[WORK] Download Offline Maps On Google Maps

After you download an area, use the Google Maps app just like you normally would. If your internet connection is slow or absent, your offline maps will guide you to your destination as long as the entire route is within the offline map.

Offline maps that you downloaded on your phone or tablet must be updated before they expire. When your offline maps expire in 15 days or less, Google Maps tries to update the area automatically when you're connected to Wi-Fi.

Download Offline Maps On Google Maps

Download Zip 🔥 https://geags.com/2y2Ni2 🔥

With offline maps in iOS 17 and later, you can use Maps for information and navigation even when you don't have a Wi-Fi or cellular connection. Offline maps include details like hours and ratings on places, turn-by-turn directions for driving, walking, cycling, or riding transit, and estimated arrival times.

Offline maps do not sync across your devices. Offline maps are only available in select areas. An offline map for a specific region is not intended for use in all regions. Features vary by country and region.

My maps are prepared for offline use and have been working offline. I go to download a new area, or sometimes add a new layer (but not always). And the download fails. Sync and offline areas are enabled, and everything appears as it should, but the download fails.

If anyone else is experiencing this bug or knows how to pinpoint offline map download errors, please help. I've had to remake my maps so many times it is very frustrating and is getting to the point where I can't rely on Field Maps for our mapping needs.

Thanks for the follow-up questions. This specific instance, I am downloading offline areas in the Field Maps app. My test downloads are much smaller than I would usually download so I do not believe it is a size limitation.

Either way I feel like I shouldn't have to recreate the layers like this every time the map breaks. Especially because my forms have lots of calculations that I have to configure in Field Maps Designer and it is very tedious to keep having to scrap and recreate my maps.

I've had similar issues in the past and I removed each replica from each device, went to the item details and un-checked editor tracking, sync and editing for all the layers used in the offline map. Then, go to the REST interface and unregister all replicas (you will lose any edits that are not synced) for all services in the map.

Then, turn editing, sync, tracking, etc. back on and re-create the replicas with Field Maps Designer or Map Viewer. I never had much success with the Add Offline Area in the Field Map apps, so I generate offline areas beforehand and download them.

The offline area gets huge pretty fast if the area is very large, and will fail. So, for my Field Map maps that I want to take offline, my basemap is a single vector basemap with just an outline of my study area. The actual 'basemap' that I use is downloaded onto the device locally as a tpk(x).

I would try to disable change tracking, sync and enable them back. You do not need to enable change tracking if all what you need to create offline and sync. You will see change tracking in the UX under (Keep track of changes to the data (add, update, delete features). Unfortunately you will have to delete all existing replicas on this service before disable sync. It is possible sync was enabled and there has been some schema changes after.

After that I thought, is something wrong in layer1 (related table). So I exported the feature layer as FGDB and reuploaded it to AGOL and created a TEST Map. Now this worked perfectly fine when I tried to download the offline area.

The next obvious step was to try and break the TEST layer. So created a new field with name of more than 31 characters. Then I tried downloading an offline area, the result was a fail with the same error.

Removed the troublesome field and I am able to download offline areas on my phone/iPAD.

A few other tests have confirmed this. It is the field length that causes the issue.

There is no limit (max 31 characters) in AGOL when you create a new field but when you try and download an offline area/replica then possibly that limit kicks in and the process fails.

Ill also add here that this problem will occur when your hosted feature service schema contains attribute field names that are reserved Sqlite words. For example, a hosted feature service can have a field named "group". If you try and download this feature service in an offline area you will get the above error as "group" is a reserved sqlite word. See _keywords.html for all words that you should never use in AGOL as field names.

Knowing how to download offline Google Maps is an important skill to know, especially if you're heading off into the great unknown. you don't want to get lost, simply because there's no cell signal, after all.

Fortunately accessing Google Maps offline is easier than ever, and in most cases won't require you to actually do anything. Considering how valuable a navigational tool it is, those offline maps can come in handy. Especially if you plan on doing some traveling over the holidays.

It's understandable if you'd rather download your maps manually, rather than rely on Google Maps functioning correctly all the time. Fortunately this is incredibly easy to accomplish, and can be done in two different ways. The most effective way is as follows:

I am just wondering if anyone else has been having this issue. I can set up an offline area in the Field Maps online web application, then when I try to download that offline area on Field Maps Mobile (tested on two android devices) I receive the "Offline Areas Failed to Download" Error and the log tells me that feature tiling is disabled. Now this is frustrating. However, when I create on offline area in the Field Maps Mobile App, the map is created an downloads just fine.

I ran into this issue and was able to "fix" it by turning sync off, then back on for ALL layers included in the web map, make sure any tile packages included in the map or basemaps have Offline Mode enabled:

It would be good if anyone from ESRI could confirm if there was some sort of limit to the number of features with attachments or best practise with attachments. In my case I want as a read only reference layer a point layer which may have several hundred points each with a single photo attached. Is that asking too much of field maps?

So I decided to downgrade the image size of my attachments because when you click on a dot to see its attachment (in field maps) it does not appear to be a zoomable image. So I decided to resize the images to 800x600 pixels which significantly reduces the file size. This allowed the download to complete without error and I get to keep the whole dataset, no need to break it up into several "Map Areas".

I currently have a support ticket open with ESRI about this and she casually mentioned that attachments have been an issue for folks lately, but it does not appear to be a main focus of our troubleshooting so far (I do have layers with attachments). I am currently tasked with republishing all of the map layers and recreating the maps- glad (?) to know others are having this issue too and it's not just me!

Hi - yes there are check marks for all the layers. Maybe this helps: I just edited my post to add that when I create the offline area through the app, I am able to edit. But I'd rather create it in Field Maps Designer.

I am having the same troubles on my Field Map that I created for wetland delineation. Allow editing and Sync is on for all layers. The online version of the webmap works just fine, but the offline map area version doesn't allow editing. If I create Offline Areas in my iPhone, those are editable. Cannot seem to make it work with the Designer App.

I am having the same troubles on my FieldMap that I created for a project. I've Allowed editing and sync is enabled is on for all layers. The online version of the webmap works just fine (in FM), but the offline map area (that I created in AGO) version doesn't allow editing.

It seems to be some sort of bug as I am able to get it to work if I create the offline area within the mobile field maps app. I got around the issue in the Field Maps Designer on my laptop by playing with the extent of the offline area (e.g., going in smaller and only covering the points of interest not the entire mountain region). It may be the fact that I played around with the "Level of detail" slider too.

Having the exact same issue here. I believe I have all the sharing/editing permissions set up correctly for the map and features. In Field Maps, I'm able to edit features with the online map, but not with the offline map area that I made with Field Maps Designer. When I create an offline area within Field Maps on the device itself, the editing feature works just fine.

This group is for use with ArcGIS Field Maps in which members need to edit the feature layers. We also need the ability to manage offline map areas. I am able to do this in other established groups with folks editing data and web maps shared to the group where I manage offline map areas.

How can I have a web map shared to a group where group members can update the items in the group and I can also manage the offline map areas for use in Field Maps? I have been doing this for other groups over the last year without this 'Shared Updates' label and offline map areas? Today is the first time I've received this new 'Feature disabled' notice. So I'm supposed to unshare and reshare each time I want to create a new offline map? What is going on? ff782bc1db