Download Xiao BETTER

I met this problem mate.

You just go to this link: -Studio/ArduinoCore-samd/tree/master/bootloaders/XIAOM0

download the XIAO bin file then, Use SWD to burn the firmware into XIAO, it will be work again.

How to unbrick a dead xiao using raspberry pi [ GUIDE ][openocd]

@mentions#XIAO #esp32S3 #xiaoEsp32S3 So until the main system is refreshed install or update the XIAO esp32C3 and download and unzip then find the install folder replace the boards.txt file and put the main folder into the variants folder. Not hard but different.

Download Xiao

Download File 🔥 https://tinurll.com/2y3Bcd 🔥

@mentions

So I installed #xiaoEsp32s3 on both #arduinoIDE 1.8.19 and 2.04 and both seem to compile code, blink works, but when I add the serial monitor. It seems to give debug info and nothing useful. A little disappointed, but that is #Robotics

@seeedstudio DM me if you want.

mcu-stable-edu-launch/xiao-esp32s3 at main hpssjellis/mcu-stable-edu-launchWhat examples should a new microcontroller board present when it is launched - mcu-stable-edu-launch/xiao-esp32s3 at main hpssjellis/mcu-stable-edu-launch -stable-edu-launch/tree/main/xiao-esp32s3 2351a5e196