Color: White
Temperature Range: -40° to 180° F
Tensile Strength: 4,350-5,800 psi (Poor)
Impact Strength: 16.8 ft.-lbs./in. (Excellent)
Hardness: Durometer 65D-67D (Medium)
For Use Outdoors: No
Offering a low-friction surface that prevents sticking and binding, these rods and discs are often machined into bushings and bearings. UHMW is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.
Color: Brown
Temperature Range: -40° to 185° F
Tensile Strength: 7,690-8,100 psi (Good)
Impact Strength: 0.7-1 ft.-lbs./in. (Poor)
Hardness: Rockwell R115-R118 (Hard)
For Use Outdoors: No
Specifications Met: ASTM D6100, ASTM D6778, UL 94 HB
While just as dimensionally stable and machinable as standard Delrin® acetal resin rods and discs, these have a PTFE filler to make them more slippery and wear resistant. Fabricate them into pump components, gears, and bearings. acetal resin is also known as acetal photopolymer.
PERFORMANCE PROPERTIES:
Chemical Resistant
Clear
Easy to Thermoform
Electrical Insulator
Flame Resistant
Flame Retardant
Food Contact
For Use Outdoors
Heat Transfer
High Strength
High Temperature
Impact Resistant
Low Thermal Expansion
Low Thermal Mass
Low Water Absorption
Metal Detectable
Multipurpose
Slippery
Static Control
Structural Support
UV Resistant
Warp Resistant
Wear Resistant
Weather Resistant
X-Ray Detectable
PLASTICS:
Aquasys 120
Aramid Fiber
Carbon Fiber
Fabric
Fiberglass
Garolite
Hard Fiber
Kevlar
Plastic
Plastic/Rubber Blend
Rubber
Steel/Plastic Blend
FLEXIBILITY :
Flexible
Semi-Flexible
Semi-Rigid
Rigid
Not Rated
