Download Squareline Studio ^NEW^

Lastly, you can put the generated squareline files in the main folder (or another one). After you included the c files in the CMakeLists.txt file and the ui.h in the main c file, you can call the ui that you designed with squareline!

this is a how to setup for squareline studio

first download the drivers for the board - you need to be patient they exceed the download limits daily so might take a couple days before you can download it

Download Squareline Studio

Download File 🔥 https://byltly.com/2y5G8q 🔥

now download a copy of Squareline studio. unzip it then copy the board driver to boards/Arduino/ ( if the folder Arduino is not present create it. then copy it into that folder )

if using a linux desktop and having issues starting it. the easiest way to get it to work is download version 1.0.5 start that first. leave it open. then start the newer one 1.2.3 (or you can hammer away at program it will start too but sometime it be quite a few clicks to get it running).

Hello

first of all thank you for your amazing work with driver for Square line studio, after few desparate nights in front of monitors I wanted to abandon my project and then tried your work and it uploaded sketch sucessfully to the display. huge succes.

I have one additional question, is it possible to rotate the display ? For my project I would need vertical orientation of display, but no matter what I tried to configure in squareline studio or in exported files, not getting rotated image or it is distorted.

you probably can not rotate my project but you can create a new project that is rotated. there was option when first setting up your new project where you change orientation. you could also load sample projects that came with squareline that were orientated in different orientations and they would load properly . ( sorry I have not used squareline lately so it going by memory) if you still having issue you can swap * width * and * height* parameters in the ino and touch.h making a 800x480 driver plus edit arduino_tft_espi.slb to reflect the changes that should also work

Hello, i have stm32h745i for my project but unfortunately the SDRAM itself is not enough to handle my gui program.I use lvgl and squareline studio to make gui. I have thought that maybe if i can reduce the color depth from 32 to 16 will reduce my memory usage. Is it possible?

Hello @BAl K.1 ,

Can I ask you if you have tried using TouchGFX Designer? You mention lvgl and squareline studio, do you know that TouchGFX Designer software also helps you to create your GUI and is natively compatible with all STM32 chips? We provide for the STM32H745i-disco board an entire setup fully optimized for graphics that you can use. We can guide you if you need to change the color depth or the framebuffer strategy but I don't know how far it's compatible with the 2 other tools you mentioned. But I can say that with TouchGFX, we can make it work

I have tried TouchGFX and i need some tools from squareline studio that not exist in touchgfx, so i choose touchgfx. basically it is mostly the same. How can i change 32 depth to 16 in touchgfx? what should i change? 17dc91bb1f