The HP Deskjet 1010 Printer Driver was first released in November 2015 and its has been upgraded to be used in conjunction with Windows 10 operating systems since this time. It is primarily designed to provide an effective means of communication between a computer and the printer. There are times when a user may need to upgrade to this driver in order to carry out common printing tasks. The total size of this file is 90.3 megabytes.
Recently I've bought an inkjet printer HP Deskjet 1010. Previously I had a printer. I usually print with A4 papers. But I can't print A4 documents with the printer. It supports only letter size. I go to printer settings and then click Preferences and then Advanced. Then I choose A4 as paper size. But still it can't print A4 papers. The lower portion of the paper isn't printed.
Download Driver Printer Hp Deskjet 1010 Windows 8 64 Bit
Download Zip 🔥 https://bytlly.com/2y2QIZ 🔥
I had to pass someone a copy of an Access database that has some Labels reports designed to print quite a few sheets of Avery labels (or compatible), and the HP 1010 messed up the printing not only on my printer, but also on that person's printer which had previously been OK with the same reports (I had recently modified the reports and re-saved them).
Because of the problem with forced wide bottom margin on HP Deskjet 1010 , we were both wasting a lot of these expensive labels sheets for our non-profit -- the printer was jumping to the next page too early. My colleague has a different/higher quality HP printer and had never had the problem before receiving my file. It seems that these Access label reports were inheriting the wide margin from the default printer driver specs when I saved the file, even when I wasn't printing. I found this to be odd!
But there's a fix! I found that if I made my HP Deskjet 1010 printer NOT be default on my PC (I switched to something else I have available), I was able to adjust the bottom margin on the reports to 0.5 inches and re-save the Access database. It still goes back to jumping to the next page too early when I print on my HP 1010, but at least I was able to pass a good file to the other PCs in our organization.
Hi I'm attempting to use the HP1010 deskjet on my mac running Big Sur (11.6.4) and I've tried running the HP Easy Start app and it is not locating the printer/driver. Is there a direct link to a driver that will work for this printer on this OS?
Using HP Smart Start and HP Smart but can't get Mac OS computer to communicate with HP Deskjet 1010 via a USB with UNI USB C Hub. Updated iMac software. When run HP diagnostics, it just spins indefinitely. When the print que opens, it shows the printer name at top but the box is blank and does not show any upcoming print jobs.
Thank you for the advice. I've followed the directions as best I can, yet still no able to print. It seems even if I download the printer software, the computer can't find the printer. Is it the USB C hub that's causing issue or is a HP Deskjet 1010 just not compatible?
Hi this was really helpful, but now I have another issue. The link you provided walked through installing a new driver that should be compatible with my printer (I checked and my printer was on the list) however when I try to go into system preferences and install my printer, Under Use: it says Choose a Driver and when I hit that it says "Select Software" or "Other. With either option, I have no idea where to find the driver I installed. Any suggestions?
2) Go to Control panel - Devices and printers - Right-click on Deskjet 1010 and select "Printing Preferences". Click on "Advanced" tab and make sure the "Advanced printing features" are enabled. Now try to print. If the issue persists, go to the next step.
I would consider downloading a driver from the official support page. In your case, it is the following. -en/drivers/selfservice/hp-deskjet-1010-printer-series/5157543/model/515754... Opens a new window
I had been using (same model HP Deskjet 1010) until it developed the problem described above. Thinking it was a printer problem, I replaced the existing printer with a brand new HP Deskjet 1010 (same model) I had purchased some time ago as a back-up replacement printer. I discovered even with the new printer, I had the same problem as the previous printer.
This issue strangely happens on my iPad. My iPhone scans and prints with zero problems but on my iPad it forces me to create a new account or sign in whatever i want to do something with the printer. It is a deskjet 3835 ff782bc1db
download komik dragon ball pdf
can i download zoom on my smart tv