3D Dragonfly Model
NOTES: Update 2/28/26 with rotating High Gain Antenna
NOTES: Update 2/28/26 with rotating High Gain Antenna
Components of Dragonfly Low-resolution Version on build plate with identifing numbers.
Through a grant from Johns Hopkins Applied Physics Labratory, Fairmont State University has been developing outreach products, activities, and resources. At this time, we are making our Low-resolution Version (LV) of the Dragonfly Lander available for download. All 3D polygonal modeling, renders, print preparation, and testing was completed by Gary Allen Backus (Backus Creative Imaging).
The model was designed to print on one 7"x7" build plate on Fused Deposition Modeling (FDM) 3D printers using PLA commonly found in schools, maker spaces, or in homes. At this time we have project files (.3MF) that will open in slicing software for Prusa and Bamboo printers. We recommend using the .3MF files as we have organized the build plate, set custom supports, and varied infill levels, all of which have been working consistly in our testing.
If you are using Prusa Slicer or Bamboo Studio, open the corresponding .3MF and select "Slice Now". This should generate the appropiate infill, supports, and layout, and you will only have to send the G-Code to your printer. Most print issues we experienced were the result of calibration issues (Prusa Mini Z-Axis ships too high), or old PLA that has absorbed moisture, and build plates that may have oils from your hand on them and need to be cleaned.
PRUSA SLICER .3MF (Prepared for Prusa Mini)
BAMBU STUDIO .3MF (Prepard for Bambu P1S)
ORCA SLICER .3MF (prepared for Elegoo Centauri Carbon)
Community: If you are able to set up a build plate with all the parts and the specific infill and support settings for another printer and/or slicer comination, please share it on this site. Contact: Todd.Ensign@FairmontState.edu
If you wish to work directly with the .STL files, please refer to the Print Guide that will walk you through how to set up your slicer to have the most succesful outcome.
PRINT GUIDE PDF (4.5mb)
ZIP folder with all STL files (95mb)
Individual STL files
Part 1 (Body Back Half, 87mb)
Part 2 (Body Front Half, 80mb)
Part 3 (HGA Base, 1.5mb)
Part 4 (HGA Mount, 15.5mb)
Part 5 HGA Dish, 2.5mb)
Part 6 (DrACO, 5mb)
Part 7 (Front Right Prop, 10mb)
Part 8 (Back Right Prop, 10mb)
Part 9 (Front Left Prop, 10mb)
Part 10 (Back Left Prop, 10mb)
Part 11(EFIELD Probe back, 2.5mb)
Part 12 (EFIELD Probe front, 2.5 mb)
Part 13 (Body Alignment Dowel, 25kb)
Part 14 (Body Alignment Dowel, 25kb)
As you can see in the assembly video, most objects have little geometric indentions that aid in placement. The fit is loose to eliminate tolerance issues with different print settings, so you will need to align orientation and final position of items by eye when gluing. We recommend a gel-type cyanocrylate (CA) glue, such as Super Glue. SAFETY WARNING: Be sure to cover you work-surface with aluminum foil or wax-paper, wear protective gloves and eyewear, and work in a well-ventilated room when glueing the parts. CA glue is not recommended for use by studnts under the age of 14, and never without adult supervision.
Cylindrical dowels (optional) are provided to aid in general alignment of the body pieces. Fit is loose, so align by eye as well.
STLs are provided for every piece of the model. Please see the rendered images for a general reference of part numbers and assembly. Before assembly, you should gently work the spinning props free while holding the arms, and use needle-nose pliers to gently rotate the HGA base cylinder. It is recommended to glue together the body pieces first, legs after, then attach DrACO, HGA, EFIELD antennas, and propellers last.
ASSEMBLY GUIDE PDF (3.5mb)
Credits:
The Johns Hopkins Applied Physics Laboratory (APL) in Laurel, Maryland, leads the Dragonfly mission for NASA in collaboration with several NASA centers, industry partners, academic institutions and international space agencies. This model was developed using only publicly available imagery through the Open-Source Blender software. The Blender and .STL files, along with animations and documentation, were provided to Fairmont State University by designer Gary Allen Backus under the Dragonfly outreach program.