Hedau, Ashwani Kumar, Mukesh Kumar Awasthi, Varun Pratap Singh, Gaurav Dwivedi. Thermo-hydraulic performance of solar air heater having discrete D-shaped ribs as artificial roughness. Environmental Science and Pollution Research, 2023. https://doi.org/10.1007/s11356-023-28247-9. (Impact Factor: 5.8).

1. Pravesh Kr. Kushwaha, Neelesh Kr. Sharma, Ashwani Kumar, Chandan Swaroop Meena. Recent Advancements in Augmentation of Solar Water Heaters Using Nanocomposites with PCM: Past, Present, and Future. Buildings 2023, 13, 79. https://doi.org/10.3390/buildings13010079. (Impact Factor: 3.8).

1. Ramesh Kumar, Ashwani Kumar, Laxmi Kant, Arbind Prasad, Sandeep Bhoi, Chandan Swaroop Meena, Varun Pratap Singh, Aritra Ghosh. Experimental and RSM-based Process-Parameters Optimisation for Turning Operation of EN36B Steel. Materials 2023, 16, 339. https://doi.org/10.3390/ma16010339. (Impact factor: 3.8).

1. Reddy, P. N., Verma, V., Kumar, A., Awasthi, M., 2023. CFD Simulation and Thermal Performance Optimization of Flow in a Channel with Multiple Baffles. Journal of Heat and Mass Transfer Research, 10(2), pp. 257-268. https://doi.org/10.22075/JHMTR.2023.31108.1458 (Scopus).

1. Varun Pratap Singh, Siddharth Jain, Ashish Karn, Ashwani Kumar. Experimental Assessment of Variation in Open Area Ratio on Thermohydraulic Performance of Parallel Flow Solar Air Heater”. Arabian Journal for Science and Engineering (2022), https://doi.org/10.1007/s13369-022-07525-7 (Impact factor: 2.9).

1. Chandan Swaroop Meena, Amit Nandan Prajapati, Ashwani Kumar, Manoj Kumar (2022). Utilization of Solar Energy for Water Heating Application to Improve Building Energy Efficiency: An Experimental Study. Buildings, Volume 12, 2166. https://doi.org/10.3390/buildings12122166 (Impact Factor: 3.8).

1. Sandeep Bhoi, Arbind Prasad, Ashwani Kumar, Rudra Bubai Sarkar, Bidyanand Mahto, Chandan Swaroop Meena, Chandan Pandey (2022). Experimental Study to Evaluate the Wear Performance of UHMWPE and XLPE Material for Orthopedics Application, Bioengineering, Volume 9, 676. https://doi.org/10.3390/bioengineering9110676 (Impact Factor: 4.6).

1. Varun Pratap Singh, Siddharth Jain, Ashwani Kumar, Sachin Mishra, Naveen Kumar Sharma (2022). Heat transfer and friction factor correlations development for double pass solar air heater artificially roughened with perforated multi-V ribs, Case Studies in Thermal Engineering, Volume 39,102461, ISSN 2214-157X, https://doi.org/10.1016/j.csite.2022.102461. (Impact Factor: 6.8).

1. Varun Pratap Singh, Siddharth Jain, Ashish Karn, Ashwani Kumar, Gaurav Dwivedi, Chandan Swaroop Meena (2022). Recent Developments and Advancements in Solar Air Heaters: A Detailed Review. Sustainability, Volume 14, 12149. https://doi.org/10.3390/su141912149 (Impact Factor: 4.0).

1. Chandan Swaroop Meena, Ashwani Kumar, Siddharth Jain, Ateeq Ur Rehman, Sachin Mishra (2022). Innovation in Green Building Sector for Sustainable Future. Energies, Volume 15, 6631. https://doi.org/10.3390/en15186631 (Impact Factor: 3.2).

1. Varun Pratap Singh, Siddharth Jain, Ashish Karn, Ashwani Kumar, Gaurav Dwivedi, Chandan Swaroop Meena, Raffaello Cozzolino (2022). Mathematical Modeling of Efficiency Evaluation of Double-Pass Parallel Flow Solar Air Heater. Sustainability, Volume 14, 10535.https://doi.org/10.3390/su141710535 (Impact Factor: 4.0).

1. Chandan Swaroop Meena, Ashwani Kumar, Sanghati Roy, Alessandro Cannavale, Aritra Ghosh (2022). Review on Boiling Heat Transfer Enhancement Techniques. Energies, Volume 15, 5759. https://doi.org/ 10.3390/en15155759 (Impact Factor: 3.2).

1. Sandeep Bhoi, Ashwani Kumar, Arbind Prasad, Chandan Swaroop Meena, Rudra Bubai Sarkar, Bidyanand Mahto, Aritra Ghosh (2022). Performance Evaluation of Different Coating Materials in Delamination for Micro- Milling Applications on High-Speed Steel Substrate. Micromachines, Volume 13, 1277. https://doi.org/10.3390/mi13081277 (Impact Factor: 3.4).

1. Varun Pratap Singh, Siddharth Jain, Ashwani Kumar (2022). Establishment of Correlations for the Thermo-Hydraulic Parameters Due to Perforation in a Multi-V Rib Roughened Single Pass Solar Air Heater. Experimental Heat Transfer, DOI: 10.1080/08916152.2022.2064940 (Impact Factor: 3.272).

1. Pravin Patil, Yatika Gori, Ashwani Kumar, M.R. Tyagi (2021). Experimental Analysis of Tribological Properties of Polyisobutylene Thickened Oil in Lubricated Contacts. Tribology International, Vol. 159, 106983, p.n. 1-7, https://doi.org/10.1016/j.triboint.2021.106983 (Impact Factor: 6.2).

1. Pravin P Patil, Ashwani Kumar 2017. “Dynamic Structural and Thermal Characteristics Analysis of Oil Lubricated Multi Speed Transmission Gearbox: Variation of Load, Rotational Speed and Convection Heat Transfer,” Iranian Journal of Science and Technology Transactions of Mechanical Engineering (ISTM), Volume 41, pp. 281-291, https://doi.org/10.1007/s40997-016-0063-z (Impact Factor=1.5).

1. Varun Pratap Singh, Chandan Swaroop Meena, Ashwani Kumar, Nitesh Dutt. Double Pass Solar Air Heater: A Review, International Journal of Energy Resources Applications, 2022, Vol. 1, Issue 2 p.n. 22-43, https://doi.org/10.56896/IJERA.2022.1.2.009.

1. Ramesh Kumar, Ashwani Kumar, Laxmikant, Nitesh Dutt, Varun Pratap Singh. Cutting Parameters Optimization in Turning Operation using Taguchi Method, International Journal of Materials, Manufacturing and Sustainable Technologies 2022, Vol. 1, Issue 2 p.n. 22-30, https://doi.org/10.56896/IJMMST.2022.1.2.009.

1. Amit Kumar, Ashwani Kumar, Varun Pratap Singh, Nitesh Dutt, S.P. Kutar. Study of Material Removal Rate Process Parameters in WEDM, International Journal of Materials, Manufacturing and Sustainable Technologies 2022, Vol. 1, Issue 2 p.n. 31-42, https://doi.org/10.56896/IJMMST.2022.1.2.010.

1. Amit Kumar, Ashwani Kumar, Nitesh Dutt, Varun Pratap Singh, Chandan Swaroop Meena, Arbind Prasad 2022 “Experimental Study of Process Parameter for Surface Roughness in WEDM,” Journal of Mechanical Engineering: PRAKASH, Volume 1, Issue 1, Pages 7-13, https://doi.org/10.56697/JMEP.2022.1109.

1. Atanu Kumar Paul, Arbind Prasad, Ashwani Kumar 2022 “Review on Artificial Neural Network and its Application in the Field of Engineering,” Journal of Mechanical Engineering: PRAKASH, Volume 1, Issue 1, Pages 53-61, https://doi.org/10.56697/JMEP.2022.1107.

1. Ashwani Kumar (2022). “Welcome to International Journal of Materials, Manufacturing and Sustainable Technologies: A Journal Focussing on the advanced Materials, Manufacturing Processes and Sustainable Technologies”, International Journal of Materials, Manufacturing and Sustainable Technologies (IJMMST), Vol 1 Issue 1, page 1-3, https://doi.org/10.56896/IJMMST.2022.1.1.001.

1. Nitesh Dutt, Abhishek Binjola, Ankush Jageshwar Hedau, Ashwani Kumar, Varun Pratap Singh, Chandan Swaroop Meena (2022). “Comparison of CFD Results of Smooth Air Duct with Experimental and Available Equations in Literature”, International Journal of Energy Resources Applications (IJERA), Vol 1 Issue 1, page 40-47, https://doi.org/10.56896/IJERA.2022.1.1.006.

1. 32. Agastya Gaurav Pandey, Ashwani Kumar, Pravin P. Patil and Vijay Kumar (2022). “FEA Based Contact Analysis of Railway Track and Wheel” AIP Conference Proceedings 2481, p.n. 050010-1-050010-8, https://doi.org/10.1063/5.0103726 (Scopus).

1. Pravin Patil, Ashwani Kumar, Yatika Gori, 2021, “FEA design and analysis of flow sensor”, Materials Today: Proceedings, Volume 46, Part 20, Pages 10563-10568, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2021.01.315 (Scopus).

1. Yatika Gori, Rajesh P. Verma, Ashwani Kumar, Pravin Patil, 2021, “FEA Based Fatigue crack Growth Analysis” Materials Today: Proceedings, Volume 46, Part 20, Pages 10575-10581, ISSN 2214-7853 https://doi.org/10.1016/j.matpr.2021.01.319 (Scopus).

1. Amratansh Shukla, Ashwani kumar, 2021, “Design and Thermal Characteristic Analysis of Gearbox System Based on Finite Element Analysis (FEA)” 3rd International Conference on “Advancements in Aeromechanical Materials for Manufacturing” AIP Conf. Proc. 2317, 030002-1–030002-5; https://doi.org/10.1063/5.0036235 Published by AIP Publishing. 978-0-7354-4058-6/$30.00 (Scopus).

1. Arun Kumar Singh Gangwar, P. Sudhakar Rao, Ashwani Kumar, 2021, “Bio-Mechanical Design and Analysis of Femur Bone” Materials Today: Proceedings, Volume 44, Part 1, Pages 2179-2187, ISSN 2214-7853 https://doi.org/10.1016/j.matpr.2020.12.282 (Scopus).

1. Ashwani Kumar, Yatika Gori, Pravin P Patil 2020 “Finite Element Analysis Based Thermo-Mechanical Performance Study of Heavy Vehicle Medium Duty Transmission Gearbox,” Advancements in Manufacturing Materials and Mechanical Engineering, IGI Global, USA. DOI:10.4018/978-1-7998-4939-1, ISBN13:978-179-984-9391.

1. Ashwani Kumar, Sanghpriya Gautam, Yatika Gori, Pravin Patil, 2019, “Dissimilar Materials Welded Specimen Analysis Using FEA” Journal of Critical Reviews, Vol. 6, Issue 5, p.n. 356-362, ISSN-2394-5125.

1. Sachin Rana, Ashwani Kumar, Yatika Gori, Pravin Patil, 2019, “Design and Analysis of Thermal Contact Conductance” Journal of Critical Reviews, Vol. 6, Issue 5, p.n. 363-370, ISSN-2394-5125.

1. Pravin Patil, Ashwani Kumar, Yatika Gori, 2019, “Coriolis Mass Flow Sensor (CMFS): A Review” Journal of Critical Reviews, Vol. 6, Issue 6, p.n. 2628-2632, ISSN-2394-5125.

1. Arun Kumar Singh Gangwar, P.Sudhakar Rao, Ashwani Kumar, Pravin P.Patil, 2019, “Design and Analysis of Femur Bone: BioMechanical Aspects” Journal of Critical Reviews, Vol. 6, Issue 4, p.n. 133-139, ISSN-2394-5125.

1. Sachin Rana, Ashwani Kumar, 2018. “FEA Based Design and Thermal Contact Conductance Analysis of Steel and Al Rough Surfaces” International Journal of Applied Engineering Research (IJAER), Volume 13, Number 16 (2019) pp. 12715-12724, ISSN 0973-4562 (Scopus).

1. Ashwani Kumar, Himanshu Jaiswal, Pravin P. Patil 2017. “Connecting Bolt Constraint Based Design Parametric Optimisation of Vibrating Transmission Gearbox Housing Using RSM” World Journal of Modelling and Simulation, Vol. 13 (3), pp. 228-240. (Scopus).

1. Ashwani Kumar, Himanshu Jaiswal and P.P. Patil. 2017. “Parametric Optimization of Vibrating Heavy Vehicle Medium Duty Transmission Gearbox Housing Using Response Surface Method” International Journal of Vehicle Structures & Systems, Vol. 9 (3), pp. 149-153. doi:10.4273/ijvss.9.3.04 (Scopus).

1. Ashwani Kumar, Neelesh Sharma, Pravin P. Patil 2017. “FEA based Vibration Characteristic Analysis of Conventional and Composite Material Single Piece Drive Shaft” Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering London (WCE- ICME 2017) Vol 2230 pp. 976-980 ISBN: 978-988-14048-3-1 ISSN: 2078-0958 (Print); ISSN: 2078-0966 (Scopus)

1. Pravin P. Patil, Ashwani Kumar, 2017. “Finite Element Analysis of Omega Type Coriolis Mass Flow Sensor (CMFS) for Evaluation of Fundamental Frequency and Mode Shape” International Journal of Engineering and Technology, Vol 9 No 3 S, DOI: 10.21817/ijet/2017/v9i3/170903S017 (Scopus).

1. Pravin P. Patil, Ashwani Kumar, 2017. “Design and FEA Simulation of Omega Type Coriolis Mass Flow Sensor” International Journal of Control Theory and Applications, Vol 9 (40) pn 383-387 (Scopus).

1. Pravin P. Patil, Ashwani Kumar, Faraz Ahmad 2017. “Omega Design and FEA Based Coriolis Mass Flow Sensor (CMFS) Analysis Using Titanium Material” IOP Conf. Series: Materials Science and Engineering, Vol. 310 (2018) 012005 doi:10.1088/1757-899X/310/1/012005 (Scopus).

1. Ashwani Kumar, Pravin P Patil, 2016. “Modal Analysis of Heavy Vehicle Truck Transmission Gearbox Housing Made From Different Materials,” Journal of Engineering Science and Technology, Vol 11 (2), pp. 252-266 (Scopus).

1. Ashwani Kumar, Pravin P Patil, 2016. “FEA Simulation Based Performance Study of Multi-Speed Transmission Gearbox,” International Journal of Manufacturing, Materials, and Mechanical Engineering Vol. 6(1), pp. 57-67, DOI: 10.4018/IJMMME.2016010103 (Impact Factor 0.7).

1. Ashwani Kumar, Rajat Jain, Pravin P Patil, 2016. “Dynamic Analysis of Heavy Vehicle Medium Duty Drive Shaft Using Conventional and Composite Material” IOP: Materials Science and Engineering Vol. 149, pp. 1-11, DOI: 10.1088/1757-899X/149/1/012156 (Scopus).

1. Ashwani Kumar, Pravin P Patil, 2016. “FEA Simulation and RSM Based Parametric Optimization of Vibrating Transmission Gearbox Housing” Perspective in Science, Vol. 8 pp. 388-391 http://dx.doi.org/10.1016/j.pisc.2016.04.085.

1. Ashwani Kumar, Rajat Jain, Himanshu Jaiswal, Pravin P Patil, 2015. “Dynamic Structure and Vibration Characteristics Analysis of Single Piece Drive shaft Using FEM,” International Journal of Applied Engineering Research, Vol. 10 (11), pp. 10263-10269. ISSN: 0973-4562 (Scopus).

1. Ashwani Kumar, Pravin P Patil, 2015. “FEA Based Dynamic Vibration Response Analysis of Loose Mounted Heavy Vehicle Transmission Gearbox Casing,” International Journal of Advanced Materials Manufacturing & Characterization, Vol. 5 (1), pp. 136-141. DOI: http://dx.doi.org/10.11127/ijammc.2015.03.02 (Cross Ref).

1. Ashwani Kumar, Himanshu Jaiswal, Pravin P Patil, 2014. “FEM Simulation Based Computation of Natural Frequencies and Mode Shapes of Loose Transmission Gearbox Casing,” International Review on Modelling and Simulations, Vol. 7 (5), pp. 900-905. DOI: http://dx.doi.org/10.15866/iremos.v7i5.3932 (Scopus).

1. Ashwani Kumar, Himanshu Jaiswal, Pravin P Patil, 2014. “FEA Based Study of Loose Transmission Gearbox Housing” International Journal of Manufacturing, Materials, and Mechanical Engineering, Vol. 4(4), pp. 26-37. DOI:10.4018/ijmmme.2014100102 (Impact Factor 0.7).
2. 57. Ashwani Kumar, Himanshu Jaiswal, Faraz Ahmad, Pravin P Patil, 2014. “Dynamic Vibration Characteristics Analysis of Truck Transmission Gearbox Casing with Fixed Constraint of Vehicle Frame Based on FEA,” Procedia Engineering, Vol. 97, pp. 1107 – 1115. DOI:10.1016/j.proeng.2014.12.389 (Scopus).

1. Ashwani Kumar, Pravin P Patil, 2014. “Dynamic Vibration Analysis of Heavy Vehicle Truck Transmission Gearbox Housing Using FEA” Journal of Engineering Science and Technology Review, Vol. 7 (4), pp. 66-72. ISSN: 1791-2377 (Scopus).

1. Ashwani Kumar, Himanshu Jaiswal, Rajat Jain, Pravin P Patil, 2014. “Free Vibration and Material Mechanical Properties Influence Based Frequency and Mode Shape Analysis of Transmission Gearbox Casing,” Procedia Engineering, Vol. 97, pp. 1097-1106. DOI:10.1016/j.proeng.2014.12.388 (Scopus).

1. Ashwani Kumar, Himanshu Jaiswal, Avichal Pandey, Pravin P Patil, 2014.”Free Vibration Analysis of Truck Transmission Housing Based on FEA,” Procedia Materials Science- Elsevier, Vol. 6, pp. 1588 – 1592. DOI:10.1016/j.mspro.2014.07.141.

1. Ashwani Kumar, Himanshu Jaiswal, Anish Anand, Pravin P Patil, 2014. “Mode Shape Vibration Analysis of Truck Transmission Housing Based on FEA,” International Journal of Advancements in Mechanical and Aeronautical Engineering, Vol. 1(3), pp. 150-154. ISSN: 2372 –4153 (Seek Digital Library).

1. Ashwani Kumar, Shaik Imran Behmad, Pravin P Patil, 2014. “Vibration Characterization and Static Analysis of Cortical Bone Fracture Based on Finite Element Analysis”, Engineering and Automation Problems, No 3-2014, pp. 115-119. UDC- 621.

1. Ashwani Kumar, Shaik Imran Behmad, Pravin P Patil, 2014. “Thermo-Mechanical and Vibration Analysis of the I.C. Engine Piston made of SiC reinforced ZrB2 composite using Finite Element Method (ANSYS)”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) Vol. 7, pp. 19-23. e-ISSN: 2278-1684, p-ISSN: 2320-334X (Cross Ref ).

1. 64. Shaik Imran Behmad, Ashwani Kumar, Pravin P Patil, 2014. “Vibration characterization of different pipe joint using Finite Element Method (ANSYS)”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), Vol. 9, pp 1-5. e-ISSN: 2278-1684, p-ISSN: 2320-334X (Cross Ref ).

1. Ashwani Kumar, Himanshu Jaiswal, Tarun Garg, Pravin P Patil, 2014. “Free Vibration Modes Analysis of Femur Bone Fracture using varying boundary conditions based on FEA”, Procedia Materials Science, Vol. 6, pp. 1593-1599. DOI: 10.1016/j.mspro.2014.07.142.

1. Pravin P Patil, Satish C. Sharma, Himanshu Jaiswal, Ashwani Kumar, 2014. “Modeling Influence of Tube Material on Vibration based EMMFS using ANFIS”, Procedia Materials Science, Vol. 6, pp. 1097-1103. DOI: 10.1016/j.mspro.2014.07.181.

1. Ashwani Kumar, Arpit Dwivedi, Vipul Paliwal, Pravin P Patil, 2014. “Free Vibration Analysis of Al 2024 Wind Turbine Blade Designed for Uttarakhand Region Based on FEA” , Procedia Technology, Vol. 14, pp. 336-347. DOI: 10.1016/j.protcy.2014.08.044.

1. Pravin Patil, Satish Sharma, Aryamn Saini, Ashwani Kumar, 2014. "ANN Modelling of Cu Type Omega Vibration Based Mass Flow Sensor", Procedia Technology, Vol. 14, pp. 260-265. DOI: 10.1016/j.protcy.2014.08.034.

1. Himanshu Jaiswal , Ashwani Kumar, Pravin P Patil, 2014 “Free Vibration Mode Shape Analysis of Space Frame Chassis of a Sports Car based on FEA”, International Journal of Advancements in Mechanical and Aeronautical Engineering, Vol. 1(3), pp. 25-27. ISSN: 2372 –4153 (Cross Ref).

1. Yogesh Kumar Prajapati, Prakash Kumar Gupta, Ashwani Kumar, 2011. “Free Surface Undulation and Air Entrainment in a Rectangular Tank,” International Journal of Applied Engineering Research, Vol 6(4), pp. 409-419. (Scopus).

International Conference Published/ Attended

Ashwani Kumar, Arvind Mishra, (2012). “Semantic Exploration of Finite Difference Approximation and Comparison with close form Solution”. International Conference on Advanced Research in Mechanical Engineering (ICARME), 19/05/2012, PP. 21-24 (Presented).

Ashwani Kumar, Shaik Imran Behmad, Pravin P Patil (2013) “Vibration Characterization of Sic Reinforced ZrB2 Composite Material Connecting Rod Based on Finite Element Method (ANSYS)” Springer, International Conference on Smart Technologies for Mechanical Engineering (STME, 25-26/Oct/2013), Delhi Technological University, Delhi, India. ISBN: 978-93-83083-35-0 pp. 24 (Presented).

Ashwani Kumar, Prateek Chabra (2013) “Design of Gearbox Casing for 300MW Turbine Based on Pro-E” National Conference on Recent Advances in Mechanical Engineering (8-9/July/2013), GBPEC Pauri, India. pp. 141-143 (Presented).

Shaik Imran Behmad, Ashwani Kumar, Pravin P Patil (2013) “Thermal-Mechanical Analysis of Five Cylinders Radial Piston Engine” Springer, International Conference on Smart Technologies for Mechanical Engineering (STME, 25-26/Oct/2013), Delhi Technological University, Delhi, India. ISBN: 978-93-83083-35-0 pp. 99 (Presented).

Ashwani Kumar, Shaik Imran Behmad, Pravin P Patil (2013) “FEA Based Modal Analysis of the Cortical Bone” DST, CSIR, International Conference on Mathematical Techniques In Engineering Applications (ICMTEA, 24-25/Oct/2013), GEU, India. ICMTEA 2013-DEFENA-012 pp. 32 (Presented).

Ashwani Kumar, Arun Kumar, Arpit Dwivedi, Pravin P Patil, (2014). “Thermo-Mechanical Analysis of 321-Austenitic Stainless Steel Exhaust Manifolds of a Diesel Engine based on FEA ”,Proc. of Int. Conf. on Advances in Communication, Networking and Computing, CNC, pp. 251-256, ISBN-978-81-910691-7-8. (ACEEE, Elsevier).

Ashwani Kumar, Himanshu Joshi, Pravin P Patil, (2014). “Vibration Based Failure Analysis of Heavy Vehicle Truck Transmission Gearbox Casing Using FEA,” International Conference on Mechanical Engineering (IMCIET-ICME, 21-23/ Aug/ 2014) VVIT, Banglore, India, pp. 251-259. ISBN: 9789-3510-72713 (Elsevier) (Presented).

Ashwani Kumar, Himanshu Joshi, Aryamn Saini, Pravin P Patil, (2014). “Vibration Diagnosis of Heavy Vehicle Truck Transmission Gearbox Casing Using FEA,” International Conference on Mechanical Engineering (IMCIET-ICME, 21-23/ Aug/ 2014) VVIT, Banglore, India, pp. 169-177. ISBN: 9789-3510-72713 (Elsevier) (Presented).

Ashwani Kumar, Rajat Jain, Himanshu Jaiswal, Pravin P Patil, (2015). “Dynamic Structure and Vibration Characteristics Analysis of Single Piece Drive shaft Using FEM” International conference on Emerging trends in Manufacturing, Engines and Modelling (ICEMEM- 27-28/Feb/2015) SVKM’s NMIMS, Shirpur Campus,India pp. 54 (Presented).

Ashwani Kumar, Pravin P Patil, (2016). “Simulation of Vibrating Transmission Gearbox Housing Using RSM & FEA” International conference on Recent Trends in Engineering & Materials (ICEMS: 17-19/Mar/2016) Jaipur National University, Jaipur, India (Presented).

Ashwani Kumar, Rajat Jain, Pravin P Patil, (2016). “Dynamic Analysis of Heavy Vehicle Medium Duty Drive Shaft using Conventional and Composite Material” International conference on Advance Materials and Manufacturing Applications (IConAMMA: 15-16/July/2016) Amrita Vishwa Vidyapeetham, Bengaluru, India (Presented).

Ashwani Kumar, Neelesh Sharma, Pravin P. Patil 2017. “FEA based Vibration Characteristic Analysis of Conventional and Composite Material Single Piece Drive Shaft” World Congress on Engineering (WCE- ICME 2017- Imperial College of London) (Presented) pp. 976-980 (Scopus) ISBN: 978-988-14048-3-1 ISSN: 2078-0958 (Print); ISSN: 2078-0966 (Online).

Pravin P. Patil, Ashwani Kumar 2017. “Omega Design and FEA Based Coriolis Mass Flow Sensor (CMFS) Analysis Using Titanium Material” International conference on Advance Materials and Manufacturing Applications (IConAMMA 2017) (Amrita Vishwa Vidyapeetham, Bengaluru, India) (Presented).

Ashwani Kumar, Sachin Rana, Pravin P. Patil, 2017. “Optimisation and Modal Analysis of Heavy Vehicle Medium Duty Transmission Gearbox System Using RSM & FEA” IEEE Second International conference on Environmental Management and Green Technologies ICEMGT, pp. 52 (Presented).

Sachin Rana, Ashwani Kumar, 2018. “Thermal Contact Conductance Analysis for Mild Steel and Aluminium Material Surfaces with 40μm Roughness Based on FEA” Proceedings of the IOSRD 42nd International Conference on Advances in Science, Management and Engineering (ICASME 2017) Chennai, Vol. 42 PP. 15-20 (Presented).

Page updated

Google Sites

Report abuse