HDO ,H20 BEAMS , POST SHORES

PVC HDO Plywood Form

• For architectural-smooth, textured or coated concrete

• Reduces potential vibrator damage

• Balanced construction ensures panel stability

• Minimal wood grain & no patch transfer

• Increased pours & reduced cost/pour

Deco PVC Multi-pour HDO is premium, high-density plywood with excellent surface durability for high gloss finishes. The PVC surface will perform architectural finish upon every pours.

Panel Construction/Moisture Resistance: Manufactured with mix hardwood inner ply. It is manufactured with a two-step layup, has a waterproof glue bond.

Working Faces/Treatment: • Multi-pour is hard pressed with two working faces: High gloss PVC. Edges are pressed and sealed with same materials. Release agent on the board is recommended for each pour, but most contractors found that isnot required from their past experiences, concrete would not affect the PVC surface.

Pour ranges: Horizontal deck 15-20 pours; Vertical wall and columns 30-40 pours. Both sides utilized.

Pour ranges are not guaranteed because the number of pours will vary due to jobsite handling and panel maintenance, vertical or horizontal use, form release agent, concrete mix design/strength, and other factors.

Stress and Load Span Tables: These stress and load span tables simulate actual wet form conditions.

face grain across supports face grain along supports.

thickness 1/2" smooth both size

Available sizes 4' X 8' and 4' X10"

thickness 5/8" smooth both size

Available sizes 4' X 8' , 4' X 9' X 4' X 10'

5/8" both side texture

Available size 4' x 8'

Thickness 3/4" smooth both size

Available sizes 4' X 8' and 4' X 10"

3/4" one side smooth , one side texture

Available size 4' X 8'

High Density Overlay (HDO) Plyform

HDO IMPORT BROWN Phenolic FILM:

Available thickness: 5/8" 3/4"

SIZE: 4' X 8'

HDO WHITE 100 overlay on plywood with pine construction.

• Excellent for engineers systems

• Enhanced Alkalinity resistance vs. Pine faced HDO

• Dense hardwood face produces uniform concrete surface/color

• Controlled hydration reduces Tuger Striping

• Minimal wood grain & no patch transfer

• Increased # of pours & reduced cost/pour

H20 Timber Beams

AVAILABLE SIZES

11’10” , 12’10” , 16”

H20 Timber Beams are solid-webbed beams made of wood or wood-based material exclusively for use in wall and floor formwork.

H20 Timber Beams end reinforcement significantly reduces damage to the beam ends.

H20 Timber Beams can be used only as formwork beams for floor and wall formwork and only when subjected to the loads occurring in situations of direct support for floor or wall formwork in structural concreting.

In order to maximize durability of the H20 Timber Beams it is important to handle the components with due care, particularly when stripping out floor-slab formwork.