Embedded Files
Selected Journal Publications
Selected Journal Publications
Prince pal Singh, Jatinder Madan and Harwinder Singh, 2020, Composite performance metric for product flow configuration selection of reconfigurable manufacturing system (RMS), International Journal of Production Research, Available online. https://doi.org/10.1080/00207543.2020.1756511. (IF 3.199)
Prince pal Singh, Harwinder Singh and Jatinder Madan, 2018, A review of performance measures for system configuration in reconfigurable manufacturing system, Industrial Engineering Journal, vol 9 (5), 20-22. https://doi.org/10.26488/IEJ.11.5.1063
Ranjit Singh, Jatinder Madan, 2018, A computer-aided system for gating-system design for die casting dies, International Journal of Advanced Manufacturing Technology, vol 101, 1793–1806 . https://doi.org/10.1007/s00170-018-2980-z .(IF 2.209)
S. Kumar, B. S. Pabla, J. Madan, 2017, Optimization of Machining Parameters in Turning EN-45 Steel Using Plain Carbide Tools, Int. J. of Scientific Research in Science, Engineering and Technology. Open Access
R. Kumar, S. C. Vettivel, J. Madan, B. S. Pabla, S. Kumar, 2017, Characterization, Physical and Mechanical Behavior of Sintered Atomized Iron–Zinc Stearate Composite, Trans Indian Institute of Metals, 2018, vol 71 (1), 41 – 45. https://doi.org/10.1007/s12666-017-1154-2. (IF 0.533)
V. Kumar, and J. Madan, 2016, Computer-aided system for multi-cavity die-casting die-design, International Journal of Mechatronics and Manufacturing Systems, vol 9, no 1, p 36-55. https://doi.org/10.1504/IJMMS.2016.075399 .
V. Kumar, and J. Madan, 2015, A system for computer-aided gating design for multi-cavity die-casting dies, IMech Journal of Engg. Mfg. -Part B, https://doi.org/10.1177/0954405415614727 . (IF 1.366)
J. Madan, M. Mani, J. Y. H. Lee, Kevin W. Lyons, 2014, Energy performance evaluation and improvement of unit-manufacturing processes: injection molding case study, J. of Cleaner Production, vol 105, 157-170. https://doi.org/10.1016/j.jclepro.2014.09.060. (IF 5.651)
Mahesh Mani, J. Madan, Jae Hyun Lee, Kevin W. Lyons, S.K.Gupta, 2014, Sustainability characterization for manufacturing processes, International Journal of Production Research, vol 52, no 20, p 5895-5912. https://doi.org/10.1080/00207543.2014.886788. (IF 2.623)
R. Singh and J. Madan, 2013, Systematic approach for parting line determination for die-cast parts, Robotics and Computer Integrated Manufacturing, vol 29, no 5, p 346-366. https://doi.org/10.1016/j.rcim.2013.02.002 . (IF 3.464)
R. Singh, J. Madan and R. Kumar, 2013, Automated identification of complex undercut features for side-core design for die-casting parts, IMech Journal of Engg. Mfg. -Part B, vol 228, no 9, p 1138-1152. https://doi.org/10.1177/0954405413514744 . (IF 1.366)
P. Singh and J. Madan, 2013, Computer-aided sustainability assessor for die-casting, International Journal of Adv. Manufacturing Technology, vol 67, no 9-12, p 2083-2107. https://doi.org/10.1007/s00170-013-5232-2 . (IF 2.209)
C. D. Singh, J. Madan and A. Singh, 2013, Computer aided design of gating system for a die-casting die, International Journal of Computer Applications in Technology, vol 46, no 2, p 113-127. DOI : 10.1504/IJCAT.2013.052293 .
V. Kumar, J. Madan and P. Gupta, 2012, A system for design of multi-cavity die-casting dies from part product model, International Journal of Advanced Manufacturing Technology, vol 67, no 9-12, p 2083-2107. https://doi.org/10.1007/s00170-012-4633-y (IF 2.209)
V. Kumar, J. Madan and P. Gupta, 2012, System for computer aided cavity layout design for die-casting dies, International Journal of Production Research, vol 50, no 18, p 5181-5194. https://doi.org/10.1080/00207543.2012.659352. (IF 2.623)
V. Kumar, J. Madan and P. Gupta, 2010, Cavity layout design methodology for die-casting dies, Int. J. of Engineering Studies, vol 2, no 3, p 263-270. Available online
J. Madan, P. V. M. Rao and T. K. Kundra, 2009, Optimal parting direction selection for die-casting, International Journal of Manufacturing Technology and Management, vol 18, no 2, p 167-182 . DOI: 10.1504/IJMTM.2009.026192 .(IF 0.661)
J. Madan, P. V. M. Rao and T. K. Kundra, 2007, Die-casting feature recognition for automated parting direction and parting line determination, Transactions of ASME Journal of Computing and Information Science in Engineering, vol 7, p 236-248. https://doi.org/10.1115/1.2768369. (IF 1.588)
J. Madan, P. V. M. Rao and T. K. Kundra, 2007, System for early cost estimation of die-cast part, International Journal of Production Research, vol 45, no 20, p 4823-4847. https://doi.org/10.1080/00207540600789016. (IF 2.623)
J. Madan, P. V. M. Rao and T. K. Kundra, 2007, Computer aided manufacturability analysis for die-cast parts, Computer Aided Design & Applications, vol 4, no 1-4, p 147-158. https://doi.org/10.1080/16864360.2007.10738535
Selected conference publications
Selected conference publications
Prince pal Singh, Jatinder Madan and Harwinder Singh, 2020, A systematic approach for responsiveness assessment for product and material flow in reconfigurable manufacturing system (RMS), Materials Today: Proceedings , Available online. https://doi.org/10.1016/j.matpr.2020.04.890
Prince pal Singh, Jatinder Madan and Harwinder Singh, 2019, Performance metrics for product flow configuration in a reconfigurable manufacturing system (RMS). Proceedings of the ASME 14th International Manufacturing Science and Engineering Conference (MSEC -2019)”. June 10-14, 2019, Erie, Pennsylvania, USA. https://doi.org/10.1115/MSEC2019-2951
R. Singh, J. Madan, 2018, An integrated framework for computer aided die-design for die-casting dies, Proceedings of the ASME 2018 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, (IDETC/CIE 2018) August 26-29, 2018, Quebec City, Quebec, Canada. (Paper id: DETC2018-85199)
Prince pal Singh, Harwinder Singh and Jatinder Madan, 2017, A Review of Performance Measures for System Configuration in Reconfigurable Manufacturing System, Int. conf. on research and innovations in mechanical engineering ( ICRIME 2017), 22-24 Dec 2017 held at GNDEC, Ludhiana. (Extended version published in Industrial Engineering Journal of IIIE)
Sunil Kumar, Jatinder Madan, 2018, An automated system for design for manufacturability analysis for die-casting, ASME International Manufacturing Science and Engineering Conference (MSEC2018), Texas A&M University, College Station, TX, June 18 – June 22. https://doi.org/10.1115/MSEC2018-6510
R. Singh, R. Kumar, J. Madan, 2016, A systematic approach for computer-aided gating-system design for die casting dies, ASME International Manufacturing Science and Engineering Conference (MSEC 2016), Blacksburg, Virginia, USA, June 27- July 1. https://doi.org/10.1115/MSEC2016-8768
K. Singh, J. Madan, 2015, Sustainability performance assessment of alternate machining technologies, ASME International Manufacturing Science and Engineering Conference (MSEC 2015), University of North Carolina, Charlotte, NC, USA, June 8-12. https://doi.org/10.1115/MSEC2015-9402
V. Kumar and J. Madan, 2014, Computer-aided system for multi-cavity die-casting die-design, 5th Int. and 26th All India Mfg. Tech. Design and Research Conference (AIMTDR 2014), IIT Guwahati, Assam, India, Dec 12-14. (Extended version published in IJMMS). Available online
R. Singh and J. Madan, 2014, Computer aided runner and gating system design from die-casting part model, 5th Int. and 26th All India Mfg. Tech. Design and Research Conference (AIMTDR 2014), IIT Guwahati, Assam, India, Dec 12-14.
J. Madan, M. Mani and Kevin W. Lyons, 2013, Characterizing energy consumption for the injection molding process, ASME Manufacturing Science and Engineering Conference (MSEC 2013), Madison, Wisconsin, USA, June 8-12.https://doi.org/10.1115/MSEC2013-1222
K. Singh, P.P. Singh, J. Madan and R. Kumar, 2013, A computer-aided system for life cycle inventory of an aluminium extrusion plant, Proceedings of Int. Conf. on Production and Industrial Engineering (CPIE-2013), Jalandhar,India, March 29-31, pp 302-307. Get access
S. Kansal, J. Madan and A. Singh, 2013, A systematic approach for CAD model generation from point cloud data, IEEE International Advance Computing Conference, Ghaziabad, India, Feb 22-23.
M. Mani, J. Madan, J. H. Lee, K. W. Lyons and S. K. Gupta, 2012, Characterizing sustainability for manufacturing performance assessment, ASME IDETC/CIE, Chicago, USA, Aug 12-15.https://doi.org/10.1115/DETC2012-70455
P. Singh, J. Madan, M. Mani and A. Singh, 2012, A computer aided system for sustainability analysis for die-casting process, ASME Manufacturing Science and Engineering Conference (MSEC 2012), University of Notre Dame, Indiana, USA, June 4-8.https://doi.org/10.1115/MSEC2012-7303
R. Singh, J. Madan and R. Kumar, 2012, A study on automated side-core design for die-casting dies, National Conf. on Adv. in Mech. Engg., Energy and Environment (AMEEE), SLIET Longowal, India,Jan 6-7.
R. Singh, J. Madan and R. Kumar, 2012, Automated identification of complex undercut features for side-core design for die-casting parts, 4th International and 25th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2012), Jadavpur University, Kolkata, India, Dec 14-16. Available online
M. Sharma, S. Kansal, J. Madan, A. Singh, 2012, Surface reconstruction methods for 3D CAD model, National Conf. on Advancements in Mech. Engineering and Energy Environment (AMEEE), SLIET Longowal, Jan 6-7.
V. Kumar and J. Madan, 2011, System for computer aided cavity layout design for die-casting dies, 39th North American Manufacturing Research Conference (NAMRC 2011), Oregon State University, Oregon, USA, June 13-17.
V. Kumar, J. Madan and P. K. Gupta, 2010, Development of a system for automatic cavity layout design of die casting dies, International CAD Conference and Exhibition (CAD & A), Dubai, UAE, June 21-25.
V. Kumar, J. Madan and P. Gupta, 2010, Cavity layout design methodology for die- casting dies, 2nd National Conference on Precision Manufacturing (NCPM-2010), SLIET, Longowal, Punjab, India, March 26-27.
K. Goyal and J. Madan, 2010, Current issues in CAD model data exchange: A review, 2nd National Conference on Precision Manufacturing (NCPM-2010), SLIET, Longowal, Punjab, India, March 26-27.
S. Kumar and J. Madan, 2010, Meshless methods for process simulation of die castings: A review, 2nd National Conference on Precision Manufacturing (NCPM 2010), SLIET, Longowal, Punjab, India, March 26-27.
T. P. Singh, J. Singh, J. Madan, G. Kaur and N. Goyal, 2010, Experimental investigation of the influence of cutting tool, rake angle and nose radius on surface roughness, National Conf. on Adv. and Futuristic Trends in Mech. Engg. (AFTMME’10), YCoE, Bathinda (Pb.), Feb 19-20.
T. P. Singh, J. Singh and J. Madan, 2009, Experimental investigation of the effect of cutting tool parameters on surface roughness, NCWT-2009,SLIET, Longowal, pp173-178, Feb 13-14, 2009
J. Singh, J. Madan and S. K. Sharma, 2008, Spatial modeling of biomass management for power generation in Punjab, pp 1009-14, Renewable Energy Asia 2008 – An International Conference & 4th SEE Forum Meeting, IIT Delhi, New Delhi, Dec 11 – 13.
J. Madan, A. Singh and S. Kumar, 2008, Recognition of intersecting features and identification of separable regions for design-manufacturing integration, International Conference on Digital Factories (ICDF 2008), Coimbatore Institute of Technology, Coimbatore, Aug 11-13. Get access
S. Patyal, I.Goyal and J. Madan, 2008, Knowledge based system for computer aided design and analysis of gear train, Proceedings of the National Conference on Mechanism Science and Technology: from Theory to Application (NCMSTA 2008), National Institute of Technology, Hamirpur, India, Nov 13-14. Get access
J. Madan, P. V. M Rao and T. K. Kundra, 2007, Automated design for manufacturability analysis for die-cast parts, International CAD Conference and Exhibition, Honolulu, Hawaii, USA, June 25-29.
J. Madan, 2004, Recent advances in design for manufacturability systems, Emerging Trends in Manufacturing Systems (ETMS 2004), SLIET, Longowal, Punjab, Jan. 17-18.
J. Madan, P. V. M Rao and T. K. Kundra, 2006, Automated parting direction and parting line determination for die-cast parts, Design for Product Life Cycle (DPLC 2006), BITS Pilani, India, Feb 17-18. Available online
J. Madan and B.S.Pabla, 2003, NC part program generation with optimized machining parameters for cylindrical components using feature based modeling systems, International Conference on Automation, Robotics and Factories of Future (INCARF 2003), IIT Delhi, New Delhi, Sept 11-13. Get access
B.S Pabla and J. Madan, 2000, NC part program generation with feature based modeling system for turned components, at XVI National Convention of Mechanical Engineers, University of Roorkee, India, Sept 29-30.
Technical Reports
Technical Reports
M. Mani, J. Madan, J. H. Lee, K. W. Lyons and S. K. Gupta, 2013, Review on sustainability characterization for manufacturing processes , NIST Internal Publication (NISTIR-7913), Gaithersburg, MD, USA. Available online
Page updated
Google Sites
Report abuse