PAPER PUBLICATION IN JOURNAL & CONFERENCES

List of published papers

1.      Reliance Jain , Sandeep Jain, SheetalKumar Dewangan, M.R. Rahul, Sumanta Samal, Eunhyo Song, Younggeon Lee, Yongho Jeon, Krishanu Biswas, Gandham Phanikumar, Byungmin Ahn  “Machine-learning-driven prediction of flow curves and development of processing maps for hot-deformed Ni–Cu–Co–Ti–Ta alloy” Journal of Materials Research and Technology, 36, 2025, 7447-7456.

2.      Reliance Jain, Baidehish Sahoo, Sandeep Jain, Man Mohan, Manoj Choudhary, Hansung Lee, Sheetal Kumar Dewangan, Sumanta Samal, Byungmin Ahn, Yongho Jeon “Functionally Graded Metallic Materials via Additive Manufacturing: Research Progress on Processing, Challenges, and Applications” International Journal of Precision Engineering and Manufacturing-Green Technology, (2025), in press.

3.      Reliance Jain, Sheetal Kumar Dewangan, Sandeep Jain, Man Mohan, Manoj Choudhari, Hansung Lee, Byungmin Ahn, Yongho Jeon “Additive Manufacturing of Eutectic High-Entropy Alloys: A Comprehensive Review of Processing, Properties, and Machine Learning Approach” International Journal of Precision Engineering and Manufacturing, (2025).

4.      Reliance Jain, Sandeep Jain, Naresh Kumar Wargi, Ajay Singh Sikarwar, Shweta J. Khaire, Sheetal Kumar Dewangan, Yongho Jeon, Byungmin Ahn “Reducing experimental dependency: Machine-learning-based prediction of Co effects on the mechanical properties of AlCrFeNiCox high-entropy alloys” Materials Today Communications, (2025), 44, 112055.

5.      Sandeep Jain, Reliance Jain, Vinod Kumar, Sumanta Samal, Jaichan Lee Design strategies and mechanical behaviour of high-strength eutectic high-entropy alloys: A comprehensive review, Journal of Alloys and Compounds, (2025), 1022, 180000.

6.      Reliance Jain, Sandeep Jain, Cheenepalli Nagarjuna, Sumanta Samal, Anuja P Rananavare, Sheetal Kumar Dewangan, Byungmin Ahn, “A Comprehensive Review on Hot Deformation Behavior of High-Entropy Alloys for High Temperature Applications” Metals and Materials International, (2025), 1-33.

7.      Reliance Jain, Sandeep Jain, Sheetal Kumar Dewangan, Lokesh Kumar Boriwal, Sumanta Samal, “Machine learning-driven insights into phase prediction for high entropy alloys,” Journal of Alloys and Metallurgical Systems, 08, (2024), 100110.

8.      Reliance Jain, Sandeep Jain, Sheetal Kumar Dewangan, L Naveen, Divik Patre, Sumanta Samal, Vinod Kumar “Prediction of Hot Deformation Behavior in AlCoCrFeNi2.1 Eutectic High Entropy Alloy by Conventional and Artificial Neural Network Modeling” Transactions of the Indian National Academy of Engineering (2023), 1-16.

9.      Reliance Jain, Sandeep Jain, Roopendra Kumar Pathak, Yana Jain, Lokesh Kumar Boriwal, Sheetal Kumar Dewangan, “Harnessing machine learning for predictive modelling of high entropy alloy phases”, MRS Advances, 9, (2024), 1-8.

10.    Reliance Jain*, Sheetal Kumar Dewangan*, Manikant Paswan, Arvind Patel, Sumanta Samal, Vinod Kumar, Byungmin Ahn, Exploring Zr Influence on Microstructure and Mechanical Property in FeCoNiCrCuZr Eutectic High-Entropy, Metals and Materials International, 2024.

11.    Reliance Jain, Sheetal K. Dewangan, Soumyabrata Bhattacharjee, Sandeep Jain, Manikant Paswan, Sumanta Samal, Byungmin Ahn “Enhancing flow stress predictions in CoCrFeNiV high entropy alloy with conventional and machine learning techniques” Journal of Materials Research and Technology, 30, (2024), 2377-2387.

12.    Reliance Jain, Unhae Lee, Sumanta Samal, Nokeun Park “Machine-Learning-Guided Phase Identification and Hardness Prediction of Al-Co-Cr-Fe-Mn-Nb-Ni-V Containing High Entropy Alloys” Journal of Alloys and Compounds, 956, (2023), 170193.

13.    Reliance Jain, M.R. Rahul, Poulami Chakraborty, Rama Krushna Sabat, Sumanta Samal, Nokeun Park, Gandham Phanikumar, Raghvendra Tewari “Integrated experimental and modeling approach for hot deformation behavior of CoCr-Fe-Ni-V High Entropy Alloy” Journal of Materials Research and Technology, 25, (2023), 840-854.

14.    Reliance Jain, Priyanka Umre, Ramakrushna Sabat, Vinod Kumar, Sumanta Samal, “Constitutive and artificial neural network modeling to predict high-temperature deformation behavior in CoFeMnNiTi eutectic high entropy alloy,” Journal of Materials Engineering and Performance, (2022). 31, 8124– 8135.

15.    Reliance Jain, M.R. Rahul, Poulami Chakraborty, Rama Krushna Sabat, Sumanta Samal, Gandham Phanikumar, Raghvendra Tewari “Design and deformation characteristics of single-phase Co-Cr-Fe-Ni- V high entropy alloy,” Journal of Alloys and Compounds, 888, (2021), 161579.

16.    Reliance Jain, Sheetal K. Dewangan, Priyanka Umre, Vinod Kumar, Sumanta Samal, “Microstructure evolution and an ANN approach for microhardness prediction of suction cast FeCoNiCrMnVNb eutectic high entropy alloys” Transaction of Indian Institute of Metals, (2021) 74, 2671–2679.

17.    Reliance Jain, Avi Jain, Rahul M.R., Ashok Kumar, Mrigendra Dubey, Ramakrushna Sabat, Sumanta Samal, Gandham Phanikumar “Development of ultrahigh strength novel Fe-Co-Ni-Cr-Zr quasi-peritectic high entropy alloy by integrated approach using experiment and simulation,” Materialia (2020), 14, 100896.

18.    Reliance Jain, Sheetal K. Dewangan, Sumanta Samal, Vinod Kumar, “Artificial neural network approach for microhardness prediction of eight component FeCoNiCrMnVAlNb eutectic high entropy alloys” Material science and Engineering A (2020), 797, 140059.

19.    Reliance Jain, Rahul M R, Sumanta Samal, Vinod Kumar, Gandham Phanikumar, “Hot workability of Co- Fe-Mn-Ni-Ti eutectic high entropy alloy” Journal of alloys and Compounds (2019), 822, 153609.

20.    Reliance Jain, Sandeep Jain, Rahul M R, Sumanta Samal, Vinod Kumar, “Phase evolution and mechanical behaviour of Co-Fe-Mn-Ni-Ti eutectic high entropy alloy,” Transaction of Indian Institute of Metals (2018), 71, 2795-2799.

21.    Himanshu Sharma, Reliance Jain, K Raja Rao “Machine Learning-Driven Design of Low-Density Ta-Nb-W- V-Zr-Ti-Mo Refractory HighEntropy Alloys for High-Temperature Applications, (2025).

22.    Raj Shinde, Mahesh N Pradhan, Baidehish Sahoo, Reliance Jain, “Failure analysis of a torsion spring: A microstructural and finite element assessment” Engineering Failure Analysis 175, 2025, 109560.

23.    Cheenepalli Nagarjuna, Sheetal Kumar Dewangan, Hansung Lee, Man Mohan, Reliance Jain, Eunhyo Song, Byungmin Ahn, “Phase stability and structural properties of heat treated FeCoNiAlSi0.5 high-entropy alloy” Materials Today Communications, (2025), 44, 112048.

24.    Cheenepalli Nagarjuna, Hansung Lee, Sheetal Kumar Dewangan, Eunhyo Song, Man Mohan, Reliance Jain, Hwi Geun Yu, Byungmin Ahn “Strengthening of Fe60Co15Ni15Cr10 medium entropy alloy via heat- treatment-induced phase transformation and TiC reinforcement” Journal of Alloys and Compounds, (2025), 1020, 179453.

25.    Sandeep Jain, Reliance Jain, Mahesh Patel, Baidehish Sahoo, Ayan Bhowmik “Harnessing machine learning for predicting mechanical properties of lightweight Mg alloys,” Materials Letters, 378, (2024), 137597.

26.    Anuja P. Rananavare, Reliance Jain, Jaewoong Lee, “Recent Developments in Superhydrophobic Textiles: A Status Review” Journal of Coatings Technology and Research, 2024, 1-32.

27.    Sheetal Kumar Dewangan, Cheenepalli Nagarjuna, Hanseong Lee, Rao K Raja, Mohan Man, Reliance Jain, Byungmin Ahn “Advances in powder metallurgy for high-entropy alloys,” Journal of powder materials, 31, (2024), 480-492.

28.    Sandeep Jain, Reliance Jain, Vinod Kumar, Sumanta Samal, Data-driven design of high bulk modulus high entropy alloys using machine learning, Journal of Alloys and Metallurgical Systems, 08, (2024), 100128.

29.    Sandeep Jain, Reliance Jain, K Raja Rao, Ayan Bhowmik, Leveraging machine learning to minimize experimental trials and predict hot deformation behaviour in dual phase high entropy alloys, Materials Today Communications, 41, (2024),110813.

30.    Sandeep Jain, Reliance Jain, Sheetal Kumar Dewangan, Ayan Bhowmik “A Machine learning perspective on hardness prediction in multicomponent Al-Mg based lightweight alloys,” Materials Letters, 365, (2024),136473

31.    Sandeep Jain, Reliance Jain, Sumanta Samal, Vinod Kumar “Effect of Ta on the Evolution of Phases and Mechanical Properties of Novel Seven Components Fe–Co–Ni–Cr–V–Al–Ta Eutectic High Entropy Alloys: Experimental Study and Numerical Simulation” Transactions of the Indian National Academy of Engineering (2024), 1-15.

32.    Sheetal Kumar Dewangan, Cheenepalli Nagarjuna, Reliance Jain, Rameshwar L. Kumawat, Vinod Kumar, Ashutosh Sharma, Byungmin Ahn “Review on applications of artificial neural networks to develop high entropy alloys: A state-of-the-art technique” Materials Today Communications, 37, (2023), 107298.

33.    Piyush Kumar, Reliance Jain, M. R. Rahul, Abhijit Ghosh, Sumanta Samal & Gandham Phanikumar “High Temperature Deformation Behavior and Processing Maps of FeCoNiCrAlTi Dual Phase High Entropy Alloy,” Metals and Materials International, (2023), 29, 2500-2514.

34.    Mokali Veeresham, Reliance Jain, Unhae Lee, Nokeun Park, “Machine Learning Approach for Predicting Yield Strength of Nitrogen-Doped CoCrFeMnNi High Entropy Alloys at Selective Thermomechanical Processing Conditions, Journal of Materials Research and Technology, 24 (2023), 2621-2628.

35.    Sandeep Jain, Reliance Jain, M. R. Rahul, Sumanta Samal, Vinod Kumar, “Phase Equilibria and Mechanical Properties in Multicomponent Al–Ni–X (X = Fe, Cr) Alloys,” Transaction of Indian Institute of Metals, (2018), 71, 2819–2825.

36.    Rahul M R, Reliance Jain, Sumanta Samal, Gandham Phanikumar, “Microstructure evolution and mechanical properties of Co-Fe-Ni-Ti-V eutectic high entropy alloy,” in the “7th International Conference on Solidification and Gravity (SG’18)”, 02/09/2018- 06/09/2018 at Miskolc - Lillafüred, Hungary.

37.    Shiva Soni, S. L. Ahirwar, Reliance Jain, Ashish Kumar Shrivastava. "Simulation and Static Analysis on Improved Design of Excavator Boom", International Journal of Emerging Technology and Advanced Engineering, (2014), 4, 49-55.

38.    Pradeep Kumar Yadav, Rahul Bobade, Reliance Jain, Biogas Upgrading Technologies: A Review, International Journal of Recent Technology Science & Management, 2016.

Paper presented at the conference:

1. Reliance Jain, Mokali V, Nokeun PARK, Prediction of Microstructure and Mechanical Properties of Fe- Co-Ni-Cr-V-Nb Containing Eutectic High Entropy Alloys using Machine Learning Approach, 2022 Fall Conference of the Korean Institute of Metals and Materials (KIM 2022), October 26- October 28, 2022, Jeju International Convention Center, Jeju, South Korea.

2. Reliance Jain, Mokali V, Nokeun PARK, Hot Deformation Behaviors of Co-Cr-Fe-Ni-V High Entropy Alloy: Experimental, Modeling and Simulation, General meeting of the Korean Society of Metals and Materials, 2022, Kumoh University of Technology Techno Building Room 201, Gumi, South Korea.

3. Reliance Jain, Rahul M.R., and Sumanta Samal, Processing maps of Co-Fe-Mn-Ni-Ti eutectic high entropy alloys, 26th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM-2019) July 08-12, 2019, Hotel Raintree, Anna Salai, Chennai, India.

4. Reliance Jain, Rahul M R, Sandeep Jain, Sumanta Samal, Vinod Kumar, Phase evolution and mechanical behavior of Co-Fe-Mn-Ni-Ti eutectic high entropy alloy, in the “7th International Conference on Solidification Science and Processing (ICSSP-2018)”, 19/11/2018 - 22/11/2018 at Trivandrum, Kerala, India.

5. Reliance Jain, Sheetal Kumar Dewangan, Vinod Kumar, Sumanta Samal, Artificial Neural Network Approach to Predict hardness of FeCoNiCrMnVNb Eutectic High Entropy Alloys, March 7-8, 2020, 3rd International Workshop on High Entropy Materials (IWHEM 2020).

6. Rahul M R, Reliance Jain, Sumanta Samal, Gandham Phanikumar, Microstructure evolution and mechanical properties of Co-Fe-Ni-Ti-V eutectic high entropy alloy, in the “7th International Conference on Solidification and Gravity (SG’18)”, 02/09/2018- 06/09/2018 at Miskolc - Lillafüred, Hungary.

7. Sandeep Jain, Reliance Jain, Rahul M R, Sumanta Samal, Vinod Kumar, Phase equilibria and mechanical properties of Al-Ni-(Cr, Fe) alloys, in the “7th International Conference on Solidification Science and Processing (ICSSP-2018)”, 19/11/2018 -22/11/2018 at Trivandrum, Kerala, India.