Driver HP Hs2340 HSPA Mobile Broadband Network Adapterfor Windows 10

How to Install Driver HP hs2340 HSPA Mobile Broadband Network Adapter for Windows 10

If you have a HP laptop with a built-in hs2340 HSPA+ Mobile Broadband Module, you may want to use it to connect to the internet using a SIM card. However, after upgrading to Windows 10, you may find that the device is not working properly or not recognized by the system. This is because you need to install the correct driver for the device to function. In this article, we will show you how to download and install the driver HP hs2340 HSPA Mobile Broadband Network Adapter for Windows 10.

Step 1: Check if your laptop has the hs2340 HSPA+ Mobile Broadband Module

Before you proceed, you need to make sure that your laptop has the hs2340 HSPA+ Mobile Broadband Module installed. To do this, you can go to the BIOS and see if there is a mobile broadband adapter listed there and if so, make sure it is enabled. If one is not listed there, then your laptop did not come with the optional WWAN adapter, and without that, you cannot use the SIM card.

Download Zip

Step 2: Download the driver HP hs2340 HSPA Mobile Broadband Network Adapter for Windows 10

Once you have confirmed that your laptop has the hs2340 HSPA+ Mobile Broadband Module, you need to download the driver for it. You can use one of the following sources to get the driver:

[HP Customer Support]: This is the official website of HP, where you can find the driver installer package for the Ericsson HP hs2340/hs2350 Mobile Broadband modules. This package is available on supported notebooks that are running a supported operating system. You can enter your laptop model number and select Windows 10 as your operating system to find the driver.

[Driver Fusion]: This is a third-party website that provides drivers for various devices. You can download the Ericsson HP hs2340 HSPA+ Mobile Broadband Module network adapter drivers for Windows 11, 10, 8.1, 8, or 7 - 64-bit and 32-bit from this website. However, you should be careful when downloading drivers from third-party sources, as they may contain malware or viruses.

[Driver Sol]: This is another third-party website that offers drivers for free. You can download all latest versions of HP hs2340 HSPA+ Mobile Broadband Module Network Adapter drivers for Windows devices with Windows 11, 10, 8.1, 8, and 7 (32-bit/64-bit) from this website. Again, you should be cautious when using third-party drivers, as they may not be compatible or safe.

Step 3: Install the driver HP hs2340 HSPA Mobile Broadband Network Adapter for Windows 10

After downloading the driver, you need to install it on your laptop. To do this, follow these steps:

Uninstall any previous driver for the device from your laptop. You can do this by going to the device manager, and if there are any devices listed with a yellow exclamation mark next to it, right-click on them and select uninstall.

Reboot your laptop after uninstalling the previous driver.

Run the driver installer package that you downloaded from one of the sources above. Follow the on-screen instructions to complete the installation.

Reboot your laptop again after installing the new driver.

Go to the device manager again and check if the device is recognized and working properly. If not, you may need to update the driver manually by right-clicking on it and selecting update driver.

Congratulations! You have successfully installed the driver HP hs2340 HSPA Mobile Broadband Network Adapter for Windows 10. Now you can use your SIM card to access the internet using your laptop.

524038ac18