There are varied challenges that people from the petroleum industry face. The need is to continuously work in an ambience where the problems like dust and heat cause issues. Not only these even they face strict regulations and there is a need that this industry continues performing and there are no shutdowns now and then. Along with all these complications, there is also the need for reducing the costs so that the competitiveness is ensured. Most complications are found inside the components and systems and the lubrication problem, problematic gearbox and the environmental impact mustn't reduce the efficiency of the equipment. Reliability and efficiency are to be maintained and for this magnetic couplings can certainly assist.

What do the magnetic couplings do?

These couplings engage the permanent magnets for transferring the torque. Significant benefits are provided especially in the areas where the replacement of the systems/components or the shutdown of the production lines happen for adjusting both reliability and maintenance.

Let us in this article know more about this coupling-

Magnetic coupling transfers torque-

This coupling resembles other coupling type and has been created for transferring the torque from shaft to shaft. So the question arises that what makes this coupling varied from others? This coupling is apart as the transfer is performed without a physical mechanical connection. This feature, therefore, makes them suitable for fluid pumping applications. Another benefit which needs to be highlighted is that along thin barriers connection could be made. This helps in better functioning, therefore.

Magnetic coupling does not lead to wear-

Another advantage of this coupling is that as there is no contact so the wear does not happen. Wear normally happens when there are contacting parts and in case of magnetic coupling, the contact is not there.

These couplings are efficient-

As these couplings engage the permanent magnets so they do not require the external power source.

These couplings are also having a safety feature built within them. So if there is an overload on coupling then the coupling would shift to another position and then keep functioning.

For these couplings, you can engage the magnets. You will need the Ceramic ferrite magnets and the best manufacturers for the same might be looked for by you.

Even the need could be of the Magnetic Actuator. If you are looking for the best magnets then you can connect with us as we are the permanent magnet manufacturers.