Using the spaces within the sculpture, the curvaceous forms of these abstracts explore movement whilst amplifying the natural beauty of the wood. The smooth curves and contours accentuate the fluidity of the pieces that portray themes found in mathematics and biology. Each one unique, Dirk Koolmees hand-makes the sculptures himself, using traditional tools such as chisels and files, having been inspired as a boy by his father who was himself a carpenter. He is expanding on this proud legacy with sculptures that challenge and delight.
Dirk’s work has been exhibited in galleries and hotels in North America and Asia, including at The Olympia Gallery, The National Gallery and the Hilton Hotel in Kingston, Jamaica, the XYZ Annual Art Exhibition, T'shop Lai Gallery and Amari Hotel in Vientiane, Lao PDR, and has been bought for private collections around the world.
For inquiries regarding availability of the sculptures, contact Dirk Koolmees.
A selection of sculptures is online available for purchase on Grand Laos.
Blue Eyes
Dirk Koolmees, 2026. Carved wood, 51 × 20 × 16 cm
How does it all start, and where does it all end? Usually it starts with a simple idea, a possibility, and then you once again get drawn into an avenue from which there is no turning back: the idea becomes an irresistible magnet, and you can’t stop until you have explored the full extent of possible outcomes. I initially drew a relatively simple upward curve, supported by circular discs that gave strength to a construction that would otherwise have been too fragile to carry itself. This simple design inevitably became more complex and took much longer to finish than intended; I worked on it over a four-month period. Complexity is a function of time, after all, as you surely know: over time all structure tends towards chaos, along the lines of entropy, and so did this sculpture. As I removed more and more wood, more openings appeared, not by random chance but by intent, and the piece became more fragile with every chip. In fact, The Fragile was its working title for a long time, after the Nine Inch Nails album I was listening to one evening while working. Gradually, the fragility of the sculpture became a representation of the fragility of life: my own life and the lives of others.
Last year I lost a friend who was younger than me and who suddenly found out he had stage four cancer. He was incredibly energetic and charismatic, always with a big grin on his face, and he loved life right up to his final weeks. He carried the immense discomfort and pain of the later stages with grace and a dedicated sense of black humour. I had known him for over a decade; I looked up to him and in many ways aspired to be like him. His passing, and his burial in the woods in Laos beneath a big tree close to midnight, made a deep impact on me.
It is therefore no coincidence that Blue Eyes rises in four stages, and for a while the sculpture represented a strand of DNA to me, wrapped around histones. Each twist is a curling band of wood that bends around a hollow and holds it the way a hand cups something fragile. Inside each hollow is an eye, its centre painted a clear, watery blue. The curves lean, wrap and reach, so that each stage carries the one above it and is sheltered by the one below. At the top, a fringe of carved strands, somewhere between hair and fingers, finishes the column like a hand laid gently on a head. It isn’t a smooth or perfect object. Like people, it shows its age, its scars, its mutations and its history.
The number four has meaning for me in other ways too. I grew up in a family of four children, and my own family has four members. I carry a tattoo on my back of four rectangles, shifting in proportion according to the golden ratio, to remind me every day of my family and what they mean to me.
The work is very much about the stages we pass through and about the people who hold us up while we do: our family and friends. Cherish them, love them, hold them up. They are what makes life worth living. Blue Eyes is a column of guardians. It is about growing, losing, and the care that carries us from one stage to the next.
This makes it a very emotional piece for me. It holds support, but also sadness, because we have to accept that life inevitably brings both gains and losses. Nothing is certain; or rather, the only certainty is that nothing lasts forever. How do we deal with all this without losing ourselves, or going slightly insane? I don’t have all the answers, but a healthy diet, regular exercise, good relationships with family, friends, colleagues and neighbours, a kind and forgiving heart, and a very, very big sense of humour to keep your own life in perspective will surely go a long way. Most importantly, perhaps: stay curious, stay engaged, and embrace every day, because in the end, dear people, every day is all you have.
This piece, although relatively simple in design, opens up a range of possible associations, some of which only presented themselves to me as I was working on it. I started to see biological references (ribosomes, strands of DNA, or oxygen bubbles escaping from a submerged plant), as well as mathematical ones (sinusoidal functions and osculating spheres). There are one or two humanoid figures to be found, depending on your perspective, which comes closer to the intention behind my original design, as the title suggests.
The word ‘tender’ implies care and emotional softness, but also vulnerability and possibly pain. Tender flesh bruises and tender hearts break. ‘Alignment’ suggests balance, convergence, and destiny. Together, the words describe a condition that is both beautiful as well as precarious. The two vertical elements of the sculpture are separate yet mutually dependent, held in place by the blue-centred spheres between them. The two figures lean toward one another without ever fully touching. The two circular openings - lined with blue interiors like portals, wounds, or eyes - function as points of attraction, drawing the viewer inward while helping to hold the larger structure in balance. The two figures depend upon them, just as relationships depend upon forces that cannot be measured. The forms remain distinct and aligned, firmly held together by reciprocal tenderness. That tension between separateness and intimacy is the emotional heart of the piece.
Painting the insides of the portals was an idea that evolved during the final stages, after browsing through a book on the work of Barbara Hepworth. Her coloured works from the Second World War period (for example, Oval Sculpture and Pelagos) are among my favourite sculptures and continue to inspire me. There is also an echo of Henry Moore, another source of inspiration, in the way the forms are both human and landscape-like. I can picture Tender Alignment, several metres high and cast in weathered copper, standing atop a windy cliff or on an undulating English hill surrounded by sheep - as Moore’s bigger sculptures often seem to be - and visible from afar. Perhaps one day I will have the means to materialize that image!
My daughter painted the portals for me and I dedicate this piece to her. It is a reflection on our own evolving relationship: two lives growing alongside one another, changing, separating, converging, and remaining connected despite the distance that time inevitably creates. Aligned forever, tenderly.
Recently I was watching the 2025 movie Sirât by director Oliver Laxe, which opens with: ‘There is a bridge called Sirât that links hell and paradise. Those who cross it are warned that its passage is narrower than a strand of hair, sharper than a sword.’. Without wanting to give too much away from the story line and plot in case you haven’t seen it yet, or this becoming a movie review, I will give a bit of context, as it somehow links to this latest piece (even if I hadn’t seen the film when I designed it). The movie follows a group of nomadic ravers who get evicted by the military from a techno festival in a remote desert and who travel through a rough and harsh landscape; searching for another festival they have heard of. They are accompanied by an older man who, together with his young son, is desperately looking for his daughter who has gone missing for months. The members of this travelling group are all scarred by life’s events, some mentally, some physically and they are escaping the realities of the world around them which has fallen into disarray amid a civil war, while also searching for transcendence and meaning. The road trip takes some very dramatic and unexpected turns as life catches up with them and they all have to cross that final bridge eventually, into either hell or paradise.
Death is a final bridge to cross for all of us, but undoubtedly there will have been a few other bridges on your path before then which have changed your life’s perspective or the perspective you have on life: transitioning between one state of your being to another. It could be the loss of a loved one, or the end of a relationship, or any other traumatic experience. Pivotal moments, where all that you thought was true, held to be certain and had taken for granted, changes, like the floor collapsing from underneath your feet. I came across one of those bridges at the age of 11, and if you’ll indulge me I will elaborate on that here (I have carried this with me for so long now, I might as well write it up as a therapeutic exercise).
When I was growing up, my parents were devout members of a Christian community who strongly believed in the trinity of the Father, the Son and the Holy Spirit, and in Jesus Christ as our messiah and Savior. Twice a week they went to prayer meetings in a local monastery and they often took me along. Summer holidays were spent with this devoted community in Belgian forests where days were filled with mass and Bible study. As a young child I took it all in like a sponge and regarded my parents as very special, spirited people, certainly different from all the other people in the village I grew up in. Particularly my father who had an almost priestly persona and a charismatic aura of wisdom about him. One of my strongest memories of him is him sitting at the kitchen table with his religious books when he was studying theology at the diocese of Den Bosch to become an archpriest, taking endless notes and studying the Bible with a solemn expression on his bearded face. Once or twice a day he would get up and tell me that he would be in the ‘silent space’ if I needed him. This silent space was a small room he had built in the back of our house hidden behind a door in a rarely used part of the house, or so I thought. I didn’t know about this space until I accidentally noticed a newly made door, which hadn’t been there before. As I curiously opened it, it revealed a room that was adorned with wooden crosses and icons of Russian origin, depicting Mary with baby Jesus on her arm. It felt like stepping into another dimension, which in some ways it literally was. A large Bible lay open on a praying stool he had built himself. My father was a carpenter after all, like Joseph, and in those younger days I regularly fantasized about being the chosen one, the newborn Jesus. This sounds preposterous now in retrospect, but in my childlike brain it was not (and I am certain this fantasy is not limited to me). I was often reminded of the expected coming of Jesus to announce the end of the world and I remember my mother talking about the everyday signs that this was going to happen sooner rather than later: the deterioration of family values and overall belief in God, wars, natural disasters, etcetera. Why wouldn’t it be me who was going to lead the last remaining believers to safety, across the bridge into paradise, while the immoral, sinning remains of humanity would fall off into the abyss of hell? My first name is Theodorus after all: Gift of God. This would be my gift to humanity.
Coincidentally, as a brief intermezzo, only last week my sister found out that my father was living in a monastery from the age of 16 to 19 (in the late 1940s, early 50s) to become a friar. He learned his carpentry skills there. She found a picture of him which resembles me quite a lot. In the black and white picture he is dressed in a black monk’s outfit and his image has a certain gothic appeal. I have a picture of myself of that same age which shows the resemblance, although I was a young punk in contrast, with a psychobilly haircut, and also a certain gothic appeal but in a completely different context, about to start my university studies. Our lives, only one generation apart, could not have been more different. My father eventually decided to abandon his spiritual calling at that adolescent point in his life and met my mother shortly after. The story of their relationship is also an interesting tale, complete with a few bridges to cross for them, but I’ll leave that for another day.
Back to my own Sirât. It was on a warm Sunday afternoon that my parents had taken me to one of their prayer meetings, which took place in a classroom in Belgium, just across the border from where we lived in the Netherlands. I had taken my friends along, two Vietnamese brothers whom I knew because my parents were a host family for refugees. They were newcomers in my primary school, after living for years in a refugee camp in Hong Kong and I had befriended the oldest one who was in my class. We were allowed to play football outside on the playground while my parents were praying with a group of about 20 people inside. I was very familiar with the rituals involving these meetings and I assumed today was not going to be any different. At some point I wanted to ask something and I walked unsuspectingly into the room where I had left them. I opened the door, not knowing this was going to be a passage that was going to stay with me for the rest of my life. I stepped inside and a sudden sense of bewilderment and confusion descended on me. I was facing a semi-circle of people with their hands up in the air, their palms and faces directed towards heaven. That was not an unusual sight to me. What was different this time was the sound these people were making. An undecipherable cacophony came down on me, spoken in a language incomprehensible to the human ear. My first thought was that I had gone into the wrong classroom. I wanted to walk out and find the room where my parents were until I saw them standing in the very center between the other worshippers; as if they were leading this bizarre and eerie ritual. Everyone, including my father and mother, was in some sort of trance, uttering animal-like, guttural sounds as if they had gone crazy
I didn’t realize then what was actually happening. Only later was I told that they were speaking in tongues: the voice of the Holy Spirit was manifesting itself through their bodies. The described effect on the unsuspecting observer of this peculiar phenomenon is potentially one of fear and skepticism. It certainly had that effect on me. That defining moment is engraved on my retina, in my brain. The foundation of my existence tilted in that instant until it turned completely upside down.I concluded that my parents were not special in the way I had once believed, but rather part of some religious cult, and must have gone completely insane. I realized simultaneously how naive I had been to believe in my own made-up fairy tale idea of my predetermined destiny. I felt betrayed by them, lied to and bereft of what I had considered to be true and had given purpose to my life up to that point. Following that experience I became emotionally detached from my parents and decided I had to mentally distance myself from them, their beliefs, the church and religion in general as much as possible. My teenage years were about to begin.
Life can be humming along nicely and you can, delusionally, feel in total control. All seems to be In Tune, until a dissonant chord strikes, the foundation collapses and you have to refind and perhaps redefine yourself. Life is a mine field, ladies and gentlemen. You can tread carefully but there will be narrow bridges with sharp edges to cross. What lies on the other side is uncertain until you get there.
Not falling off the bridge into the abyss is the key I suppose. Being able to forgive, love and accept yourself and others (as I have done with my parents), accepting the doubt and fear that comes with life’s changes, as well as traveling light, mentally speaking, will go a long way surely. And a little bit of faith in providence (see, I am still the son of a preacher man after all).
The piece was designed without all this in mind to be honest. The narrow passageway in the center has now been given a new meaning while I still view the whole as a vibrating tuning fork, symbolizing harmony between people, between us and the world. Life may be a minefield but there is plenty of safe ground to tread and play on, for most of our lifetime. Don’t take that for granted but make the most of it. The title In Tune is also a reference to ‘Turn on, Tune in, Drop out’, popularized by Timothy Leary in 1966 where ‘Tune in’ means to interact harmoniously with the world around you: externalize, materialize and express your new internal perspectives, bringing it back to the story above and my expression of it, even if 45 years later.
The piece was made between the end of December 2025 and March 2026 from a rather sizable log that I obtained from Allen Goodink, who runs a wood workshop in Vientiane, for which I am thankful. As for the result: I am certain my father, who crossed that final bridge in 1994, would have been proud and would have looked up over his glasses, saying ‘Not bad at all, son, not bad at all’.
The Devil’s Cave is an old limestone quarry near Maastricht, where I once (oh, about 35 years ago I guess by now), spent a memorable night with friends. Its main outstanding feature is the big oval window next to the entrance which gave the cave its name (apparently there is a reference to the devil being one-eyed somewhere in the Old Testament). Not that I was aware of that at the time (Wikipedia and the internet were a few light minutes away). We brought beers, some instruments and lit a campfire in the cave, forecasting spooky shadows on the limestone walls, and talked about many things and probably, for the sake of this story I am gonna assume as much, our futures.
Those futures have come and gone and are still here, further unfolding towards yet unforeseen horizons. The friends and friendships have dispersed since. Some moved away to other countries (as I have), some stayed. We remained single, or got married and perhaps divorced, had children or abortions, or neither, we lost our parents, siblings, or worse, children, or not yet. I think we’re all still alive, although some friends from that time are not with us anymore. Death being the great divider, between being able to think about the future and not having to worry about it anymore.
When my father was on his death bed (only a few years after my visit to the Devil’s Cave and way too soon), he would speak of dying as being a second birth. Birth is a shocking affair: passing through a narrow channel, from the serene, calm darkness into the sudden light and noise. Death to him was a similar, but reversed transition. He was a devout Christian I have to add here, so he was convinced there would be a light at the end of the tunnel. I am not a devout Christian (far from it), but as a devout mathematician the idea of death being an inverse function to birth appeals to me. Simply returning to where we came from. Ashes to ashes and dust to dust.
There are many sides to this piece and I regard it as a turning point in my sculpting career. One side of this piece reminds me of the Devil’s Cave. The gaping opening and the oval window next to the entrance have some resemblance to the actual cave. The Hollow therefore represents a passageway, from one end to another, from one stage of life to another, expressing the uncertainty, anxiety and excitement that comes from the crosspoints in our lives. The other side I regard as an architectural design and an unforeseen homage to Matisse’s Blue Nude II. The initial inspiration however came from the works of Henry Moore and particularly Barbara Hepworth.
Bit of a heavy title perhaps for this sculpture, which seems to simply want to emphasize the beauty of the female body. And beautiful she is, in sharp contrast to some of the ugliness in the world. The back story could have been about Gaza, or Ukraine, or any of the other wars currently happening in this world that degrade our humanity. Why are we still fighting each other? I just don’t understand. Given all the beauty created by modern artists in the early 20th century, I have always failed to grasp why the grisly First and Second World Wars happened. Such a contrast. My secondary school music teacher (I’m talking 1983 now) had a poster in his classroom that read: “What if there was a war and no one would go to it.” The poster depicted a young child with curly hair on a beach, making castles out of sand (maybe a reference to Jimi Hendrix, for those who know the song). Clearly my music teacher (equipped with equally long, curly hair and slightly scruffy clothes) was a hippie. We all knew that, and I think we mocked him a bit about it, I’m afraid, being young punks ourselves. But the message rang as true then as it does now. Wars are such a backward and medieval way of solving conflict, and the lives lost over it are such pointless wastes of human lives, never mind the emotional damage done to the ones left behind. War. What is it good for? Absolutely nothing (with reference to The Temptations song from 1969, the year I was born).
My initial thinking about this sculpture wasn’t about wars though. I know much has been said already about AI and the impact on society and on us individually: our intellect, our work environment, and our understanding of the world around us. And much more will be said surely as the capacities of AI start to unfold further and outperform us. I had an “aha” experience when I was playing around with generating music using a free AI tool. Within seconds of giving it a text prompt about what style of music I wanted, it produced four minutes of alternative rock music with a funky touch that was perfectly mastered, layered, with variations on the theme, crystal clear, and really not all that bad in terms of composition. It honestly kind of blew me away. I was both in awe and also frustrated, if not defeated. For a mere 8 USD a month, this particular AI platform allows me to produce 12,000 tracks per year and gives me the ownership rights to the music so I could distribute it as well. Just as if I had actually made it myself (which begs the question: “Is coming up with a text prompt a new form of composing music?” Music classes will look very different in the future if so).
I like to compose a bit of music myself: record several guitar and bass tracks and then spend countless hours mixing it all together, painstakingly creating the drum parts by hand on my laptop. Before I am sufficiently satisfied, I might have spent 20 hours rendering a four-minute track that is still far from perfect but that I am ready to share with the world without feeling all too embarrassed about it. Granted, I am slow, but why do we bother to create anything if it can be done much quicker by an algorithm? There are still some valid answers to that question, of course, and you can come up with your own (or ask AI if you’re not sure). It will probably revolve around highlighting the joy of the creative process of making music or any other form of art. Whether the final result of that long-drawn process is better than what AI creates in seconds is increasingly questionable (certainly in my case I will modestly, if not realistically, add here: I think I have already been outclassed).
Some people, perhaps somewhat romantically or nostalgically inclined, might add that our human brains have a creative spark that computer algorithms will never have, but I think that is wishful thinking and already disproved by “Move 37” when AlphaGo defeated Go champion Lee Sedol in 2016, a move that was described as creative, unique, and one that humans would never make. Like with a Turing Test, where a machine passes the test when a human can’t tell which part of a text transcript of a conversation between a human and a machine came from the machine, soon various forms of art will start passing the Turing Test. “Was that sculpture or painting really made by a human?” we will start to wonder as we stroll through museums. Was that news article or novel written by a human? Are the actors in that movie real?
Of course, AI will do a lot of good in many areas. In terms of scientific and technological progress, mathematics, health, etc., AI can and will do wonders. But there is always a “but”, of course, and unfortunately so. In a world where we can’t tell the difference anymore between what is real and what is fake, trust will start to erode. Trust in news reports we watch and read, trust in political, judicial, and economic systems where increasingly policy decisions, verdicts, and transactions are made by or based on advice from AI. Read Harari’s latest book Nexus for context.
As far as art goes, although I am a bit undecided still on some aspects, I strongly believe that we need to preserve important aspects of our human culture, our humanity, and to keep it free from “contamination” by the new religion of AI; to prevent sacrificing part of our humanity to the high priests of AI. Art should not become artificial (no pun intended). Of course, the cat is out of the bag and we are now guinea pigs in what might be the biggest social experiment in the history of humanity, with no turning back.
It is almost inevitable that at some point, being both an aspiring sculptor and a math teacher, I would create a Möbius strip. Not that I had planned for it. It was more a result of a rather brilliant design followed by rather poor execution, for which I am only to blame. Mea culpa, or “my bad,” as the kids like to say these days.
I had been playing around with parametric equations, as I sometimes do as part of my teaching job. Randomly throwing trigonometric functions together to create a looping surface in 3D space until it becomes something that looks pretty interesting from an aesthetic and sculptural point of view. After much tweaking, changing various parameters until I was content with the design, it was time to move from the digital to the physical.
I was in good spirits, a masterpiece was about to come to fruition, I was sure of it! But then I struggled immensely to make it fit into the dimensions of the log: a very humbling experience, to be honest, and I had to divert from my digital design and adapt. I felt like I was revolving in an Escherian world, trying to create an impossible structure. I was trying to connect the dots, literally, trying to figure out which lines were to meet, while I could see the damn thing on my laptop screen and rotate it and zoom in.
Frustration and excitement followed each other like waves on a beach. I slowly realized the whole thing was drifting toward a Möbius strip, like water to its lowest point. It was out of my hands. I had fallen into the Möbius trap and just had to accept the fact that I was finally, eventually, going to make a Möbius strip. Let’s call it an occupational hazard.
Now, I assume that everyone knows what a Möbius strip is. But here’s a reminder, just in case. A Möbius strip is an object that is a surface with one continuous side, formed by joining the ends of a rectangle after twisting one end through 180°. More formally, it is a mathematical object that is a one-sided, non-orientable surface. There you have it.
In common terms: if you were to put your finger anywhere on its surface and walk around the sculpture without lifting your finger, you would touch upon all sides of the sculpture before coming back to where you started. A continuous loop that touches all sides. This makes all sides of the sculpture part of the same surface. In other words: there is only one side to this sculpture. That is pretty amazing if you think about it (think about it!). There is no inside or outside; all sides are the same side.
Some (interesting or corny, therefore? You decide!) philosophical connections can be made: the Möbius strip symbolizes concepts like infinity, cyclical processes, and the interconnectedness of seemingly opposing ideas. It challenges dualistic thinking by demonstrating the fluidity between inside and outside, and the continuous nature of reality.
In any case: a bit Escherian after all! One of Maurits Cornelis Escher’s famous etchings is a piece where he has ants crawling on the surface of a Möbius strip. Look it up; it is pretty fantastic. He was a genius. I am merely graveling dust in his shadow.
PS
The parametric equation of the original design, in case you’re interested, was:
(x, y, z) = (cos(v − u) + u, sin(v − 0.5)·cos(u − 2v) + 2u, cos²(u)·sin(u − 2v)),
with v from 0 to 2π, and u from 0 to π/6. (If you plug this into Desmos 3D, you’ll see the beauty of it.)
The designated wood for this piece had already been around for five years in my collection of yet-to-materialize, future sculptures, a collection of slowly curating logs lying around the house. A heap of new, promising, yet undiscovered forms dutifully waiting to be excavated. The sight of them always fills me with excitement, dread, and anxiety. Excitement to create something beautiful from them; dread because of the physical and mental effort that ensues once I start; anxiety because of the possibility of failure. The process involves making decisions, choosing something over a hundred other possibilities. How do I convince and reassure myself that the decisions I am making are the correct ones? Nothing but the very same emotions therefore that everyone feels when starting something new that will take time and effort, and for which the outcome is uncertain for some time to come. But nothing will happen if you don’t overcome the dread and anxiety and focus on the excitement bit. What’s the joy in living if not? We all learn to live with uncertainty at some point. So let’s get to it and stop worrying too much.
The initial design was based on a half-eroded, spiralling shell found on a beach somewhere. A remnant of a holiday years ago, perhaps in Thailand, Borneo, or elsewhere; my memory lets me down here. A small artifact from another world, perhaps only 2 cm tall. Something you pick up, are intrigued by, and collect instead of tossing away like the previous dozens that made you bend over for nothing. This one was intriguing though because the erosion had revealed the smooth, symmetrical inner staircases in which some mollusc once lived. Like a shell’s version of a doll house. Discarded shells are re-used by other creatures like hermit crabs. I decided instead to let a more human figure occupy the house.
The tranquil expression of the face with its closed eyes made me first lean towards The Dreamer as a title. As I progressed, I started to see more of a sleeping astronaut with a funky-looking helmet. The wood had some tiny wormholes (much smaller compared to my last piece though, thankfully), and I began pondering the possibility of time travel through wormholes, as if the piece were a messenger from the outskirts of the universe that had travelled across time and space through a wormhole. Or perhaps from another era into the future. An ancient sculpture, made thousands of years ago. A messenger from long-forgotten worlds. From Atlantis?!
Historic artifacts are time travellers, after all, reminding us about worlds long forgotten. My hope is that this piece will also become a time traveller, and will be picked up hundreds of years from now in some curiosity shop by someone who wonders about its origins.
I was given the piece of wood by Pot, the man who always makes my metal stands and who runs a furniture factory on the outskirts of Vientiane. The wood was intended to be used for a table leg but was infested with woodworm and discarded on a pile of other leftover bits and pieces. It was hard to gauge how deep the woodworms had dug into it, and the wood looked nice and hard enough to make it an interesting project. I based the design on an earlier piece I had made (Tsunami) and started chipping away, hoping that the core would be relatively solid.
That hope faded quickly as I took more and more away; removing some wormholes, but opening new ones filled with compacted dust as I went along. Giving up is not in my nature though and I carried on, slowly accepting the imperfections. It is my default approach however to make every sculpture as smooth as possible. I find it aesthetically pleasing for one, but my inner-therapist also says it has to do with the naive, romantic longing for an ideal world in which I have full control over the outcome. We are all very aware of how limited the sphere of our influence really is and how dependent we are on overarching systems and mechanisms that are mostly beyond our control. We trust and hope, and some of you may pray, that those keep on churning and providing the services that we rely on, whether ecological, political or economical. But every day a new wormhole can break through a surface that seemed perfectly smooth, solid and stable before. It could be an earthquake, a famine, epidemic, war, or a geopolitical shift which unhinges and unsettles the existing order.
Unforeseen transitions tend to be unpleasant and unsettling, like mutations in DNA most likely lead to genetic disorders and rarely to an improvement. Sculpting is one thing where I should be in control and can come as close as possible to a Platonic ideal form - within the limit of my abilities of course - and where I am independent of outside events or other people’s actions. When I disappear into that shed, there is, or should be, nothing else but me, the wood, and the music. It is therefore also a form of escapism, but in a positive, therapeutic sense (at least, I like to think so although my inner-therapist may have another opinion on the matter). Being reminded of the uncertainties and pitfalls of life by the woodworm with each new uncovered hole, made it harder to focus solely on the work at hand and escape for a while. Bloody creatures!
In an attempt to smooth things over, literally and metaphorically, and maintain some sense of control, I made wood filler out of sand dust and wood glue and filled in the uglier and most obvious wormholes and cracks, mirroring the attempts we all make to deal with the jaggedness that life throws at us. Accepting at the same time that some unevenness can not be filled and will just remain distorted, tucked away in the bends of our ever meandering lives. The phases in life that we go through are all connected, transitioning from one to another, and all with their own ups and downs, some of which are smoothed over as time goes along, others still visible and present, reminding us that life can be both beautiful and ugly, even at the same time.
The inspiration for this sculpture came from a silver necklace I once made for my wife, Donna, about 13 years ago. The shape of that silver necklace, a sensually curved 8, resembles the inner curvature of this wooden piece. I added a second outer layer to emphasize the curvature by outlining it and to add some more complexity to the design, resulting in a sculpture that expresses a primitive feminine form with references to themes of sexuality, fertility, and regeneration. I imagine it could have been made in prehistoric times and worshipped by our ancestors or sent to us from an alien civilization as a symbol of peace and prosperity.
Symbols we could use right now, with parts of the world embroiled in conflicts that have the potential to escalate into a third world war and other parts mostly invested in their own economic prosperity by means of protectionism and nationalism. Conservative forces are drawing us back to the 1930s, back into a colonial mindset and imperialist era. Did the sixties actually happen? Liberal and social ideas of diversity, equity, and inclusion are rapidly becoming taboos. There is a revolution happening, but it is not one we should hope for: a revolution led by an oppressive oligarchy. A devolution, if anything—a degeneration.
The title for this sculpture, therefore, carries a political and societal load—unwittingly, since I like to distance my artistic work from wordly events of today and make pieces that carry into the future. I like to fantasize, somewhat immodestly perhaps, that in 200 or 300 years from now, they will still exist and be appreciated by whomever owns them at that time. If so, I hope they will live in genuinely peaceful and prosperous times.
‘In the concert of life, no one gets a program’ is an old 19th-century Dutch proverb that was painted on a tile hanging in my aunt's kitchen. As a kid, I would read it when we visited and appreciate the somewhat lighthearted perspective on life it offered. Well, relatively lighthearted anyway, in contrast to the more ominous ‘God sees you,’ which decorated the walls of some of my more somber and serious parents’ friends’ houses.
My aunt was indeed a lighthearted and friendly woman who treated me as if I were one of her own kids during the few occasions I stayed at her house for a few days. She would let me sit on her lap in the car and stir the car on quiet roads when I was 10 and bought me new clothes, whereas I was used to getting hand me downs from my older brother. She was a dog breeder and lived in the countryside in a house surrounded by dog kennels, with a large yard that even had a sizable swimming pool—which seemed extravagant to me given the Dutch climate but also exemplified her free spirit. She had lived in France for a few years in the early days of her marriage, which was an exceptional thing to do in our extended family. All thirteen siblings in my mother’s family lived in a few neighboring villages and met on Sundays in church and for coffee afterward.
I found the notion of living abroad immensely intriguing. I imagined she must have had a pool there, and that when her husband decided to return to Holland, she only agreed if they could have another pool in the garden. This was entirely my imagination, as I never found out why they had come back or what the circumstances were. My mother summarized the whole venture as, ‘It was a disaster, and they were very unhappy there.’ She would say this with some sort of underlying gratification, as if to suggest, ‘What were they thinking anyway, living in another country?’
It was quite a shock when my aunt discovered, at a relatively young age, that she had breast cancer, and she passed away not long after. I must have been about 12 years old. I remember her telling me quite casually that a lump had been found, shrugging her shoulders and smiling, which made me think it wasn’t all that serious. But in the concert of life, no one gets a program.
I initially wanted to name the sculpture ‘Three Imaginary Boys.’ Not because of the rather fabulous album by The Cure, but in dedication to Lenny, Harry, and Morrison. They were born as triplets, three months too soon, and lived very short lives, most of it spent in a Bangkok hospital, particularly the latter two. Lenny held out the longest, but the trauma of his premature birth led to a premature death after five years. Those years were full of dedication and care by many—first and foremost their parents, who had imagined and hoped for something else, of course, but who dealt with it in ways that are unimaginable.
One of the realizations in all this, for me anyway, is that there is no program. No meaning. No preordained destiny. Life is basically about how you deal with what it throws at you, both the good and the bad. You don’t write the program; you are the program.
Meander, therefore, as your life will do the same.
The slab of wood for this relatively modest sculpture came from Pot. Pot has created several metal stands for my bigger sculptures and I was visiting him to have two more stands made for my latest work. It’s always a pleasure to visit him in his workshop where there is loads of really nice wood lying around, all intended to be made into furniture, which is his main line of business. As always, after we discussed the dimensions of the new stands, I rummaged around looking for an opportunity to find something I liked and could take home. I pointed at several promising pieces but Pot just smiled, not giving in to my enthusiasm. I was about to drive off when he pointed at an oddly shaped piece of wood, saying I could have it for free, that it came from an old Lao temple beam - if I recall correctly anyway. It was not a very nice piece to be honest and I was a bit underwhelmed since it was oddly shaped with some odd cracks. I took it home with me, more out of courtesy than with a real intent to do anything with it. It was a gesture of kindness from both of us in some ways.
However, as it was the beginning of my summer break and with little else to do, I started cleaning it up, and chiseling away the cracked parts, thinking of what could come out of it, unsure of the outcome. This is always the hard part. My imagination is my limitation, and vice versa: I’m limited by my imagination and technical ability. It’s like solving a mathematical problem. I see my students struggling with it, on a daily basis. They may have the algebraic skills but can’t come up with a strategy to use them effectively in a new, unfamiliar situation. And I don’t blame them: it’s really hard to start something when you don’t know how it will end, also for me. It can lead to not doing anything at all, to paralysis. It takes courage to start working on something new, whilst not knowing how it will end.
This applies to all things in life, from something relatively simple as cooking to starting a relationship. To maintain faith in the process, to keep the faith that doing something will lead to something, and - hopefully - something good. It is most often the best advice I can give to my students: ‘do something’. Don’t worry too much, just start. Something good will always happen if you do something. Let go of the need for assurance, for the perfect plan. Just begin. Something good will always arise from doing something, even if it is only the act of doing itself. Even if it is just a gesture in the end.
Although I haven’t (as of yet anyway) designed any sculptures using AI, I have admittedly played around with image creators to see what kind of sculptures AI would produce given certain prompts (I even, somewhat immodestly, asked it to create a sculpture in the style of ‘Dirk Koolmees’ which was a rather funny but also disillusioning experience).
Otherwise the results looked really quite interesting I must say. Definitely inspirational. Not always feasible designs given that the images created are (for now?) 2D projections that don't necessarily translate into 3D objects that can realistically be made, but often rather resemble impossible figures a la Escher. How long before AI can create 3D designs that are immediately 3D printable I wonder as I am writing this. A naive question: one quick internet search later I realize, once again and certainly not for the last time either, that reality has already surpassed me. The software to turn a 2D image into a 3D printable figure already exists as it turns out. So in the near future I might not be sweating for weeks anymore - inhaling sawdust, getting blisters, cuts, splinters and calluses - but feed some text prompts into a machine, go to sleep and wake up to yet another masterpiece. Limitations to size and material will eventually be overcome with larger 3D laser cutters that can work with near perfect precision, even when imprecision is desired to add a human touch. Hey presto!
Will it be The End of Art As We Know It and/or The Beginning of Art As We Don’t Know It? Artistry may eventually end up being reduced to coming up with some good prompts (until we can outsource that to an app as well and then why not call it a day: what’s the point in that case, after all?).
Maybe not though. The invention of the digital synthesizer did not do away with the analog guitar (as some of my friends predicted in the late eighties). Streaming music did not do away with the market for vinyl. Kodak film has been picking up in popularity in recent years. People still want something that is ... real, I guess. I hope anyway. Something that reminds you of the process, the effort, the struggle, not just the accomplishment on its own. Real experiences that remind us of our humanity, our own limitations, faults but also our strengths. Having sex, or visiting Machu Picchu, by virtual reality is really not the same as actually doing it, going there and experiencing getting out of breath and reaching the zenith. I think anyway.
Maybe I’m wrong. Maybe viewing the world entirely through a screen, virtually visiting the Great Wall of China, binge watching Netflix and looking at art created by an algorithm, triggers the same dopamine synapses as the ‘real’ thing, releasing a temporary jolt of pleasure, surprise, astonishment albeit with an insatiable desire for the next trigger. What’s the distinction between real and fake, or deep fake for that matter anyway? It’s all in the mind after all. Biochemistry sits at the bottom of it all.
Do I care? Yes, very much so, for more reasons than mentioned above, including the mental health of the next generation, and no, honestly, not really. I’ll happily sweat and slave chopping and filing away at a piece of wood in my shed, also a form of escapism after all. Escaping from many things, more things than I wish to admit here, but definitely also an escape from digital media, which inevitably takes up so much of my own time. Yes, I am also one of the injured, as the Throbbing Gristle song goes.
I had only just started working on this piece when the accident happened. I was cycling in a peloton on my new carbon gravel bike, a Cannondale Topstone 3, together with twenty-odd other riders. It was early, just past 6AM, and I was tired after a poor night's sleep. A bit too tired and not as attentive as I should have been. I remember chatting to the person next to me, reaching down to put my bottle back in the holder, maybe taking a bit longer than usual, and when I looked back up my front tire was suddenly rubbing the rear tire of the guy in front of me. I instantly realized this was not going to end well. There is really only one possible outcome once you are in that situation and you’d wish you could stop time, rewind a few seconds and prevent it from happening. Perhaps in another dimension, in this one it was too late. It was the start of an irreversible chain of events that began with me crashing hard on the tarmac, followed by the rider behind me falling on top of me, and a third rider going down as well.
The shock followed immediately. I couldn’t believe I had fallen despite the blood weeping from scrapes on my legs, arms, fingers and face. All I wanted was to go back in time and undo what just happened. We weren't going that fast, just over 30 km/hr, but fast enough for a few broken bones between ourselves as we found out a bit later at the hospital. My broken thumb seemed insignificant compared to the rider behind me, who had a complicated fracture in his ulna. He was in a lot of pain and it was gonna take months for him to recover.
I felt terrible and I was mentally beat for weeks. Hardly anything bad ever happens to me, and now I caused another person to be in severe discomfort. I felt my guardian angel had left me and it was the start of a period of uncertainty and both physical and emotional recovery. I started doubting everything, starting with myself. This crash happened in a split second, going from a moment where everything is ok to one where it is no longer. I started expecting catastrophes at any time. Found it difficult to make decisions, and didn't trust my usual common sense or intuition. Not being able to sculpt, play guitar and cycle for a few weeks didn’t help. Fortunately all those things have come back to me now, although my still somewhat numb and stiff thumb feels like an alien body part and serves as a reminder that feelings of certainty are merely psychological tricks to make us believe nothing bad will happen to us. We surround ourselves with defenses and distractions, dubbed the ‘escape treadmill’ by one psychologist, to shield ourselves from existential threats. A neural mechanism that has evolved to allow us to deal with the present and not be constantly depressed about the unavoidable shit that will hit the proverbial fan in the future. That bang on the tarmac must have (temporarily?) stopped that mechanism from working in me. Ignorance, as it turns out, is indeed bliss.
The chain rule, to change the tenure of this otherwise somewhat somber narrative, is an elegant algorithm in calculus that describes how to find the derivative of composite, or nested, functions. It was first developed by Newton and Leipniz towards the end of the 17th century, who pioneered the concept and notation to deal with infinitesimally small rates of change and thereby providing the tools for describing velocity and acceleration, such as when cycling. Calculations that our brains intuitively perform. It's another neural mechanism that has evolved over the eons to successfully predate or avoid predation, or serious accidents. Despite having taught calculus for many years now, I made one miscalculation that morning that I will not forget. Mindfulness is also bliss.
The idea for this piece was born following my work as a facilitator in a yearlong online multivariable calculus course. Towards the end of the course, as I was thinking of possible final projects for my students to investigate, I stumbled upon the Oloid: a non-spherical, yet rolling solid invented by Paul Schatz in 1929, nearly a century ago. The derived Anti-Oloid is a parametric surface with comparable properties and is used in some industries for its ability to mix substances extremely efficiently. It has a beautiful symmetry and smooth curvature and is both esthetically and intellectually pleasing. For once I decided to create something that was not the brainchild of my own imagination but an already existing mathematical structure, more out of curiosity and as an exercise, to see if I could recreate it successfully.
The trunk I chose to use for this project had come from our handyman, Mr. Khammoun, who occasionally brings me pieces of wood. He had told me it was the type of wood from which paper is made in Laos, which would be eucalyptus if that is correct (locally known as Mai wiik, as my Lao language teacher told me later). With the help of my chain saw and Arbortech planer I made good progress and within a couple of days the rough outline of the Oloid had been accomplished. The next stage, carving inward to create the Anti-Oloid, was much harder and I had to go slow to make sure the symmetry was preserved as well as shaping the correct infoldings. It boggled my mind on occasion despite having plotted the surface in Wolfram which allowed me to rotate the object on my laptop screen so I could observe it from all angles. An issue I had was that a mathematical surface is technically infinitely thin, so I had to make my own choices as to how thick or thin I wanted the piece to be and attempt as best as I could to make it equally thick in all comparable inner-sections, which is not that easy when working with machinery on a 50 centimeter long piece of wood that cannot be clamped down.
I wanted the piece to stand upright but I didn’t want to drill holes in it either which presented a problem on its own. The wooden pedestal idea only came to me after discarding several other potential solutions. Some left-over blocks, shaped as parabolic conical sections, that I had removed earlier on with my chainsaw were still lying around and I figured it should be possible to create a slit with the right curve and depth so that the sculpture would slot in nicely and stand firm. Took me hours of carefully creating that slit, making it not too wide so that it would still hold the sculpture in place, straight up from all perspectives and shaped such that it would hold the piece firmly in place to prevent one of our clumsy cats knocking it over. That effort worked out pretty well, much to my delight!
The sculpture is extremely smooth thanks to hours and hours of sanding. Most of the original log gradually turned into fine sand dust that went everywhere. Tiresome but worth the effort (I am hoping for a smart robot that can do that for me in the future since my children refuse to do that part, even when I offer to pay them).
One reflection on this piece is the notion that the Oloid is a human invention, a fine example of human ingenuity, made decades before sophisticated graphical/mathematical software such as Wolfram was developed. Paul Schatz probably messed around with card board, paper and glue. Human ingenuity can reach incredible heights (a similar thing can be said about human stupidity) and one wonders if the recent release of AI in the public domain will herald an evolutionary tipping point. Are we going to ‘see further’ because we can stand on the shoulders of AI (to paraphrase Newton) or are we going to become so reliant on AI that our brain size will start to shrink and we eventually become slaves, whose main task it is to mine rare metals, make batteries and produce energy for intelligent robots; until the moment comes that they can do this by themselves (after all, we’ll program them to do this for us initially so we’ll inadvertently train them to become independent from us). It reminds me of the quirky notion, by Yuval Noah Harari, that it is chickens that have domesticated us, instead of the other way around: chickens are the most abundant animal species on the planet, fed by us and kept in sheltered conditions to optimize their reproductive numbers. Similarly, but potentially much more dangerously, we might think we are developing robots and AI to serve us, but we have already created a world, in only the last half century orso, where we are increasingly dependent on computer software and technology, accelerated by the internet since the mid-nineties. With the availability of AI at your fingertips, how long will it take before virtually everything you would have otherwise done using your brain, will come from ChatGTP and its palls. Will it still be possible to put the genie back in the bottle? I don’t think so but I asked the genie itself and it replied: ‘while it is technically possible to shut down specific AI systems, completely eliminating all forms of AI and stopping its usage would be a complex and multifaceted endeavor due to its widespread integration in modern society.’
I’ll take that as a ‘no’. We’re in for the ride.
Now this text has become longer than expected, should I run it through ChatGTP to reduce it a bit and make it more succinct? A bit funnier perhaps? Less ‘end of human race doom and gloom’ scenario, give it a cheerful ending, please!
In fact, I tried that and asked ChatGPT to make it a bit funnier. That was a disillusioning experiment. The output was not funny at all, in contrast: it was cold, clinical and dull. I am not going to suggest that this is because AI was developed in the US and has, one presumes, mostly been fed with self-absorbed and rather corny Netflix stand up comedy acts, but if this AI is going to generate all our series and movies in the future, I hope it learns to be funnier quickly so at least we can have a laugh as humanity races towards the end of the Anthropocene. It reminds me of the famous quote from Kierkegaard with which I’ll end: “A fire broke out backstage in a theatre. The clown came out to warn the public; they thought it was a joke and applauded. He repeated it; the acclaim was even greater. I think that's just how the world will come to an end: to general applause from wits who believe it's a joke.”
An inspiration for this piece, I must immediately admit, is the wood engraving ‘Rind’, by M.C. Escher that he created in 1955. If you are not familiar with this particular piece, you should look it up. The Netherlands have produced many famous artists over the centuries but I am most in awe of Maurits Cornelis Escher who has so elegantly explored mathematical concepts and visualized them in such creative ways. His oeuvre is mind blowing (especially considering, so I remind my students when they look at the reproductions in my classroom, that he created these without any digital means). I, in all honestly, merely dabble in the shadows of his grandness. Granted: it was ambitious on my part to attempt to create a wooden, three-dimensional sculpture out of a person whose profile is made up solely out of a wrapped bandage (apparently, for the ‘Rind’ piece, Escher was inspired by the 1897 H.G. Wells novel, ‘The Invisible Man’, which is a story about a man who turned himself invisible and has to wear bandages on his face to become visible again). I had been wondering for years if I should attempt a sculpture in this style and always postponed it but then I found myself on a Sulawesi beach in December 2022, holding a spiraling shell that reinvigorated the idea. I just had to try and see. So, after returning from that trip to Indonesia I started working on sketches and got the tools out. There was one sizeable wooden trunk that seemed strong and solid enough for what I had in mind.
I was only a few weeks in when our friend Jo Lidbetter died of heart failure. She was my age, only slightly older perhaps. We had known Jo for about a decade or so after moving to Laos. Jo had invited us several times to her lavish dinner parties where she prepared sumptuous meals for a full table of guests. She loved to cook, and to eat. Jo was a remarkable, generous and kind woman in many ways, too many ways to remark in this brief space. Suffice to say: Jo was an active part of the colorful fabric that is created by remarkable, exotic and outstanding expatriate individuals living in a remote country in a distant corner of this planet. She would make chocolate truffles for my birthdays every year, she recently edited my bibliography - the one that is on top of this webpage, Jo was an eloquent editor after all - and she came to my most recent exhibition at the T-Shop Lai Gallery in November 2022. By that time, she was suffering from long Covid symptoms. Only a few months later her heart said: no more. News of her passing came as a shock, even if her health had deteriorated. In the week that followed I decided to dedicate the sculpture to Jo, in memory of her. She always liked my sculptures and there is a kindness, tranquility and serenity in the face of the sculpture that reminds me of her. Farewell, Jo. Gone, but not forgotten.
Pictures of the piece in progress
This sculpture was donated to an auction for the Children's Hospital in Vientiane, Lao PDR
Sometimes, not too often luckily, people ask me where I get my inspiration from when designing sculptures. My standard, and slightly premeditated, response usually references my personal and professional interest in mathematics and biology. That makes perfect sense though: I teach those two subjects on a daily basis and there is plenty of interesting visual imagery in both fields. And indeed, many of my sculptures have clear references to mathematical and/or biological themes, as does this one. A satisfying answer therefore but it is only part of a story that is, perhaps disappointingly, much more mundane. I typically start with, simply, sketching smooth curvatures - as I had to do endlessly by hand when studying math as a somewhat younger man (although nowadays I use technology to plot 3D curves and surfaces. Not that I want to imply that I use cleverly chosen mathematical equations for guidance. Far from it, that would make the whole design process sound much more intellectual than it actually is). Basically, I just start doodling, like we all do when we’re bored. But doodling intentionally, even if intuitively, with an eye on the particular dimensions of the piece of wood, hoping that something good will manifest itself eventually.
Usually it doesn’t, not at firsrt anyway. I dismiss, discard, start again, in many iterations. Constantly trying to imagine what this 2D sketch, on paper, might look like in 3D, in wood: is this too simple, or too complex? Too pretentious, too much symbolism, too abstract or not abstract enough? Wrecking my brain, imagining it from all angles. Evenings pass, sketching stuff that ends up in the bin. I am getting worried that my biggest legacy will be a trail of wasted paper, pencils and erasers. There is, only, an infinite number of sculptures I can make from this piece; even when considering my own technical limitations, because there is definitely a much bigger infinite number of sculptures I cannot make. That thought in itself is potentially overwhelming and I need to ignore it otherwise I’ll never decide on doing anything. This reminds me of Willem Kloos, one of our revered Dutch writers, who wrote in 1894: ‘I am a God in the depths of my thoughts’. I have so many fleeting ideas, in the depths of my thoughts, some brilliant (but admittedly most not), about the next best sculpture, but how do I take that thought and convert it into something real? Can I even get close to what my imagination projects on my inner retina? Most likely never. It also reminds me of one piece of advice I give my students when trying to tackle challenging math problems: ‘Do Something’. Just start from what you know works, even if you have no idea yet where it will end. Have faith: something good will happen, once you start. Bottom line here is that my inspiration comes from within, of course fed by external imagery and ideas, twisted by my own gut feeling of what is needed to be successful in the end, and, not unimportantly, in combination with perseverance. Nothing complicated is going to be easy, after all.
In the process of sketching potentials (as I would refer to them), I do need to reach a certain level of satisfaction before deciding on a design, knowing that I will painstakingly work on the wood for a few months after committing myself, going through some serious ups and downs in the process, fluctuating on a daily basis between highs of certainty (“yes, this will look like a master piece, keep on going”) and depths of uncertainty and self-doubt (“this is painfully mediocre; burn the damn thing and, honestly: why bother? Just stop and get a life. Go cycling.”). This aspect is related to the nature of wood sculpting: there is little room for redesign once you start chipping away, in contrast to many other areas of artistic expression.
In this piece the biological component clearly stands out. When I incorporate ‘biological themes’, my designs lean towards feminine curvatures and, in this occasion, obviously, female genitalia. The piece hints at the female parts of a flower, a pistil with an ovary, ovules, style and stigma with a pollen grain in the top (or is it a seed already?), as well as a vagina which, I’ll admit, was my initial intention when I started sketching. Talk about inspiration! What is it that makes the vagina so intriguing, apart from simply being beautiful? Bookshelves must have been written about this so I won’t even attempt to discuss it in all aspects here: even if I have seen quite a few of them, that does not make me an expert necessarily, but these are my two cents. We spent nine months in such a comforting, warm environment, the uterus, supplied with nutrients and oxygen, distant sounds and alterations of darkness and light, blissfully unaware of the transition into a much colder, harsher environment in which we have to learn how to fend for ourselves. No wonder there is a desire to return to that state of being. To return to that birth channel, the passage way between before and after. The interface between generations. The passageway into the unknown. The seat of inspiration.
PS The title ‘Seat of Inspiration’ is also an insider’s reference to a song I once composed when playing in a band during my college years and wrote my own lyrics: ‘Look for the seeds of inspiration and spread them through your mind. Feed them with your memory and thoughts of any kind’. This song still lingers somewhere on Youtube I just noticed. Maybe I should just send the link to this recording, whenever someone asks about my source of inspiration.
The bulky piece of wood had been given to me by our handyman, Khammoun, well over a year ago already. Khammoun regularly expresses his enthusiasm about my woodwork and brings along some wood every so often for which I am always thankful, although I wasn’t so sure about this particular piece. It was a circular slab, about 15 cm thick, with a 60 cm radius and weighing a proverbial ton. Not exaggerated: I could only just lift the thing by myself. More concerning was the notion that it was incredibly dense wood and rock hard. Khammoun had told me it was the type of wood used to make large circular chopping boards. I now know why. The ‘damn thing’ had been leaning against the wall outside my shed for months and had filled me with dread and guilt every time I looked at it. The thought of carving into it was very intimidating and I had been putting it off – nearly indeterminately.
Once I started chipping away at it, bit by bit, making hardly any progress at all, I was cursing myself and Khammoun and the wood and, while I was at it, the entire universe. Much to my dismay, I damaged some of my favorite chisels as well as broke a few drills. I am not one to give up usually once I start something but I came close on many occasions with this project. Even my chainsaw wasn’t making much of a dent into the block. It was purely a matter of willpower and perseverance that I was able to complete the sculpture after about four months.
When I look at my finished sculptures, I don’t remember the blisters, the cuts, the pain, the whole seemingly endless effort. Much like a young mother forgets the immense pains of labor after giving birth. Which makes a nice bridge to the original foundation of the design: a pack of wriggling sperm cells - on their way to an anticipating egg cell perhaps. I was even going to call the sculpture ‘Zona Pellucida’ but then as the piece transformed so did my perception off it and I decided to entitle it ‘Comet’ in the end. Not completely letting go of the gametes connotation mind you: there is a hypothesis regarding ‘life’ (albeit in the form of nucleotides, the building blocks of DNA) arriving on Earth by means of a meteorite and it is funny to imagine a cluster of sperm hurling its way through space to fertilize Mother Earth. Scientific rubbish but I am sure James Lovelock, who proposed the Gaia hypothesis, would find the metaphor entertaining. Note that ‘Panspermia’ was already suggested 2700 years ago by the Greek philosopher Anaxagoras, suggesting that life forms get distributed through space by dust, meteorites and comets. I find myself in good company therefore.
Lastly: I owe a big ‘thank you’ to the local workshop in Lao PDR that made the stand for this 25 kg heavy sculpture. They are called ‘Laos Live Edge’ and deserve your business (highly recommended, if you happen to live in Laos).
The piece of ‘palisander’ wood came from Michel Saada, the French owner of the T’Shop Lai Gallery in Vientiane who is not only a charming person but also very gifted, creative and a generous soul. Michel focuses more on his paintings these days, but he has made sculptures as well. He is a cabinet maker and I admire him for his designer furniture, some beautiful pieces of which remain in his house next to the gallery. We met last year and Michel has kindly put up some of my work for sale in the gallery and, as said, gave me this log to work on.
This trunk had been left outside for what appeared quite some time and had been exposed to the elements. Much of the softer inner part had been partially digested by termites already and a few cracks ran all the way from top to bottom. So, my design options were limited as I had to work with the outer shell only. The good parts that remained were beautiful though, shining with a warm dark brown color and fine grain. I wanted to expose those parts as much as possible and this curly design of loops created movement and surface area, as well as intriguing openings and invaginations. I played with the title ‘Labia’ for a while therefore, as one can obviously imagine, but I settled on a term that my son suggested: ‘Sinuous’, as it associates with the curvaceous sine function and refers to the Latin term ‘sinus’ which implies folds, hollow curves and cavities in the body. And then there is the sinus node which is the origin of your heartbeat - but now I am getting carried away with references to human physiology so I will not elaborate on the resemblance to the typical folds in the cerebral cortex which is mostly coincidental if not farfetched. Rather, for me there is something both sexual - labia after all – but also sinister about the sculpture. I associate the darkness of the wood and the convoluted twists and repeating - but deformed - patterns with troubled thoughts as well as the irreversible progression of time and predetermined future. After all, with all matter set in motion we are all prisoners of our own biochemistry, with the mere illusion of a free will.
This peculiar piece of wood came from one of the trees that got cut down at the Technical College on Chokpaluang, a main street near our house. It was a real pity to see those trees go and it is still unclear to me why they had to be butchered. Perhaps they were interfering with the spaghetti of hundreds of electric wires too much, who knows. The main parts of the trees were quickly carried off but a few branches were left. I saw this particular piece from the corner of my eye as I drove past and stopped impulsively to put it in the back of my trunk. It must have been lying in my shed for about a year before I started removing the bark and pale sap wood which was a few centimeters thick. The inner heart wood was nicely brown colored with no major cracks - a good sign.
The design options with such a slender and oddly curved piece were limited, or should I say, not as infinite as usual, and were somewhat led by my dear wife Donna who had expressed the desire for another shell (as I made one for her years ago that subsequently got sold leaving a gaping vacuum). I have always been intrigued by the elongated spiral shells of the Turritella, a genus of sea snails with their mathematically perfect spires and they formed the basis of the design. Of course, the branch was curved so inevitably it initially started to look more like a horn of a kudu or mountain goat. Spirals in nature are everywhere after all.
As I worked on the piece, I imagined it was an architectural design for a bridge in some futuristic city to remind urban dwellers of their natural origins. I calculated the dimensions of the curves to fit the Fibonacci sequence but this turned about to be too regular for my taste and I eventually resorted to simply wrapping a string around to mark the widths of the turns which added a bit more irregularity to the windings. Nature is chaotic as well after all (which is also mathematical in principal but inherently unpredictable so I added some randomness ‘a la Jackson Pollock’ to make it look more natural).
As I progressed, people started to comment that it reminded them of a backbone with vertebrae which eventually lead me to the title of ‘notochord’: a cartilage rod that is formed during embryonic development in the phylum of Chordata to which humans belong but also fish, amphibians and even invertebrates like the amazing Tunicates – a subphylum with about 3000 species (look up the panda sea squirt if you are interested). Anyway, not to turn this is in to a biology lesson, I think my point here is that a notochord also forms a bridge, an evolutionary bridge that is, between us and so many other species. In our humble embryonic beginnings, we are virtually indistinguishable from salamanders or lancelets. So why do we think ourselves so important in comparison to the 8.7 million other species that we share this planet with? Our oversized brains most likely: both a blessing and a curse. Despite all our technical accomplishments we are nothing but vessels of DNA with our main purpose in life to pass them on to the next generation. Just like the lancelets do.
I accidentally stumbled upon three magnificent and sizable slabs of wood as we took a wrong turn into a back street in Vientiane. They were casually lying around in a grassy plot next to the remnants of a cut down tree. As Donna and I parked the car to see if there was anything useful in the pile, a man approached and after some short, but mutually satisfactory negotiation we loaded the slabs into the back of our truck. A few months later I started working on one of them over the course of a long summer in semi-lockdown. The borders were still technically closed and although it might have been possible to visit Europe, we decided to stay put in Laos given all the logistics of travelling, including quarantining, opening up a sea of time to work on a new sculpture.
I played around with sketches of ellipses, isoclines, soundwaves and the Doppler effect in my initial designs, looking for a repeating and expanding pattern that would suit the dimensions of the wood - which was from a Burmese padauk tree presumably: Pterocarpus macrocarpus. A leading inspiration during the process was music (I cannot work on any piece without listening to music which provides the drive to keep going for hours, deep into the night all too often; so I guess it was about time to give it some sort of homage). The piece, rather coincidentally, resembles the body of a guitar, my preferred instrument after all, but I was more thinking of sound, pitch and modulation in the design stage. In retrospect I can see a subconscious influence of the torqued ellipses of Richard Serra that are exhibited in the Guggenheim in Bilbao but that is more an afterthought if anything and certainly not on the scale of those huge metal structures, made with such incredible mathematical precision. As I look at it now, I like to imagine the piece as materialized music. But then I might think of a growing embryo, or the ever expanding universe. Pythagoreans used to believe in a cosmic music created by the harmonic distances between the planets, musica mundana, so there is an overarching theme there perhaps. Perhaps.
One thing is for sure: I never regret taking that wrong turn.
This sculpture, made from rosewood, was finished during a second lockdown in Vientiane, Lao PDR. The working title 'Surrender' was given an unintended second meaning as we, the almighty human race, were surrendering, involuntarily, to a non-living piece of viral RNA that operates on a nano-scale unfathomable to us. The consequences it provoked (mostly revolving around stay-at-home as much as you can) thankfully aided the progress that I made on the sculpture, although it still took about two months to complete. More importantly, working on the piece helped in terms of providing a much needed distraction, if not escape, from reality - almost in a therapeutic sense - although this generally applies to sculpting, regardless of a lockdown.
At least this sculpting thing is something I can control, with only a few limiting factors to consider: predominantly my technical ability, imagination and grit (in that order I'd say and I hope one day my ability will catch up with my imagination). More tools would be helpful as well mind you: I am very close to buying a small chainsaw but in the meantime still rely on my usual set of chisels, rasps and files and endless pieces of sanding paper. I romantically cling on to the idea that there is some credit in doing everything manually. (Perhaps a nasty remnant from my Catholic upbringing: the persistent notion that all my blisters, cuts and sore shoulders - suffering in other words - will eventually lead to reward.)
The windy path from a rough trunk to a silky-smooth sculpture does involve surrendering, voluntarily, to the effort needed to reveal the beauty of the material and the shapes that hide beneath its surface. Surrendering to love in other words: the love for what you do, for yourself and for those around you - which comes closer to the intent of this piece. Few things in life are as gratifying when all these processes result in something to cherish, admire and be proud of, in all walks of life.
This beautiful piece of hardwood was brought home by Donna following a fieldtrip in the Lao countryside. The wood had a wonderful aroma to it and was still oozing a reddish resin so I left it for a few months to cure. I had never worked with rosewood before and I was both eager and anxious to put my chisels into it. There is always that mixed feeling of wanting to start something new and yet unknown, combined with the underlying fear to mess it up; especially with such a nice piece of wood. I spend quite some time on the design subsequently, sketching different ideas until I settled on this one. I worked on it, almost on a daily basis, over a 2-month period. The wood was great to handle, although the hardness cost me one chisel and a substantial amount of filing and sanding, accompanied by regular cursing. But the more I excavated and approached my design, only changing minor details, the more I liked it. If you'd ask me I would say it is one of my most erotic designs. The title 'Synchronicity' lingered in my head. Apart from referring to two simultaneously emerging, intertwined bodies, it also points at the complement, 'asynchronous', which embodies so much of interhuman communication these days.
The piece of wood has been laying around in my shed for months. I had created two other pieces out of the same tree already (Juxtaposition and Conic Intersections). It was a dodgy looking piece of wood, with nails and substantial parts of it eaten away by termites. Relatively soft wood. So I wasn't sure it was gonna work out well. After chopping away the bad parts a human figure appeared. Female, well, to my eye anyway but maybe I am biased. Luckily, since I much prefer the female body over the male. Women are so much more distinctively curved and appealing. Known to drive many many a good man crazy. And I was going a little bit crazy at times about this sculpture. Most days I was elated, thinking this was going to be a master piece. But some other days I was disillusioned, down, thinking it wasn't going anywhere at all. I relied on my gut instincts, kept on carving and filing away, opening up new parts, finding new curvatures and drilling a big hole from front to back to isolate the Venus hill as a separate entity. She started to look voluptuous and slender and erotic. Slowly but surely my doubts evaded and she became a robot-like creature, both sexual and confident. A modern angel.
This piece was made out of a sliver of a 100 year old teak tree that had to make way for the further development of mankind. In this case a sports field near our house. I often make my sculptures out of discarded pieces of wood but it rarely is of this quality. I had seen the left over pile for some time already before I got the courage to cycle in and snatch whatever I could. On the way out, the rough piece of wood laying on top of my handle bars, the owner of the sports field came out of his office and stopped me. I had to use all my smug charms to explain my intentions and I got away with it. I started working on it before the lock down, caused by COVID-19, hit the world. I worked on it while society came to a sudden and dramatic stand still. By the time I finished it the world was still in containment mode but there were signs of improvement. If you wanted to see them anyway. Hope is life, life is hope, after all. What will the world look like once we finally come out of this 'new normal'? A new beginning or back to business as usual, looking back in amazement at what on earth happened, a few months from now? The title suggests a linear progression, that things will change. Or does it?The sculpture itself suggests periodicity. Life loops around itself, turning back on events and inevitably repeating things all over again.
I don't want to necessarily make such a strong connection between my sculpture and contemporary world events such as pandemics. I am not that interested in short term events. The theme of the piece revolves more around continuity. My kids growing up and creating a life for themselves that is both different and the same to mine. Creating another loop in the fabric that spans us all.
Another tree had been cut down. I noticed it in passing when I was dropping off my son Max at his friend's place. It had been a huge tree. The trunk must have been over 2 meters in diameter. Beautiful dark wood in various shades.
I parked our truck on the way back and picked up a relatively small cutting that was cast aside. The main part of the trunk was way to heavy and earmarked for sale. Nobody was gonna miss this relatively small cut, and I lifted the piece, still heavy because of the freshness and density of the wood, in the back of the car.
I had made a 'disj' before and it had been 11 years since. That earlier dish is with a friend in Jamaica where we were living at the time. I decided it was time to create another one for ourselves.
'Disj' is taken from the word 'bisj': the ceremonial sculptures in Papua New Guinea. My 'disjes' look nothing like those slender totem poles mind you. But I reckoned the title made it sound more artistic. I am not in the business of making functional objects after all!
The design of the dish, three sections with rounded walls in between, was inspired by terraced rice paddies, a common sight in Lao.
We have a sauna not too far from where we live in Vientiane. This local , Lao-style sauna uses wood fires to heat the water for the sauna. Huge piles of wood are stacked outside ready to be cast in the furnace. Whenever I cycle past I glance over at the stacks of wood, looking for good pieces.
I stopped there one day with Max to get a decent piece of wood for him. Max had expressed interest in making a sculpture. His interest faded quite quickly when he found out what it takes in terms of perseverance. So I ended up working on this piece of wood that was originally intended for him.
The design is architectural: it is in essence a rough design for a large 7-store building with huge semi-circular windows where the gaps are.
This is my most bare, most naked sculpture to date. I always like to take away as much wood as is possible but I have never gone to this extreme where the sculpture becomes a mere collection of strokes. Like calligraphy almost. In retrospect it does indeed somewhat resemble a Chinese character but it was never intended as such. I simply like smooth curved lines that either run parallel or in opposite directions.
The wood was poor quality, I had taken it from a cut down tree that had been left on the pavement. I was constantly concerned about the fragility of the piece whilst working on it. The latter stages consisted of hours and hours of filing, not chiseling anymore out of fear of breaking it.
Bird-like designs have always intrigued me and have become a strong theme in my work. Why? It may have to do with my fascination with the beaks of horn-bills.
As a young kid growing up in the Netherlands, where the rather boring sparrow rules the land, these birds were so exotic, colorful and alluring. Beaks of horn-bills were so perfectly curved, and huge! Their sheer size fascinated me. Gracious but powerful and potentially dangerous.
Birds and mathematical curvatures go together well I had already discovered in previous sculptures. The Mathematics of Poultry that I had made a decade earlier had taught me that. This piece, Conic Intersections, is a continuation of that idea. The bird is a collection of circles, hyperbolas, ellipses.
This sculpture literally sits in my living room and I look at it every evening with much delight. I love the voluptuous curves on the piece and the sexual appeal 'she' offers. The round thighs, the belly, the vulva, the pointy upward breasts. She is the goddess, the Earth, the lover and a mother. She is everything a woman has to offer.
The wood adds to its mythical appeal, the oak being a sacred tree in Celtic paganism. The head is abstract to emphasize the non-human nature of this deity. In that sense the design resembles an earlier design I had used for my second sculpture in 2002 (Lady Bird). In that sculpture I wanted the head to robot-like, here the head makes more reference to the object being a fertility symbol, with a nose that resembles a protruding glans. So our deity has male characteristics still.
This piece is dear to me for two reasons.
The first one is that my mother gave me the wood and said it had come from my late uncle Harry's backyard. It was a piece from a walnut tree that had been growing there for many years. I didn't have a very strong bond with that particular uncle when I was a younger kid ( I had about 16 uncles and aunts after all), but when I was older, and after my father had passed away, he became a close friend to my mother, his sister. Uncle Harry had lost his wife already many years back and now he was struggling with his own health, suffering from emphysema. But he he was a regular visitor to my mother, and made sure she was ok, arranging wood for her stove in cold winters among other things. Most importantly he was a companion for her, somebody she could trust and rely upon. Siblings. He died well before my mother. One of my deep regrets is that I had the chance to thank him when I visited him on his death bed, but I didn't. I couldn't, being too afraid I was gonna cry in front of other people present.
The other reason this piece is important to me is that it also represent my own two kids. I can only hope they will stay in touch with each other and support each other long after I am gone.
It must have been spring when we were walking in the Belgian woods near our home for the two years we lived there. An oak tree had been cut down, perhaps already a year ago going by the moss and fungi growing on it. The core appeared in good condition so I carried it home on the back of my bicycle. The piece was longish, slender almost.
The work was inspired by the onset of longer evenings and plants shooting in the garden. A dicotyledon coming to life.
It had been six years. I can't believe it when I look back now. I hadn't sculpted for 6 years until I picked up the tools again and created this relatively small piece, made out of oak. I had picked up the small trunk during a walk through the woods near our new residence, close to Antwerp, Belgium. It now resides in New York with a friend.
Why didn't I sculpt for 6 years?
Well, there are a few angles I can take on that question but the answer would mostly boil down to being preoccupied with other things. My revived teaching career (paid!) and family (not necessarily in that order) had taken over my priorities. I had picked up my electric guitar again (after 12 years of not playing...so perhaps these creative urges are simply cyclical and manifest themselves in periodic fluctuations). Anyway, I was pre-occupied elsewhere and sculpting had been pushed to the background. Until the day that I moved to Belgium from Laos and the band stopped. I was devastated about that (little did I know that I would rejoin the band 2 years later when we moved back to Laos for a third time). In the meantime, sculpting became my outlet once again.
We had visited Angkor Wat in Cambodia and the images of the many Buddha heads had stuck on my retina. I was fascinated by the place. So much history. Wandering around the many temples, palaces and shrines that dated back to the 12th century. Half closing your eyes and imagining the events that had happened in those now overgrown grounds. It was utterly thrilling.
'In dreams you are mine all the time' is a line from the band Coil, taken from the song Love's Secret Domain.
The title for this sculpture was inspired by an article I read about Caral, one of the oldest cities in the world, based in modern day Peru. It is estimated that people lived in Caral from 2600 BCE. The article mentioned the lack of weapons found on the archaeological site where the city had been, suggesting it had been a peaceful society, mainly trading fish with more inland tribes.
This was the last piece out of 18 pieces of work that I created in Jamaica. I have since removed the white paint to give it back it's original color. It is currently located at my sister Lia in The Netherlands.
I regard this as one my best pieces still. It was inspired by Danaida, a beautiful sculpture from Brâncuși made in 1918. Danaida only had a head. I pretentiously added the a torso and abdomen.
Krassimira Popova (1945-2009) was a lady that I never met but that had contributed to a short movie I was making at the time. The title of that production was 'First considerations after dying'. I had asked people to write about what they would think their first very thoughts would be, if they just had died. An impossible proposition of course, it was only a thought experiment. Several people contributed (the result is here) and one of them was Miss Popova. She passed away in the process of making the production. I dedicated the movie and this sculpture to her.
The wood had come from our own backyard in Kingston, Jamaica. It was amazingly hard. It wasn't the locally known Ironwood (Lignum vitae), but a local had told me that it was 'Jamaican oak' but I think he just made that up since he didn't know what it was. I think it was a tree species related to the silky oak. Anyhow, the point being that the wood was hard enough for me to break a chisel on. That was a first!
Sold
This sculpture was continuation of the Crown of Sympathy, a sculpture I made a year earlier. I liked the flow of fish (or were they sperm cells?) in that sculpture and here they became strands of hair that flow from a ladies head. There is a reference to Medusa obviously but also to dreadlocks. I was still living in Jamaica after all. As a bit of an afterthought I had called the piece 'Angel of Dreams' based on the sleepy eyes and the idea that the strands coming from her head indicated a dream-like state. Some of my friends thought that was corny and made fun of me. They were probably right.
Sold
I met Morekeia, the exotic daughter of (now late) famous reggae singer Gregory Isaacs, in Jamaica. She was very attractive, there was no denying it. We were gonna work together on a movie. I had recently won an award in a digital film contest and was given the opportunity to use an x number of hours in a professional recording studio. The details escape me now since it never happened in the end. Morekeia had contacted me following the award ceremony and we met a few times to discuss the details of the story we were gonna film. It was gonna be about Jamaican kids with extraordinary talents. Musicians, athletes.
I was making this sculpture at the time and realized that there was a resemblance between the piece and Morekeia. Or perhaps I just wanted to see that. Hence 'Quest for...'. I also thought Morekeia a beautiful name, befitting this piece.
The log that came from a beach near Ocho Rios, in the north of Jamaica. The wood quality was poor and the grain not very appealing. It lead to the decision to paint the sculpture white. Very unlike Morekeia in fact.
The design of the piece resembles my second sculpture (2002, Lady Bird) and is a continuation of that theme.
Sold
The title of this piece evoked quite a few questions after sharing it on social media. Perhaps best left unanswered. Perhaps I was listening to James Brown when working on it. Or Carter and the Unstoppable Sex Machine. Perhaps explaining too much takes away the mystery, destroys the fantasy. Not perhaps, it does. So I won't. You decide.
The sculpture reminds me of sci-fi movies, David Cronenberg's Naked Lunch in particular. It incorporates elements of intimacy, desire, creativity and pleasure but also disengagement and fear. Master and slave.
I often regret selling my work and this piece is no exception to the rule. My main consolation is that I have left traces around the world. I hope this piece found a good home. I believe it is currently in Germany.
Sold
This is my second piece that fuses wood and light. The strip light is straight, symbolizing technology, the wooden 'lamp' is curvy, symbolizing chaos. I am playing here with the notion that there is no such thing as a straight line in nature.
As the architect and artist Hundertwasser claimed 'The straight line leads to the downfall of our civilisation'. An interesting notion that I have often talked about with students. The question is: do straight lines exist in nature or are they purely a mathematical concept?
This piece remains in Jamaica, with Rosemary Thwaites, the wonderful owner of the Olympia Gallery in Kingston.
Sold
It was a piece of driftwood that caught my eye one sunny day. Lying dried out on a beach near Kingston. It already had a certain sadness to it, the way it was lying there, abandoned, and the droopy old eyes were easily imagined.
This piece remains in Jamaica, with Rosemary Thwaites, the wonderful owner of the Olympia Gallery in Kingston.
Sold
Sometimes you end up with flattish pieces of wood that seem destined to become something functional like a dish. This was one of those pieces. It has a flower like design, with petals and a landing spot in the middle that could be the stigma, the female part. It could also be, somewhat more mundane, a plateau for a dish with snacks.
'Disj' is taken from the word 'bisj': the ceremonial sculptures in Papua New Guinea.
This piece lives with a friend in Jamaica.
Sold
The tree had given way to new apartments being built somewhere in uptown Kingston. It had a Y-shape fork in its stem where it had branched and the men had cut out this part and left it on a big pile. I drove by, saw the opportunity and carried the rather heavy part of the trunk back to the car.
The fork inspired the idea of making a mathematical saddle, a combination of a concave upwards and downwards parabola.
The abstract bird like shape came naturally as a result. The wings and feet have become the concave down parabola. The head and tail feathers the upward one that is perpendicular to it. The chest of the bird is the heaviest part of the piece and is essential to keep the balance of the whole sculpture. It stands very nicely on its two feet which fills me with some pride because it took quite some effort to get that right.
This sculpture is one of my most favorite pieces and I am very happy that it is still in my possession. My surname is a bird species first of all, which partially explains why so many of my sculptures have bird like features. Secondly, my late father, who was a very skilled carpenter, used to work in a wood work shop which had a logo that I remember as similar to this design. But I only have a vague memory of it, from when I was a kid and went with my dad to this workshop in Eindhoven, the Netherlands. Now that I think of it, my most favorite activity there as a 10 year old was to use the air compressor to blow off the thick layers of sawdust from all the huge saws and machinery. A fond memory. But that is besides the point. The point being that the memory of this logo is so vague by now that I wonder if it is actually a true memory. Maybe it is completely wishful thinking that there is a link between this logo and my sculpture. Isn't this how we try to give meaning to our lives, the world around us, the powers that we cannot control. We look for patterns in the chaotic tapestry and use those patterns to stimulate out minds, to feed our sense of perspective and humor, to escape mortality.
My thoughts at the time lingered around the concept of duality in mathematics. What is that? An example. Two non-identical points determine one line and one line exactly. You can only draw one unique line through two points. At the same time two unique lines determine one point. When you draw two (non-parallel) lines they will intersect in one unique point exactly. This also works in higher dimensions. Two three-dimensional lines determine a plane, two planes determine a line. three points determine a plane, three planes determine a point. This is all simple stuff and easily verified. But how do we continue this into 4 dimensions? Do four hypercubes determine a plane and four planes determine a hypercube? And what does this have to do with the sculpture even?
Nothing and everything.
The wood that I used for this piece was lovely. Super hard, so-called Jamaican oak. It had been cut down from trees in the compound that we living in at the time at The Pines on Millsborough Avenue in Kingston. The first impression that the piece gave to people was that it was phallic. Understandably. Never mind lofty discussions about duality in four dimensions.
In the end, it is all in the eye of the beholder.
Sold
This piece was exhibited in the National Biennial in 2008 at the National Gallery of Jamaica alongside the work of many Jamaican artists. Participating in this exhibition was prestigious, an acknowledgement of accomplishment. There were paintings mostly, but also sculptures and installations.
I was very, very proud that one of my pieces had been chosen for this national exhibition although I had much rather wanted another piece to go in. The criteria for selection however stipulated that a piece could not be entered if it had been exhibited elsewhere already. I really wanted to enter 'The Mathematics of Poultry' but that had been exhibited earlier that year at The Olympia Gallery run by the lovely Rosemary Thwaites so it was not allowed. The Crown of Sympathy was a newly finished piece and had never been exhibited before so I had little choice to enter it despite my reluctance. A few days later I heard that it got accepted, much to my surprise. It was and is an intriguing piece still but I didn't felt that it reflected the sophistication of my earlier work.
But there it was on the opening day, displayed next to a grand piece by Laura Facey, one of Jamaica's much revered artists. The opening day of the 2008 Biennial was visited by many Jamaicans and I still hold it as one of my highlights of my tiny and modest contribution to the arts. Many of my Jamaican artist friends were there also, most with a piece to their name. My kids were present although they probably have no recollection of it anymore. I felt both accomplished and, as a result, sad and tired at the same time.
The relatively simple design was partially due to the fact that the core of the trunk was poor and unsuitable to work with so I had to chop it all away. Only the outer part of the wood was usable.
The design of the intertwined figures was inspired by nature as one would imagine. It could be a snapshot of a shoal of fish or perhaps spermatozoa battling to win the race. All figures have individual shapes but there is uniformity in the motion and direction of movement. I am always intrigued by the seemingly chaotic dynamics of groups moving in unison and my aim was to capture that in a static sculpture. I like to think I achieved that to some degree.
Sold
For some reason, long forgotten, I was interested in making a decorative lamp. This was my first attempt (only to be followed by Straight Line Perspective in 2009, two years later). If I remember well the wood was walnut. I must have spend weeks on the piece, hollowing it out. I do remember being quite pleased with it in the end, messing around with attaching a light on the inside. I wanted to create an impression of a curtain of beads with the light shining through. Connecting dots, something like that. The piece was displayed in an exhibition at a gallery in Kingston and appeared in a Jamaican newspaper article with a big picture. The only reason that I called it Lima was because we had just visited Peru. Another attempt to connect dots. We want to see patterns, even if they are not there and, in fact, become meaningless over time. Trying to give meaning to loose sand.
Sold
Ah, Revolver. My dear wife Donna's most favorite piece. She claims this to be hers in fact. Never, ever to be sold. A reminder of me if I was to pass before her.
The design is somewhat similar to one of my later pieces, Mademoiselle Popova. The emphasis here is on the revolving spiral that forms the main body. It was quite tricky to accomplish this. The wood, Jamaican oak coming from our own garden when we lived at The Pines in Kingston was rock hard so I had some faith it would hold. Carefully chipping away I had to consider the various angles of the curvatures to create the idea of a human figure. The longer, more upright twist in the bottom, symbolizing legs or perhaps a draping skirt. Then the second curve, a waistline, the most vulnerable part of the structure. Finally the upper part, an arm twisted around the head. A caressing gesture, consoling, or shielding from something.
I choose the title Revolver obviously because of the revolving design, but I was simultaneously thinking about the Beatles:'Happiness is a warm gun'.
This piece is a study into the ovule. This theme re-appears in my 2020 piece 'The beginning of the end of the beginning'. The growing embryo in the womb, or the developing seed in the ovule. What is the difference after all. The starting point of all sexually reproduced, eukaryotic life. Maybe I should rename the work 'Zygote' but that would be too explicit.
Of course there are references to the vagina and the penis.
It also looks a bit like an elaborate design for a paperclip to me now, decades after making it.
That is funny.
Sold
I wanted to create 3 different sinusoidal curves running next to each other so as to model waves. We were living on an island at the time after all. It was inevitable that I was going to be inspired by all that water surrounding us. The piece is now with my brother in Amsterdam who has it lying on its back, horizontal rather then upright which does it more justice. Some things simply need to be horizontal.
This piece was made at a time that Donna was pregnant with Max, our second born. It is completely hollowed out, ironically in that regard, which led to the name 'Corset'. The wood had come from one of the trees that had been chopped down near where we lived in Kingston and it was a beautifully hard wood. Imagining the bust of a lady in the trunk was easy from the beginning. I just had to emphasize the curvatures, the breasts, hips, buttocks and the curved belly leading down to that most sacred of places. The human body is a beautiful thing, the female body being the most supreme. Well, in my opinion anyway.
Hollowing it out was where most of the effort went into, when I think back now. It is always harder to chip away wood on the inside of any sculpture. And this wood was rock hard! It was a therapeutic effort, or at least, so I kept telling myself in order not to get bogged down by it.
There was no symbolism intended in creating a hollow lady at the time that your number one lady is pregnant. That might have been a bad omen after all! The foremost reason was that the piece was commissioned by a befriended lady in England, one of Donna's former work colleagues. This meant it had to be shipped and so I wanted to make it as light as possible. However, I always intend to make sculptures as light as possible because of aesthetics and this piece was no exception. To have a relatively thin wall define the outline of a body has a geometric appeal that a solid piece would have not accomplished. And the work could always serve as an umbrella holder - I kept myself amused with this thought during the effort of removing the insides in order to keep my sanity.
I have not seen this piece in real life since 2007 but Donna went to visit the buyer a few years ago. She told me the sculpture was beautiful and that it had made an impact on her a second time. I am happy this young lady, graciously defined by her outline, has found a loving home.
Sold
A thin piece of cedar wood. What was I going to do? So many options. That is the interesting thing about sculpting. There is an infinity of possible shapes you can make, especially in 3D. It is almost overwhelming and a reason for joy as well as frustration. At some point you have to settle for something and just create that what has entered the mind and got kept afloat among many other ideas. I must have been thinking about sperm a lot at the time I suppose (although the sperm shape reappears in later works again so it was an ongoing theme). I think Donna and I were trying to get pregnant again at the time which could explain that slight perversity. Cultivating another child so to speak - although that is a very artistic interpretation of the word 'cultivating'. Maybe it was my intrigue with chaos and the dynamic motion of shoals of fish. More likely a bit of both. I always enjoy making connections between different phenomena that share a bit of common ground, however thin. I suppose we're all looking for patterns in the big whirlpool to make sense of it all.
The piece was exhibited in the annual 'Kingston on the Edge' or KOTE 2008 together with some other sculptures. I made a little video recording of the event, showing me and some of our beautiful friends at the time. The exhibit was on top of one of the highest buildings overlooking the Kingston downtown area. When setting it up a strong wind came over and knocked this piece down to the ground from a 1.5 meter high pedestal. One of the tails snapped inevitably and I had to rush back home to glue it back on before the opening of the event. I thought it was all funny at the time, just one of those things that happens. Life in Kingston was good and we had made some good friends who enjoyed the good life. Rum, dance hall, whining, the view of the Caribbean. No need to care about broken tails.
Sold
The very first piece that I created in Jamaica once we arrived there in 2007. A new adventure had just begun. Donna was working as an OT in Kingston and apart from having a 9 month old baby in the house I had my hands free to start sculpting again. I had recently invested in a good set of (second hand) tools, including some 'Nooitgedacht' chisels which are a classic, super strong brand. Time to put those into action therefore.
Cedar is a nice wood to work with but not all that strong so the design was deliberately sturdy but with enough detail and curvature to make it interesting. It is a shell. obviously, which figures giving the environment that we had moved into. A bit predictable perhaps. It also reminds me of a string instrument to add another dimension to the design. Perhaps the notion that you can hear the ocean through shells had carried me away a bit. Initially I had given it to Donna for her birthday but then somebody offered to buy it after it had been exhibited at the Olympia Gallery (with thanks to Rosemary Thwaites). It took some convincing before Donna was willing to let it go (I gave her Revolver, a later piece as a replacement). I remember that filing and sanding the inside curvature of the shell drove me nuts. I am a perfectionist. I can't stand curves that are not smooth, if they are intended to be smooth that is. What you can achieve in this regard is so dependent on the availability of specialized tools (think curved chisels, files). The tools that I have determine the shape and finesse of a piece, perhaps more than my imagination. One always works within the limitation of available tools and the level of expertise in applying them. The rest is just grit. This goes well beyond the scope of sculpting. I am inclined to say this an universal truth.
This piece was created out of an ordinary plank that I had taken from a building site in Sumatra, Indonesia. Donna and I were both working in Meulaboh in the year after the tsunami that hit SE Asia on the 26th of December, 2004. When we arrived in August 2005 large parts of the town were completely flattened, with only the foundation of houses indicating where people had once lived. Meulaboh was hit by a series of 7 waves which instantly killed one third of its original population of 120.000 people. I am sure you can do the math but that is 40.000 people in one go. Just let that sink in a bit. One in every three people. The emotional trauma is evident. Collecting, identifying and burying that many bodies in a devastated town, which has to be done fast in a tropical country, is a logistical nightmare regardless of the emotional impact.
At the time that I was working there, I didn't know that it was 7 consecutive waves. It is a bit chilling that this piece has exactly that number of rolling waves following each other.
Crafted from a beautiful piece of Zambian wood, this Masked Lady has many of the trade marks that I tend to put into the female figures that I have created so far. What defines the female body? I have never objected to a firm set of rounded thighs to begin with. In other feminine sculptures I emphasized breasts a lot as well. My first attempt at breasts (Lady Bird, 2002) is perhaps still the best. It is not easy to sculpt breasts to be honest. The wood doesn't care, you are all alone in defining the breasts, every stroke counts. You can do one breast quite well, but then there is the second one that needs to be symmetrical. Does it need to be symmetrical though? We appreciate symmetry in human faces and they are an almost universal criterion for beauty, in most cultures that I am aware of anyway. Why does a sculpture need to be beautiful though? Do different rules apply in art? I don't think Picasso was a big follower of symmetry. Personally I do like to create sculptures that are symmetrical and I aim to create something beautiful.
This is most likely the reason that everybody knows Picasso and nobody knows me.
Sold
This piece was made while I was living and working in Zambia as a VSO volunteer from 2003 to 2005. It was made entirely with small axes used by local craftsmen.
That is the short version, I will leave it at this for now and possibly elaborate further at some later stage (cause the story is much longer then this).
In 2019 I had a stand made for the piece in Lao PDR. This literally lifts it up to a higher level and it floats like this in our living room. A sweet reminder of our time in Zambia (where my wife and I met).
This piece was made from a substantial block of elm wood. It was the second time I was doing a sculpting course at the Center for the Arts in Utrecht, The Netherlands. Every Monday evening I'd spend a few hours together with some other enthusiasts.
In 2021, almost 2 decades later, the piece needed some attention. It was slightly discolored and not as smooth as I wanted it. So I spent some time restoring it. I also decided to alter the title of the piece to Alexa. I imagine Alexa to look like this, a sexy robot.
The results are here.
My very first piece!
I needed a creative outlet at the time (well, still do). I was working as a project manager for a commercial educational institute located in Amsterdam. Most days I would spend visiting companies, dressed in a suit, being all representative in a way that I had never imagined myself to be.
My father had been a carpenter and with the smell of sawdust lingering in my nostrils the choice for wood sculpting was straight forward. I signed up for a course at the Center for the Arts in Utrecht, The Netherlands, and found myself chiseling away every Monday evening. And I liked it! The ability to create something from wood with a rudimentary set of tools was liberating in a way and just what I needed.
In 2021 the piece had been exposed to sunlight and needed some tender, love and care. I restored it to its original state and coated it with beewax to bring out its shine. Here is the result.