Using a Socket Weld, a pipe can be put into the recessed area of a Valve, fitting, or flanged and welded into place. Fillet-type seal welds are used to link pipe to Valves and fittings or to other sections of pipe. If the benefits of excellent leakage integrity and structural strength are essential to design concerns, socket-welded joints are a desirable option.
A collection of high-pressure pipe fittings and Pipeline Products manufacturers are offered in three ratings: Class 3000lb, Class 6000lb, and Class 9000lb. To ensure good flow characteristics, they are employed in regions where pipe work is permanently installed. When used in conjunction with ASME Pipe, they’re offered in the same assortment of sizing options. You can find ss elbow manufacturers in India searching on Google.
Using a Socket Weld Coupling, a pipe can be put into the recessed area of a valve, fitting, or flange and then welded into place. On the other hand, A Full Coupling is designed to connect two pipes together or to a nipple, SS Socket Weld Couplings available in various dimensions, thicknesses, and standards.
To attach the pipe to valves and fittings or other pipe sections, fillet-type seal welds can be employed in the socket weld half coupling. It is possible to weld the Half Coupling to the run pipe straight to form a branch connection. These SS Socket Welding Half Couplings can also be produced to order in a variety of sizes, thicknesses, and standards to meet the needs of customers.
Pipe ends are sealed with our Socket Weld Cap. Wherever excellent leakage integrity and considerable structural strength are critical design factors, the Socket-welded Cap is a good alternative.
Our Socket Weld Crosses create a 90-degree branch from the main length of pipe, making it easier to install. Fire, poisonous, or expensive substance is assigned to these lines, and no leakage is permitted. SS Socket Weld Crosses are also available in a variety of sizes, thicknesses, and standards to meet the needs of our customers.
The stainless steel tee makes the 90-degree branch from the main flow of the pipe. To ensure good flow characteristics, they are employed in regions where pipework is permanently installed.
Our Socket Weld is the best in the business. The 45-Degree Elbow is used to produce 45-degree turns in a pipe run. No angles are required for weld preparation, and threaded connections can be utilised instead, making leaking much less of a concern.
Using our Socket Weld 90 Degree Elbow, you can change the direction of the pipe’s flow by 90 degrees. Because radiography is useless on the fillet weld in these kinds of fittings, proper fitting and welding are needed.
Stainless Steel Reducer primary purpose is to reduce the curvature of a larger pipe to a smaller size, resulting in more run pressure than previously. The manufacturing process itself strictly controls these reducers’ lengths.